summaryrefslogtreecommitdiff
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2021-10-18rtc: pcf8523: remove unecessary ifdeferyAlexandre Belloni
If CONFIG_OF is not defined, of_property_read_bool will return false which is our default value Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018153651.82069-3-alexandre.belloni@bootlin.com
2021-10-18rtc: pcf8523: always compile pcf8523_rtc_ioctlAlexandre Belloni
Compiling out pcf8523_rtc_ioctl saves about 5% of the generated machine code. However, it certainly never happens as the RTC character device interface is the most useful one and is probably always compiled in. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018153651.82069-2-alexandre.belloni@bootlin.com
2021-10-18rtc: pcf8523: switch to regmapAlexandre Belloni
Use regmap to access the RTC registers, this is a huge reduction in code lines and generated code. Values on ARMv7: text data bss dec hex 5180 132 0 5312 14c0 before 3900 132 0 4032 fc0 after Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018153651.82069-1-alexandre.belloni@bootlin.com
2021-10-18rtc: expose RTC_FEATURE_UPDATE_INTERRUPTAlexandre Belloni
Set RTC_FEATURE_UPDATE_INTERRUPT by default and clear it when it is not supported. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018152337.78732-1-alexandre.belloni@bootlin.com
2021-10-18rtc: pcf8523: avoid reading BLF in pcf8523_rtc_read_timeAlexandre Belloni
BLF, battery low doesn't mean the time is imprecise or invalid, it simply mean the backup battery has to be replaced. This information can be read using the VL_READ ioctl. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211015192400.818254-1-alexandre.belloni@bootlin.com
2021-10-18rtc: rv3032: allow setting BSMAlexandre Belloni
Backup Switch Mode is currently set properly when the trickle charger is enabled. However, in the case of a non-rechargeable battery, it is necessary to be able to enable it, only allow that when the trickle charger is disabled. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-8-alexandre.belloni@bootlin.com
2021-10-18rtc: rv3028: add BSM supportAlexandre Belloni
Backup Switch Mode controls how the RTC decides when to switch to the backup power supply. As it is disabled by default, provide a way to enable and configure it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-7-alexandre.belloni@bootlin.com
2021-10-18rtc: add BSM parameterAlexandre Belloni
BSM or Backup Switch Mode is a common feature on RTCs, allowing to select how the RTC will decide when to switch from its primary power supply to the backup power supply. It is necessary to be able to set it from userspace as there are uses cases where it has to be done dynamically. Supported values are: RTC_BSM_DISABLED: disabled RTC_BSM_DIRECT: switching will happen as soon as Vbackup > Vdd RTC_BSM_LEVEL: switching will happen around a threshold, usually with an hysteresis RTC_BSM_STANDBY: switching will not happen until Vdd > Vbackup, this is useful to ensure the RTC doesn't draw any power until the device is first powered on. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-6-alexandre.belloni@bootlin.com
2021-10-18rtc: add correction parameterAlexandre Belloni
Add a new parameter allowing the get and set the correction using ioctls instead of just sysfs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-5-alexandre.belloni@bootlin.com
2021-10-18rtc: expose correction featureAlexandre Belloni
Add a new feature for RTCs able to correct the oscillator imprecision. This is also called offset or trimming. Such drivers have a .set_offset callback, use that to set the feature bit from the core. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-4-alexandre.belloni@bootlin.com
2021-10-18rtc: add parameter ioctlAlexandre Belloni
Add an ioctl allowing to get and set extra parameters for an RTC. For now, only handle getting available features. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211018151933.76865-3-alexandre.belloni@bootlin.com
