summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2015-04-01[media] media: s5p-mfc: fix mmap support for 64bit archMarek Szyprowski
TASK_SIZE is depends on the systems architecture (32 or 64 bits) and it should not be used for defining offset boundary for mmaping buffers for CAPTURE and OUTPUT queues. This patch fixes support for MMAP calls on the CAPTURE queue on 64bit architectures (like ARM64). Cc: stable@vger.kernel.org Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-01[media] cx23885: fix querycapHans Verkuil
cap->device_caps wasn't set in cx23885-417.c causing a warning from the v4l2-core. Reported-by: Joseph Jasi <joe.yasi@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.19 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-01[media] sh_veu: v4l2_dev wasn't setHans Verkuil
The v4l2_dev field of struct video_device must be set correctly. This was never done for this driver, so no video nodes were created anymore. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: <stable@vger.kernel.org> # for v3.11 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-31Input: synaptics - fix min-max quirk value for E440Filip Ayazi
Commit 98dc070373 ("Input: synaptics - add quirk for Thinkpad E440") had a typo in ymax, this changes the value to the one reported by touchpad-edge-detector and mentioned in the commit. Signed-off-by: Filip Ayazi <filipayazi@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-03-31net/usb/r8152: add device id for Lenovo TP USB 3.0 EthernetChristian Hesse
This device is sold as 'Lenovo Tinkpad USB 3.0 Ethernet 4X90E51405'. Chipset is RTL8153 and works with r8152. Signed-off-by: Christian Hesse <mail@eworm.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31bonding: Bonding Overriding Configuration logic restored.Anton Nayshtut
Before commit 3900f29021f0bc7fe9815aa32f1a993b7dfdd402 ("bonding: slight optimizztion for bond_slave_override()") the override logic was to send packets with non-zero queue_id through the slave with corresponding queue_id, under two conditions only - if the slave can transmit and it's up. The above mentioned commit changed this logic by introducing an additional condition - whether the bond is active (indirectly, using the slave_can_tx and later - bond_is_active_slave), that prevents the user from implementing more complex policies according to the Documentation/networking/bonding.txt. Signed-off-by: Anton Nayshtut <anton@swortex.com> Signed-off-by: Alexey Bogoslavsky <alexey@swortex.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: fix check for IP addresses in control pathJiri Benc
When an ipvlan interface is down, its addresses are not on the hash list. Fix checks for existence of addresses not to depend on the hash list, walk through all interface addresses instead. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: do not use rcu operations for address listJiri Benc
All accesses to ipvlan->addrs are under rtnl. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: protect against concurrent link removalJiri Benc
Adding and removing to the 'ipvlans' list is already done using _rcu list operations. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ipvlan: fix addr hash list corruptionJiri Benc
When ipvlan interface with IP addresses attached is brought down and then deleted, the assigned addresses are deleted twice from the address hash list, first on the interface down and second on the link deletion. Similarly, when an address is added while the interface is down, it is added second time once the interface is brought up. When the interface is down, the addresses should be kept off the hash list for performance reasons. Ensure this is true, which also fixes the double add problem. To fix the double free, check whether the address is hashed before removing it. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31clocksource/drivers/sun5i: Add clock notifiersMaxime Ripard
The parent clock of the sun5i timer is the AHB clock, which rate might change because of other devices requirements. This is for example the case on the Allwinner A31, where the DMA controller needs a minimum rate higher than the default, that is enforced after the timer driver has probed. Add clock notifiers to make sure we reflect the clock rate changes in the timer rates. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-5-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/sun5i: Refactor the current codeMaxime Ripard
Refactor the code in order to remove the global variables and split the clock source and clock events registration in order to ease the addition of the clock notifiers needed to handle the parent clock rate changes. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-4-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/sun5i: Use of_io_request_and_map()Maxime Ripard
