| Age | Commit message (Collapse) | Author |
|---|
|
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers")
Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Perhaps unsurprisingly there are some platforms where the GTDT isn't
quite right and the Platforms Timer array overflows the length of the
overall table.
While the recently-added sanity checking isn't wrong, it makes it
impossible to boot the kernel on offending platforms. Try to hobble
along and limit the Platform Timer count to the bounds of the table.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Zheng Zengkai <zhengzengkai@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
|
|
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For successful XDP_TX and XDP_REDIRECT cases, the packet was received
successfully so update RX statistics. Use original received
packet length for that.
TX packets statistics are incremented on TX completion so don't
update it while TX queueing.
If xdp_convert_buff_to_frame() fails, increment tx_dropped.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-11 (idpf, ixgbe, igc)
For idpf:
Sridhar fixes a couple issues in handling of RSC packets.
Josh adds a call to set_real_num_queues() to keep queue count in sync.
For ixgbe:
Piotr removes missed IS_ERR() removal when ERR_PTR usage was removed.
For igc:
Zdenek Bouska fixes reporting of Rx timestamp with AF_XDP.
Siang sets buffer type on empty frame to ensure proper handling.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Set buffer type for empty frames in igc_init_empty_frame
igc: Fix HW RX timestamp when passed by ZC XDP
ixgbe: Fix possible skb NULL pointer dereference
idpf: call set_real_num_queues in idpf_open
idpf: record rx queue in skb for RSC packets
idpf: fix handling rsc packet with a single segment
====================
Link: https://patch.msgid.link/20250211214343.4092496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
It is possible for some waves in a workgroup to finish their save
sequence before the group leader has had time to capture the workgroup
barrier state. When this happens, having those waves exit do impact the
barrier state. As a consequence, the state captured by the group leader
is invalid, and is eventually incorrectly restored.
This patch proposes to have all waves in a workgroup wait for each other
at the end of their save sequence (just before calling s_endpgm_saved).
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b102e ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bump the driver version for RV/PCO compute stability fix
so mesa can use this check to enable compute queues on
RV/PCO.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
When mesa started using compute queues more often
we started seeing additional hangs with compute queues.
Disabling gfxoff seems to mitigate that. Manually
control gfxoff and gfx pg with command submissions to avoid
any issues related to gfxoff. KFD already does the same
thing for these chips.
v2: limit to compute
v3: limit to APUs
v4: limit to Raven/PCO
v5: only update the compute ring_funcs
v6: Disable GFX PG
v7: adjust order
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Suggested-by: Sergey Kovalenko <seryoga.engineering@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-January/119116.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
UVD and VCN were split into separate dpm helpers in commit
ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
as such, there is no need to include UVD in the is_vcn variable since
UVD and VCN are handled by separate dpm helpers now. Fix the check.
Fixes: ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3959
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-February/119827.html
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fix from Lee Jones:
- Fix syscon users not specifying the "syscon" compatible
* tag 'mfd-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: syscon: Restore device_node_to_regmap() for non-syscon nodes
|
|
As reported in the below link, it seems older versions of gcc cannot
determine that the howmany variable is known for all callers. Include
a test so that newer compilers can enforce this sanity check and older
compilers can still work. Add __always_inline attribute to give the
compiler an even better chance to know the inputs.
Link: https://lore.kernel.org/r/20250212185337.293023-1-alex.williamson@redhat.com
Fixes: 4453f360862e ("PCI: Batch BAR sizing operations")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/all/20250209154512.GA18688@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Mitchell Augustin <mitchell.augustin@canonical.com>
|
|
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb40 ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 2c7f45cc7e197a792ce5c693e56ea48f60b312da)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The recent platform profile changes prevent the tpacpi platform driver
from registering. This error is seen in the kernel logs, and the
various tpacpi entries are not created:
[ 7550.642171] platform thinkpad_acpi: Resources present before probing
This happens because devm_platform_profile_register() is called before
tpacpi_pdev probes (thanks to Kurt Borja for identifying the root
cause).
For now revert back to the old platform_profile_register to fix the
issue. This is quick fix and will be re-implemented later as more
testing is needed for full solution.
Tested on X1 Carbon G12.
Fixes: 31658c916fa6 ("platform/x86: thinkpad_acpi: Use devm_platform_profile_register()")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250211173620.16522-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.
This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.
Fixes: b888fb6f2a27 ("gpio: stmpe: i2c transfer are forbiden in atomic context")
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Spurious immediate wake up events are reported on Acer Nitro ANV14. GPIO 11 is
specified as an edge triggered input and also a wake source but this pin is
supposed to be an output pin for an LED, so it's effectively floating.
Block the interrupt from getting set up for this GPIO on this device.
Cc: stable@vger.kernel.org
Reported-by: Delgan <delgan.py@gmail.com>
Tested-by: Delgan <delgan.py@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3954
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250211203222.761206-1-superm1@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
If the netdev lock has been obtained, unlock it before returning.
