summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2024-01-27tty: vt: make consw::con_switch() return a boolJiri Slaby (SUSE)
The non-zero (true) return value from consw::con_switch() means a redraw is needed. So make this return type a bool explicitly instead of int. The latter might imply that -Eerrors are expected. They are not. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-parisc@vger.kernel.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-31-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: remove CM_* constantsJiri Slaby (SUSE)
There is no difference between CM_MOVE and CM_DRAW. Either of them enables the cursor. CM_ERASE then disables cursor. So get rid of all of them and use simple "bool enable". Note that this propagates down to the fbcon code. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-parisc@vger.kernel.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: add con_putc() helperJiri Slaby (SUSE)
And let it call consw::con_putc() if it exists, otherwise consw::con_putcs(). This is similar to tty_put_char(). It supports dropping unneeded duplication of code like sticon_putc() is (see the next patch). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-24-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: sanitize arguments of consw::con_clear()Jiri Slaby (SUSE)
In consw::con_clear(): * Height is always 1, so drop it. * Offsets and width are always unsigned values, so re-type them as such. This needs a new __fbcon_clear() in the fbcon code to still handle height which might not be 1 when called internally. Note that tests for negative count/width are left in place -- they are taken care of in the next patches. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-parisc@vger.kernel.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-22-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: make init parameter of consw::con_init() a boolJiri Slaby (SUSE)
The 'init' parameter of consw::con_init() is true for the first call of the hook on a particular console. So make the parameter a bool. And document the hook. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-parisc@vger.kernel.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-21-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: make consw::con_debug_*() return voidJiri Slaby (SUSE)
The return value of con_debug_enter() and con_debug_leave() is ignored on many fronts. So just don't propagate errors (the current implementations return 0 anyway) and make the return type a void. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-20-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: define an enum for ascii charactersJiri Slaby (SUSE)
I didn't find definitions for ascii in the kernel yet, so define it for non-printable characters used here. Note we use ' ' instead of 32 on one line too. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-18-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: reflow csi_K()Jiri Slaby (SUSE)
Push cases one level left, according to coding style. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-17-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: define an enum for CSI+K codesJiri Slaby (SUSE)
Decrypt the constant values by proper enum names. This time in csi_K(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-16-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27don't pass vc->vc_par[0] to csi_?() handlersJiri Slaby (SUSE)
Fetch the value directly in the helpers instead. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-15-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27use clamp() for counts in csi_?() handlersJiri Slaby (SUSE)
The count to process is supposed to be between 1 and vc->vc_cols - vc->state.x (or rows and .y). clamp() can be used exactly for this, instead of ifs and min(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-14-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: reflow csi_J()Jiri Slaby (SUSE)
Push cases one level left, according to coding style. And reorder local variables. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-13-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: define an enum for CSI+J codesJiri Slaby (SUSE)
Decrypt the constant values by proper enum names. This time in csi_J(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-12-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: use case ranges for CSI+m fg/bg colorsJiri Slaby (SUSE)
Replacing the default case with the iffery by case ranges makes the code more understandable at last. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-11-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: define an enum for CSI+m codesJiri Slaby (SUSE)
It's always confusing to read all those case 0:, case 1: etc. in csi_* handlers. Define enum entries for all those constants in CSI+m and use them in csi_m(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-10-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: make vc_is_sel()'s vc constJiri Slaby (SUSE)
It's only an aid to people reading the header and/or calling vc_is_sel(). vc is only tested there, so having it const makes sense. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-9-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: pass vc_resize_user as a parameterJiri Slaby (SUSE)
It is pretty unfortunate to set vc_data::vc_resize_user in two callers of vc_do_resize(). vc_resize_user is immediately reset there (while remembering it). So instead of this back and forth, pass 'from_user' as a parameter. Notes on 'int user': * The name changes from 'user' to 'from_user' on some places to be consistent. * The type is bool now as 'int user' might evoke user's uid or whatever. Provided vc_resize() is called on many places and they need not to care about this parameter, its prototype is kept unchanged. Instead, it is now an inline calling a new __vc_resize() which implements the above. This patch makes the situation much more obvious. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-8-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: push console lock from tioclinux() down to 2 functionsJiri Slaby (SUSE)
