| Age | Commit message (Collapse) | Author |
|---|
|
Instead of implementing eytzinger0_find_gt() in terms of
eytzinger0_find_le() and adjusting the result, implement it directly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an eytzinger0_find_gt() self test similar to eytzinger0_find_le().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Replace the over-complicated implementation of eytzinger0_find_le() by
an equivalent, simpler version.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
eytzinger0_find_le() is also easy to concert to 1-based eytzinger (but
see the next commit).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rename eytzinger0_find_test_val() to eytzinger0_find_test_le() and add a
new eytzinger0_find_test_val() wrapper that calls it.
We have already established that the array is sorted in eytzinger order,
so we can use the eytzinger iterator functions and check the boundary
conditions to verify the result of eytzinger0_find_le().
Only scan the entire array if we get an incorrect result. When we need
to scan, use eytzinger0_for_each_prev() so that we'll stop at the
highest matching element in the array in case there are duplicates;
going through the array linearly wouldn't give us that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add an eytzinger0_for_each_prev() macro for iterating through an
eytzinger array in reverse.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In eytzinger0_find_test(), remember the smallest element seen so far
instead of comparing adjacent array elements.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In eytzinger[01]_test(), make sure that eytzinger[01]_for_each()
iterates over all array elements.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Fix an obvious typo in cmp_u16().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
pr_info() format strings need to be newline terminated.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The iterator variable of eytzinger0_for_each() loops has been changed to
be locally scoped at some point, so remove variables defined outside the
loop that are now unused. In addition and for clarity, use a different
variable inside those loops where an outside variable would be shadowed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When EYTZINGER_DEBUG is defined, <linux/bug.h> needs to be included.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Use an eytzinger0_for_each() loop here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Necessary for adding backpointers for cached pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We have other metadata IO types covered, this was missing.
Note: this includes the time until completion, i.e. including parent
pointer update.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
impossible
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for stripe backpointers: this path previously would get very
confused at being asked to process (remove redundant replicas) stripes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Increase journal pipelining.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since we're increasing the number of 'struct journal_bufs', we don't
want them all permanently holding onto buffers for the journal data -
that'd be 16 * 2MB = 32MB, or potentially more.
Add a single-element mempool (open coded, since buffer size varies),
this also means we won't be hitting the memory allocator every time we
open and close a journal entry/buffer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is a small optimization, reducing the number of cachelines we touch
in the fast path - and it's also necessary for the next patch that
increases JOURNAL_BUF_NR.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More dead code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This code needs quite a bit of work: we don't want to be walking all
metadata in the filesystem, we should just be walking backpointers, and
it should be switched to a data ioctl that can report progress via a
file descriptor, not the system console.
But that'll take more work - before we can safely walk only backpointers
we need to change device add to not reuse device indexes, since with
that change accounting being wrong introduces the possibility of
removing a device that still has pointers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
the backpointers code has progress indicators; these aren't great, since
they print to the dmesg console and we much prefer to have progress
indicators reporting to a specific userspace program so they're not
spamming the system console.
But not all codepaths that need progress indicators support that yet,
and we don't want users to think "this is hung".
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
restarts
we're starting to use error messages with paths in fsck_errors(), where
we do not want nested transaction restart handling, so let's prepare for
that.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
number
We want all error messages converted to print paths, not just inode
numbers - users want this information, and it speeds up debugging too.
Auditing and converting all error messages is going to be a big project,
so for the moment we're just doing this incrementally.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Iterating over backpointers on a specific device is potentially much
cheaper than walking all filesystem data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Reorganize counters a bit, grouping related counters together.
New counters:
- io_read_inline
- io_read_hole
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When ancestor is less than IS_ANCESTOR_BITMAP, we would get an incorrect
result.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new data op to walk all data and metadata in a filesystem,
checking if it can be read successfully, and on error repairing from
another copy if possible.
- New helper: bch2_dev_idx_is_online(), so that we can bail out and
report to userspace when we're unable to scrub because the device is
offline
- data_update_opts, which controls the data move path, now understands
scrub: data is only read, not written. The read path is responsible
for rewriting on read error, as with other reads.
- scrub_pred skips data extents that don't have checksums
- bch_ioctl_data has a new scrub member, which has a data_types field
for data types to check - i.e. all data types, or only metadata.
- Add new entries to bch_move_stats so that we can report numbers for
corrected and uncorrected errors
- Add a new enum to bch_ioctl_data_event for explicitly reporting
completion and return code (i.e. device offline)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a function for scrubbing btree nodes - reading them in, and kicking
off a rewrite if there's an error.
The btree_node_read_done() checks have to be duplicated because we're
not using a pointer to a struct btree - the btree node might already be
in cache, and we need to check a specific replica, which might not be
the one we previously read from.
This will be used in the next patch implementing high-level scrub.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
To be used for scrub, where we want the read to come from a specific
device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Kill most of the separate logic for btree nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a more general version of bch2_evacuate_bucket - to be used for
scrub.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a new helper for rewriting a btree node given a just the key, not a
pointer to the node itself.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We may not need to pull in a btree node when walking backpointers -
don't do so unnecessarily when using backpointer_get_key().
It'll still fall back to backpointer_get_node() in a few situations,
including btree roots (where an iterator can't point at just the key),
and races due to the interior update path not having deleted a
backpointer to an old node yet.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Rework the read path so that BCH_READ_NODECODE reads now also self-heal
after a read error and a successful retry - prerequisite for scrub.
- __bch2_read_endio() now handles a read that's both BCH_READ_NODECODE
and a bounce.
Normally, we don't want a BCH_READ_NODECODE read to ever allocate a
split bch_read_bio: we want to maintain the relationship between the
bch_read_bio and the data_update it's embedded in.
But correcting read errors requires allocating a split/bounce rbio
that's embedded in a promote_op. We do still have a 1-1 relationship,
i.e. we only allocate a single split/bounce if it's a
BCH_READ_NODECODE, so things hopefully don't get too crazy.
- __bch2_read_extent() now is allowed to allocate the promote_op for
rewriting after a failed read, even if it's BCH_READ_NODECODE.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we don't want to block completion of the read - starting a promote calls
into the write path, which will block.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a data update doesn't want to block on allocations (promotes, self
healing on read error) - check if the allocation would fail before
kicking off the data update and calling into the write path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Initialize the write op first, so that in the next patch we can check if
the allocator would block (for BCH_WRITE_alloc_nowait ops) and bail out
before taking nocow locks/dev refs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a drive is failing and we're moving data off of it, we can't
necessairly depend on capacity/disk reservation calculations to avoid
deadlocking/blocking on the allocator.
And, we don't want to queue up infinite self healing moves anyways.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Promotes, like most other internal moves, should only go to the
specified target and not fall back to allocating from the full
filesystem.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that data_update embeds bch_read_bio, BCH_READ_NODECODE means that
the read is embedded in a a data_update - and we can check in the retry
path if the extent has changed and bail out.
This likely fixes some subtle bugs with read errors and data moves.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Prep work for improving bch2_data_update_init().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Move more initialization to rbio_init(), to assist in further cleanups.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
