summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2024-10-17phy: stm32: Remove unneeded semicolonYang Li
This patch removes an unneeded semicolon after a switch statement. ./drivers/phy/st/phy-stm32-combophy.c:226:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11403 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20241017040657.33992-1-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-17phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3Qiang Yu
Currently driver supports only x4 lane based functionality using tx/rx and tx2/rx2 pair of register sets. To support 8 lane functionality with PCIe3, PCIe3 related QMP PHY provides additional programming which are available as txz and rxz based register set. Hence add txz and rxz based registers usage and programming sequences. As soon as software programs the txz and rxz based register set, hardware shall "broadcast" the same settings to the tx/rx pair of registers for all the 8 lanes, which saves the effort of software programming them one by one. There might be some tx and/or rx registers on some lanes need minor tweaks, program them after programming the txz and rxz reigster set. In addition, x1e80100 uses QMP PHY ver 6.30 for PCIe Gen4 x8, hence add two new header files to reflect the new register offsets. Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Link: https://lore.kernel.org/r/20241017030412.265000-5-quic_qianyu@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-11phy: qcom: qmp: Add qmp configuration for QCS8300Krishna Kurapati
Add qmp configuration for QCS8300. It is similar to SA8775P and SC8280XP except for some Lane configuration settings specific to QCS8300. Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241009195348.2649368-5-quic_kriskura@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-11phy: ti: gmii-sel: Enable USXGMII mode for J7200Siddharth Vadapalli
TI's J7200 SoC supports USXGMII mode with the CPSW5G instance's MAC Port1. Add USXGMII mode to the extra_modes member of J7200's SoC data. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20241010144845.2555983-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-11phy: usb: disable COMMONONN for dual modeJustin Chen
The COMMONONN bit suspends the phy when the port is put into a suspend state. However when the phy is shared between host and device in dual mode, this no longer works cleanly as there is no synchronization between the two. Fixes: 5095d045a962 ("phy: usb: Turn off phy when port is in suspend") Signed-off-by: Justin Chen <justin.chen@broadcom.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241010185344.859865-1-justin.chen@broadcom.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: stm32: Add support for STM32MP25 COMBOPHY.Christian Bruel
Addition of the COMBOPHY driver found on STM32MP25 platforms This single lane PHY is shared (exclusive) between the USB3 and PCIE controllers. Supports 5Gbit/s for PCIE gen2 or 2.5Gbit/s for PCIE gen1. Supports wakeup-source capability to wakeup system using remote-wakeup capable USB device Signed-off-by: Christian Bruel <christian.bruel@foss.st.com> Link: https://lore.kernel.org/r/20240930170847.948779-3-christian.bruel@foss.st.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts propertyJosua Mayer
CP11x UTMI PHY supports swapping D+/D- signals via digital control register 1. Add support for the "swap-dx-lanes" device-tree property, which lists the port-ids that should swap D+ and D-. The property is evaluated in probe and applied before power-on during mvebu_cp110_utmi_port_setup. Signed-off-by: Josua Mayer <josua@solid-run.com> Link: https://lore.kernel.org/r/20241002-mvebu-utmi-phy-v4-1-83783dc89b9d@solid-run.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control registerBartosz Wawrzyniak
Fix the value of SIERRA_DEQ_OPENEYE_CTRL_PREG and add a definition for SIERRA_DEQ_TAU_EPIOFFSET_MODE_PREG. This fixes the SGMII single link register configuration. Fixes: 7a5ad9b4b98c ("phy: cadence: Sierra: Update single link PCIe register configuration") Signed-off-by: Bartosz Wawrzyniak <bwawrzyn@cisco.com> Link: https://lore.kernel.org/r/20241003123405.1101157-1-bwawrzyn@cisco.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: phy-rockchip-inno-usb2: Use dev_err_probe() in the probe pathDragan Simic
Improve error handling in the probe path by using function dev_err_probe() instead of function dev_err(), where appropriate. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/d4ccd9fc278fb46ea868406bf77811ee507f0e4e.1725524803.git.dsimic@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: phy-rockchip-inno-usb2: Handle failed extcon allocation betterDragan Simic