Avoid costly user copies under the console lock. So push the lock down from tioclinux() to sel_loadlut() and set_vesa_blanking(). It is now obvious what is actually protected. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-7-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: pass proper pointers from tioclinux()Jiri Slaby (SUSE)
Pass proper types and proper pointers (the data with an offset) to the TIOCL_* handlers. So that they need not to cast or add anything to the passed pointer. This makes obvious what is passed/consumed. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-6-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: expect valid vc when in tty opsJiri Slaby (SUSE)
At least since commits feebed6515a1 ("tty: shutdown method") and bc1e99d93f09 ("TTY: vt, add ->install"), tty->driver_data in vc is expected to be set since tty_operations::install() till ::cleanup(). So the checks of !tty->driver_data (aka !vc) in: * vc_do_resize() by tty -> ioctl(TIOCSWINSZ) -> vt_resize() * do_con_write() by tty -> tty_operations::write()/::put_char() * con_flush_chars() by tty -> ::flush_chars() are all superfluous. And also, holding a console lock is not needed to fetch tty->driver_data. Note there is even a stale comment in con_flush_chars() about a race between that and con_close(). But con_close() does not set tty->driver_data to NULL for years already. Drop all these in a hope I am not terribly mistaken. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27tty: vt: fix 20 vs 0x20 typo in EScsiignoreJiri Slaby (SUSE)
The if (c >= 20 && c <= 0x3f) test added in commit 7a99565f8732 is wrong. 20 is DC4 in ascii and it makes no sense to consider that as the bottom limit. Instead, it should be 0x20 as in the other test in the commit above. This is supposed to NOT change anything as we handle interesting 20-0x20 asciis far before this if. So for sakeness, change to 0x20 (which is SPACE). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Fixes: 7a99565f8732 ("vt: ignore csi sequences with intermediate characters.") Cc: Martin Hostettler <textshell@uchuujin.de> Link: https://lore.kernel.org/all/ZaP45QY2WEsDqoxg@neutronstar.dyndns.org/ Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-4-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-27vgacon: inline vc_scrolldelta_helper() into vgacon_scrolldelta()Jiri Slaby (SUSE)
Since commit 74d58cd48a8f ("USB: sisusbvga: remove console support"), vgacon_scrolldelta() is the only user of vc_scrolldelta_helper(). Inline the helper into vgacon_scrolldelta() and drop it. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Tested-by: Helge Deller <deller@gmx.de> # parisc STI console Link: https://lore.kernel.org/r/20240122110401.7289-2-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-20Merge tag 'riscv-for-linus-6.8-mw4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - Support for tuning for systems with fast misaligned accesses. - Support for SBI-based suspend. - Support for the new SBI debug console extension. - The T-Head CMOs now use PA-based flushes. - Support for enabling the V extension in kernel code. - Optimized IP checksum routines. - Various ftrace improvements. - Support for archrandom, which depends on the Zkr extension. - The build is no longer broken under NET=n, KUNIT=y for ports that don't define their own ipv6 checksum. * tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits) lib: checksum: Fix build with CONFIG_NET=n riscv: lib: Check if output in asm goto supported riscv: Fix build error on rv32 + XIP riscv: optimize ELF relocation function in riscv RISC-V: Implement archrandom when Zkr is available riscv: Optimize hweight API with Zbb extension riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI] riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support riscv: ftrace: Make function graph use ftrace directly riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name riscv: Restrict DWARF5 when building with LLVM to known working versions riscv: Hoist linker relaxation disabling logic into Kconfig kunit: Add tests for csum_ipv6_magic and ip_fast_csum riscv: Add checksum library riscv: Add checksum header riscv: Add static key for misaligned accesses asm-generic: Improve csum_fold RISC-V: selftests: cbo: Ensure asm operands match constraints ...
2024-01-18Merge tag 'usb-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.8-rc1. Included in here are the following: - Thunderbolt subsystem and driver updates for USB 4 hardware and issues reported by real devices - xhci driver updates - dwc3 driver updates - uvc_video gadget driver updates - typec driver updates - gadget string functions cleaned up - other small changes All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: typec: tipd: fix use of device-specific init function usb: typec: tipd: Separate reset for TPS6598x usb: mon: Fix atomicity violation in mon_bin_vma_fault usb: gadget: uvc: Remove nested locking usb: gadget: uvc: Fix use are free during STREAMOFF usb: typec: class: fix typec_altmode_put_partner to put plugs dt-bindings: usb: dwc3: Limit num-hc-interrupters definition dt-bindings: usb: xhci: Add num-hc-interrupters definition xhci: add support to allocate several interrupters USB: core: Use device_driver directly in struct usb_driver and usb_device_driver arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue arm64: dts: qcom: msm8996: Remove PNoC clock from MSS arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8939: Drop RPM bus clocks arm64: dts: qcom: sdm630: Drop RPM bus clocks arm64: dts: qcom: qcs404: Drop RPM bus clocks arm64: dts: qcom: msm8996: Drop RPM bus clocks ...
