summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2025-01-17usbip: Fix seqnum sign extension issue in vhci_tx_urbXiong Nandi
The atomic_inc_return function returns an int, while priv->seqnum is an unsigned long. So we must cast the result to u32 to prevent potential sign extension and size mismatch issues. Signed-off-by: Xiong Nandi <xndchn@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20241231161539.20192-2-xndchn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17Merge tag 'usb-serial-6.14-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Merge usb-serial updates from Johan: USB-serial updates for 6.14-rc1 Here are the USB-serial updates for 6.14-rc1, including: - fix a long-standing NULL-deref issue in quatech2 - add support for hardware flow control to ch341 Included is also a related clean up. All have been in linux-next with no reported issues. * tag 'usb-serial-6.14-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb() USB: serial: ch341: use fix-width types consistently USB: serial: ch341: add hardware flow control RTS/CTS
2025-01-15usb: quirks: Add NO_LPM quirk for TOSHIBA TransMemory-Mx deviceMiao Li
TOSHIBA TransMemory-Mx is a good performence flash device, but it doesn't work well with LPM on Huawei hisi platform, so let's disable LPM to resolve the issue. Signed-off-by: Miao Li <limiao@kylinos.cn> Link: https://lore.kernel.org/r/20250113085619.44371-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15usb: dwc3: gadget: Reinitiate stream for all host NoStream behaviorThinh Nguyen
There are too many different host behaviors when it comes to NoStream handling, and not everyone follows the USB and xHCI spec. The DWC3 driver attempts to do some guess work to interop with different hosts, but it can't cover everything. Let's keep it simple and treat every host the same: just retry on NoStream after a 100ms of no response delay. Note that some hosts cannot handle frequent retries. This may affect performance on certain defective hosts, but NoStream is a rare occurrence and interoperability is more important. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/b92ae94c86f01f165d5f178b7767898573b6dc75.1736819308.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-6-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: gadget: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-5-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: phy: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-4-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: typec: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-3-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: host: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-2-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15USB: Replace own str_plural with common oneKrzysztof Kozlowski
Use existing str_plural() helper from string_choices.h to reduce amount of duplicated code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250114-str-enable-disable-usb-v1-1-c8405df47c19@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15xhci: don't mess with ->d_inameAl Viro
use debugs_{creat_file,get}_aux() instead Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250112080705.141166-14-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-15mtu3: don't mess wiht ->d_inameAl Viro
use debugfs_{create_file,get}_aux() instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250112080705.141166-13-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-14USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()Qasim Ijaz
This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following: if (newport > serial->num_ports) { dev_err(&port->dev, "%s - port change to invalid port: %i\n", __func__, newport); break; } The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL: serial_priv->current_port = newport; port = serial->port[serial_priv->current_port]; The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds. Reported-by: syzbot <syzbot+506479ebf12fe435d01a@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=506479ebf12fe435d01a Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: <stable@vger.kernel.org> # 3.5 Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-13Merge 6.13-rc7 into driver-core-nextGreg Kroah-Hartman
We need the debugfs / driver-core fixes in here as well for testing and to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13usb: phy: Remove API devm_usb_put_phy()Zijun Hu
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and the API has no caller now. Remove the API and the static function. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13usb: typec: tcpm: set SRC_SEND_CAPABILITIES timeout to PD_T_SENDER_RESPONSEJos Wang
