summaryrefslogtreecommitdiff
path: root/drivers/platform/x86
AgeCommit message (Collapse)Author
2024-04-08platform/x86: asus-wmi: Add support for MCU powersaveLuke D. Jones
Add support for an MCU powersave WMI call. This is intended to set the MCU in to a low-power mode when sleeping. This mode can cut sleep power use by around half. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-9-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: ROG Ally increase wait time, allow MCU powersaveLuke D. Jones
The previous work to allow the MCU to be resumed correctly after sleep and resume tried to take the shortest possible time. However as work continues in various other parts of the s2idle subsystems it has shown that it wasn't entirely reliable. If the MCU disable/enable call is done correctly the MCU fully removes its USB endpoints, and this shows as a full USB device reconnection on resume. When we tried to short this as much as possible sometimes the MCU doesn't get to complete what it needs to do before going to low-power and this affected the reconnection. Through trial it is found that the minimum time required is approx 1200ms to allow a proper disconnect and disable, and the same amount of time on resume is required to prevent a rapid disconnect/reconnect happening on seemingly random occasions. To be safe the time is now 1500ms for msleep. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-8-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: adjust formatting of ppt-<name>() functionsLuke D. Jones
Shift the call to dev_get_drvdata() up to top of the function block in all of the ppt_<name>() functions as part of a minor cleanup. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-7-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: store a min default for ppt optionsLuke D. Jones
Laptops with any of the ppt or nv tunables default to the minimum setting on boot so we can safely assume a stored value is correct. This patch adds storing of those values in the local struct, and enables reading of those values back. To prevent creating a series of byte holes in the struct the "<name>_available" bool is removed and `asus_sysfs_is_visible()` uses the `ASUS_WMI_DEVID_<name>` directly. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-6-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: support toggling POST soundLuke D. Jones
Add support for toggling the BIOS POST sound on some ASUS laptops. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-5-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: add support variant of TUF RGBLuke D. Jones
Adds support for a second TUF RGB wmi call that some versions of the TUF laptop come with. Also adjusts existing support to select whichever is available. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-4-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: add support for Vivobook GPU MUXLuke D. Jones
Add support for the Vivobook dgpu MUX available on the ASUS Viviobook and some of the other ranges (Zen). This MUX functions exactly the same as the existing ROG MUX support so the existing functionality now detects which MUX is available and uses that for control. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-3-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: asus-wmi: add support for 2024 ROG Mini-LEDLuke D. Jones
Support the 2024 mini-led backlight and adjust the related functions to select the relevant dev-id. Also add `available_mini_led_mode` to the platform sysfs since the available mini-led levels can be different. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240404001652.86207-2-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: xiaomi-wmi: Drop unnecessary NULL checksArmin Wolf
The WMI driver core already makes sure that: - a valid WMI device is passed to each callback - the notify() callback runs after the probe() callback succeeds Remove the unnecessary NULL checks. Compile-tested only. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240402143059.8456-3-W_Armin@gmx.de Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: xiaomi-wmi: Fix race condition when reporting key eventsArmin Wolf
Multiple WMI events can be received concurrently, so multiple instances of xiaomi_wmi_notify() can be active at the same time. Since the input device is shared between those handlers, the key input sequence can be disturbed. Fix this by protecting the key input sequence with a mutex. Compile-tested only. Fixes: edb73f4f0247 ("platform/x86: wmi: add Xiaomi WMI key driver") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240402143059.8456-2-W_Armin@gmx.de Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: wmi: Mark simple WMI drivers as legacy-freeArmin Wolf
The inspur_platform_profile driver and the xiaomi-wmi driver both meet the requirements for modern WMI drivers, as they both do not use the legacy GUID-based interface and can be safely instantiated multiple times. Mark them both as legacy-free using the no_singleton flag. Compile-tested only. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240402143059.8456-1-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: lg-laptop: fix %s null argument warningGergo Koteles
W=1 warns about null argument to kprintf: warning: ‘%s’ directive argument is null [-Wformat-overflow=] pr_info("product: %s year: %d\n", product, year); Use "unknown" instead of NULL. Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/33d40e976f08f82b9227d0ecae38c787fcc0c0b2.1712154684.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86: intel-vbtn: Update tablet mode switch at end of probeGwendal Grignou
ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as follow: Device (VGBI) { Name (_HID, EisaId ("INT33D6") ... Name (VBDS, Zero) Method (_STA, 0, Serialized) // _STA: Status ... Method (VBDL, 0, Serialized) { PB1E |= 0x20 VBDS |= 0x40 } Method (VGBS, 0, Serialized) { Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */ } ... } By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set) only after method VBDL is executed. Since VBDL is now evaluated in the probe routine later, after the device is registered, the retrieved value of VBDS was still 0 ("tablet mode") when setting up the virtual switch. Make sure to evaluate VGBS after VBDL, to ensure the convertible boots in clamshell mode, the expected default. Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86: intel-vbtn: Use acpi_has_method to check for switchGwendal Grignou