2021-10-17rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependenciesWill McVicker
The config HAVE_S3C_RTC is not really needed since we can simply just add the dependencies directly to RTC_DRV_S3C. Also, one less config to keep track of! Signed-off-by: Will McVicker <willmcvicker@google.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211013212256.3425889-1-willmcvicker@google.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-15rtc: pcf85063: Always clear EXT_TEST from set_timePhil Elwell
Power-on reset after the insertion of a battery does not always complete successfully, leading to corrupted register content. The EXT_TEST bit will stop the clock from running, but currently the driver will never recover. Safely handle the erroneous state by clearing EXT_TEST as part of the usual set_time method. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211015111208.1757110-1-phil@raspberrypi.com
2021-10-15rtc: pcf85063: add support for fixed clockAlexander Stein
TQ-Systems' TQMa8Mx module (SoM) uses a pcf85063 as RTC. The default output is 32768Hz. This is to provide the i.MX8M CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX8M functionality depending on the 32 KHz clock will halt. In our case the whole system halts and a power cycle is required. Referencing the pcf85063 directly results in a deadlock. The kernel will see, that i.MX8M system clock needs the RTC clock and do probe deferral. But the i.MX8M I2C module never becomes usable without the i.MX8M CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss). A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX8M. This addresses the exact same issue as in commit f765e349c3e1 ("rtc: m41t80: add support for fixed clock"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [Fixed return value 0 -> NULL] Link: https://lore.kernel.org/r/20211013074954.997445-1-alexander.stein@ew.tq-group.com
2021-10-15rtc: rv3032: fix error handling in rv3032_clkout_set_rate()Dan Carpenter
Do not call rv3032_exit_eerd() if the enter function fails but don't forget to call the exit when the enter succeeds. Fixes: 2eeaa532acca ("rtc: rv3032: Add a driver for Microcrystal RV-3032") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211012101028.GT2083@kadam
2021-10-15rtc: class: check return value when calling dev_set_name()Yang Yingliang
I got a null-ptr-deref report when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0xc/0x20 Call Trace: __devm_rtc_register_device.cold.7+0x16a/0x2df rv3029_probe+0x4b1/0x770 [rtc_rv3029c2] rv3029_i2c_probe+0x141/0x180 [rtc_rv3029c2] i2c_device_probe+0xa07/0xbb0 really_probe+0x285/0xc30 If dev_set_name() fails, dev_name() is null, it causes null-ptr-deref, we need check the return value of dev_set_name(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211012041629.2504158-1-yangyingliang@huawei.com
2021-10-15rtc: class: don't call cdev_device_del() when cdev_device_add() failedYang Yingliang
I got a null-ptr-deref report when doing fault injection test: general protection fault, probably for non-canonical address 0xdffffc0000000022: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000110-0x0000000000000117] RIP: 0010:device_del+0x132/0xdc0 Call Trace: cdev_device_del+0x1a/0x80 devm_rtc_unregister_device+0x37/0x80 release_nodes+0xc3/0x3b0 If cdev_device_add() fails, 'dev->p' is not set, it causes null-ptr-deref when calling cdev_device_del(). Registering character device is optional, we don't return error code here, so introduce a new flag 'RTC_NO_CDEV' to indicate if it has character device, cdev_device_del() is called when this bit is not set. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211011132114.3663509-1-yangyingliang@huawei.com
2021-10-01rtc: m41t80: return NULL rather than a plain 0 integerColin Ian King
Function m41t80_sqw_register_clk returns a pointer to struct clk, so returning a plain 0 integer isn't good practice. Fix this by returning a NULL instead. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210925223441.182673-1-colin.king@canonical.com