As PD2.0 spec ("8.3.3.2.3 PE_SRC_Send_Capabilities state"), after the Source receives the GoodCRC Message from the Sink in response to the Source_Capabilities message, it should start the SenderResponseTimer, after the timer times out, the state machine transitions to the HARD_RESET state. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable@vger.kernel.org Signed-off-by: Jos Wang <joswang@lenovo.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20250105135245.7493-1-joswang1221@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-13Merge 6.13-rc7 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: host: xhci-plat: Assign shared_hcd->rsrc_startWangYuli
When inserting a USB device, examining hcd->rsrc_start can be helpful in identifying which hcd is mounted, as the physical address represented here is typically unique. The following code snippet demonstrates this: struct usb_hcd *hcd = bus_to_hcd(udev->bus); unsigned long long usb_hcd_addr = (unsigned long long)hcd->rsrc_start; However, this approach has limitations now. For USB hosts with an MMIO interface, the effectiveness of this method is restricted to USB 2.0. Because commit 3429e91a661e ("usb: host: xhci: add platform driver support") assigned res->start to hcd->rsrc_start. But shared_hcd->rsrc_start remains unassigned, which is also necessary in certain scenarios. Fixes: 3429e91a661e ("usb: host: xhci: add platform driver support") Co-developed-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> Link: https://lore.kernel.org/r/186B9F56972457B4+20250107133854.172309-1-wangyuli@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: dwc3: omap: Fix devm_regulator_get_optional() error handlingRob Herring (Arm)
Commit 533561a8aad5 ("usb: dwc3: omap: Use devm_regulator_get_optional()") assumed NULL was returned, but devm_regulator_get_optional() returns -ENODEV rather than NULL like other *_get_optional() functions. Fixes: 533561a8aad5 ("usb: dwc3: omap: Use devm_regulator_get_optional()") Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250109170748.3852439-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: dwc3: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()Raphael Gallais-Pou
Letting the compiler remove these functions when the kernel is built without CONFIG_PM_SLEEP support is simpler and less error prone than the use of #ifdef based kernel configuration guards. Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250109152055.52931-1-rgallaispou@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: dwc3-am62: Fix an OF node leak in phy_syscon_pll_refclk()Joe Hattori
phy_syscon_pll_refclk() leaks an OF node obtained by of_parse_phandle_with_fixed_args(), thus add an of_node_put() call. Cc: stable <stable@kernel.org> Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250109001638.70033-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: dwc3: Skip resume if pm_runtime_set_active() failsRay Chi
When the system begins to enter suspend mode, dwc3_suspend() is called by PM suspend. There is a problem that if someone interrupt the system suspend process between dwc3_suspend() and pm_suspend() of its parent device, PM suspend will be canceled and attempt to resume suspended devices so that dwc3_resume() will be called. However, dwc3 and its parent device (like the power domain or glue driver) may already be suspended by runtime PM in fact. If this sutiation happened, the pm_runtime_set_active() in dwc3_resume() will return an error since parent device was suspended. This can lead to unexpected behavior if DWC3 proceeds to execute dwc3_resume_common(). EX. RPM suspend: ... -> dwc3_runtime_suspend() -> rpm_suspend() of parent device ... PM suspend: ... -> dwc3_suspend() -> pm_suspend of parent device ^ interrupt, so resume suspended device ... <- dwc3_resume() <-/ ^ pm_runtime_set_active() returns error To prevent the problem, this commit will skip dwc3_resume_common() and return the error if pm_runtime_set_active() fails. Fixes: 68c26fe58182 ("usb: dwc3: set pm runtime active before resume common") Cc: stable <stable@kernel.org> Signed-off-by: Ray Chi <raychi@google.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20250106082240.3822059-1-raychi@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: typec: cros-ec-ucsi: Mark cros_ucsi_ops static/constStephen Boyd
This structure isn't used outside this file and can be marked const so that it gets moved to read-only memory. Cc: Pavan Holla <pholla@chromium.org> Cc: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Cc: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://lore.kernel.org/r/20250109220655.1677506-3-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-11usb: typec: cros-ec-ucsi: Add newlines to printk messagesStephen Boyd
These printks need newlines. Add them and convert to dev_err_probe() in cros_ucsi_probe() to simplify code. Cc: Pavan Holla <pholla@chromium.org> Cc: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Cc: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://lore.kernel.org/r/20250109220655.1677506-2-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-10usb-storage: fix queue freeze vs limits lock orderChristoph Hellwig
