summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-06-10intel_idle: Update arguments of mwait_idle_with_hints()Uros Bizjak
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints() to u32") changed the type of arguments of mwait_idle_with_hints() from unsigned long to u32. Change the type of variables in the call to mwait_idle_with_hints() to unsigned int to follow the change. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Link: https://patch.msgid.link/20250609063528.48715-1-ubizjak@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: resource: Use IRQ override on MACHENIKE 16PWentao Guan
Use ACPI IRQ override on MACHENIKE laptop to make the internal keyboard work. Add a new entry to the irq1_edge_low_force_override structure, similar to the existing ones. Link: https://bbs.deepin.org.cn/zh/post/287628 Signed-off-by: Wentao Guan <guanwentao@uniontech.com> Link: https://patch.msgid.link/20250603122059.1072790-1-guanwentao@uniontech.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: EC: Ignore ECDT tables with an invalid ID stringArmin Wolf
On the MSI Modern 14 C5M the ECDT table contains invalid data: UID : 00000000 GPE Number : 00 /* Invalid, 03 would be correct */ Namepath : "" /* Invalid, "\_SB.PCI0.SBRG.EC" would * be correct */ This slows down the EC access as the wrong GPE event is used for communication. Additionally the ID string is invalid. Ignore such faulty ECDT tables by verifying that the ID string has a valid format. Tested-by: glpnk@proton.me Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://patch.msgid.link/20250529235310.540530-1-W_Armin@gmx.de Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: CPPC: Fix NULL pointer dereference when nosmp is usedYunhui Cui
With nosmp in cmdline, other CPUs are not brought up, leaving their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu() dereferences these NULL pointers, causing panic. Panic backtrace: [ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8 ... [ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4 ... Kernel panic - not syncing: Attempted to kill init! Fixes: 3cc30dd00a58 ("cpufreq: CPPC: Enable fast_switch") Reported-by: Xu Lu <luxu.kernel@bytedance.com> Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com [ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: PAD: Update arguments of mwait_idle_with_hints()Uros Bizjak
Commit a17b37a3f416 ("x86/idle: Change arguments of mwait_idle_with_hints() to u32") changed the type of arguments of mwait_idle_with_hints() from unsigned long to u32. Change the type of variables in the call to mwait_idle_with_hints() to unsigned int to follow the change. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> Link: https://patch.msgid.link/20250609064235.49146-1-ubizjak@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10ACPI: APEI: EINJ: Do not fail einj_init() on faux_device_create() failureDan Williams
CXL has a symbol dependency on einj_core.ko, so if einj_init() fails then cxl_core.ko fails to load. Prior to the faux_device_create() conversion, einj_probe() failures were tracked by the einj_initialized flag without failing einj_init(). Revert to that behavior and always succeed einj_init() given there is no way, and no pressing need, to discern faux device-create vs device-probe failures. This situation arose because CXL knows proper kernel named objects to trigger errors against, but acpi-einj knows how to perform the error injection. The injection mechanism is shared with non-CXL use cases. The result is CXL now has a module dependency on einj-core.ko, and init/probe failures are handled at runtime. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-4-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10driver core: faux: Quiet probe failuresDan Williams
The acpi-einj conversion to faux_device_create() leads to a noisy error message when the error injection facility is disabled. Quiet the error as CXL error injection via ACPI expects the module to stay loaded even if the error injection facility is disabled. This situation arose because CXL knows proper kernel named objects to trigger errors against, but acpi-einj knows how to perform the error injection. The injection mechanism is shared with non-CXL use cases. The result is CXL now has a module dependency on einj-core.ko, and init/probe failures are handled at runtime. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-3-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10driver core: faux: Suppress bind attributesDan Williams
faux_device_create() is almost a suitable candidate to replace platform_driver_probe() if not for the fact that faux_device_create() supports dynamic attach/detach of the driver. Drop the bind attributes with the expectation that simple faux devices can always assume that the device is permanently bound at create, and only unbound at 'destroy'. The acpi-einj driver depends on static bind. Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20250607033228.1475625-2-dan.j.williams@intel.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-10efi: Drop preprocessor directives from zboot.ldsVitaly Kuznetsov