2021-10-01rtc: msc313: Fix unintentional sign extension issues with left shift of a u16Colin Ian King
Shifting the u16 value returned by readw by 16 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. If the top bit of the readw is set then the shifted value will be sign extended and the top 32 bits of the result will be set. Fixes: be7d9c9161b9 ("rtc: Add support for the MSTAR MSC313 RTC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210928134654.991923-1-colin.king@canonical.com
2021-10-01rtc: mcp795: Add SPI ID tableMark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210927130240.33693-1-broonie@kernel.org
2021-09-27rtc: msc313: fix missing includeAlexandre Belloni
The driver needs io.h Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210927063724.312687-1-alexandre.belloni@bootlin.com
2021-09-26rtc: Add support for the MSTAR MSC313 RTCDaniel Palmer
This adds support for the RTC block on the Mstar MSC313e SoCs and newer. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Co-developed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210823171613.18941-3-romain.perier@gmail.com
2021-09-25rtc: rx6110: simplify getting the adapter of a clientWolfram Sang
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210918213553.14514-1-wsa+renesas@sang-engineering.com
2021-09-25rtc: s5m: drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210916164604.134924-1-krzysztof.kozlowski@canonical.com
2021-09-25rtc: omap: drop unneeded MODULE_ALIASKrzysztof Kozlowski
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210916164513.134725-1-krzysztof.kozlowski@canonical.com
2021-09-25rtc: pcf2123: Add SPI ID tableMark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210923194922.53386-4-broonie@kernel.org
2021-09-25rtc: ds1390: Add SPI ID tableMark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210923194922.53386-3-broonie@kernel.org
2021-09-25rtc: ds1302: Add SPI ID tableMark Brown
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210923194922.53386-2-broonie@kernel.org
2021-09-14rtc: cmos: Disable irq around direct invocation of cmos_interrupt()Chris Wilson
As previously noted in commit 66e4f4a9cc38 ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): <4>[ 254.192378] WARNING: inconsistent lock state <4>[ 254.192384] 5.12.0-rc1-CI-CI_DRM_9834+ #1 Not tainted <4>[ 254.192396] -------------------------------- <4>[ 254.192400] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. <4>[ 254.192409] rtcwake/5309 [HC0[0]:SC0[0]:HE1:SE1] takes: <4>[ 254.192429] ffffffff8263c5f8 (rtc_lock){?...}-{2:2}, at: cmos_interrupt+0x18/0x100 <4>[ 254.192481] {IN-HARDIRQ-W} state was registered at: <4>[ 254.192488] lock_acquire+0xd1/0x3d0 <4>[ 254.192504] _raw_spin_lock+0x2a/0x40 <4>[ 254.192519] cmos_interrupt+0x18/0x100 <4>[ 254.192536] rtc_handler+0x1f/0xc0 <4>[ 254.192553] acpi_ev_fixed_event_detect+0x109/0x13c <4>[ 254.192574] acpi_ev_sci_xrupt_handler+0xb/0x28 <4>[ 254.192596] acpi_irq+0x13/0x30 <4>[ 254.192620] __handle_irq_event_percpu+0x43/0x2c0 <4>[ 254.192641] handle_irq_event_percpu+0x2b/0x70 <4>[ 254.192661] handle_irq_event+0x2f/0x50 <4>[ 254.192680] handle_fasteoi_irq+0x9e/0x150 <4>[ 254.192693] __common_interrupt+0x76/0x140 <4>[ 254.192715] common_interrupt+0x96/0xc0 <4>[ 254.192732] asm_common_interrupt+0x1e/0x40 <4>[ 254.192750] _raw_spin_unlock_irqrestore+0x38/0x60 <4>[ 254.192767] resume_irqs+0xba/0xf0 <4>[ 254.192786] dpm_resume_noirq+0x245/0x3d0 <4>[ 254.192811] suspend_devices_and_enter+0x230/0xaa0 <4>[ 254.192835] pm_suspend.cold.8+0x301/0x34a <4>[ 254.192859] state_store+0x7b/0xe0 <4>[ 254.192879] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.192899] new_sync_write+0x11d/0x1b0 <4>[ 254.192916] vfs_write+0x265/0x390 <4>[ 254.192933] ksys_write+0x5a/0xd0 <4>[ 254.192949] do_syscall_64+0x33/0x80 <4>[ 254.192965] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.192986] irq event stamp: 43775 <4>[ 254.192994] hardirqs last enabled at (43775): [<ffffffff81c00c42>] asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193023] hardirqs last disabled at (43774): [<ffffffff81aa691a>] sysvec_apic_timer_interrupt+0xa/0xb0 <4>[ 254.193049] softirqs last enabled at (42548): [<ffffffff81e00342>] __do_softirq+0x342/0x48e <4>[ 254.193074] softirqs last disabled at (42543): [<ffffffff810b45fd>] irq_exit_rcu+0xad/0xd0 <4>[ 254.193101] other info that might help us debug this: <4>[ 254.193107] Possible unsafe locking scenario: <4>[ 254.193112] CPU0 <4>[ 254.193117] ---- <4>[ 254.193121] lock(rtc_lock); <4>[ 254.193137] <Interrupt> <4>[ 254.193142] lock(rtc_lock); <4>[ 254.193156] *** DEADLOCK *** <4>[ 254.193161] 6 locks held by rtcwake/5309: <4>[ 254.193174] #0: ffff888104861430 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x5a/0xd0 <4>[ 254.193232] #1: ffff88810f823288 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xe7/0x1c0 <4>[ 254.193282] #2: ffff888100cef3c0 (kn->active#285 <7>[ 254.192706] i915 0000:00:02.0: [drm:intel_modeset_setup_hw_state [i915]] [CRTC:51:pipe A] hw state readout: disabled <4>[ 254.193307] ){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xf0/0x1c0 <4>[ 254.193333] #3: ffffffff82649fa8 (system_transition_mutex){+.+.}-{3:3}, at: pm_suspend.cold.8+0xce/0x34a <4>[ 254.193387] #4: ffffffff827a2108 (acpi_scan_lock){+.+.}-{3:3}, at: acpi_suspend_begin+0x47/0x70 <4>[ 254.193433] #5: ffff8881019ea178 (&dev->mutex){....}-{3:3}, at: device_resume+0x68/0x1e0 <4>[ 254.193485] stack backtrace: <4>[ 254.193492] CPU: 1 PID: 5309 Comm: rtcwake Not tainted 5.12.0-rc1-CI-CI_DRM_9834+ #1 <4>[ 254.193514] Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 <4>[ 254.193524] Call Trace: <4>[ 254.193536] dump_stack+0x7f/0xad <4>[ 254.193567] mark_lock.part.47+0x8ca/0xce0 <4>[ 254.193604] __lock_acquire+0x39b/0x2590 <4>[ 254.193626] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 <4>[ 254.193660] lock_acquire+0xd1/0x3d0 <4>[ 254.193677] ? cmos_interrupt+0x18/0x100 <4>[ 254.193716] _raw_spin_lock+0x2a/0x40 <4>[ 254.193735] ? cmos_interrupt+0x18/0x100 <4>[ 254.193758] cmos_interrupt+0x18/0x100 <4>[ 254.193785] cmos_resume+0x2ac/0x2d0 <4>[ 254.193813] ? acpi_pm_set_device_wakeup+0x1f/0x110 <4>[ 254.193842] ? pnp_bus_suspend+0x10/0x10 <4>[ 254.193864] pnp_bus_resume+0x5e/0x90 <4>[ 254.193885] dpm_run_callback+0x5f/0x240 <4>[ 254.193914] device_resume+0xb2/0x1e0 <4>[ 254.193942] ? pm_dev_err+0x25/0x25 <4>[ 254.193974] dpm_resume+0xea/0x3f0 <4>[ 254.194005] dpm_resume_end+0x8/0x10 <4>[ 254.194030] suspend_devices_and_enter+0x29b/0xaa0 <4>[ 254.194066] pm_suspend.cold.8+0x301/0x34a <4>[ 254.194094] state_store+0x7b/0xe0 <4>[ 254.194124] kernfs_fop_write_iter+0x11d/0x1c0 <4>[ 254.194151] new_sync_write+0x11d/0x1b0 <4>[ 254.194183] vfs_write+0x265/0x390 <4>[ 254.194207] ksys_write+0x5a/0xd0 <4>[ 254.194232] do_syscall_64+0x33/0x80 <4>[ 254.194251] entry_SYSCALL_64_after_hwframe+0x44/0xae <4>[ 254.194274] RIP: 0033:0x7f07d79691e7 <4>[ 254.194293] Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 <4>[ 254.194312] RSP: 002b:00007ffd9cc2c768 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4>[ 254.194337] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f07d79691e7 <4>[ 254.194352] RDX: 0000000000000004 RSI: 0000556ebfc63590 RDI: 000000000000000b <4>[ 254.194366] RBP: 0000556ebfc63590 R08: 0000000000000000 R09: 0000000000000004 <4>[ 254.194379] R10: 0000556ebf0ec2a6 R11: 0000000000000246 R12: 0000000000000004 which breaks S3-resume on fi-kbl-soraka presumably as that's slow enough to trigger the alarm during the suspend. Fixes: 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") References: 66e4f4a9cc38 ("rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()"): Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Xiaofei Tan <tanxiaofei@huawei.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210305122140.28774-1-chris@chris-wilson.co.uk
2021-09-09rtc: rx8010: select REGMAP_I2CYu-Tung Chang
The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com
