| Age | Commit message (Collapse) | Author |
|---|
|
Currently we have this ugly back and forth with the btree writeback
where we find the folio, find the eb associated with that folio, and
then attempt to writeback. This results in two different paths for
subpage ebs and >= page size ebs.
Clean this up by adding our own infrastructure around looking up tagged
ebs and writing the ebs out directly. This allows us to unify the
subpage and >= pagesize IO paths, resulting in a much cleaner writeback
path for extent buffers.
I ran this through fsperf on a VM with 8 CPUs and 16GiB of RAM. I used
smallfiles100k, but reduced the files to 1k to make it run faster, the
results are as follows, with the statistically significant improvements
marked with *, there were no regressions. fsperf was run with -n 10 for
both runs, so the baseline is the average 10 runs and the test is the
average of 10 runs.
smallfiles100k results
metric baseline current stdev diff
================================================================================
avg_commit_ms 68.58 58.44 3.35 -14.79% *
commits 270.60 254.70 16.24 -5.88%
dev_read_iops 48 48 0 0.00%
dev_read_kbytes 1044 1044 0 0.00%
dev_write_iops 866117.90 850028.10 14292.20 -1.86%
dev_write_kbytes 10939976.40 10605701.20 351330.32 -3.06%
elapsed 49.30 33 1.64 -33.06% *
end_state_mount_ns 41251498.80 35773220.70 2531205.32 -13.28% *
end_state_umount_ns 1.90e+09 1.50e+09 14186226.85 -21.38% *
max_commit_ms 139 111.60 9.72 -19.71% *
sys_cpu 4.90 3.86 0.88 -21.29%
write_bw_bytes 42935768.20 64318451.10 1609415.05 49.80% *
write_clat_ns_mean 366431.69 243202.60 14161.98 -33.63% *
write_clat_ns_p50 49203.20 20992 264.40 -57.34% *
write_clat_ns_p99 827392 653721.60 65904.74 -20.99% *
write_io_kbytes 2035940 2035940 0 0.00%
write_iops 10482.37 15702.75 392.92 49.80% *
write_lat_ns_max 1.01e+08 90516129 3910102.06 -10.29% *
write_lat_ns_mean 366556.19 243308.48 14154.51 -33.62% *
As you can see we get about a 33% decrease runtime, with a 50%
throughput increase, which is pretty significant.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The unsigned type is a recommended practice (CWE-190, CWE-194) for bit
shifts to avoid problems with potential unwanted sign extensions.
Although there are no such cases in btrfs codebase, follow the
recommendation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is set after inserting the eb to the buffer tree and cleared
on it's removal. It was added in commit 34b41acec1ccc0 ("Btrfs: use a
bit to track if we're in the radix tree") and wanted to make use of it,
faa2dbf004e89e ("Btrfs: add sanity tests for new qgroup accounting
code"). Both are 10+ years old, we can remove the flag.
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is no longer being used. It was added by commit a826d6dcb32d
("Btrfs: check items for correctness as we search") but it's no longer
being used after commit f26c92386028 ("btrfs: remove reada
infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag is no longer being used. It was added by commit ab0fff03055d
("btrfs: add READAHEAD extent buffer flag") and used in commits:
79fb65a1f6d9 ("Btrfs: don't call readahead hook until we have read the entire eb")
78e62c02abb9 ("btrfs: Remove extent_io_ops::readpage_io_failed_hook")
371cdc0700c7 ("btrfs: introduce subpage metadata validation check")
Finally all the code using it was removed by commit f26c92386028 ("btrfs: remove
reada infrastructure").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This flag was added by commit 656f30dba7ab ("Btrfs: be aware of btree
inode write errors to avoid fs corruption") but it stopped being used
after commit 046b562b20a5 ("btrfs: use a separate end_io handler for
read_extent_buffer").
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The functions qualify for the pure attribute as they always return the
same value for the same argument (in the given scope). This allows to
optimize the calls and cache the value.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After previous patch removing nodesize from parameters,
__alloc_dummy_extent_buffer() and alloc_dummy_extent_buffer() are
identical so we can drop one.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers pass a valid fs_info so we can read the nodesize from that
instead of passing it as parameter.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are only 2 WAIT_* values left for wait parameter, we can encode
this to the function name if the waiting functionality is split.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Last use was in the readahead code that got removed by f26c9238602856
("btrfs: remove reada infrastructure").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The simple helper can be inlined, no need for the separate function.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function set_page_extent_mapped() is now a simple wrapper so use the
folio helper.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. And page_to_inode() can be replaced with folio_to_inode() now.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The old page API is being gradually replaced and converted to use folio
to improve code readability and avoid repeated conversion between page
and folio. Now clear_page_extent_mapped() can deal with a folio
directly, so change its name to clear_folio_extent_mapped().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This mostly uses folios, convert it to take a folio instead and update
the callers to pass in the folio.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of taking the locked page, take the locked folio so we can pass
that into __process_folios_contig.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing in a page for locked_page, pass in the folio instead.