Older versions of `ld` don't seem to support preprocessor directives in linker scripts, e.g. on RHEL9's ld-2.35.2-63.el9 the build fails with: ld:./drivers/firmware/efi/libstub/zboot.lds:32: ignoring invalid character `#' in expression ld:./drivers/firmware/efi/libstub/zboot.lds:33: syntax error We don't seem to need these '#ifdef', no empty .sbat section is created when CONFIG_EFI_SBAT_FILE="": # objdump -h arch/arm64/boot/vmlinuz.efi arch/arm64/boot/vmlinuz.efi: file format pei-aarch64-little Sections: Idx Name Size VMA LMA File off Algn 0 .text 00b94000 0000000000001000 0000000000001000 00001000 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 1 .data 00000200 0000000000b95000 0000000000b95000 00b95000 2**2 CONTENTS, ALLOC, LOAD, DATA Fixes: 0f9a1739dd0e ("efi: zboot specific mechanism for embedding SBAT section") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-06-10e1000: Move cancel_work_sync to avoid deadlockJoe Damato
Previously, e1000_down called cancel_work_sync for the e1000 reset task (via e1000_down_and_stop), which takes RTNL. As reported by users and syzbot, a deadlock is possible in the following scenario: CPU 0: - RTNL is held - e1000_close - e1000_down - cancel_work_sync (cancel / wait for e1000_reset_task()) CPU 1: - process_one_work - e1000_reset_task - take RTNL To remedy this, avoid calling cancel_work_sync from e1000_down (e1000_reset_task does nothing if the device is down anyway). Instead, call cancel_work_sync for e1000_reset_task when the device is being removed. Fixes: e400c7444d84 ("e1000: Hold RTNL when e1000_down can be called") Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/ Reported-by: John <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/ Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10ice/ptp: fix crosstimestamp reportingAnton Nadezhdin
Set use_nsecs=true as timestamp is reported in ns. Lack of this result in smaller timestamp error window which cause error during phc2sys execution on E825 NICs: phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument This problem was introduced in the cited commit which omitted setting use_nsecs to true when converting the ice driver to use convert_base_to_cs(). Testing hints (ethX is PF netdev): phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0 Fixes: d4bea547ebb57 ("ice/ptp: Remove convert_art_to_tsc()") Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10iavf: fix reset_task for early reset eventAhmed Zaki
If a reset event is received from the PF early in the init cycle, the state machine hangs for about 25 seconds. Reproducer: echo 1 > /sys/class/net/$PF0/device/sriov_numvfs ip link set dev $PF0 vf 0 mac $NEW_MAC The log shows: [792.620416] ice 0000:5e:00.0: Enabling 1 VFs [792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002) [792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF [792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized [813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry [818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit. [818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16 Fix it by scheduling the reset task and making the reset task capable of resetting early in the init cycle. Fixes: ef8693eb90ae3 ("i40evf: refactor reset handling") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10i40e: retry VFLR handling if there is ongoing VF resetRobert Malz
When a VFLR interrupt is received during a VF reset initiated from a different source, the VFLR may be not fully handled. This can leave the VF in an undefined state. To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR handling if the reset is not yet complete. This ensures the driver will properly complete the VF reset in such scenarios. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10i40e: return false from i40e_reset_vf if reset is in progressRobert Malz
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a VF reset request, using the return value of i40e_reset_vf as an indicator of whether the reset was successfully triggered. Currently, i40e_reset_vf always returns true, which causes new reset requests to be ignored if a different VF reset is already in progress. This patch updates the return value of i40e_reset_vf to reflect when another VF reset is in progress, allowing the caller to properly use the retry mechanism. Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-06-10pinctrl: sunxi: dt: Consider pin base when calculating bank number from pinChen-Yu Tsai
In prepare_function_table() when the pinctrl function table IRQ entries are generated, the pin bank is calculated from the absolute pin number; however the IRQ bank mux array is indexed from the first pin bank of the controller. For R_PIO controllers, this means the absolute pin bank is way off from the relative pin bank used for array indexing. Correct this by taking into account the pin base of the controller. Fixes: f5e2cd34b12f ("pinctrl: sunxi: allow reading mux values from DT") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/20250607135203.2085226-1-wens@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-06-10ata: pata_cs5536: fix build on 32-bit UMLJohannes Berg
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it doesn't indicate building on real X86 machines. There's no MSR on UML though, so add a check for CONFIG_X86. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20250606090110.15784-2-johannes@sipsolutions.net Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-10drm/meson: fix more rounding issues with 59.94Hz modesMartin Blumenstingl
