summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2024-08-13usb: gadget: f_uac2: Expose all string descriptors through configfs.Chris Wulff
This makes all string descriptors configurable for the UAC2 gadget so the user can configure names of terminals and controls. Alt mode names are not included for now and will be in future work related to adding alternate settings. discussion thread for api changes for alt mode settings: https://lore.kernel.org/linux-usb/35be4668-58d3-894a-72cf-de1afaacae45@ivitera.com/T/ Signed-off-by: Chris Wulff <chris.wulff@biamp.com> Link: https://lore.kernel.org/r/20240804001923.3279431-2-crwulff@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: phy: mxs: enable weak 1p1 regulator for imx6ul during suspendXu Yang
1p1 is off when the system enters suspend at i.MX6UL. It cause the PHY get wrong USB DP/DM value, then unexpected wakeup may occur if USB wakeup enabled. This will enable weak 1p1 during PHY suspend if vbus exist. So USB DP/DM is correct when system suspend. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240726113207.3393247-5-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: phy: mxs: add wakeup enable for imx7ulpXu Yang
This wakeup setting can enable USB wakeup function even the controller's power is lost, and both A7 and M4 are in VLLS mode. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240726113207.3393247-4-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: phy: mxs: keep USBPHY2's clk always onXu Yang
IP require keep USBPHY2's clk always on, so USBPHY2 (PLL7) power can be controlled by suspend signal. USB remote wakeup needs resume signal be sent out as soon as possible to match USB requirements. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240726113207.3393247-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: phy: mxs: enable regulator phy-3p0 to improve signal qualiltyXu Yang
Enable regulator 'phy-3p0' to pass eye diagram test since it improve signal qualilty. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240726113207.3393247-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: typec: tcpm/tcpci_maxim: fix non-contaminant CC handlingAndré Draszik
tcpci_maxim currently never triggers the TCPM state machine when CC status has not changed due to a contaminant but due to a real connection event, i.e. a genuine plug event, meaning the system will stay idle and not notify any subscribers. The reason is that the initial state of the port is 'toggling', which causes _max_tcpci_irq() to only drive the contamination part of the TCPM state machine (via tcpm_port_clean()). What should happen instead is that if no contamination was detected, the TCPM should be notified of the CC change in this case. To fix this, we update ...is_contaminant() to also allow its caller to determine if more CC processing is required and then call into the TCPM as required. While at it, add a kernel-doc for max_contaminant_is_contaminant(). Note: the code has an issue where I2C errors during contaminant detection also cause the TCPM state machine to not be updated. This commit doesn't change this behaviour and should be addressed by follow-up commit(s). Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240806-max33359-toggling-v2-1-a66ab37baafb@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]Hans de Goede
Add LJCA GPIO support for the Lunar Lake platform. New HID taken from out of tree ivsc-driver git repo. Link: https://github.com/intel/ivsc-driver/commit/47e7c4a446c8ea8c741ff5a32fa7b19f9e6fd47e Cc: stable <stable@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240812095038.555837-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"Xu Yang
This reverts commit bf20c69cf3cf9c6445c4925dd9a8a6ca1b78bfdf. During tcpm_init() stage, if the VBUS is still present after tcpm_reset_port(), then we assume that VBUS will off and goto safe0v after a specific discharge time. Following a TCPM_VBUS_EVENT event if VBUS reach to off state. TCPM_VBUS_EVENT event may be set during PORT_RESET handling stage. If pd_events reset to 0 after TCPM_VBUS_EVENT set, we will lost this VBUS event. Then the port state machine may stuck at one state. Before: [ 2.570172] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS] [ 2.570179] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 2.570182] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS] [ 3.490213] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [delayed 920 ms] [ 3.490220] Start toggling [ 3.546050] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected] [ 3.546057] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS] After revert this patch, we can see VBUS off event and the port will goto expected state. [ 2.441992] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev1 NONE_AMS] [ 2.441999] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 2.442002] pending state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED @ 920 ms [rev1 NONE_AMS] [ 2.442122] VBUS off [ 2.442125] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev1 NONE_AMS] [ 2.442127] VBUS VSAFE0V [ 2.442351] CC1: 0 -> 0, CC2: 0 -> 0 [state SNK_UNATTACHED, polarity 0, disconnected] [ 2.442357] Start toggling [ 2.491850] CC1: 0 -> 0, CC2: 0 -> 2 [state TOGGLING, polarity 0, connected] [ 2.491858] state change TOGGLING -> SRC_ATTACH_WAIT [rev1 NONE_AMS] [ 2.491863] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms [rev1 NONE_AMS] [ 2.691905] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms] Fixes: bf20c69cf3cf ("usb: typec: tcpm: clear pd_event queue in PORT_RESET") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240809112901.535072-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: typec: ucsi: Fix the return value of ucsi_run_command()Heikki Krogerus