The check for a device having virtual buttons is done using acpi_has_method(..."VBDL"). Mimic that for checking virtual switch presence. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86: toshiba_acpi: Silence logging for some eventsHans de Goede
Stop logging unknown event / unknown keycode messages on suspend / resume on a Toshiba Portege Z830: 1. The Toshiba Portege Z830 sends a 0x8e event when the power button is pressed, ignore this. 2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from suspend, ignore this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86/intel/hid: Add Lunar Lake and Arrow Lake supportSumeet Pawnikar
Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86/intel/hid: Don't wake on 5-button releasesDavid McFarland
If, for example, the power button is configured to suspend, holding it and releasing it after the machine has suspended, will wake the machine. Also on some machines, power button release events are sent during hibernation, even if the button wasn't used to hibernate the machine. This causes hibernation to be aborted. Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation") Signed-off-by: David McFarland <corngood@gmail.com> Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-04-08platform/x86/wireless-hotkey: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/toshiba_haps: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/toshiba_bluetooth: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/toshiba_acpi: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/sony-laptop: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/lg-laptop: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/intel/smartconnect: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/intel/rst: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/eeepc: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86/dell: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform: classmate-laptop: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform: asus-laptop: drop owner assignmentKrzysztof Kozlowski
ACPI bus core already sets the .owner, so driver does not need to. Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-08platform/x86: intel-vbtn: Log event code on unexpected button eventsHans de Goede
When logging the warning about receiving a button event on a device without buttons log the event code which triggered the warning. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240327195712.43851-1-hdegoede@redhat.com
2024-04-08platform/x86: quickstart: Fix race condition when reporting input eventArmin Wolf
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on all CPUs"), the ACPI core allows multiple notify calls to be active at the same time. This means that two instances of quickstart_notify() running at the same time can mess which each others input sequences. Fix this by protecting the input sequence with a mutex. Compile-tested only. Fixes: afd66f2a739e ("platform/x86: Add ACPI quickstart button (PNP0C32) driver") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240327214524.123935-1-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: quickstart: fix Kconfig selectsArnd Bergmann
The new driver Kconfig entry has a typo that causes a link failure when CONFIG_INPUT_SPARSEKMAP is disabled: x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_notify': quickstart.c:(.text+0x96): undefined reference to `sparse_keymap_report_event' x86_64-linux-ld: drivers/platform/x86/quickstart.o: in function `quickstart_probe': quickstart.c:(.text+0x1da): undefined reference to `sparse_keymap_setup' Select this symbol instead of the incorrect INPUT_SPARSE_KEYMAP. Fixes: afd66f2a739e ("platform/x86: Add ACPI quickstart button (PNP0C32) driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240404123435.2684819-1-arnd@kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: quickstart: Miscellaneous improvementsAndy Shevchenko
There is a mix of a few improvements to the driver. I have done this instead of review, so it can quickly be folded into the original code (partially or fully). Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240327215208.649020-1-andy.shevchenko@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86/amd/hsmp: switch to use device_add_groups()Greg Kroah-Hartman
devm_device_add_groups() is being removed from the kernel, so move the hsmp driver to use device_add_groups() instead. The logic is identical, when the device is removed the driver core will properly clean up and remove the groups, and the memory used by the attribute groups will be freed because it was created with dev_* calls, so this is functionally identical overall. Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com> Cc: Carlos Bilbao <carlos.bilbao@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/2024032732-thigh-smite-f5dd@gregkh Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: toshiba_acpi: Add quirk for buttons on Z830Arvid Norlander
The Z830 has some buttons that will only work properly as "quickstart" buttons. To enable them in that mode, a value between 1 and 7 must be used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for maximum predictability and compatibility. As there is not yet a known way of auto detection, this patch uses a DMI quirk table. A module parameter is exposed to allow setting this on other models for testing. Signed-off-by: Arvid Norlander <lkml@vorpal.se> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240131111641.4418-3-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: Add ACPI quickstart button (PNP0C32) driverArmin Wolf
This drivers supports the ACPI quickstart button device, which is used to send manufacturer-specific events to userspace. Since the meaning of those events is not standardized, userspace has to use for example hwdb to decode them. The driver itself is based on an earlier proposal, but contains some improvements and uses the device wakeup API instead of a custom sysfs file. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240131111641.4418-2-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: x86-android-tablets: Add swnode for Xiaomi pad2 indicator LEDKate Hsuan