2021-08-17rtc: rx8025: implement RX-8035 supportMathew McBride
The RX-8035 is a newer RTC from EPSON that is very similar to the RX-8025. The key difference is in the oscillation stop (XSTP) bit which is inverted on the RX-8035. Signed-off-by: Mathew McBride <matt@traverse.com.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210709044518.28769-2-matt@traverse.com.au
2021-08-17rtc: cmos: remove stale REVISIT commentsMateusz Jończyk
It appears mc146818_get_time() and mc146818_set_time() now correctly use the century register as specified in the ACPI FADT table. It is not clear what else could be done here. These comments were introduced by commit 7be2c7c96aff ("[PATCH] RTC framework driver for CMOS RTCs") in 2007, which originally referenced function get_rtc_time() in include/asm-generic/rtc.h . Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210716210437.29622-1-mat.jonczyk@o2.pl
2021-08-17rtc: tps65910: Correct driver module aliasDmitry Osipenko
The TPS65910 RTC driver module doesn't auto-load because of the wrong module alias that doesn't match the device name, fix it. Cc: stable@vger.kernel.org Reported-by: Anton Bambura <jenneron@protonmail.com> Tested-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210808160030.8556-1-digetx@gmail.com
2021-08-10rtc: move RTC_LIB_KUNIT_TEST to proper locationAlexandre Belloni
Move RTC_LIB_KUNIT_TEST under RTC_LIB so it is clear in the menu this is part of the RTC subsystem. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210810212008.631359-2-alexandre.belloni@bootlin.com
2021-08-10rtc: lib_test: add MODULE_LICENSEAlexandre Belloni
As the documentation states, "The exact license information can only be determined via the license information in the corresponding source files." and the SPDX identifier has the proper information. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210810212008.631359-1-alexandre.belloni@bootlin.com
2021-08-10rtc: Improve performance of rtc_time64_to_tm(). Add tests.Cassio Neri
The current implementation of rtc_time64_to_tm() contains unnecessary loops, branches and look-up tables. The new one uses an arithmetic-based algorithm appeared in [1] and is approximately 4.3 times faster (YMMV). The drawback is that the new code isn't intuitive and contains many 'magic numbers' (not unusual for this type of algorithm). However, [1] justifies all those numbers and, given this function's history, the code is unlikely to need much maintenance, if any at all. Add a KUnit test case that checks every day in a 160,000 years interval starting on 1970-01-01 against the expected result. Add a new config RTC_LIB_KUNIT_TEST symbol to give the option to run this test suite. [1] Neri, Schneider, "Euclidean Affine Functions and Applications to Calendar Algorithms". https://arxiv.org/abs/2102.06959 Signed-off-by: Cassio Neri <cassio.neri@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210624201343.85441-1-cassio.neri@gmail.com
2021-08-06rtc: s5m: set rangeAlexandre Belloni
The S5M8763X type seems to handles dates from year 0000 to 9999, there is no info on leap year handling after 2099. The other models handles dates from 2000 to 2099. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210804104133.5158-4-alexandre.belloni@bootlin.com
2021-08-06rtc: s5m: enable wakeup only when availableAlexandre Belloni
Call device_init_wakeup() only when alarms are available and the RTC is actually able to wake up the system. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210804104133.5158-3-alexandre.belloni@bootlin.com
2021-08-06rtc: s5m: signal the core when alarm are not availableAlexandre Belloni
Clear the RTC_FEATURE_ALARM bit to signal to the core when alarms are not available to ensure the alarm callbacks are never called and userspace is aware alarms are not supported. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210804104133.5158-2-alexandre.belloni@bootlin.com
2021-08-06rtc: s5m: switch to devm_rtc_allocate_deviceAlexandre Belloni