We only use the folio itself to validate some range assumptions, and
then pass it into other functions.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function is only used inside inode.c by compress_file_range(),
so move it to inode.c and unexport it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is only one caller utilizing the @extra_gfp parameter,
alloc_eb_folio_array(). And in that case the extra_gfp is only assigned
to __GFP_NOFAIL.
Rename the @extra_gfp parameter to @nofail to indicate that.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_alloc_folio_array() is only utilized in
btrfs_submit_compressed_read() and no other location, and the only
caller is not utilizing the @extra_gfp parameter.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When qgroups are enabled, during data reservation, we allocate the
ulist_nodes that track the exact reserved extents with GFP_ATOMIC
unconditionally. This is unnecessary, and we can follow the model
already employed by the struct extent_state we preallocate in the non
qgroups case, which should reduce the risk of allocation failures with
GFP_ATOMIC.
Add a prealloc node to struct ulist which ulist_add will grab when it is
present, and try to allocate it before taking the tree lock while we can
still take advantage of a less strict gfp mask. The lifetime of that
node belongs to the new prealloc field, until it is used, at which point
it belongs to the ulist linked list.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We can add const to many parameters, this is for clarity and minor
addition to safety. There are some minor effects, in the assembly
code and .ko measured on release config. This patch does not cover all
possible conversions.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the core of the fiemap code lives in extent_io.c, which does
not make any sense because it's not related to extent IO at all (and it
was not as well before the big rewrite of fiemap I did some time ago).
The entry point for fiemap, btrfs_fiemap(), lives in inode.c since it's
an inode operation.
Since there's a significant amount of fiemap code, move all of it into a
dedicated file, including its entry point inode.c:btrfs_fiemap().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the lock_extent tightly coupled with
extent_clear_unlock_delalloc we can add a cached state to
extent_clear_unlock_delalloc and benefit from skipping the extra lookup
when we're doing cow.
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently try_release_extent_mapping() as an int return type, but we
use it as a boolean. Its only caller, the release folio callback, also
returns a boolean which corresponds to try_release_extent_mapping()'s
return value. So change its return value type to bool as well as its
helper try_release_extent_state().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The new helper will do the same thing as btrfs_alloc_page_array(), but
with folios.
One extra difference is, there is no extra helper for bulk allocation,
thus it may not be as efficient as the page version.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in having a static writepages callback in inode.c that
does nothing besides calling extent_writepages from extent_io.c.
So just remove the callback at inode.c and rename extent_writepages()
to btrfs_writepages().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in having a static readahead callback in inode.c that
does nothing besides calling extent_readahead() from extent_io.c.
So just remove the callback at inode.c and rename extent_readahead()
to btrfs_readahead().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Do a cleanup in more headers:
- add forward declarations for types referenced by pointers
- add includes when types need them
This fixes potential compilation problems if the headers are reordered
or the missing includes are not provided indirectly.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Turn set_page_extent_mapped() into a wrapper around this version.
Saves a call to compound_head() for callers who already have a folio
and removes a couple of users of page->mapping.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need to do a forward declaration of struct extent_map_tree at
extent_io.h, as there are no function prototypes, inline functions or data
structures that refer to struct extent_map_tree.
So remove that forward declaration, which is not needed since commit
477a30ba5f8d ("btrfs: Sink extent_tree arguments in
try_release_extent_mapping").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After the conversion to folio interfaces (but without the patch to
enable larger folio allocation), there is an LTP report about observable
performance drop on metadata heavy operations.
https://lore.kernel.org/linux-btrfs/202312221750.571925bd-oliver.sang@intel.com/
This drop is caused by the extra code of calculating the
folio_size()/folio_shift(), instead of the old hard coded
PAGE_SIZE/PAGE_SHIFT.
To slightly reduce the overhead, just cache both folio_size and
folio_shift in extent_buffer.
The two new members (u32 folio_size and u8 folio_shift) are stored
inside the holes of extent_buffer. folio_size is shared with len, which
is reduced to u32. The size of eb does not change.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These two functions are still using the old page based code, which is
not going to handle larger folios at all.
