| Age | Commit message (Collapse) | Author |
|---|
|
Two fields got removed but are still documented:
drivers/spi/spi-ep93xx.c:98: warning: Excess struct member 'dma_rx_data' description in 'ep93xx_spi'
drivers/spi/spi-ep93xx.c:98: warning: Excess struct member 'dma_tx_data' description in 'ep93xx_spi'
Fixes: 3cfe73256905 ("spi: ep93xx: add DT support for Cirrus EP93xx")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
- add OF ID match table
- add device tree DMA request, so we can probe defer, in case DMA is not
ready yet
- drop DMA platform code
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Tested-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use devm_pm_runtime_enable(), devm_request_irq() and
devm_spi_register_controller() to simplify code.
And also register a callback spi_geni_release_dma_chan() with
devm_add_action_or_reset(), to release dma channel in both error
and device detach path, which can make sure the release sequence is
consistent with the original one.
1. Unregister spi controller.
2. Free the IRQ.
3. Free DMA chans
4. Disable runtime PM.
So the remove function can also be removed.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240912091701.3720857-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A patch for Qualcomm depends on some fixes.
|
|
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
spi_controller_is_slave() and spi_slave_abort() are all replaced,
so they can be removed.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-8-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name target_abort.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-6-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-5-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-4-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_target_abort().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-3-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch to use modern name function spi_controller_is_target().
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-2-yangyingliang@huaweicloud.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484ec ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85ec ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flexspi on imx8ulp only has 16 LUTs, different with others which
have up to 32 LUTs.
Add a separate compatible string and nxp_fspi_devtype_data to support
flexspi on imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-4-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.
Fixes: 783bf5d09f86 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused annotations from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240902184655.932699-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the of_device_id entry for "elgin,jg10309-01" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for elgin,jg10309-01
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: 5f3eee1eef5d0edd ("spi: spidev: Add an entry for elgin,jg10309-01")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 8a0ec8c2d736 ("spi: Insert the missing pci_dev_put()before
return") added two uses of pci_dev_put() with an uninitialized dma_dev,
resulting in the following compiler warnings (or errors with
CONFIG_WERROR) when building with clang:
drivers/spi/spi-pxa2xx-pci.c:150:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
150 | pci_dev_put(dma_dev);
| ^~~~~~~
drivers/spi/spi-pxa2xx-pci.c:228:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
228 | pci_dev_put(dma_dev);
| ^~~~~~~
Commit 609d7ffdc421 ("spi: pxa2xx-pci: Balance reference count for PCI
DMA device") added a call to pci_dev_put() via
devm_add_action_or_reset() in case of failures, so the recent change was
incorrect for multiple reasons. Revert it altogether.
Fixes: 8a0ec8c2d736 ("spi: Insert the missing pci_dev_put()before return")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/CAMuHMdWNjo69_W6f+R9QJJOf8uF0htg2XazeS-yjugJv3UM+kg@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240902-spi-revert-8a0ec8c2d736-v1-1-928b829fed2b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In zynq_qspi_exec_mem_op(), the temporary buffer is allocated with
kzalloc and then immediately initialized using memset to 0xff. To
optimize this, replace kzalloc with kmalloc, as the zeroing operation
is redundant and unnecessary.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240814192839.345523-1-visitorckw@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902103203.2476576-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit had been applied twice as
0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
and
f1011ba20b83 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
This reverts commit f1011ba20b83da3ee70dcb4a6d9d282a718916fa.
Fixes: f1011ba20b83 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902102853.2476165-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use devm_spi_alloc_host() so that there's no need to call
spi_controller_put() in the error path.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The header file linux/platform_device.h is included
twice. Remove the last one.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240830075800.3541646-1-lihongbo22@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked.
Fixes: e58db3bcd93b ("spi: intel: Add default partition and name to the second chip")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20240830074106.8744-1-hanchunchao@inspur.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix uninitialized res in probe function.
|
|
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix missing pm_runtime_disable().
|
|
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix uninitialized res in probe function.
|
|
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240828180057.3167190-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the original file is guaranteed to contain the minmax.h header file
and compile correctly, using the real macro is usually
more intuitive and readable.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240827131203.3918516-1-yanzhen@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.
Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240829113158.3324928-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Increase the reference count by calling pci_get_slot(), and remember to
decrement the reference count by calling pci_dev_put().