Return the actual error code upon failure to allocate extcon device, instead of hardcoding -ENOMEM. Use dev_err_probe() to also log appropriate messages, which is fine because the containing function is used in the probe path. Helped-by: Heiko Stubner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/cc4995aa3e569be6bc23ca126b41fba82d50eeee.1725524802.git.dsimic@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: phy-rockchip-inno-usb2: Perform trivial code cleanupsDragan Simic
Perform a few trivial code cleanups, e.g. to obey the reverse Christmas tree rule, to avoid use of "{ ... }" code blocks where they aren't really needed, or to avoid line wrapping by using the 100-column width better. No intended functional changes are introduced by these code cleanups. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/adce7309f6fd9e1191c53bab552a8531d1a71216.1725524802.git.dsimic@manjaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: usb: update Broadcom driver table to use designated initializersSam Edwards
The Broadcom USB PHY driver contains a lookup table (`reg_bits_map_tables`) to resolve register bitmaps unique to certain versions of the USB PHY as found in various Broadcom chip families. Historically, this table was just kept carefully in sync with the "selector" enum every time the latter changed to ensure consistency. However, a recent commit [1] introduced two new enumerators but did not adjust the array for BCM4908, thus breaking the xHCI controller (and boot process) on this platform and revealing the fragility of this approach. Since these arrays are a little sparse (many elements are zero) and the position of the array elements is significant only insofar as they agree with the enumerators, designated initializers are a better fit than positional initializers here. Convert this table accordingly. [1] 4536fe9640b6 ("phy: usb: suppress OC condition for 7439b2") Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Link: https://lore.kernel.org/r/20241004034131.1363813-3-CFSworks@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-10-07phy: usb: Fix missing elements in BCM4908 USB init arraySam Edwards
The Broadcom USB PHY driver contains a lookup table (`reg_bits_map_tables`) to resolve register bitmaps unique to certain versions of the USB PHY as found in various Broadcom chip families. A recent commit (see 'fixes' tag) introduced two new elements to each chip family in this table -- except for one: BCM4908. This resulted in the xHCI controller not being initialized correctly, causing a panic on boot. The next patch will update this table to use designated initializers in order to prevent this from happening again. For now, just add back the missing array elements to resolve the regression. Fixes: 4536fe9640b6 ("phy: usb: suppress OC condition for 7439b2") Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241004034131.1363813-2-CFSworks@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-09-23Merge tag 'phy-for-6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New hw support: - Rcar usb2 support for RZ/G3S SoC - Nuvoton MA35 SoC USB 2.0 PHY driver Removed: - obsolete qcom,usb-8x16-phy bindings Updates: - 4 lane PCIe support for Qualcomm X1E80100 - Constify structure in subsystem update - Subsystem simplification with scoped for each OF child loop update - Yaml conversion for Qualcomm sata phy, Hiilicon hi3798cv200-combphy bindings" * tag 'phy-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits) phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings phy: renesas: rcar-gen3-usb2: Add support to initialize the bus phy: ti: j721e-wiz: Simplify with scoped for each OF child loop phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code phy: ti: gmii-sel: Simplify with dev_err_probe() phy: ti: am654-serdes: Use scoped device node handling to simplify error paths phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop phy: mediatek: xsphy: Simplify with scoped for each OF child loop phy: mediatek: tphy: Simplify with scoped for each OF child loop phy: hisilicon: usb2: Simplify with scoped for each OF child loop phy: cadence: sierra: Simplify with scoped for each OF child loop phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings phy: qcom: qmp-pcie: Configure all tables on port B PHY phy: airoha: adjust initialization delay in airoha_pcie_phy_init() dt-bindings: phy: socionext,uniphier: add top-level constraints phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100 ...