There is a KTD2026 LED controller to manage the indicator LED for Xiaomi pad2. The ACPI for it is not properly made so the kernel can't get a correct description of it. This work adds a description for this RGB LED controller and also sets a trigger to indicate the charging event (bq27520-0-charging). When it is charging, the indicator LED will be turned on. Signed-off-by: Kate Hsuan <hpa@redhat.com> Link: https://lore.kernel.org/r/20240322033736.9344-2-hpa@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: add lenovo WMI camera button driverAi Chao
Add lenovo WMI camera button driver to support camera button. The Camera button is a GPIO device. This driver receives ACPI notifications when the camera button is switched on/off. This driver is used in Lenovo A70, it is a Computer integrated machine. Signed-off-by: Ai Chao <aichao@kylinos.cn> Link: https://lore.kernel.org/r/20240327082737.336992-1-aichao@kylinos.cn Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-04-08platform/x86: acer-wmi: Add support for Acer PH18-71Bernhard Rosenkränzer
Add Acer Predator PH18-71 to acer_quirks with predator_v4 to support mode button and fan speed sensor. Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-03-25platform/x86: wmi: Avoid returning AE_OK upon unknown errorArmin Wolf
If an error code other than EINVAL, ENODEV or ETIME is returned by ec_read()/ec_write(), then AE_OK is wrongly returned. Fix this by only returning AE_OK if the return code is 0, and return AE_ERROR otherwise. Tested on a Dell Inspiron 3505 and a Asus Prime B650-Plus. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240314184538.2933-2-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: wmi: Support reading/writing 16 bit EC valuesArmin Wolf
The ACPI EC address space handler currently only supports reading/writing 8 bit values. Some firmware implementations however want to access for example 16 bit values, which is perfectly legal according to the ACPI spec. Add support for reading/writing such values. Tested on a Dell Inspiron 3505 and a Asus Prime B650-Plus. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20240314184538.2933-1-W_Armin@gmx.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: uv_sysfs: use sysfs_emit() instead of sprintf()Ai Chao
Follow the advice in Documentation/filesystems/sysfs.rst: show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Ai Chao <aichao@kylinos.cn> Link: https://lore.kernel.org/r/20240319070038.309683-1-aichao@kylinos.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: huawei-wmi: use sysfs_emit() instead of sprintf()Ai Chao
Follow the advice in Documentation/filesystems/sysfs.rst: show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Ai Chao <aichao@kylinos.cn> Link: https://lore.kernel.org/r/20240319064243.297320-1-aichao@kylinos.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: asus-wmi: use sysfs_emit() instead of sprintf()Ai Chao
This changes all *_show attributes in asus-wmi.c to use sysfs_emit() instead of the older method of writing to the output buffer manually. Follow the advice in Documentation/filesystems/sysfs.rst: show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Ai Chao <aichao@kylinos.cn> Link: https://lore.kernel.org/r/20240319055636.150289-1-aichao@kylinos.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: hp-wmi: use sysfs_emit() instead of sprintf()Ai Chao
Follow the advice in Documentation/filesystems/sysfs.rst: show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Ai Chao <aichao@kylinos.cn> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240314063703.315841-1-aichao@kylinos.cn Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-25platform/x86: p2sb: Make p2sb_get_devfn() return voidHans de Goede
p2sb_get_devfn() always succeeds, make it return void and remove error checking from its callers. Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240305094500.23778-1-hdegoede@redhat.com
2024-03-14Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ...
2024-03-14Merge tag 'sound-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This was a relatively calm development cycle. Most of changes are rather small device-specific fixes and enhancements. The only significant changes in ALSA core are code refactoring with the recent cleanup infrastructure, which should bring no functionality changes. Some highlights below: Core: - Lots of cleanups in ALSA core code with automatic kfree cleanup and locking guard macros - New ALSA core kunit test ASoC: - SoundWire support for AMD ACP 6.3 systems - Support for reporting version information for AVS firmware - Support DSPless mode for Intel Soundwire systems - Support for configuring CS35L56 amplifiers using EFI calibration data - Log which component is being operated on as part of power management trace events. - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x HD- and USB-audio: - More Cirrus HD-audio codec support - TAS2781 HD-audio codec fixes - Scarlett2 mixer fixes Others: - Enhancement of virtio driver for audio control supports - Cleanups of legacy PM code with new macros - Firewire sound updates" * tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits) ALSA: usb-audio: Stop parsing channels bits when all channels are found. ALSA: hda/tas2781: remove unnecessary runtime_pm calls ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models ALSA: aaci: Delete unused variable in aaci_do_suspend ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again ALSA: scarlett2: Fix Scarlett 4th Gen input gain range ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection ALSA: hda/tas2781: restore power state after system_resume ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend ALSA: hda/tas2781: add lock to system_suspend ALSA: hda/tas2781: use dev_dbg in system_resume ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57 ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57 ASoC: cs35l56: Add support for CS35L54 and CS35L57 ASoC: Intel: catpt: Carefully use PCI bitwise constants ALSA: hda: hda_component: Include sound/hda_codec.h ALSA: hda: hda_component: Add missing #include guards ...