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Link: https://patch.msgid.link/20240829033511.1917015-1-11162571@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240826132544.3463616-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The second platform_get_resource_byname() can not be replaced with
devm_platform_ioremap_resource_byname(), because the intermediate "res"
is used by resource_size() later.
Fixes: 3bf2a5359b0b ("spi: wpcm-fiu: Use devm_platform_ioremap_resource_byname()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240826132544.3463616-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240826125913.3434305-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The second platform_get_resource_byname() can not be replaced with
devm_platform_ioremap_resource_byname(), because the intermediate "res"
is used to assign for "aq->mmap_size".
Fixes: 3ccea1dedef3 ("spi: atmel-quadspi: Simpify resource lookup")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://patch.msgid.link/20240826125913.3434305-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use devm_spi_alloc_host() so that there's no need to call
spi_controller_put() in the error path.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20240826124903.3429235-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pm_runtime_disable() is missing in remove function, use
devm_pm_runtime_enable() to fix it. So the pm_runtime_disable() in
the probe error path can also be removed.
Fixes: a38a2233f23b ("spi: bcmbca-hsspi: Add driver for newer HSSPI controller")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20240826124903.3429235-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e882575efc77 ("spi: rockchip: Suspend and resume the bus during
NOIRQ_SYSTEM_SLEEP_PM ops") stopped respecting runtime PM status and
simply disabled clocks unconditionally when suspending the system. This
causes problems when the device is already runtime suspended when we go
to sleep -- in which case we double-disable clocks and produce a
WARNing.
Switch back to pm_runtime_force_{suspend,resume}(), because that still
seems like the right thing to do, and the aforementioned commit makes no
explanation why it stopped using it.
Also, refactor some of the resume() error handling, because it's not
actually a good idea to re-disable clocks on failure.
Fixes: e882575efc77 ("spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops")
Cc: stable@vger.kernel.org
Reported-by: Ondřej Jirman <megi@xff.cz>
Closes: https://lore.kernel.org/lkml/20220621154218.sau54jeij4bunf56@core/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20240827171126.1115748-1-briannorris@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The timeout used when waiting for transfer's completion is always set to
HZ. This isn't enough if a transfer is too large or if the bus speed is
too low.
Use the bus speed and the transfer length to calculate an appropriate
timeout
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20240828063131.10507-1-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of calling platform_get_resource_byname() and
devm_ioremap_resource(), simplify the code by simply calling
devm_platform_ioremap_resource_byname().
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820124011.1788479-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820123818.1788432-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820123518.1788294-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCI and platform buses have different defaults for runtime PM.
In particular PCI probe is assumed to be called when PM runtime
is enabled by the PCI core. In this case if we try enable it again
the PM runtime complaints with
pxa2xx_spi_pci 0000:00:07.0: Unbalanced pm_runtime_enable!
Fix this by moving PM runtime handling from the SPI PXA2xx core
to the glue drivers.
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The platform_data field may be supplied by legacy board code.
In other cases we override it, and module remove and probe cycle
will crash the kernel since it will carry a stale pointer.
Fix this by supplying a third argument to the pxa2xx_spi_probe()
and avoid overriding dev->platform_data.
Reported-by: Hao Ma <hao.ma@intel.com>
Fixes: cc160697a576 ("spi: pxa2xx: Convert PCI driver to use spi-pxa2xx code directly")
Fixes: 3d8f037fbcab ("spi: pxa2xx: Move platform driver to a separate file")
Fixes: 20ade9b9771c ("spi: pxa2xx: Extract pxa2xx_spi_platform_*() callbacks")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240822113408.750831-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Referring to the errata ERR051608 of I.MX93, LPSPI TCR[PRESCALE]
can only be configured to be 0 or 1, other values are not valid
and will cause LPSPI to not work.
Add the prescale limitation for LPSPI in I.MX93. Other platforms
are not affected.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20240820070658.672127-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:
Fix module autoloading and missing pm_runtime_disable().
|
|
The pm_runtime_disable() is missing in the remove function, fix it
by using devm_pm_runtime_enable(), so the pm_runtime_disable() in
the probe error path can also be removed.
Fixes: 2d13f2ff6073 ("spi: bcm63xx-spi: fix pm_runtime")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://patch.msgid.link/20240819123349.4020472-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