Match the locking order used by the core block code by only freezing the queue after taking the limits lock using the queue_limits_commit_update_frozen helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250110054726.1499538-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-01-10Merge tag 'usb-serial-6.13-rc7' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.13-rc7 Here are some new modem and cp210x device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Neoway N723-EA support USB: serial: option: add MeiG Smart SRM815 USB: serial: cp210x: add Phoenix Contact UPS Device
2025-01-08treewide: Introduce kthread_run_worker[_on_cpu]()Frederic Weisbecker
kthread_create() creates a kthread without running it yet. kthread_run() creates a kthread and runs it. On the other hand, kthread_create_worker() creates a kthread worker and runs it. This difference in behaviours is confusing. Also there is no way to create a kthread worker and affine it using kthread_bind_mask() or kthread_affine_preferred() before starting it. Consolidate the behaviours and introduce kthread_run_worker[_on_cpu]() that behaves just like kthread_run(). kthread_create_worker[_on_cpu]() will now only create a kthread worker without starting it. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
2025-01-08USB: serial: ch341: use fix-width types consistentlyJohan Hovold
Use Linux fix-width types consistently and drop a related unnecessary cast. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: option: add Neoway N723-EA supportMichal Hrusecky
Update the USB serial option driver to support Neoway N723-EA. ID 2949:8700 Marvell Mobile Composite Device Bus T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2949 ProdID=8700 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=200806006809080000 C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Tested successfully connecting to the Internet via rndis interface after dialing via AT commands on If#=4 or If#=6. Not sure of the purpose of the other serial interface. Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: option: add MeiG Smart SRM815Chukun Pan
It looks like SRM815 shares ID with SRM825L. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=123456 C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Link: https://lore.kernel.org/lkml/20241215100027.1970930-1-amadeus@jmu.edu.cn/ Link: https://lore.kernel.org/all/4333b4d0-281f-439d-9944-5570cbc4971d@gmail.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: cp210x: add Phoenix Contact UPS DeviceJohan Hovold
Phoenix Contact sells UPS Quint devices [1] with a custom datacable [2] that embeds a Silicon Labs converter: Bus 001 Device 003: ID 1b93:1013 Silicon Labs Phoenix Contact UPS Device Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1b93 idProduct 0x1013 bcdDevice 1.00 iManufacturer 1 Silicon Labs iProduct 2 Phoenix Contact UPS Device iSerial 3 <redacted> bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0020 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 2 Phoenix Contact UPS Device Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 [1] https://www.phoenixcontact.com/en-pc/products/power-supply-unit-quint-ps-1ac-24dc-10-2866763 [2] https://www.phoenixcontact.com/en-il/products/data-cable-preassembled-ifs-usb-datacable-2320500 Reported-by: Giuseppe Corbelli <giuseppe.corbelli@antaresvision.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-08USB: serial: ch341: add hardware flow control RTS/CTSLode Willems
This adds support for enabling and disabling RTS/CTS hardware flow control. Tested using CH341A and CH340E. Fixes part of the following bug report: Link: https://bugzilla.kernel.org/show_bug.cgi?id=197109 Signed-off-by: Lode Willems <me@lodewillems.com> [ johan: prepare index argument once, drop casts ] Signed-off-by: Johan Hovold <johan@kernel.org>
2025-01-07usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()GONG Ruiqi
The error handling for the case `con_index == 0` should involve dropping the pm usage counter, as ucsi_ccg_sync_control() gets it at the beginning. Fix it. Cc: stable <stable@kernel.org> Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()") Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb-storage: Add max sectors quirk for Nokia 208Lubomir Rintel