Commit 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types") attempts to resolve video playback using 59.94Hz. using YUV420 by changing the clock calculation to use Hz instead of kHz (thus yielding more precision). The basic calculation itself is correct, however the comparisions in meson_vclk_vic_supported_freq() and meson_vclk_setup() don't work anymore for 59.94Hz modes (using the freq * 1000 / 1001 logic). For example, drm/edid specifies a 593407kHz clock for 3840x2160@59.94Hz. With the mentioend commit we convert this to Hz. Then meson_vclk tries to find a matchig "params" entry (as the clock setup code currently only supports specific frequencies) by taking the venc_freq from the params and calculating the "alt frequency" (used for the 59.94Hz modes) from it, which is: (594000000Hz * 1000) / 1001 = 593406593Hz Similar calculation is applied to the phy_freq (TMDS clock), which is 10 times the pixel clock. Implement a new meson_vclk_freqs_are_matching_param() function whose purpose is to compare if the requested and calculated frequencies. They may not match exactly (for the reasons mentioned above). Allow the clocks to deviate slightly to make the 59.94Hz modes again. Fixes: 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250609202751.962208-1-martin.blumenstingl@googlemail.com
2025-06-10drm/meson: use vclk_freq instead of pixel_freq in debug printMartin Blumenstingl
meson_vclk_vic_supported_freq() has a debug print which includes the pixel freq. However, within the whole function the pixel freq is irrelevant, other than checking the end of the params array. Switch to printing the vclk_freq which is being compared / matched against the inputs to the function to avoid confusion when analyzing error reports from users. Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250606221031.3419353-1-martin.blumenstingl@googlemail.com
2025-06-10drm/meson: fix debug log statement when setting the HDMI clocksMartin Blumenstingl
The "phy" and "vclk" frequency labels were swapped, making it more difficult to debug driver errors. Swap the label order to make them match with the actual frequencies printed to correct this. Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250606203729.3311592-1-martin.blumenstingl@googlemail.com
2025-06-10ata: libata-acpi: Do not assume 40 wire cable if no devices are enabledTasos Sahanidis
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices have not yet been enabled by the first time ata_acpi_cbl_80wire() is called. This means that the ata_for_each_dev loop is never entered, and a 40 wire cable is assumed. The VIA controller on this board does not report the cable in the PCI config space, thus having to fall back to ACPI even though no SATA bridge is present. The _GTM values are correctly reported by the firmware through ACPI, which has already set up faster transfer modes, but due to the above the controller is forced down to a maximum of UDMA/33. Resolve this by modifying ata_acpi_cbl_80wire() to directly return the cable type. First, an unknown cable is assumed which preserves the mode set by the firmware, and then on subsequent calls when the devices have been enabled, an 80 wire cable is correctly detected. Since the function now directly returns the cable type, it is renamed to ata_acpi_cbl_pata_type(). Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085945.1399466-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-10ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330Tasos Sahanidis
The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on WinXP, although it requires more attempts to cause it. The hang in that case is also resolved by forcing PIO. It doesn't appear that VIA has produced any drivers for that OS, thus no known workaround exists. HDDs attached to the controller do not suffer from any DMA issues. Cc: stable@vger.kernel.org Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916677 Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/20250519085508.1398701-1-tasos@tasossah.com Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-06-10drm/vc4: fix infinite EPROBE_DEFER loopGabriel Dalimonte
`vc4_hdmi_audio_init` calls `devm_snd_dmaengine_pcm_register` which may return EPROBE_DEFER. Calling `drm_connector_hdmi_audio_init` adds a child device. The driver model docs[1] state that adding a child device prior to returning EPROBE_DEFER may result in an infinite loop. [1] https://www.kernel.org/doc/html/v6.14/driver-api/driver-model/driver.html Fixes: 9640f1437a88 ("drm/vc4: hdmi: switch to using generic HDMI Codec infrastructure") Signed-off-by: Gabriel Dalimonte <gabriel.dalimonte@gmail.com> Link: https://lore.kernel.org/r/20250601-vc4-audio-inf-probe-v2-1-9ad43c7b6147@gmail.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-10firmware: exynos-acpm: fix timeouts on xfers handlingTudor Ambarus
The mailbox framework has a single inflight request at a time. If a request is sent while another is still active, it will be queued to the mailbox core ring buffer. ACPM protocol did not serialize the calls to the mailbox subsystem so we could start the timeout ticks in parallel for multiple requests, while just one was being inflight. Consider a hypothetical case where the xfer timeout is 100ms and an ACPM transaction takes 90ms: | 0ms: Message #0 is queued in mailbox layer and sent out, then sits | at acpm_dequeue_by_polling() with a timeout of 100ms | 1ms: Message #1 is queued in mailbox layer but not sent out yet. | Since send_message() doesn't block, it also sits at | acpm_dequeue_by_polling() with a timeout of 100ms | ... | 90ms: Message #0 is completed, txdone is called and message #1 is sent | 101ms: Message #1 times out since the count started at 1ms. Even though | it has only been inflight for 11ms. Fix the problem by moving mbox_send_message() and mbox_client_txdone() immediately