2024-09-18Merge tag 'for-v6.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - introduce power_supply_show_enum_with_available() helper - change usb_types from an array into a bitmask - fix early usage of power_supply_property_is_writeable() resulting in sysfs files not being writable - fix missing temp1_max_alarm attribute in power-supply's hwmon devices Drivers: - max1720x: expose nvmem device - brcmstb: cleanup driver to use latest APIs - max77693: expose input and charging current limit - max17042_battery: fix state of charge reading for devices without current sensing - axp20x_battery: add AXP717 support - axp20x_battery: fix min/max voltage properties - axp20x_usb_power: add AXP717 support - axp20x_usb_power: add DT based input current limit Documentation updates Misc minor cleanups and fixes" * tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits) power: supply: hwmon: Fix missing temp1_max_alarm attribute power: supply: Drop use_cnt check from power_supply_property_is_writeable() power: supply: ab8500: Constify struct kobj_type power: supply: max1720x: fix a double free on error in probe() power: supply: axp20x_battery: add support for AXP717 power: supply: axp20x_usb_power: Add support for AXP717 dt-bindings: power: supply: axp20x: Add AXP717 compatible dt-bindings: power: supply: axp20x: Add AXP717 compatible power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested" power: supply: Change usb_types from an array into a bitmask power: supply: sysfs: Move power_supply_show_enum_with_available() up power: supply: sysfs: Add power_supply_show_enum_with_available() helper power: supply: rt9467-charger: Remove "usb_type" property write support power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values power: supply: "usb_type" property may be written to power: supply: max1720x: add read support for nvmem mfd: axp20x: Add ADC, BAT, and USB cells for AXP717 power: supply: core: constify psy_tzd_ops power: reset: brcmstb: Do not go into infinite loop if reset fails power: reset: brcmstb: Use devm_register_sys_off_handler() ...
2024-09-03power: supply: Change usb_types from an array into a bitmaskHans de Goede
The bit_types array just hold a list of valid enum power_supply_usb_type values which map to 0 - 9. This can easily be represented as a bitmap. This reduces the size of struct power_supply_desc and further reduces the data section size by drivers no longer needing to store the array. This also unifies how usb_types are handled with charge_behaviours, which allows power_supply_show_usb_type() to be removed. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20240831142039.28830-7-hdegoede@redhat.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-08-30phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoCClaudiu Beznea
Add support for the Renesas RZ/G3S SoC. The support is similar with the rest of RZ/G2 devices with the except that the RZ/G3S needs bus initialization due to hardware limitation. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240822152801.602318-13-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: renesas: rcar-gen3-usb2: Add support to initialize the busClaudiu Beznea
The Renesas RZ/G3S need to initialize the USB BUS before transferring data due to hardware limitation. As the register that need to be touched for this is in the address space of the USB PHY, and the UBS PHY need to be initialized before any other USB drivers handling data transfer, add support to initialize the USB BUS. As the USB PHY is probed before any other USB drivers that enables clocks and de-assert the reset signals and the BUS initialization is done in the probe phase, we need to add code to de-assert reset signal and runtime resume the device (which enables its clocks) before accessing the registers. As the reset signals are not required by the USB PHY driver for the other USB PHY hardware variants, the reset signals and runtime PM was handled only in the function that initialize the USB BUS. The PHY initialization was done right after runtime PM enable to have all in place when the PHYs are registered. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://lore.kernel.org/r/20240822152801.602318-11-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: ti: j721e-wiz: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-11-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: ti: j721e-wiz: Drop OF node reference earlier for simpler codeKrzysztof Kozlowski
Drop OF node reference immediately after using it in syscon_node_to_regmap(), which is both simpler and typical/expected code pattern. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-10-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: ti: gmii-sel: Simplify with dev_err_probe()Krzysztof Kozlowski
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes the code also simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-9-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: ti: am654-serdes: Use scoped device node handling to simplify error pathsKrzysztof Kozlowski
Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Unlike in other typical of_node_get+syscon_node_to_regmap cases, the reference cannot be dropped immediately after syscon_node_to_regmap(), because further part of probe() uses it. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-8-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-7-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: mediatek: xsphy: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-6-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: mediatek: tphy: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-5-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: hisilicon: usb2: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-4-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: cadence: sierra: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-3-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: broadcom: brcm-sata: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-2-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-30phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loopKrzysztof Kozlowski