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-17Merge tag 'leds-next-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Allwinner A100 RGB LED controller - Add support for Maxim 5970 Dual Hot-swap controller New Device Support: - Add support for AW20108 to Awinic LED driver New Functionality: - Extend support for Net speeds to include; 2.5G, 5G and 10G - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off via sysfs if required - Add support for hardware control in AW200xx Fix-ups: - Use safer methods for string handling - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Replace Mutex use with the Completion mechanism - Fix include lists; alphabetise, remove unused, explicitly add used - Use generic platform device properties - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Continue work to remove superfluous platform .remove() call-backs - Remove superfluous/defunct code - Trivial; whitespace, unused variables, spelling, clean-ups, etc - Avoid unnecessary duplicate locks Bug Fixes: - Repair Kconfig based dependency lists - Ensure unused dynamically allocated data is freed after use - Fix support for brightness control - Add missing sufficient delays during reset to ensure correct operation - Avoid division-by-zero issues" * tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits) leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control leds: trigger: panic: Don't register panic notifier if creating the trigger failed leds: sun50i-a100: Convert to be agnostic to property provider leds: max5970: Add missing headers leds: max5970: Make use of dev_err_probe() leds: max5970: Make use of device properties leds: max5970: Remove unused variable leds: rgb: Drop obsolete dependency on COMPILE_TEST leds: sun50i-a100: Avoid division-by-zero warning leds: trigger: Remove unused function led_trigger_rename_static() leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails dt-bindings: leds: qcom,spmi-flash-led: Fix example node name dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints dt-bindings: leds: awinic,aw200xx: Add AW20108 device leds: aw200xx: Add support for aw20108 device leds: aw200xx: Improve autodim calculation method leds: aw200xx: Enable disable_locking flag in regmap config leds: aw200xx: Add delay after software reset dt-bindings: leds: aw200xx: Remove property "awinic,display-rows" ...
2024-01-11Merge tag 'soc-drivers-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "A new drivers/cache/ subsystem is added to contain drivers for abstracting cache flush methods on riscv and potentially others, as this is needed for handling non-coherent DMA but several SoCs require nonstandard hardware methods for it. op-tee gains support for asynchronous notification with FF-A, as well as support for a system thread for executing in secure world. The tee, reset, bus, memory and scmi subsystems have a couple of minor updates. Platform specific soc driver changes include: - Samsung Exynos gains driver support for Google GS101 (Tensor G1) across multiple subsystems - Qualcomm Snapdragon gains support for SM8650 and X1E along with added features for some other SoCs - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195, and driver support for MT8188 along with some code refactoring. - Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream - Apple M1 mailbox driver is rewritten into a SoC driver - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon" * tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) memory: ti-emif-pm: Convert to platform remove callback returning void memory: ti-aemif: Convert to platform remove callback returning void memory: tegra210-emc: Convert to platform remove callback returning void memory: tegra186-emc: Convert to platform remove callback returning void memory: stm32-fmc2-ebi: Convert to platform remove callback returning void memory: exynos5422-dmc: Convert to platform remove callback returning void memory: renesas-rpc-if: Convert to platform remove callback returning void memory: omap-gpmc: Convert to platform remove callback returning void memory: mtk-smi: Convert to platform remove callback returning void memory: jz4780-nemc: Convert to platform remove callback returning void memory: fsl_ifc: Convert to platform remove callback returning void memory: fsl-corenet-cf: Convert to platform remove callback returning void memory: emif: Convert to platform remove callback returning void memory: brcmstb_memc: Convert to platform remove callback returning void memory: brcmstb_dpfe: Convert to platform remove callback returning void soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset firmware: qcom: qseecom: fix memory leaks in error paths dt-bindings: clock: google,gs101: rename CMU_TOP gate defines soc: qcom: llcc: Fix typo in kernel-doc dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel ...