The command execution routines need to return the amount of data that was transferred when succesful. This fixes an issue where the alternate modes and the power delivery capabilities are not getting registered. Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240809150343.286942-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: xhci: fix duplicate stall handling in handle_tx_event()Niklas Neronin
Stall handling is managed in the 'process_*' functions, which are called right before the 'goto' stall handling code snippet. Thus, there should be a return after the 'process_*' functions. Otherwise, the stall code may run twice. Fixes: 1b349f214ac7 ("usb: xhci: add 'goto' for halted endpoint check in handle_tx_event()") Reported-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240809124408.505786-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-13usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()Marc Zyngier
If xhci_mem_init() fails, it calls into xhci_mem_cleanup() to mop up the damage. If it fails early enough, before xhci->interrupters is allocated but after xhci->max_interrupters has been set, which happens in most (all?) cases, things get uglier, as xhci_mem_cleanup() unconditionally derefences xhci->interrupters. With prejudice. Gate the interrupt freeing loop with a check on xhci->interrupters being non-NULL. Found while debugging a DMA allocation issue that led the XHCI driver on this exact path. Fixes: c99b38c41234 ("xhci: add support to allocate several interrupters") Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Wesley Cheng <quic_wcheng@quicinc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # 6.8+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240809124408.505786-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-12Merge 6.11-rc3 into usb-nextGreg Kroah-Hartman
We need the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07xhci-pci: Make xhci-pci-renesas a proper modular driverBen Hutchings
If CONFIG_USB_XHCI_PCI_RENESAS is enabled, xhci-pci conditionally calls into the xhci-pci-renesas module, which means both modules must be loaded to use any xHCI PCI controller. The MODULE_FIRMWARE declaration in the base xhci-pci module causes initramfs-tools to check for and warn about missing firmware for the Renesas xHCI controllers, when any xHCI PCI controller is present. And because of the previous oddity, simply moving this declaration to xhci-pci-renesas wouldn't help. To fix this, reverse the relationship between the modules: - Remove the quirk for the Renesas xHCIs, and the driver_data structure used only for them - In xhci-pci: - Rename xhci_pci_probe() to xhci_pci_common_probe() - Export xhci_pci_common_probe() and xhci_pci_remove() - Use a new probe function that rejects the Renesas xHCIs and then calls the common probe function - In xhci-pci-renesas: - Stop exporting renesas_xhci_check_request_fw() - Add a probe function that calls renesas_xhci_check_request_fw() followed by xhci_pci_common_probe() - Add and register a new pci_driver matching only the Renesas xHCIs and using its own probe function, but with other operations the same as in xhci-pci - Make CONFIG_USB_XHCI_PCI_RENESAS depend on CONFIG_USB_XHCI_PCI, not the other way around Finally, move the MODULE_FIRMWARE declaration to xhci-pci-renesas. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Cyril Brulebois <cyril@debamax.com> Link: https://lore.kernel.org/r/ZqqfXYRJf7kGaqus@decadent.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: dwc3: Use of_property_read_variable_u32_array() to read "power"Rob Herring (Arm)
There's no need to get the length of an DT array property before parsing the array. of_property_read_variable_u32_array() takes a minimum and maximum length and returns the actual length (or error code). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240731201407.1838385-5-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: dwc3: imx8mp: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives. The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS() allows the compiler to evaluate if the runtime suspend/resume() functions are used at build time or are simply dead code. This allows removing the __maybe_unused notation from the runtime suspend/resume() functions. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240806114231.2603055-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: gadget: u_audio: Use C99 syntax for array initializersAbhishek Tamboli