of_iomap doesn't do a request_mem_region() on the memory area defined in the DT it maps. Switch to of_io_request_and_map() to make sure we're the only users. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-3-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/sun5i: Switch to request_irq()Maxime Ripard
The current code uses setup_irq(), while it could perfectly use the much simpler request_irq(). Switch to that. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/arm_arch_timer: Rename 'arch_timer_probed()' to ↵Laurent Pinchart
'arch_timer_needs_probing()' to reflect behaviour The arch_timer_probed() function returns whether the given time doesn't need to be probed. This can be the case when the timer has been probed already, but also when it has no corresponding enabled node in DT. Rename the function to arch_timer_needs_probing() and invert its return value to better reflect the function's purpose and behaviour. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1427796746-373-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fix from Matt Fleming: - Fix integer overflow issue in the DMI SMBIOS 3.0 code when calculating the number of DMI table entries. (Jean Delvare) Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/at91: Fix IO endiannessBen Dooks
Fix the use of __raw IO accessor with the readl/writel_relaxed() versions to allow the code to be used on a system running in big endian mode. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: digetx@gmail.com Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: maxime.ripard@free-electrons.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-7-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/sun4i-timer: Only register a sched_clock on sun4i and sun5iHans de Goede
sun6i and newer have an arm arch timer which is a better sched_clock source then the sun4i-timer, and sched_clock does not have priorities, so do not register the sun4i-timer sched_clock at all on sun6i and newer. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: ben.dooks@codethink.co.uk Cc: digetx@gmail.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: linux-arm-kernel@lists.infradead.org Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-8-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/tegra: Fix IO endiannessDmitry Osipenko
Support big-endian kernel by using endian-aware register access functions. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: ben.dooks@codethink.co.uk Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: linux-arm-kernel@lists.infradead.org Cc: maxime.ripard@free-electrons.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-9-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/dw_apb_timers_of: Fix IO endianness causing time jumpsBen Dooks
The dw_apb_timer_of timer is using __raw_readl() to access the timer register, which is causing issues when the system is running in big endian mode. Fix this by using readl_relaxed() which should account for the endian settings. This fixes issues where the time jumps around in the dmesg output due to returnling __le32 values. For an example, these two console lines show time running backwards: [ 49.882572] CPU1: failed to come online [ 43.282457] Brought up 1 CPUs Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: digetx@gmail.com Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: maxime.ripard@free-electrons.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1427746633-9137-10-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31clocksource/drivers/efm32: Use CLOCK_EVT_FEAT_PERIODIC for defining featuresViresh Kumar
We have used CLOCK_EVT_MODE_PERIODIC instead of CLOCK_EVT_FEAT_PERIODIC while defining features. Fix it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Cc: ben.dooks@codethink.co.uk Cc: digetx@gmail.com Cc: hdegoede@redhat.com Cc: laurent.pinchart+renesas@ideasonboard.com Cc: linux-arm-kernel@lists.infradead.org Cc: maxime.ripard@free-electrons.com Link: http://lkml.kernel.org/r/1427746633-9137-11-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31Merge tag 'v4.0-rc6' into timers/core, before applying new patchesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31enclosure: fix WARN_ON removing an adapter in multi-path devicesJames Bottomley