2024-01-10tty: Add SBI debug console support to HVC SBI driverAtish Patra
RISC-V SBI specification supports advanced debug console support via SBI DBCN extension. Extend the HVC SBI driver to support it. Signed-off-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231124070905.1043092-5-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-10tty/serial: Add RISC-V SBI debug console based earlyconAnup Patel
We extend the existing RISC-V SBI earlycon support to use the new RISC-V SBI debug console extension. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20231124070905.1043092-4-apatel@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-01-04serial: sc16is7xx: refactor EFR lockHugo Villeneuve
Move common code for EFR lock/unlock of mutex into functions for code reuse and clarity. With the addition of old_lcr, move irda_mode within struct sc16is7xx_one to reduce memory usage: Before: /* size: 752, cachelines: 12, members: 10 */ After: /* size: 744, cachelines: 12, members: 10 */ Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-17-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: reorder code to remove prototype declarationsHugo Villeneuve
Move/reorder some functions to remove sc16is7xx_ier_set() and sc16is7xx_stop_tx() prototypes declarations. No functional change. sc16is7xx_ier_set() was introduced in commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop"). Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-16-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: refactor FIFO access functions to increase commonalityHugo Villeneuve
Simplify FIFO access functions by avoiding to declare a struct sc16is7xx_port *s variable within each function. This is mainly done to have more commonality between the max310x and sc16is7xx drivers. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-15-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: drop unneeded MODULE_ALIASHugo Villeneuve
The MODULE_DEVICE_TABLE() already creates the proper aliases for the SPI driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-14-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: replace hardcoded divisor value with BIT() macroHugo Villeneuve
To better show why the limit is what it is, since we have only 16 bits for the divisor. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-13-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add explicit return for some switch default casesHugo Villeneuve
Allows to simplify code by removing the break statement in the default switch/case in some functions. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-12-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add macro for max number of UART portsHugo Villeneuve
Add macro to hold the maximum number of UART ports per IC/device. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-11-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add driver name to struct uart_driverHugo Villeneuve
Make sure that the driver name is displayed instead of "unknown" when displaying the driver infos: Before: grep ttySC /proc/tty/drivers unknown /dev/ttySC 243 0-7 serial After: grep ttySC /proc/tty/drivers sc16is7xx /dev/ttySC 243 0-7 serial Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-10-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use i2c_get_match_data()Hugo Villeneuve
Use preferred i2c_get_match_data() instead of device_get_match_data() and i2c_client_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-9-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use spi_get_device_match_data()Hugo Villeneuve
Use preferred spi_get_device_match_data() instead of device_get_match_data() and spi_get_device_id() to get the driver match data. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-8-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfieldHugo Villeneuve
Replace the explicit sc16is7xx_lines bitfield declaration with the generic macro DECLARE_BITMAP() to reserve just enough memory to contain all required bits. This also improves code self-documentation by showing the maximum number of bits required. This conversion now makes sc16is7xx_lines an array, so drop the "&" before sc16is7xx_lines in all bit access functions. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-7-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: improve do/while loop in sc16is7xx_irq()Hugo Villeneuve
Simplify and improve readability by replacing while(1) loop with do {} while, and by using the keep_polling variable as the exit condition, making it more explicit. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq()Hugo Villeneuve
Commit 834449872105 ("sc16is7xx: Fix for multi-channel stall") changed sc16is7xx_port_irq() from looping multiple times when there was still interrupts to serve. It simply changed the do {} while(1) loop to a do {} while(0) loop, which makes the loop itself now obsolete. Clean the code by removing this obsolete do {} while(0) loop. Fixes: 834449872105 ("sc16is7xx: Fix for multi-channel stall") Cc: <stable@vger.kernel.org> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: set safe default SPI clock frequencyHugo Villeneuve
15 MHz is supported only by 76x variants. If the SPI clock frequency is not specified, use a safe default clock value of 4 MHz that is supported by all variants. Also use HZ_PER_MHZ macro to improve readability. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: add check for unsupported SPI modes during probeHugo Villeneuve
The original comment is confusing because it implies that variants other than the SC16IS762 supports other SPI modes beside SPI_MODE_0. Extract from datasheet: The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to 15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752... In all other aspects, the SC16IS762 is functionally and electrically the same as the SC16IS752. The same is also true of the SC16IS760 variant versus the SC16IS740 and SC16IS750 variants. For all variants, only SPI mode 0 is supported. Change comment and abort probing if the specified SPI mode is not SPI_MODE_0. Fixes: 2c837a8a8f9f ("sc16is7xx: spi interface is added") Cc: <stable@vger.kernel.org> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe errorHugo Villeneuve