Convert array initializers to C99 syntax by adding the '=' after each designated initializer. Fix the following smatch warnings: drivers/usb/gadget/function/u_audio.c:1117:20: warning: obsolete array initializer, use C99 syntax drivers/usb/gadget/function/u_audio.c:1124:28: warning: obsolete array initializer, use C99 syntax drivers/usb/gadget/function/u_audio.c:1131:19: warning: obsolete array initializer, use C99 syntax drivers/usb/gadget/function/u_audio.c:1138:27: warning: obsolete array initializer, use C99 syntax drivers/usb/gadget/function/u_audio.c:1145:25: warning: obsolete array initializer, use C99 syntax Also, fix two checkpatch.pl warnings: WARNING: please, no spaces at the start of a line + [UAC_FBACK_CTRL] = {$ WARNING: please, no spaces at the start of a line + [UAC_MUTE_CTRL] = {$ Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com> Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net> Link: https://lore.kernel.org/r/20240801190209.500373-1-abhishektamboli9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: chipidea: Use of_property_present()Rob Herring (Arm)
Use of_property_present() to test for property presence rather than of_get_property(). This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240731191312.1710417-18-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: use device managed TCPCI port deregistrationAndré Draszik
Instead of open-coding the call to tcpci_unregister_port() in various places, let's just register a hook using devm_add_action_or_reset() so that it gets called automatically as and when necessary by the device management APIs. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-15-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: convert to dev_err_probe()André Draszik
dev_err_probe() exists as a useful helper ensuring standardized error messages during .probe() and using it also helps to make the code more legible. Use it. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-14-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: use GENMASK() for TCPC_VENDOR_ADC_CTRL1 registerAndré Draszik
Convert register TCPC_VENDOR_ADC_CTRL1 to using GENMASK() and FIELD_PREP() so as to keep using a similar approach throughout the code base and make it arguably easier to read. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-13-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: use GENMASK() for TCPC_VENDOR_CC_CTRL3 registerAndré Draszik
Convert register TCPC_VENDOR_CC_CTRL3 to using GENMASK() so as to keep using a similar approach throughout the code base and make it arguably easier to read. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-12-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: use GENMASK() for TCPC_VENDOR_CC_CTRL2 registerAndré Draszik
Convert register TCPC_VENDOR_CC_CTRL2 to using GENMASK() and FIELD_PREP() so as to keep using a similar approach throughout the code base and make it arguably easier to read. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-11-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: drop STATUS_CHECK()André Draszik
Only one user of STATUS_CHECK() remains, and the code can actually be made more legible by simply avoiding the use of that wrapper macro, allowing to also drop the macro altogether. Do so. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-10-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: simplify clearing of TCPC_ALERT_RX_BUF_OVFAndré Draszik
There is no need for using the ternary if/else here, simply mask TCPC_ALERT_RX_BUF_OVF as necessary, which arguably makes the code easier to read. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-9-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: sort TCPC_ALERT_MASK values by bitAndré Draszik
This makes it easier to see what's missing and what's being programmed. While at it, add brackets to help with formatting and remove a comment that doesn't add much value. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-8-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpci: use GENMASK() for TCPC_TRANSMIT register fieldsAndré Draszik
Convert all fields from register TCPC_TRANSMIT to using GENMASK() and FIELD_PREP() so as to keep using a similar approach throughout the code base and make it arguably easier to read. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-7-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpci: use GENMASK() for TCPC_MSG_HDR_INFO_REVAndré Draszik
Convert field TCPC_MSG_HDR_INFO_REV from register TCPC_MSG_HDR_INFO to using GENMASK() and FIELD_PREP() so as to keep using a similar approach for all fields. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-6-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpci: use GENMASK() for TCPC_ROLE_CTRL_RP_VALAndré Draszik
Align the last remaining field TCPC_ROLE_CTRL_RP_VAL with the other fields in the TCPC_ROLE_CTRL register by using GENMASK() and FIELD_PREP(). Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-5-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpci: use GENMASK() for TCPC_ROLE_CTRL_CC[12]André Draszik
All this open-coded shifting and masking is quite hard to read, in particular the if-statement in tcpci_apply_rc(). Declare TCPC_ROLE_CTRL_CC[12] using GENMASK() which allows using FIELD_GET() and FIELD_PREP() to arguably make the code more legible. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-4-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpci: use GENMASK() for TCPC_CC_STATUS_CC[12]André Draszik
The existing code here, particularly in maxim_contaminant.c, is arguably quite hard to read due to the open-coded masking and shifting spanning multiple lines. Use GENMASK() and FIELD_GET() instead, which arguably make the code much easier to follow. While at it, use the symbolic name TCPC_CC_STATE_SRC_OPEN for one instance of open-coded 0x0. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-3-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm/tcpci_maxim: clarify a commentAndré Draszik