We have peculiar problems with multi-path and enclosures: physically, we know each bay can only be occupied by a single disk device. However in multi-path, it appears we have many (because each path to the device appears in Linux as a different kernel device). We try to fix this by only having the last seen device show up in the bay. Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users panic and report an oops for. This happens on a few path removal situations and IBM reports seeing it when one of their multi-path adapters is removed. Add a check to enclosure device removal for the existence the sysfs directory containing both the forward and back links so that the remnants (if any) get removed in either direction but no scary warnings are dumped. Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-30Merge branch 'for-4.0-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Nothing exciting. Two patches to update queued trim blacklist" * 'for-4.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Blacklist queued TRIM on Samsung SSD 850 Pro libata: Update Crucial/Micron blacklist
2015-03-30dmaengine: moxart-dma: Fix memory leak when stopping a running transferPeter Ujfalusi
The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: bcm2835-dma: Fix memory leak when stopping a running transferPeter Ujfalusi
The vd->node is removed from the lists when the transfer started so the vchan_get_all_descriptors() will not find it. This results memory leak. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: omap-dma: Fix memory leak when terminating running transferPeter Ujfalusi
In omap_dma_start_desc the vdesc->node is removed from the virt-dma framework managed lists (to be precise from the desc_issued list). If a terminate_all comes before the transfer finishes the omap_desc will not be freed up because it is not in any of the lists and we stopped the DMA channel so the transfer will not going to complete. There is no special sequence for leaking memory when using cyclic (audio) transfer: with every start and stop of a cyclic transfer the driver leaks struct omap_desc worth of memory. Free up the allocated memory directly in omap_dma_terminate_all() since the framework will not going to do that for us. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: edma: fix memory leak when terminating running transfersPetr Kulhavy
If edma_terminate_all() was called while a transfer was running (i.e. after edma_execute() but before edma_callback()) the echan->edesc was not freed. This was due to the fact that a running transfer is on none of the vchan lists: desc_submitted, desc_issued, desc_completed (edma_execute() removes it from the desc_issued list), so the vchan_dma_desc_free_list() called at the end of edma_terminate_all() didn't find it and didn't free it. This bug was found on an AM1808 based hardware (very similar to da850evm, however using the second MMC/SD controller), where intense operations on the SD card wasted the device 128MB RAM within a couple of days. Peter Ujfalusi: The issue is even more severe since it affects cyclic (audio) transfers as well. In this case starting/stopping audio will results memory leak. Signed-off-by: Petr Kulhavy <petr@barix.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <stable@vger.kernel.org> CC: <linux-omap@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30dmaengine: jz4740: Define capabilitiesLars-Peter Clausen
Setup the capabilities of the device/driver, so that users of the DMAengine API can query them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-30Merge tag 'gpio-v4.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull late GPIO fixes from Linus Walleij: "Here are the (hopefully) last GPIO fixes for v4.0. Nothing controversial whatsoever, just fixes: - syscon GPIO fix for Keystone DSP GPIOs - pin number translation fix for ACPI GPIO - a smallish compiler warning fix on the mpc8xxx driver" * tag 'gpio-v4.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: syscon: reduce message level when direction reg offset not in dt gpiolib: translate pin number in GPIO ACPI callbacks gpio: mpc8xxx: remove __initdata annotation for mpc8xxx_gpio_ids[]
2015-03-30drm/i915: Skip allocating shadow batch for 0-length batchesChris Wilson
Since commit 17cabf571e50677d980e9ab2a43c5f11213003ae Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jan 14 11:20:57 2015 +0000 drm/i915: Trim the command parser allocations we may then try to allocate a zero-sized object and attempt to extract its pages. Understandably this fails. Note that the real offender seems to be commit b9ffd80ed659c559152c042e74741f4f60cac691 Author: Brad Volkin <bradley.d.volkin@intel.com> Date: Thu Dec 11 12:13:10 2014 -0800 drm/i915: Use batch length instead of object size in command parser Testcase: igt/gem_exec_nop #ivb,byt,hsw Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [cherry picked from commit 743e78c1d726d875b98ff9689cc77c4d3d5d9ae2 from drm-intel-next because 4.0 seems to be affected by this too, despite that the obvious culprit is definitely not in 4.0. Whatever, if fixes a bug. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-30Merge tag 'iwlwifi-for-kalle-2015-03-30' of ↵Kalle Valo
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix a memory leak: we leaked memory each time the module was loaded.