The migration itself is going to involve the following changes:
- PAGE_SIZE -> folio_size()
- PAGE_SHIFT -> folio_shift()
- get_eb_page_index() -> get_eb_folio_index()
- get_eb_offset_in_page() -> get_eb_offset_in_folio()
And since we're going to support larger folios, although above straight
conversion is good enough, this patch would add extra comments in the
involved functions to explain why the same single line code can now
cover 3 cases:
- folio_size == PAGE_SIZE, sectorsize == PAGE_SIZE, nodesize >= PAGE_SIZE
The common, non-subpage case with per-page folio.
- folio_size > PAGE_SIZE, sectorsize == PAGE_SIZE, nodesize >= PAGE_SIZE
The incoming larger folio, non-subpage case.
- folio_size == PAGE_SIZE, sectorsize < PAGE_SIZE, nodesize < PAGE_SIZE
The existing subpage case, we won't larger folio anyway.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Although we have migrated extent_buffer::pages[] to folios[], we're
still mostly using the folio_page() help to grab the page.
This patch would do the following cleanups for metadata:
- Introduce num_extent_folios() helper
This is to replace most num_extent_pages() callers.
- Use num_extent_folios() to iterate future large folios
This allows us to use things like
bio_add_folio()/bio_add_folio_nofail(), and only set the needed flags
for the folio (aka the leading/tailing page), which reduces the loop
iteration to 1 for large folios.
- Change metadata related functions to use folio pointers
Including their function name, involving:
* attach_extent_buffer_page()
* detach_extent_buffer_page()
* page_range_has_eb()
* btrfs_release_extent_buffer_pages()
* btree_clear_page_dirty()
* btrfs_page_inc_eb_refs()
* btrfs_page_dec_eb_refs()
- Change btrfs_is_subpage() to accept an address_space pointer
This is to allow both page->mapping and folio->mapping to be utilized.
As data is still using the old per-page code, and may keep so for a
while.
- Special corner case place holder for future order mismatches between
extent buffer and inode filemap
For now it's just a block of comments and a dead ASSERT(), no real
handling yet.
The subpage code would still go page, just because subpage and large
folio are conflicting conditions, thus we don't need to bother subpage
with higher order folios at all. Just folio_page(folio, 0) would be
enough.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor styling tweaks ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For now extent_buffer::pages[] are still only accepting single page
pointer, thus we can migrate to folios pretty easily.
As for single page, page and folio are 1:1 mapped, including their page
flags.
This patch would just do the conversion from struct page to struct
folio, providing the first step to higher order folio in the future.
This conversion is pretty simple:
- extent_buffer::pages[] -> extent_buffer::folios[]
- page_address(eb->pages[i]) -> folio_address(eb->pages[i])
- eb->pages[i] -> folio_page(eb->folios[i], 0)
There would be more specific cleanups preparing for the incoming higher
order folio support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently alloc_extent_buffer() utilizes find_or_create_page() to
allocate one page a time for an extent buffer.
This method has the following disadvantages:
- find_or_create_page() is the legacy way of allocating new pages
With the new folio infrastructure, find_or_create_page() is just
redirected to filemap_get_folio().
- Lacks the way to support higher order (order >= 1) folios
As we can not yet let filemap give us a higher order folio.
This patch would change the workflow by the following way:
Old | new
-----------------------------------+-------------------------------------
| ret = btrfs_alloc_page_array();
for (i = 0; i < num_pages; i++) { | for (i = 0; i < num_pages; i++) {
p = find_or_create_page(); | ret = filemap_add_folio();
/* Attach page private */ | /* Reuse page cache if needed */
/* Reused eb if needed */ |
| /* Attach page private and
| reuse eb if needed */
| }
By this we split the page allocation and private attaching into two
parts, allowing future updates to each part more easily, and migrate to
folio interfaces (especially for possible higher order folios).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs extent buffer helpers are doing all the cross-page
handling, as there is no guarantee that all those eb pages are
contiguous.
However on systems with enough memory, there is a very high chance the
page cache for btree_inode are allocated with physically contiguous
pages.
In that case, we can skip all the complex cross-page handling, thus
speeding up the code.
This patch adds a new member, extent_buffer::addr, which is only set to
non-NULL if all the extent buffer pages are physically contiguous.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
EXTENT_BUFFER_ZONED_ZEROOUT better describes the state of the extent buffer,
namely it is written as all zeros. This is needed in zoned mode, to
preserve I/O ordering.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As a cleanup and preparation for future folio migration, this patch
would replace all page->private to folio version. This includes:
- PagePrivate()
-> folio_test_private()
- page->private
-> folio_get_private()
- attach_page_private()
-> folio_attach_private()
- detach_page_private()
-> folio_detach_private()
Since we're here, also remove the forced cast on page->private, since
it's (void *) already, we don't really need to do the cast.