We loop while the status is != 0, so rephrase the comment slightly for clarity. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240710-tcpc-cleanup-v1-2-0ec1f41f4263@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()Heikki Krogerus
The function returns with the ppm_lock held if the PPM is busy or there's an error. Reported-and-tested-by: Luciano Coelho <luciano.coelho@intel.com> Fixes: 5e9c1662a89b ("usb: typec: ucsi: rework command execution functions") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reported-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20240806112029.2984319-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received ↵Xu Yang
source capability message Since commit (122968f8dda8 usb: typec: tcpm: avoid resets for missing source capability messages), state will change from SNK_WAIT_CAPABILITIES to SNK_WAIT_CAPABILITIES_TIMEOUT. We need to change SNK_WAIT_CAPABILITIES -> SNK_READY path to SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_READY accordingly. Otherwise, the sink port will never change to SNK_READY state if the source does't have PD capability. [ 503.547183] pending state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT @ 310 ms [rev3 NONE_AMS] [ 503.857239] state change SNK_WAIT_CAPABILITIES -> SNK_WAIT_CAPABILITIES_TIMEOUT [delayed 310 ms] [ 503.857254] PD TX, header: 0x87 [ 503.862440] PD TX complete, status: 2 [ 503.862484] state change SNK_WAIT_CAPABILITIES_TIMEOUT -> SNK_UNATTACHED [rev3 NONE_AMS] Fixes: 122968f8dda8 ("usb: typec: tcpm: avoid resets for missing source capability messages") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20240802064156.1846768-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()Tudor Ambarus
The ``alt`` parameter was used as a way to differentiate between f->disable() and f->set_alt(). As the code paths diverge quite a bit, pull out the f->disable() code from ffs_func_set_alt(), everything will become clearer and less error prone. No change in functionality intended. Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240802140428.2000312-3-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07usb: gadget: f_fs: restore ffs_func_disable() functionalityTudor Ambarus
The blamed commit made ffs_func_disable() always return -EINVAL as the method calls ffs_func_set_alt() with the ``alt`` argument being ``(unsigned)-1``, which is always greater than MAX_ALT_SETTINGS. Use the MAX_ALT_SETTINGS check just in the f->set_alt() code path, f->disable() doesn't care about the ``alt`` parameter. Make a surgical fix, but really the f->disable() code shall be pulled out from ffs_func_set_alt(), the code will become clearer. A patch will follow. Note that ffs_func_disable() always returning -EINVAL made pixel6 crash on USB disconnect. Fixes: 2f550553e23c ("usb: gadget: f_fs: Add the missing get_alt callback") Cc: stable <stable@kernel.org> Reported-by: William McVicker <willmcvicker@google.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240802140428.2000312-2-tudor.ambarus@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-07Merge tag 'usb-serial-6.11-rc2' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fix for 6.11-rc2 Here's a fix for an issue when using the usb_debug driver with Xen. This change has been in linux-next for a couple of days with no reported issues. * tag 'usb-serial-6.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: debug: do not echo input by default
2024-07-31USB: serial: debug: do not echo input by defaultMarek Marczykowski-Górecki
This driver is intended as a "client" end of the console connection. When connected to a host it's supposed to receive debug logs, and possibly allow to interact with whatever debug console is available there. Feeding messages back, depending on a configuration may cause log messages be executed as shell commands (which can be really bad if one is unlucky, imagine a log message like "prevented running `rm -rf /home`"). In case of Xen, it exposes sysrq-like debug interface, and feeding it its own logs will pretty quickly hit 'R' for "instant reboot". Contrary to a classic serial console, the USB one cannot be configured ahead of time, as the device shows up only when target OS is up. And at the time device is opened to execute relevant ioctl, it's already too late, especially when logs start flowing shortly after device is initialized. Avoid the issue by changing default to no echo for this type of devices. Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> [ johan: amend summary; disable also ECHONL ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-07-31usb: dwc2: Skip clock gating on Broadcom SoCsStefan Wahren
On resume of the Raspberry Pi the dwc2 driver fails to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling the interrupts. This causes a situation where both handler ignore a incoming port interrupt and force the upper layers to disable the dwc2 interrupt line. This leaves the USB interface in a unusable state: irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.10.0-rc3 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1b01f20 to 0xc1b01f68) 1f20: 0005c0d4 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8 1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<f539e0f4>] dwc2_handle_common_intr [<75cd278b>] usb_hcd_irq Disabling IRQ #66 Disabling clock gating workaround this issue. Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Link: https://lore.kernel.org/linux-usb/3fd0c2fb-4752-45b3-94eb-42352703e1fd@gmx.net/T/ Link: https://lore.kernel.org/all/5e8cbce0-3260-2971-484f-fc73a3b2bd28@synopsys.com/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20240728130029.78279-5-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: dwc2: Add comment about BCM2848 ACPI IDStefan Wahren