Use scoped for_each_available_child_of_node_scoped() when iterating over device nodes to make code a bit simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240826-phy-of-node-scope-v1-1-5b4d82582644@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHYHui-Ping Chen
Nuvoton MA35 SoCs support DWC2 USB controller. Add the driver to drive the USB 2.0 PHY transceivers. Signed-off-by: Hui-Ping Chen <hpchen0nvt@gmail.com> Link: https://lore.kernel.org/r/20240805030356.14565-3-hpchen0nvt@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29phy: qcom: qmp-pcie: Configure all tables on port B PHYQiang Yu
Currently, only the RX and TX tables are written to the second PHY (port B) when the 4-lanes mode is configured, but according to Qualcomm internal documentation, the pcs, pcs_misc, serdes and ln_shrd tables need to be written as well. Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240805-phy-qcom-qmp-pcie-write-all-tbls-second-port-v3-1-6967c6bf61d1@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29phy: airoha: adjust initialization delay in airoha_pcie_phy_init()Lorenzo Bianconi
Align phy-pcie initialization delay to the vendor sdk in airoha_pcie_phy_init routine and allow the hw to complete required configuration before proceeding Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/8af6f27857619f1e0dd227f08b8584ae8fb22fb2.1722959625.git.lorenzo@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-29phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100Abel Vesa
The sixth PCIe controller on X1E80100 can be used in either 4-lanes mode or 2-lanes mode. Add the configuration and compatible for the 4-lane mode. Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240823-x1e80100-phy-add-gen4x4-v3-2-b7765631ca01@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resumePiyush Mehta
On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not happening after the resume. This is because serdes registers are reset when FPD is off (in suspend state) and needs to be reprogrammed in the resume path with the same default initialization as done in the first stage bootloader psu_init routine. To address the failure introduce a set of serdes registers to be saved in the suspend path and then restore it on resume. Fixes: 4a33bea00314 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver") Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05phy: phy-rockchip-samsung-hdptx: Add clock provider supportCristian Ciocaltea
The HDMI PHY PLL can be used as an alternative dclk source to RK3588 SoC CRU. It provides more accurate clock rates required by VOP2 to improve existing support for display modes handling, which is known to be problematic when dealing with non-integer refresh rates, among others. It is worth noting this only works for HDMI 2.0 or below, e.g. cannot be used to support HDMI 2.1 4K@120Hz mode. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-4-6a2d2164e508@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05phy: phy-rockchip-samsung-hdptx: Enable runtime PM at PHY core levelCristian Ciocaltea
When a new PHY is created via [devm_]phy_create(), the runtime PM for it is not enabled unless the parent device (which creates the PHY) has its own runtime PM already enabled. Move the call to devm_pm_runtime_enable() before devm_phy_create() to enable runtime PM at PHY core level. With this change the ->power_on() and ->power_off() callbacks do not require explicit runtime PM management anymore, since the PHY core handles that via phy_pm_runtime_{get,put}_sync() when phy_power_on() and phy_power_off() are invoked. Hence drop the now unnecessary calls to pm_runtime_resume_and_get() and pm_runtime_put() helpers. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-2-6a2d2164e508@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05phy: phy-rockchip-samsung-hdptx: Explicitly include pm_runtime.hCristian Ciocaltea
Driver makes use of helpers from pm_runtime.h, but relies on the header file being implicitly included. Explicitly pull the header in to avoid potential build failures in some configurations. Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver") Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-1-6a2d2164e508@collabora.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-05phy: cadence-torrent: add support for three or more links using 2 protocolsSiddharth Vadapalli
The Torrent SERDES can support at most two different protocols (PHY types). This only mandates that the device-tree sub-nodes used to represent the configuration should describe links with at-most two different protocols. The existing implementation however imposes an artificial constraint that allows only two links (device-tree sub-nodes). As long as at-most two protocols are chosen, using more than two links to describe them in an alternating configuration is still a valid configuration of the Torrent SERDES. A 3-Link 2-Protocol configuration of the 4-Lane SERDES can be: Lane 0 => Protocol 1 => Link 1 Lane 1 => Protocol 1 => Link 1 Lane 2 => Protocol 2 => Link 2 Lane 3 => Protocol 1 => Link 3 A 4-Link 2-Protocol configuration of the 4-Lane SERDES can be: Lane 0 => Protocol 1 => Link 1 Lane 1 => Protocol 2 => Link 2 Lane 2 => Protocol 1 => Link 3 Lane 3 => Protocol 2 => Link 4 Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20240805092607.143869-1-s-vadapalli@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: ti: phy-j721e-wiz: convert comma to semicolonChen Ni