after the message has been written to the TX queue and while still keeping the ACPM TX queue lock. We thus tie together the TX write with the doorbell ring and mark the TX as done after the doorbell has been rung. This guarantees that the doorbell has been rang before starting the timeout ticks. We should also see some performance improvement as we no longer wait to receive a response before ringing the doorbell for the next request, so the ACPM firmware shall be able to drain faster the TX queue. Another benefit is that requests are no longer able to ring the doorbell one for the other, so it eases debugging. Finally, the mailbox software queue will always contain a single doorbell request due to the serialization done at the ACPM TX queue level. Protocols like ACPM, that handle their own hardware queues need a passthrough mailbox API, where they are able to just ring the doorbell or flip a bit directly into the mailbox controller. The mailbox software queue mechanism, the locking done into the mailbox core is not really needed, so hopefully this lays the foundation for a passthrough mailbox API. Reported-by: André Draszik <andre.draszik@linaro.org> Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20250606-acpm-timeout-v2-1-306b1aa07a6c@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-06-10platform/x86: dell_rbu: Bump versionStuart Hayes
Bump the module version. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-6-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Stop overwriting data bufferStuart Hayes
The dell_rbu driver will use memset() to clear the data held by each packet when it is no longer needed (when the driver is unloaded, the packet size is changed, etc). The amount of memory that is cleared (before this patch) is the normal packet size. However, the last packet in the list may be smaller. Fix this to only clear the memory actually used by each packet, to prevent it from writing past the end of data buffer. Because the packet data buffers are allocated with __get_free_pages() (in page-sized increments), this bug could only result in a buffer being overwritten when a packet size larger than one page is used. The only user of the dell_rbu module should be the Dell BIOS update program, which uses a packet size of 4096, so no issues should be seen without the patch, it just blocks the possiblity. Fixes: 6c54c28e69f2 ("[PATCH] dell_rbu: new Dell BIOS update driver") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-5-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix list usageStuart Hayes
Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. Fixes: d19f359fbdc6 ("platform/x86: dell_rbu: don't open code list_for_each_entry*()") Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-3-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86: dell_rbu: Fix lock context warningStuart Hayes
Fix a sparse lock context warning. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Link: https://lore.kernel.org/r/20250609184659.7210-2-stuart.w.hayes@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc()Mario Limonciello
commit 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") adjusted the error handling flow to use a ladder but this isn't actually needed because work is only scheduled in amd_pmf_start_policy_engine() and with device managed cleanups pointers for allocations don't need to be freed. Adjust the error flow to a single call to amd_pmf_deinit_smart_pc() for the cases that need to clean up. Cc: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-4-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-4-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twiceMario Limonciello
If any of the tee init fails, pass up the errors and clear the tee_ctx pointer. This will prevent cleaning up multiple times. Fixes: ac052d8c08f9d ("platform/x86/amd/pmf: Add PMF TEE interface") Suggested-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250512211154.2510397-3-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-3-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-10platform/x86/amd: pmf: Use device managed allocationsMario Limonciello
If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. Fixes: 5b1122fc4995f ("platform/x86/amd/pmf: fix cleanup in amd_pmf_init_smart_pc()") Link: https://lore.kernel.org/r/20250512211154.2510397-2-superm1@kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20250522003457.1516679-2-superm1@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-09scsi: error: alua: I/O errors for ALUA state transitionsRajashekhar M A
When a host is configured with a few LUNs and I/O is running, injecting FC faults repeatedly leads to path recovery problems. The LUNs have 4 paths each and 3 of them come back active after say an FC fault which makes 2 of the paths go down, instead of all 4. This happens after several iterations of continuous FC faults. Reason here is that we're returning an I/O error whenever we're encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE TRANSITION) instead of retrying. Signed-off-by: Rajashekhar M A <rajs@netapp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250606135924.27397-1-hare@kernel.org Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: storvsc: Increase the timeouts to storvsc_timeoutDexuan Cui