If an error occurs during probing, the sc16is7xx_lines bitfield may be left in a state that doesn't represent the correct state of lines allocation. For example, in a system with two SC16 devices, if an error occurs only during probing of channel (port) B of the second device, sc16is7xx_lines final state will be 00001011b instead of the expected 00000011b. This is caused in part because of the "i--" in the for/loop located in the out_ports: error path. Fix this by checking the return value of uart_add_one_port() and set line allocation bit only if this was successful. This allows the refactor of the obfuscated for(i--...) loop in the error path, and properly call uart_remove_one_port() only when needed, and properly unset line allocation bits. Also use same mechanism in remove() when calling uart_remove_one_port(). Fixes: c64349722d14 ("sc16is7xx: support multiple devices") Cc: <stable@vger.kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20231221231823.2327894-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: 8250_exar: Set missing rs485_supported flagLino Sanfilippo
The UART supports an auto-RTS mode in which the RTS pin is automatically activated during transmission. So mark this mode as being supported even if RTS is not controlled by the driver but the UART. Also the serial core expects now at least one of both modes rts-on-send or rts-after-send to be supported. This is since during sanitization unsupported flags are deleted from a RS485 configuration set by userspace. However if the configuration ends up with both flags unset, the core prints a warning since it considers such a configuration invalid (see uart_sanitize_serial_rs485()). Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: omap: do not override settings for RS485 supportLino Sanfilippo
The drivers RS485 support is deactivated if there is no RTS GPIO available. This is done by nullifying the ports rs485_supported struct. After that however the settings in serial_omap_rs485_supported are assigned to the same structure unconditionally, which results in an unintended reactivation of RS485 support. Fix this by moving the assignment to the beginning of serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets called. Also replace the assignment of rs485_config() to have the complete RS485 setup in one function. Fixes: e2752ae3cfc9 ("serial: omap: Disallow RS-485 if rts-gpio is not specified") Cc: <stable@vger.kernel.org> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core, imx: do not set RS485 enabled if it is not supportedLino Sanfilippo
If the imx driver cannot support RS485 it nullifies the ports rs485_supported structure. But it still calls uart_get_rs485_mode() which may set the RS485_ENABLED flag nevertheless. This may lead to an attempt to configure RS485 even if it is not supported when the flag is evaluated in uart_configure_port() at port startup. Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED flag is not supported by the caller. With this fix a check for RTS availability is now obsolete in the imx driver, since it can not evaluate to true any more. So remove this check. Furthermore the explicit nullifcation of rs485_supported is not needed, since the memory has already been set to zeros at allocation. So remove this, too. Fixes: 00d7a00e2a6f ("serial: imx: Fill in rs485_supported") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: make sure RS485 cannot be enabled when it is not supportedLino Sanfilippo
Some uart drivers specify a rs485_config() function and then decide later to disable RS485 support for some reason (e.g. imx and ar933). In these cases userspace may be able to activate RS485 via TIOCSRS485 nevertheless, since in uart_set_rs485_config() an existing rs485_config() function indicates that RS485 is supported. Make sure that this is not longer possible by checking the uarts rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not set. Furthermore instead of returning an empty structure return -ENOTTY if the RS485 configuration is requested via TIOCGRS485 but RS485 is not supported. This has a small impact on userspace visibility but it is consistent with the -ENOTTY error for TIOCGRS485. Fixes: e849145e1fdd ("serial: ar933x: Fill in rs485_supported") Fixes: 55e18c6b6d42 ("serial: imx: Remove serial_rs485 sanitization") Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@vger.kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-5-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-04serial: core: fix sanitizing check for RTS settingsLino Sanfilippo
Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS settings in a RS485 configuration that has been passed by userspace. If RTS-on-send and RTS-after-send are both set or unset the configuration is adjusted and RTS-after-send is disabled and RTS-on-send enabled. This however makes only sense if both RTS modes are actually supported by the driver. With commit be2e2cb1d281 ("serial: Sanitize rs485_struct") the code does take the driver support into account but only checks if one of both RTS modes are supported. This may lead to the errorneous result of RTS-on-send being set even if only RTS-after-send is supported. Fix this by changing the implemented logic: First clear all unsupported flags in the RS485 configuration, then adjust an invalid RTS setting by taking into account which RTS mode is supported. Cc: <stable@vger.kernel.org> Fixes: be2e2cb1d281 ("serial: Sanitize rs485_struct") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240103061818.564-4-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-19 12:28:30 +0000