This bug has been detected by the Clang thread-safety analyzer.
Fixes: afc664987ab3 ("eth: iavf: extend the netdev_lock usage")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20250206175114.1974171-28-bvanassche@acm.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should not be configuring the PHYs clock-stop settings unless the
MAC supports phylink managed EEE. Make this dependent on MAC support.
This was noticed in a suspicious RCU usage report from the kernel
test robot (the suspicious RCU usage due to calling phy_detach()
remains unaddressed, but is triggered by the error this was
generating.)
Fixes: 03abf2a7c654 ("net: phylink: add EEE management")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tgjNn-003q0w-Pw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vxlan_init() must check vxlan_vnigroup_init() success
otherwise a crash happens later, spotted by syzbot.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167]
CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912
Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00
RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb
RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18
RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000
R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000
FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942
unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824
unregister_netdevice_many net/core/dev.c:11866 [inline]
unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736
register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901
__vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981
vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407
rtnl_newlink_create net/core/rtnetlink.c:3795 [inline]
__rtnl_newlink net/core/rtnetlink.c:3906 [inline]
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The structure member documentation refers to a member which does not
exist any more. Remove it.
Link: https://lore.kernel.org/all/202501220046.h3PMBCti-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501220046.h3PMBCti-lkp@intel.com/
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20250211084712.2746705-1-daniel.lezcano@linaro.org
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In some environments, the SCLP firmware interface used to query a
CHPID's configured state is not supported. On these environments,
rapidly reading the corresponding sysfs attribute produces inconsistent
results:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
3
This occurs for example when Linux is run as a KVM guest. The
inconsistency is a result of CIO using cached results for generating
the value of the "configure" attribute while failing to handle the
situation where no data was returned by SCLP.
Fix this by not updating the cache-expiration timestamp when SCLP
returns no data. With the fix applied, the system response is
consistent:
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
$ cat /sys/devices/css0/chp0.00/configure
cat: /sys/devices/css0/chp0.00/configure: Operation not supported
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Tested-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The DT bindings for ov7251 specify "enable" GPIO (xshutdown in
documentation) but the int3472 indiscriminately provides this as a "reset"
GPIO to sensor drivers. Take this into account by assigning it as "enable"
with active high polarity for INT347E devices, i.e. ov7251. "reset" with
active low polarity remains the default GPIO name for other devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-3-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Struct gpiod_lookup flags field's type is unsigned long. Thus use unsigned
long for values to be assigned to that field. Similarly, also call the
field gpio_flags which it really is.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-2-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the
igc_init_empty_frame function. This ensures that the buffer type is
correctly identified and handled during Tx ring cleanup.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fixes HW RX timestamp in the following scenario:
- AF_PACKET socket with enabled HW RX timestamps is created
- AF_XDP socket with enabled zero copy is created
- frame is forwarded to the BPF program, where the timestamp should
still be readable (extracted by igc_xdp_rx_timestamp(), kfunc
behind bpf_xdp_metadata_rx_timestamp())
- the frame got XDP_PASS from BPF program, redirecting to the stack
- AF_PACKET socket receives the frame with HW RX timestamp
Moves the skb timestamp setting from igc_dispatch_skb_zc() to
igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to
igc_construct_skb().
This issue can also be reproduced by running:
# tools/testing/selftests/bpf/xdp_hw_metadata enp1s0
When a frame with the wrong port 9092 (instead of 9091) is used:
# echo -n xdp | nc -u -q1 192.168.10.9 9092
then the RX timestamp is missing and xdp_hw_metadata prints:
skb hwtstamp is not found!
With this fix or when copy mode is used:
# tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0
then RX timestamp is found and xdp_hw_metadata prints:
found skb hwtstamp = 1736509937.852786132
Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in
ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status
encoding. Propagate this logic to the ixgbe_put_rx_buffer().
The commit also relaxed the skb NULL pointer check - caught by Smatch.
Restore this check.
Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields()
so that RX queue is recorded for RSC packets too.
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This reverts commit cd7a38c40b231350a3cd0fd774f4e6bb68c4b411.
When submitting the change above, it was thought that the origin of the
init_data should be a clear choice, from the driver or from DT but not
both.
It turns out some devices, such as qcom-msm8974-lge-nexus5-hammerhead,
relied on the old behaviour to override the init_data provided by the
driver, making it some kind of default if none is provided by the platform.
Using the init_data provided by the driver when it is present broke these
devices so revert the change to fixup the situation and add a comment
to make things a bit more clear
Reported-by: Luca Weiss <luca@lucaweiss.eu>
Closes: https://lore.kernel.org/lkml/5857103.DvuYhMxLoT@lucaweiss.eu
Fixes: cd7a38c40b23 ("regulator: core: do not silently ignore provided init_data")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20250211-regulator-init-data-fixup-v1-1-5ce1c6cff990@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several MeiG Smart modems apparently use the same product id, making the
defines even less useful.