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20240710031626.2003110-1-nichen@iscas.ac.cn Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: exynos5-usbdrd: fix error code in probe()Dan Carpenter
Return negative -ENOMEM instead of positive ENOMEM. Fixes: 497ddafe915e ("phy: exynos5-usbdrd: convert Vbus supplies to regulator_bulk") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/a956a3e2-c6ce-4f07-ad80-ec8a96e00d16@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: marvell: phy-mvebu-cp110-comphy: improve eth_port1 on comphy4Stefan Eichenberger
According to the CN9100_MPP_information document, CP_SRD4 (comphy 4) supports 2500 BASE-X and 5000 BASE-R for ETH_PORT1. I was able to test that 2500 BASE-X is indeed supported. Unfortunately, our HW does not support 5000 BASE-R, but I assume from the document that it does, so I set the muxing there too to 0x1. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Link: https://lore.kernel.org/r/20240711131612.98952-1-eichest@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: fsl-imx8mq-usb: fix tuning parameter nameXu Yang
According to fsl,imx8mq-usb-phy.yaml, this tuning parameter should be fsl,phy-pcs-tx-deemph-3p5db-attenuation-db. Fixes: 63c85ad0cd81 ("phy: fsl-imx8mp-usb: add support for phy tuning") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240801124642.1152838-1-xu.yang_2@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-08-04phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisationAbel Vesa
Update the PCIe Gen4 PHY init sequence with the latest based on internal Qualcomm documentation. Fixes: 606060ce8fd0 ("phy: qcom-qmp-pcie: Add support for X1E80100 g3x2 and g4x2 PCIE") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240801-x1e80100-phy-qmp-pcie-fix-config-v2-1-cdc0f22b4169@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: qcom: qmp: Add debug prints for register writesManivannan Sadhasivam
These register prints are useful to validate the init sequence against the Qcom internal documentation and also to share with the Qcom hw engineers to debug issues related to PHY. Sample debug prints: qcom-qmp-pcie-phy 1c0e000.phy: Writing Reg: QSERDES_V5_COM_SYSCLK_EN_SEL Offset: 0x0094 Val: 0xd9 qcom-qmp-pcie-phy 1c0e000.phy: Writing Reg: QSERDES_V5_COM_HSCLK_SEL Offset: 0x0158 Val: 0x11 Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240731152548.102987-1-manivannan.sadhasivam@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence: Sierra: Constify a u32[]Christophe JAILLET
'cdns_sierra_pll_mux_table' is not modified in this driver. And it is only used as a "const u32 *". Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 60937 3894 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o After: ===== text data bss dec hex filename 60897 3878 16 64791 fd17 drivers/phy/cadence/phy-cadence-sierra.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/43d881d52e3c1632ad197d4c2c18b6c481a13b24.1720723132.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence: Sierra: Constify struct cdns_sierra_valsChristophe JAILLET
'struct cdns_sierra_vals' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 60521 4310 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o After: ===== text data bss dec hex filename 60937 3894 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/0ccfd259fdf40475c89cfb22a64c6388e7c646b4.1720723132.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence: Sierra: Constify struct cdns_reg_pairsChristophe JAILLET
'struct cdns_reg_pairs' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 60489 4342 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o After: ===== text data bss dec hex filename 60521 4310 16 64847 fd4f drivers/phy/cadence/phy-cadence-sierra.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/c57ee8206ebba8c222d7d954335654384072b9ac.1720723132.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence-torrent: Constify a u32[]Christophe JAILLET
'cdns_torrent_refclk_driver_mux_table' is not modified in this driver. And it is only used as a "const u32 *". Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 93578 4798 16 98392 18058 drivers/phy/cadence/phy-cadence-torrent.o After: ===== text data bss dec hex filename 93606 4790 16 98412 1806c drivers/phy/cadence/phy-cadence-torrent.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/34e23ceb6b7b7eb730ee8deee21d231b504dc65f.1720718240.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence-torrent: Constify struct cdns_torrent_valsChristophe JAILLET
'struct cdns_torrent_vals' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 92234 6078 16 98328 18018 drivers/phy/cadence/phy-cadence-torrent.o After: ===== text data bss dec hex filename 93578 4798 16 98392 18058 drivers/phy/cadence/phy-cadence-torrent.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d9d135ee9b806726766a1bc5e1404267939aa637.1720718240.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-07-31phy: cadence-torrent: Constify struct cdns_torrent_vals_entryChristophe JAILLET
'struct cdns_torrent_vals_entry' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 85130 13214 16 98360 18038 drivers/phy/cadence/phy-cadence-torrent.o After: ===== text data bss dec hex filename 92234 6078 16 98328 18018 drivers/phy/cadence/phy-cadence-torrent.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dcc4e539999a840b3fd8f40fd8fd7523390232ac.1720718240.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-18 02:06:46 +0000