2024-03-14Merge tag 'platform-drivers-x86-v6.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Ilpo Järvinen: - New acer-wmi HW support - Support for new revision of amd/pmf heartbeat notify - Correctly handle asus-wmi HW without LEDs - fujitsu-laptop battery charge control support - Support for new hp-wmi thermal profiles - Support ideapad-laptop refresh rate key - Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to allow entry into low-power modes, and temporarily removed Lunar Lake SSRAM support due to breaking FW changes causing probe fail (further breaking FW changes are still pending) - Report pmc/punit_atom devices that prevent reacing low power levels - Surface Fan speed function support - Support for more sperial keys and complete the list of models with non-standard fan registers in thinkpad_acpi - New DMI touchscreen HW support - Continued modernization efforts of wmi - Removal of obsoleted ledtrig-audio call and the related dependency - Debug & metrics interface improvements - Miscellaneous cleanups / fixes / improvements * tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits) platform/x86/intel/pmc: Improve PKGC residency counters debug platform/x86: asus-wmi: Consider device is absent when the read is ~0 Documentation/x86/amd/hsmp: Updating urls platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles platform/x86/amd/pmf: Add support to get sps default APTS index values platform/x86/amd/pmf: Add support to get APTS index numbers for static slider platform/x86/amd/pmf: Add support to notify sbios heart beat event platform/x86/amd/pmf: Add support to get sbios requests in PMF driver platform/x86/amd/pmf: Disable debugfs support for querying power thermals platform/x86/amd/pmf: Differentiate PMF ACPI versions x86/platform/atom: Check state of Punit managed devices on s2idle platform/x86: pmc_atom: Check state of PMC clocks on s2idle platform/x86: pmc_atom: Check state of PMC managed devices on s2idle platform/x86: pmc_atom: Annotate d3_sts register bit defines clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h platform/x86: make fw_attr_class constant platform/x86/intel/tpmi: Change vsec offset to u64 platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h platform/x86: intel_scu_wdt: Remove unused intel-mid.h ...
2024-03-13Merge tag 'thermal-6.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly change the thermal core in a few ways allowing thermal drivers to be simplified, in particular in their removal and failing probe handling parts that are notoriously prone to errors, and propagate the changes to several drivers. Apart from that, support for a new platform is added (Intel Lunar Lake-M), some bugs are fixed and some code is cleaned up, as usual. Specifics: - Store zone trips table and zone operations directly in struct thermal_zone_device (Rafael Wysocki) - Fix up flex array initialization during thermal zone device registration (Nathan Chancellor) - Rework writable trip points handling in the thermal core and several drivers (Rafael Wysocki) - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi) - Use thermal zone accessor functions in the int340x Intel thermal driver (Rafael Wysocki) - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas Pandruvada) - Minor fixes for thermal governors (Rafael Wysocki, Di Shen) - Trip point handling fixes for the iwlwifi wireless driver (Rafael Wysocki) - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)" * tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: remove unnecessary check in trip_point_hyst_store() thermal: intel: int340x_thermal: Use thermal zone accessor functions thermal: core: Remove excess empty line from a comment thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID thermal: core: Eliminate writable trip points masks thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: core: Drop the .set_trip_hyst() thermal zone operation thermal: core: Add flags to struct thermal_trip thermal: core: Move initial num_trips assignment before memcpy() thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS thermal: intel: Adjust ops handling during thermal zone registration thermal: ACPI: Constify acpi_thermal_zone_ops thermal: core: Store zone ops in struct thermal_zone_device thermal: intel: Discard trip tables after zone registration thermal: ACPI: Discard trips table after zone registration thermal: core: Store zone trips table in struct thermal_zone_device ...
generated by cgit (git 2.34.1) at 2025-07-19 23:51:58 +0000