Drop them in favour of using comments consistently to make the id table
slightly less unwieldy.
Cc: stable@vger.kernel.org
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
The correct name for FN990 is FN990A so use it in order to avoid
confusion with FN990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Add the following Telit Cinterion FN990B40 compositions:
0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Commit ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a
"syscon" compatible") broke drivers which call device_node_to_regmap()
on nodes without a "syscon" compatible. Restore the prior behavior for
device_node_to_regmap().
This also makes using device_node_to_regmap() incompatible with
of_syscon_register_regmap() again, so add kerneldoc for
device_node_to_regmap() and syscon_node_to_regmap() to make it clear
how and when each one should be used.
Fixes: ba5095ebbc7a ("mfd: syscon: Allow syscon nodes without a "syscon" compatible")
Reported-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Nishanth Menon <nm@ti.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250124191644.2309790-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The
"Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03"
interfaces respond to AT commands. Add these interfaces.
The product ID the modem uses is shared across multiple modems. Therefore,
add comments to describe which interface is used for which modem.
T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev=05.04
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=4da7ec42
C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/20250124-for-johan-meig-slm828-v2-1-6b4cd3f6344f@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Fix broken config in qcom_param_page_type_exec caused by copy-paste error
from commit 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
In qcom_param_page_type_exec the value needs to be set to
nandc->regs->cfg0 instead of host->cfg0. This wrong configuration caused
the Qcom NANDC driver to malfunction on any device that makes use of it
(IPQ806x, IPQ40xx, IPQ807x, IPQ60xx) with the following error:
[ 0.885369] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xaa
[ 0.885909] nand: Micron NAND 256MiB 1,8V 8-bit
[ 0.892499] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.896823] nand: ECC (step, strength) = (512, 8) does not fit in OOB
[ 0.896836] qcom-nandc 79b0000.nand-controller: No valid ECC settings possible
[ 0.910996] bam-dma-engine 7984000.dma-controller: Cannot free busy channel
[ 0.918070] qcom-nandc: probe of 79b0000.nand-controller failed with error -28
Restore original configuration fix the problem and makes the driver work
again.
Also restore the wrongly dropped cpu_to_le32 to correctly support BE
systems.
Cc: stable@vger.kernel.org
Fixes: 0c08080fd71c ("mtd: rawnand: qcom: use FIELD_PREP and GENMASK")
Tested-by: Robert Marko <robimarko@gmail.com> # IPQ8074 and IPQ6018
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
vmclock_probe() uses an "out:" label to return from the function on
error. This indicates that some cleanup operation is necessary.
However the label does not do anything as all resources are managed
through devres, making the code slightly harder to read.
Remove the label and just return directly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most resources owned by the vmclock device are managed through devres.
Only the miscdev and ptp clock are managed manually.
This makes the code slightly harder to understand than necessary.
Switch them over to devres and remove the now unnecessary drvdata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
vmclock_remove() tries to detect the successful registration of the misc
device based on the value of its minor value.
However that check is incorrect if the misc device registration was not
attempted in the first place.
Always initialize the minor number, so the check works properly.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If vmclock_ptp_register() fails during probing, vmclock_remove() is
called to clean up the ptp clock and misc device.
It uses dev_get_drvdata() to access the vmclock state.
However the driver data is not yet set at this point.
Assign the driver data earlier.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Without the .owner field, the module can be unloaded while /dev/vmclock0
is open, leading to an oops.
Fixes: 205032724226 ("ptp: Add support for the AMZNC10C 'vmclock' device")
Cc: stable@vger.kernel.org
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a missing newline to the format string of the "Couldn't get IRQ
for bank..." error message.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
Fixes: bdb93c03c550 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-02-08
The first patch is by Reyders Morales and fixes a code example in the
CAN ISO15765-2 documentation.
The next patch is contributed by Alexander Hölzl and fixes sending of
J1939 messages with zero data length.
Fedor Pchelkin's patch for the ctucanfd driver adds a missing handling
for an skb allocation error.
Krzysztof Kozlowski contributes a patch for the c_can driver to fix
unbalanced runtime PM disable in error path.
The next patch is by Vincent Mailhol and fixes a NULL pointer
dereference on udev->serial in the etas_es58x driver.
The patch is by Robin van der Gracht and fixes the handling for an skb
allocation error.
* tag 'linux-can-fixes-for-6.14-20250208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
can: c_can: fix unbalanced runtime PM disable in error path
can: ctucanfd: handle skb allocation failure
can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero
Documentation/networking: fix basic node example document ISO 15765-2
====================
Link: https://patch.msgid.link/20250208115120.237274-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