During recent code review the different naming between ACPI and OF IDs led to confusion. So add a clarifying comment. Link: https://lore.kernel.org/linux-usb/38e46b44-6248-45e8-bdf9-66008a2fe290@arm.com/ Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240728130029.78279-4-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: dwc2: debugfs: Print parameter no_clock_gatingStefan Wahren
The commit c4a0f7a6ab54 ("usb: dwc2: Skip clock gating on Samsung SoCs") introduced a parameter to skip enabling clock gating mode even the hardware platform should supports it. In order to make this more visible also print this in show parameters of debugfs. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20240728130029.78279-3-wahrenst@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: misc: eud: switch to fallback compatible for device matchingKrzysztof Kozlowski
The bindings require two compatibles to be used: qcom,sc7280-eud followed by fallback qcom,eud. The convention is to use fallback compatible in OF device ID tables, unless some device-specific quirks are needed. This will also simplify matching any new devices - they will use existing OF device ID entry, instead of adding a new one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240731054438.9073-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: gadget: u_serial: add .get_icount() supportMichael Walle
Add icount support for the transmitting and receiving characters. This will make the tty LED trigger work with the ttyGS devices. Signed-off-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20240730193840.2580358-1-mwalle@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: typec: ucsi: glink: Remove unnecessary semicolonChen Ni
Remove unnecessary semicolon at the end of the switch statement. This is detected by coccinelle. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240715073947.4028319-1-nichen@iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usbip: Add USB_SPEED_SUPER_PLUS as valid argŁukasz Bartosik
Add USB_SPEED_SUPER_PLUS as valid argument to allow to attach USB SuperSpeed+ devices. Update speed of virtual HC to SuperSpeed+ as well. Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20240715131131.3876380-1-ukaszb@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31USB: ohci-ppc-of: Drop ohci-littledian compatibleKrzysztof Kozlowski
The "ohci-littledian" compatible has typo (edian->endian) and is not used in in-kernel DTS. Considering the typo and that it is an very old driver (~2006), drop the compatible. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240712120947.86181-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: gadget: f_uac1: Expose all string descriptors through configfs.Chris Wulff
This makes all string descriptors configurable for the UAC1 gadget so the user can configure names of terminals/controls/alt modes. Signed-off-by: Chris Wulff <chris.wulff@biamp.com> Link: https://lore.kernel.org/r/CO1PR17MB541911B0C80D21E4B575E48CE1112@CO1PR17MB5419.namprd17.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: typec: tipd: Delete extra semi-colonHarshit Mogalapalli
There shouldn't be a ; at the end of the function, delete it. Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Javier Carrasco <javier.carrasco@wolfvision.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240724162356.992763-2-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()Harshit Mogalapalli
release_firmware() already frees fw, fix this my moving release_firmware after the dereference. Fixes: 916b8e5fa73d ("usb: typec: tipd: add error log to provide firmware name and size") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20240724162356.992763-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: gadget: u_serial: Set start_delayed during suspendPrashanth K
Upstream commit aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks") added started_delayed flag, so that new ports which are opened after USB suspend can start IO while resuming. But if the port was already opened, and gadget suspend kicks in afterwards, start_delayed will never be set. This causes resume to bail out before calling gs_start_io(). Fix this by setting start_delayed during suspend. Fixes: aba3a8d01d62 ("usb: gadget: u_serial: add suspend resume callbacks") Cc: stable@vger.kernel.org Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/20240730125754.576326-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-31usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()Dan Carpenter
The tcpci_check_std_output_cap() function is supposed to return negative error codes but it's declared as type bool so the error handling doesn't work. Declare it as an int instead. Fixes: 62ce9ef14797 ("usb: typec: tcpci: add support to set connector orientation") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/b0880888-6719-4614-91fc-8ee63b71d304@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-07-19 17:28:01 +0000