For now even if we missed some call sites, it won't cause any problem
yet, as we're only using order 0 folio (single page), thus all those
folio/page flags should be synced.
But for the future conversion to utilize higher order folio, the page
<-> folio flag sync is no longer guaranteed, thus we have to migrate to
utilize folio flags.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The lock_owner is used for a rare corruption case and we haven't seen
any reports in years. Move it to the debugging section of eb. To close
the holes also move log_index so the final layout looks like:
struct extent_buffer {
u64 start; /* 0 8 */
long unsigned int len; /* 8 8 */
long unsigned int bflags; /* 16 8 */
struct btrfs_fs_info * fs_info; /* 24 8 */
spinlock_t refs_lock; /* 32 4 */
atomic_t refs; /* 36 4 */
int read_mirror; /* 40 4 */
s8 log_index; /* 44 1 */
/* XXX 3 bytes hole, try to pack */
struct callback_head callback_head __attribute__((__aligned__(8))); /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct rw_semaphore lock; /* 64 40 */
struct page * pages[16]; /* 104 128 */
/* size: 232, cachelines: 4, members: 11 */
/* sum members: 229, holes: 1, sum holes: 3 */
/* forced alignments: 1, forced holes: 1, sum forced holes: 3 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
This saves 8 bytes in total and still keeps the lock on a separate cacheline.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For metadata write out on the zoned mode, we call
btrfs_check_meta_write_pointer() to check if an extent buffer to be written
is aligned to the write pointer.
We look up a block group containing the extent buffer for every extent
buffer, which takes unnecessary effort as the writing extent buffers are
mostly contiguous.
Introduce "zoned_bg" to cache the block group working on. Also, while
at it, rename "cache" to "block_group".
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduce btrfs_eb_write_context to consolidate writeback_control and the
exntent buffer context. This will help adding a block group context as
well.
While at it, move the eb context setting before
btrfs_check_meta_write_pointer(). We can set it here because we anyway need
to skip pages in the same eb if that eb is rejected by
btrfs_check_meta_write_pointer().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Helpers write_extent_buffer_chunk_tree_uuid() and
write_extent_buffer_fsid(), they can be implemented by
write_extent_buffer().
These two helpers are not that frequently used, they only get called
during initialization of a new tree block. There is not much need for
those slightly optimized versions. And since they can be easily
converted to one write_extent_buffer() call, define them as inline
helpers.
This would make later page/folio switch much easier, as all change only
need to happen in write_extent_buffer().
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
extent_write_locked_range currently expects that either all or no
pages are dirty when it is called. Bur run_delalloc_zoned is called
directly in the writepages path, and has the dirty bit cleared only
for locked_page and which the extent_write_cache_pages currently
operates. It currently works around this by redirtying locked_page,
but that is a bit inefficient and cumbersome. Pass a locked_page
argument to run_delalloc_zoned so that clearing the dirty bit can
be skipped on just that page.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
compress_file_range needs to clear the dirty bit before handing off work
to the compression worker threads to prevent processes coming in through
mmap and changing the file contents while the compression is accessing
the data (See commit 4adaa611020f ("Btrfs: fix race between mmap writes
and compression").
But when compress_file_range decides to not compress the data, it falls
back to submit_uncompressed_range which uses extent_write_locked_range
to write the uncompressed data. extent_write_locked_range currently
expects all pages to be marked dirty so that it can clear the dirty
bit itself, and thus compress_file_range has to redirty the page range.
Redirtying the page range is rather inefficient and also pointless,
so instead pass a pages_dirty parameter to extent_write_locked_range
and skip the redirty game entirely.
Note that compress_file_range was even redirtying the locked_page twice
given that extent_range_clear_dirty_for_io already redirties all pages
in the range, which must include locked_page if there is one.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The return value from extent_write_locked_range is ignored, and that's
fine because the error reporting happens through the mapping and
ordered_extent.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
end_extent_writepage is a small helper that combines a call to
btrfs_mark_ordered_io_finished with conditional error-only calls to
btrfs_page_clear_uptodate and mapping_set_error with a somewhat
unfortunate calling convention that passes and inclusive end instead
of the len expected by the underlying functions.
Remove end_extent_writepage and open code it in the 4 callers. Out
of those two already are error-only and thus don't need the extra
conditional, and one already has the mapping_set_error, so a duplicate
call can be avoided.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