Currently storvsc_timeout is only used in storvsc_sdev_configure(), and 5s and 10s are used elsewhere. It turns out that rarely the 5s is not enough on Azure, so let's use storvsc_timeout everywhere. In case a timeout happens and storvsc_channel_init() returns an error, close the VMBus channel so that any host-to-guest messages in the channel's ringbuffer, which might come late, can be safely ignored. Add a "const" to storvsc_timeout. Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/1749243459-10419-1-git-send-email-decui@microsoft.com Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm/adreno: Check for recognized GPU before bindRob Clark
If we have a newer dtb than kernel, we could end up in a situation where the GPU device is present in the dtb, but not in the drivers device table. We don't want this to prevent the display from probing. So check that we recognize the GPU before adding the GPU component. v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657701/
2025-06-09Merge tag 'for-net-2025-06-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - MGMT: Fix UAF on mgmt_remove_adv_monitor_complete - MGMT: Protect mgmt_pending list with its own lock - hci_core: fix list_for_each_entry_rcu usage - btintel_pcie: Increase the tx and rx descriptor count - btintel_pcie: Reduce driver buffer posting to prevent race condition - btintel_pcie: Fix driver not posting maximum rx buffers * tag 'for-net-2025-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: MGMT: Protect mgmt_pending list with its own lock Bluetooth: MGMT: Fix UAF on mgmt_remove_adv_monitor_complete Bluetooth: btintel_pcie: Reduce driver buffer posting to prevent race condition Bluetooth: btintel_pcie: Increase the tx and rx descriptor count Bluetooth: btintel_pcie: Fix driver not posting maximum rx buffers Bluetooth: hci_core: fix list_for_each_entry_rcu usage ==================== Link: https://patch.msgid.link/20250605191136.904411-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-09drm/msm/adreno: Pass device_node to find_chipid()Rob Clark
We are going to want to re-use this before the component is bound, when we don't yet have the device pointer (but we do have the of node). v2: use %pOF Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657705/
2025-06-09drm/msm: Rename add_components_mdp()Rob Clark
To better match add_gpu_components(). Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/657700/
2025-06-09drivers: gpu: drm: msm: registers: improve reproducibilityRyan Eatmon
The files generated by gen_header.py capture the source path to the input files and the date. While that can be informative, it varies based on where and when the kernel was built as the full path is captured. Since all of the files that this tool is run on is under the drivers directory, this modifies the application to strip all of the path before drivers. Additionally it prints <stripped> instead of the date. Signed-off-by: Ryan Eatmon <reatmon@ti.com> Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com> Signed-off-by: Viswanath Kraleti <viswanath.kraleti@oss.qualcomm.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/655599/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm/a7xx: Call CP_RESET_CONTEXT_STATEConnor Abbott
Calling this packet is necessary when we switch contexts because there are various pieces of state used by userspace to synchronize between BR and BV that are persistent across submits and we need to make sure that they are in a "safe" state when switching contexts. Otherwise a userspace submission in one context could cause another context to function incorrectly and hang, effectively a denial of service (although without leaking data). This was missed during initial a7xx bringup. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654924/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix CP_RESET_CONTEXT_STATE bitfield namesConnor Abbott
Based on kgsl. Fixes: af66706accdf ("drm/msm/a6xx: Add skeleton A7xx support") Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654922/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09Merge branch '6.16/scsi-queue' into 6.16/scsi-fixesMartin K. Petersen
Pull in remaining fixes from queue branch. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: s390: zfcp: Ensure synchronous unit_addPeter Oberparleiter
Improve the usability of the unit_add sysfs attribute by ensuring that the associated FCP LUN scan processing is completed synchronously. This enables configuration tooling to consistently determine the end of the scan process to allow for serialization of follow-on actions. While the scan process associated with unit_add typically completes synchronously, it is deferred to an asynchronous background process if unit_add is used before initial remote port scanning has completed. This occurs when unit_add is used immediately after setting the associated FCP device online. To ensure synchronous unit_add processing, wait for remote port scanning to complete before initiating the FCP LUN scan. Cc: stable@vger.kernel.org Reviewed-by: M Nikhil <nikh1092@linux.ibm.com> Reviewed-by: Nihar Panda <niharp@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Nihar Panda <niharp@linux.ibm.com> Link: https://lore.kernel.org/r/20250603182252.2287285-2-niharp@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: iscsi: Fix incorrect error path labels for flashnode operationsAlok Tiwari