2015-03-30Merge branch 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few more fixes for 4.0 for radeon. Sorry for the delay, I was a little under the weather this week and time got away from me. * 'drm-fixes-4.0' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: programm the VCE fw BAR as well drm/radeon: always dump the ring content if it's available radeon: Do not directly dereference pointers to BIOS area. drm/radeon/dpm: fix 120hz handling harder
2015-03-29net: fec: setup right value for mdio hold timeUwe Kleine-König
The FEC modules used on i.MX28 and newer have a register to tune the MDIO output hold time that should be at least 10 ns. Up to now this value was not explicitly set and so resulted in less hold time if the fec clock was faster than 100 MHz. This was noticed on an i.MX28 machine that uses an input clock of ~150 Mhz which resulted in unreliable communication with a Marvell switch. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4vf: Fix sparse warningsHariprasad Shenai
Fixes sparse warnings introduced in commit e85c9a7abfa407ed ("cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue Registers") and df64e4d38c904dd3 ("cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addresses") and few old ones sparse warnings: >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: cast removes >> address space of expression >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1006:48: sparse: incorrect type in >> initializer (different address space) >> drivers/net/ethernet/chelsio/cxgb4vf/sge.c:1020:40: sparse: incorrect type in >> argument 1 (different base types) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29Merge branch 'irqchip/urgent-gic' into irqchip/urgentJason Cooper
2015-03-29irqchip: gicv3-its: Use non-cacheable accesses when no shareabilityMarc Zyngier
If the ITS or the redistributors report their shareability as zero, then it is important to make sure they will no generate any cacheable traffic, as this is unlikely to produce the expected result. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-5-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusionMarc Zyngier
The ITS driver sometime mixes up the use of GICR_PROPBASE bitfields for the GICR_PENDBASE register, and GITS_BASER for GICR_CBASE. This does not lead to any observable bug because similar bits are at the same location, but this just make the code even harder to understand... This patch provides the required #defines and fixes the mixup. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix device ID encodingAndre Przywara
When building ITS commands which have the device ID in it, we should mask off the whole upper 32 bits of the first command word before inserting the new value in there. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29irqchip: gicv3-its: Fix encoding of collection's target redistributorMarc Zyngier
With a monolithic GICv3, redistributors are addressed using a linear number, while a distributed implementation uses physical addresses. When encoding a target address into a command, we strip the lower 16 bits, as redistributors are always 64kB aligned. This works perfectly well with a distributed implementation, but has the silly effect of always encoding target 0 in the monolithic case (unless you have more than 64k CPUs, of course). The obvious fix is to shift the linear target number by 16 when computing the target address, so that we don't loose any precious bit. Reported-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1427465705-17126-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-29cxgb4: Disable interrupts and napi before unregistering netdevHariprasad Shenai
Disable interrupts and quiesce rx before unregistering net device to avoid crash while unloading driver when traffic is flowing through. Based on original work by Shameem Khalid <shameem@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29cxgb4: Allocate dynamic mem. for egress and ingress queue mapsHariprasad Shenai
QIDs (egress/ingress) from firmware in FW_*_CMD.alloc command can be anywhere in the range from EQ(IQFLINT)_START to EQ(IQFLINT)_END. For eg, in the first load eqid can be from 100 to 300. In the next load it can be from 301 to 500 (assume eq_start is 100 and eq_end is 1000). The driver was assuming them to always start from EQ(IQFLINT)_START till MAX_EGRQ(INGQ). This was causing stack overflow and subsequent crash. Fixed it by dynamically allocating memory (of qsize (x_END - x_START + 1)) for these structures. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Bjørn Mork <bjorn@mork.no>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-28Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Two clocksource driver fixes, and an idle loop RCU warning fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock() clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
2015-03-28iio: imu: Use iio_trigger_get for indio_dev->trig assignmentDarshana Padmadas
This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.html Signed-off-by: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio: adc: vf610: use ADC clock within specificationStefan Agner
Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Fugang Duan <B38611@freescale.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-28iio/adc/cc10001_adc.c: Fix !HAS_IOMEM buildRichard Weinberger
Fixes: drivers/built-in.o: In function `cc10001_adc_probe': cc10001_adc.c:(.text+0x412e92): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-27drivers/of: Add empty ranges quirk for PA-SemiBenjamin Herrenschmidt
The "sdc" node is missing the ranges property, it needs to be treated as having an empty one otherwise translation fails for its children. Fixes 746c9e9f92dd, "of/base: Fix PowerPC address parsing hack" Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@linaro.org> Cc: Stable <stable@vger.kernel.org> # v3.18+
2015-03-27libata: Blacklist queued TRIM on Samsung SSD 850 ProMartin K. Petersen
Blacklist queued TRIM on this drive for now. Reported-by: Stefan Keller <linux-list@zahlenfresser.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> CC: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-19 14:12:42 +0000