This fixes data corruption when accessing the internal SD card in mass storage mode. I am actually not too sure why. I didn't figure a straightforward way to reproduce the issue, but i seem to get garbage when issuing a lot (over 50) of large reads (over 120 sectors) are done in a quick succession. That is, time seems to matter here -- larger reads are fine if they are done with some delay between them. But I'm not great at understanding this sort of things, so I'll assume the issue other, smarter, folks were seeing with similar phones is the same problem and I'll just put my quirk next to theirs. The "Software details" screen on the phone is as follows: V 04.06 07-08-13 RM-849 (c) Nokia TL;DR version of the device descriptor: idVendor 0x0421 Nokia Mobile Phones idProduct 0x06c2 bcdDevice 4.06 iManufacturer 1 Nokia iProduct 2 Nokia 208 The patch assumes older firmwares are broken too (I'm unable to test, but no biggie if they aren't I guess), and I have no idea if newer firmware exists. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07usb: gadget: midi2: Reverse-select at the right placeTakashi Iwai
We should do reverse selection of other components from CONFIG_USB_F_MIDI2 which is tristate, instead of CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle module dependencies. Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver") Cc: stable <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03usb: typec: class: Remove both cable_match() and partner_match()Zijun Hu
cable_match(), as matching function of device_find_child(), matches a device with device type @typec_cable_dev_type, and its task can be simplified by the recently introduced API device_match_type(). partner_match() is similar with cable_match() but with a different device type @typec_partner_dev_type. Remove both functions and use the API plus respective device type instead. Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-12-6623037414d4@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03driver core: Constify API device_find_child() and adapt for various usagesZijun Hu
Constify the following API: struct device *device_find_child(struct device *dev, void *data, int (*match)(struct device *dev, void *data)); To : struct device *device_find_child(struct device *dev, const void *data, device_match_t match); typedef int (*device_match_t)(struct device *dev, const void *data); with the following reasons: - Protect caller's match data @*data which is for comparison and lookup and the API does not actually need to modify @*data. - Make the API's parameters (@match)() and @data have the same type as all of other device finding APIs (bus|class|driver)_find_device(). - All kinds of existing device match functions can be directly taken as the API's argument, they were exported by driver core. Constify the API and adapt for various existing usages. BTW, various subsystem changes are squashed into this commit to meet 'git bisect' requirement, and this commit has the minimal and simplest changes to complement squashing shortcoming, and that may bring extra code improvement. Reviewed-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for drivers/pwm Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20241224-const_dfc_done-v5-4-6623037414d4@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03usb: typec: ucsi: Implement ChromeOS UCSI driverPavan Holla
Implementation of a UCSI transport driver for ChromeOS. This driver will be loaded if the ChromeOS EC implements a PPM. Signed-off-by: Pavan Holla <pholla@chromium.org> Co-developed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Co-developed-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org> Link: https://lore.kernel.org/r/20241231131047.1757434-3-ukaszb@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03usb: dwc3: omap: Use devm_regulator_get_optional()Rob Herring (Arm)
The 'vbus-supply' regulator is optional, so use devm_regulator_get_optional() instead of checking for property presence first. While here, rework the error handling to use dev_err_probe() which handles deferred probe correctly without an error message. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20241231164456.262581-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-03usb: cdns3: remove redundant if branchHongyu Xie
cdns->role_sw->dev->driver_data gets set in routines showing below, cdns_init sw_desc.driver_data = cdns; cdns->role_sw = usb_role_switch_register(dev, &sw_desc); dev_set_drvdata(&sw->dev, desc->driver_data); In cdns_resume, cdns->role = cdns_role_get(cdns->role_sw); //line redundant struct cdns *cdns = usb_role_switch_get_drvdata(sw); dev_get_drvdata(&sw->dev) return dev->driver_data return cdns->role; "line redundant" equals to, cdns->role = cdns->role; So fix this if branch. Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20241231013641.23908-1-xiehongyu1@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27usb: typec: ucsi: make yoga_c630_ucsi_ops be staticPei Xiao
sparse warnings: drivers/usb/typec/ucsi/ucsi_yoga_c630.c:101:30: sparse: sparse: symbol 'yoga_c630_ucsi_ops' was not declared. Should it be static? Add static to fix sparse warnings. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412102033.J4vZNaaR-lkp@intel.com/ Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn> Link: https://lore.kernel.org/r/cefe3bc20b2ddaee2a0924ba32243f035e92a025.1735289530.git.xiaopei01@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27xhci: Add missing capability definition bitsMathias Nyman