Correct the error handling goto labels used when host lookup fails in various flashnode-related event handlers: - iscsi_new_flashnode() - iscsi_del_flashnode() - iscsi_login_flashnode() - iscsi_logout_flashnode() - iscsi_logout_flashnode_sid() scsi_host_put() is not required when shost is NULL, so jumping to the correct label avoids unnecessary operations. These functions previously jumped to the wrong goto label (put_host), which did not match the intended cleanup logic. Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to ensure proper error handling. Also remove the unused put_host label under iscsi_new_flashnode() as it is no longer needed. No functional changes beyond accurate error path correction. Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09scsi: mvsas: Fix typos in per-phy comments and SAS cmd port registersAnkit Chauhan
Spelling fixes: Deocder --> Decoder Memroy --> Memory This is a non-functional change aimed at improving code clarity. Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com> Link: https://lore.kernel.org/r/20250528110604.59528-1-ankitchauhan2065@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-06-09drm/msm: Temporarily disable stall-on-fault after a page faultConnor Abbott
When things go wrong, the GPU is capable of quickly generating millions of faulting translation requests per second. When that happens, in the stall-on-fault model each access will stall until it wins the race to signal the fault and then the RESUME register is written. This slows processing page faults to a crawl as the GPU can generate faults much faster than the CPU can acknowledge them. It also means that all available resources in the SMMU are saturated waiting for the stalled transactions, so that other transactions such as transactions generated by the GMU, which shares translation resources with the GPU, cannot proceed. This causes a GMU watchdog timeout, which leads to a failed reset because GX cannot collapse when there is a transaction pending and a permanently hung GPU. On older platforms with qcom,smmu-v2, it seems that when one transaction is stalled subsequent faulting transactions are terminated, which avoids this problem, but the MMU-500 follows the spec here. To work around these problems, disable stall-on-fault as soon as we get a page fault until a cooldown period after pagefaults stop. This allows the GMU some guaranteed time to continue working. We only use stall-on-fault to halt the GPU while we collect a devcoredump and we always terminate the transaction afterward, so it's fine to miss some subsequent page faults. We also keep it disabled so long as the current devcoredump hasn't been deleted, because in that case we likely won't capture another one if there's a fault. After this commit HFI messages still occasionally time out, because the crashdump handler doesn't run fast enough to let the GMU resume, but the driver seems to recover from it. This will probably go away after the HFI timeout is increased. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654891/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Delete resume_translation()Connor Abbott
Unused since the previous commit. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654890/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Don't use a worker to capture fault devcoredumpConnor Abbott
Now that we use a threaded IRQ, it should be safe to do this in the fault handler. We can also remove fault_info from struct msm_gpu and just pass it directly. Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/654889/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix another leak in the submit error pathRob Clark
put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09drm/msm: Fix a fence leak in submit error pathRob Clark
In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
2025-06-09SPI: omap2-mcspi: Fix SPI CS behaviour aroundMark Brown
Merge series from Félix Piédallu <felix.piedallu@non.se.com>: These patches fix the behaviour of the SPI Chip Select of the OMAP2 MCSPI driver used on TI SoCs. The omap2-mcspi driver supports the use of multi mode (multichannel in TI documentation). In this mode, the CS is asserted and deasserted by the hardware. The multi mode is disabled for messages when cs_change=0 for all transfers (e.g when CS is kept asserted between transfers of a same message). The multi mode also needs to be disabled for messages when cs_change=1 on the last transfer (e.g when CS is kept asserted after the WHOLE message), and the message right after. Currently, that is not the case and it CS is deasserted by hardware when it shouldn't. This breaks peripheral drivers that send multiple messages with the CS asserted in between. Patch 1 ensures that multi mode is disabled when cs_change=1 on the last transfer of the message. Patch 2 ensures that multi mode is disable on a message following one with cs_change=1 on the last transfer. This is the case for the TPM TIS SPI driver that uses this logic for flow control purposes. Tested on an AM6442 platform with a TPM ST33HTPH2X32AHE4.
2025-06-09cxl: fix return value in cxlctl_validate_set_features()Dan Carpenter
The cxlctl_validate_set_features() function is type bool. It's supposed to return true for valid requests and false for invalid. However, this error path returns ERR_PTR(-EINVAL) which is true when it was intended to return false. The incorrect return will result in kernel failing to prevent a incorrect op_size passed in from userspace to be detected. [ dj: Add user impact to commit log ] Fixes: f76e0bbc8bc3 ("cxl: Update prototype of function get_support_feature_info()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://patch.msgid.link/aDbFPSCujpJLY1if@stanley.mountain Signed-off-by: Dave Jiang <dave.jiang@intel.com>
generated by cgit (git 2.34.1) at 2025-07-16 04:53:52 +0000