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210804104133.5158-1-alexandre.belloni@bootlin.com
2021-07-10Merge tag 'rtc-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Mostly documentation/comment changes and non urgent fixes. - add or fix SPDX identifiers - NXP pcf*: fix datasheet URLs - imxdi: add wakeup support - pcf2127: handle timestamp interrupts, this fixes a possible interrupt storm - bd70528: Drop BD70528 support" * tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: pcf8523: rename register and bit defines rtc: pcf2127: handle timestamp interrupts rtc: at91sam9: Remove unnecessary offset variable checks rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt() rtc: spear: convert to SPDX identifier rtc: tps6586x: convert to SPDX identifier rtc: tps80031: convert to SPDX identifier rtc: rtd119x: Fix format of SPDX identifier rtc: sc27xx: Fix format of SPDX identifier rtc: palmas: convert to SPDX identifier rtc: max6900: convert to SPDX identifier rtc: ds1374: convert to SPDX identifier rtc: au1xxx: convert to SPDX identifier rtc: pcf85063: Update the PCF85063A datasheet revision dt-bindings: rtc: ti,bq32k: take maintainership rtc: pcf8563: Fix the datasheet URL rtc: pcf85063: Fix the datasheet URL rtc: pcf2127: Fix the datasheet URL dt-bindings: rtc: ti,bq32k: Convert to json-schema dt-bindings: rtc: rx8900: Convert to YAML schema ...
2021-07-10rtc: pcf8523: rename register and bit definesAlexandre Belloni
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly and defines REG_OFFSET. Rename the register and bit definition to something specific to the driver. Fixes: 7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
2021-07-10rtc: pcf2127: handle timestamp interruptsMian Yousaf Kaukab
commit 03623b4b041c ("rtc: pcf2127: add tamper detection support") added support for timestamp interrupts. However they are not being handled in the irq handler. If a timestamp interrupt occurs it results in kernel disabling the interrupt and displaying the call trace: [ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option) ... [ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127] [ 121.248971] Disabling IRQ #78 Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp before clearing TSF1 and TSF2 flags so that it can't be overwritten. Set a flag to mark if the timestamp is valid and only report to sysfs if the flag is set. To mimic the hardware behavior, don’t save another timestamp until the first one has been read by the userspace. However, if the alarm irq is not configured, keep the old way of handling timestamp interrupt in the timestamp0 sysfs calls. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
2021-07-10rtc: at91sam9: Remove unnecessary offset variable checksNobuhiro Iwamatsu
The offset variable is checked by at91_rtc_readalarm(), but this check is unnecessary because the previous check knew that the value of this variable was not 0. This removes that unnecessary offset variable checks. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()Nobuhiro Iwamatsu
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return value, but doesn't use it. This modifies using the s5m_check_peding_alarm_interrupt()"s return value as the s5m_rtc_read_alarm()'s return value. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: spear: convert to SPDX identifierNobuhiro Iwamatsu
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: tps6586x: convert to SPDX identifierNobuhiro Iwamatsu
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: tps80031: convert to SPDX identifierNobuhiro Iwamatsu
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: rtd119x: Fix format of SPDX identifierNobuhiro Iwamatsu
For C files, use the C99 format (//). Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: sc27xx: Fix format of SPDX identifierNobuhiro Iwamatsu
For C files, use the C99 format (//). Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp
generated by cgit (git 2.34.1) at 2025-07-19 01:50:40 +0000