Add capability bits for the xHC Capability Parameters 2 (HCCPARAMS2) register described in xHCI specification section 5.3.9 bit 7 Extended TBC TRB Status Capability (ETC_TSC) bit 8 Get/Set Extended Property Capability (GSC) bit 9 Virtualization Based Trusted I/O Capability (VTC) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27xhci: Add command completion parameter supportMathias Nyman
xHC hosts can pass 24 bits of data with a command completion event TRB as the completion code only uses 8 bits of the 32 bit status field. Only Configure Endpoint, and Get Extended Property commands utilize this "command completion parameter" 24 bit field. For other command completion events the xHC should keep it RsvdZ. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27usb: xhci: Fix NULL pointer dereference on certain command abortsMichal Pecio
If a command is queued to the final usable TRB of a ring segment, the enqueue pointer is advanced to the subsequent link TRB and no further. If the command is later aborted, when the abort completion is handled the dequeue pointer is advanced to the first TRB of the next segment. If no further commands are queued, xhci_handle_stopped_cmd_ring() sees the ring pointers unequal and assumes that there is a pending command, so it calls xhci_mod_cmd_timer() which crashes if cur_cmd was NULL. Don't attempt timer setup if cur_cmd is NULL. The subsequent doorbell ring likely is unnecessary too, but it's harmless. Leave it alone. This is probably Bug 219532, but no confirmation has been received. The issue has been independently reproduced and confirmed fixed using a USB MCU programmed to NAK the Status stage of SET_ADDRESS forever. Everything continued working normally after several prevented crashes. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219532 Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,") CC: stable@vger.kernel.org Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27xhci: dbgtty: Improve performance by handling received data immediately.Mathias Nyman
Improve dbc transfer rate performance by copying the received data to the tty buffer directly in the request complete callback function if possible. Only defer it in case there is already pending deferred work, tty is throttled, or we fail copy the data to the tty buffer The request complete callback is already called by a workqueue. This is part 3/3 of a dbc performance improvement series that roughly triples dbc performace when using adb push and pull over dbc. Max/min push rate after patches is 210/118 MB/s, pull rate 171/133 MB/s, tested with large files (300MB-9GB) by Łukasz Bartosik Cc: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-27xhci: dbc: Improve performance by removing delay in transfer event polling.Mathias Nyman
Queue event polling work with 0 delay in case there are pending transfers queued up. This is part 2 of a 3 part series that roughly triples dbc performace when using adb push and pull over dbc. Max/min push rate after patches is 210/118 MB/s, pull rate 171/133 MB/s, tested with large files (300MB-9GB) by Łukasz Bartosik First performance improvement patch was commit 31128e7492dc ("xhci: dbc: add dbgtty request to end of list once it completes") Cc: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241227120142.1035206-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Refactor goto check_conditionThinh Nguyen
Move the command initialization before the check_condition to after the goto statement for a cleaner look. No functional change here. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8442364f51f2788d2a191997581a8eda7a143272.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Track BOT command krefThinh Nguyen
Set TARGET_SCF_ACK_KREF flag and allow f_tcm to take the BOT command reference. A usb request may be canceled, the f_tcm knows this. Let it decides if the command should be freed. This is the same as how the UAS interface is done. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e791c639e91b5d91a8787f5d6902e8c58f1dc172.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Requeue command request on errorThinh Nguyen
If there's error on command request, make sure to requeue to receive the next one. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/d4e55c13be8f83f99ee55f7b979a99e2c14fc4c8.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-24usb: gadget: f_tcm: Stall on invalid CBWThinh Nguyen
If the BOT command CBW is invalid, make sure to respond by setting status endpoint STALL until the next proper CBW or reset. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/96022e2d5225f01a20263a4ba9c2e2c8a63328b8.1733876548.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-18 05:06:25 +0000