| Age | Commit message (Collapse) | Author |
|---|
|
struct at91_cf_data is only used in the driver since all the platforms moved
to device tree, move its definition locally.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930184804.3127757-1-alexandre.belloni@bootlin.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
|
|
We need to enable no-reset-on-init quirk for GPMC if the config
option for CONFIG_OMAP_GPMC_DEBUG is set. Otherwise the GPMC
driver code is unable to show the bootloader configured timings.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The ehci-mxc driver was only used by i.MX non-DT platforms.
Since 5.10-rc1, i.MX has been converted to a DT-only platform and all
board files are gone.
Remove the ehci-mxc driver as there are no more users at all.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201113171231.2205-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Import the EC_CMD_TYPEC_STATUS and EC_CMD_TYPEC_DISCOVERY Chrome OS EC
host commands from the EC code base [1].
These commands can be used by the application processor to query Power
Delivery (PD) discovery information concerning connected Type C
peripherals.
Also add the EC_FEATURE_TYPEC_CMD feature flag, which is used to
determine whether these commands are supported by the EC.
[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20201029222738.482366-5-pmalani@chromium.org
|
|
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing
platform data support in this driver was only useful for old non-devicetree
platforms.
Get rid of the platform data support since it is no longer used.
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201110214840.16768-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a basic DSA driver for Hirschmann Hellcreek switches. Those switches are
implementing features needed for Time Sensitive Networking (TSN) such as support
for the Time Precision Protocol and various shapers like the Time Aware Shaper.
This driver includes basic support for networking:
* VLAN handling
* FDB handling
* Port statistics
* STP
* Phylink
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
- doc: rules for EBUSY on non-blocking commits; requirements for fourcc
modifiers; on parsing EDID
- fbdev/sbuslib: Remove unused FBIOSCURSOR32
- fourcc: deprecate DRM_FORMAT_MOD_NONE
- virtio: Support blob resources for memory allocations; Expose host-visible
and cross-device features
Cross-subsystem Changes:
- devicetree: Add vendor Prefix for Yes Optoelectronics, Shanghai Top Display
Optoelectronics
- dma-buf: Add struct dma_buf_map that stores DMA pointer and I/O-memory flag;
dma_buf_vmap()/vunmap() return address in dma_buf_map; Use struct_size() macro
Core Changes:
- atomic: pass full state to CRTC atomic enable/disable; warn for EBUSY during
non-blocking commits
- dp: Prepare for DP 2.0 DPCD
- dp_mst: Receive extended DPCD caps
- dma-buf: Documentation
- doc: Format modifiers; dma-buf-map; Cleanups
- fbdev: Don't use compat_alloc_user_space(); mark as orphaned
- fb-helper: Take lock in drm_fb_helper_restore_work_fb()
- gem: Convert implementation and drivers to GEM object functions, remove
GEM callbacks from struct drm_driver (expect gem_prime_mmap)
- panel: Cleanups
- pci: Add legacy infix to drm_irq_by_busid()
- sched: Avoid infinite waits in drm_sched_entity_destroy()
- switcheroo: Cleanups
- ttm: Remove AGP support; Don't modify caching during swapout; Major
refactoring of the implementation and API that affects all depending
drivers; Add ttm_bo_wait_ctx(); Add ttm_bo_pin()/unpin() in favor of
TTM_PL_FLAG_NO_EVICT; Remove ttm_bo_create(); Remove fault_reserve_notify()
callback; Push move() implementation into drivers; Remove TTM_PAGE_FLAG_WRITE;
Replace caching flags with init-time cache setting; Push ttm_tt_bind() into
drivers; Replace move_notify() with delete_mem_notify(); No overlapping memcpy();
no more ttm_set_populated()
- vram-helper: Fix BO top-down placement; TTM-related changes; Init GEM
object functions with defaults; Default placement in system memory; Cleanups
Driver Changes:
- amdgpu: Use GEM object functions
- armada: Use GEM object functions
- aspeed: Configure output via sysfs; Init struct drm_driver with
- ast: Reload LUT after FB format changes
- bridge: Add driver and DT bindings for anx7625; Cleanups
- bridge/dw-hdmi: Constify ops
- bridge/ti-sn65dsi86: Add retries for link training
- bridge/lvds-codec: Add support for regulator
- bridge/tc358768: Restore connector support DRM_GEM_CMA_DRIVEROPS; Cleanups
- display/ti,j721e-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- display/ti,am65s-dss: Add DT properies assigned-clocks, assigned-clocks-parent and
dma-coherent
- etnaviv: Use GEM object functions
- exynos: Use GEM object functions
- fbdev: Cleanups and compiler fixes throughout framebuffer drivers
- fbdev/cirrusfb: Avoid division by 0
- gma500: Use GEM object functions; Fix double-free of connector; Cleanups
- hisilicon/hibmc: I2C-based DDC support; Use to_hibmc_drm_device(); Cleanups
- i915: Use GEM object functions
- imx/dcss: Init driver with DRM_GEM_CMA_DRIVER_OPS; Cleanups
- ingenic: Reset pixel clock when parent clock changes; support reserved
memory; Alloc F0 and F1 DMA channels at once; Support different pixel formats;
Revert support for cached mmap buffers
on F0/F1; support 30-bit/24-bit/8-bit-palette modes
- komeda: Use DEFINE_SHOW_ATTRIBUTE
- mcde: Detect platform_get_irq() errors
- mediatek: Use GEM object functions
- msm: Use GEM object functions
- nouveau: Cleanups; TTM-related changes; Use GEM object functions
- omapdrm: Use GEM object functions
- panel: Add driver and DT bindings for Novatak nt36672a; Add driver and DT
bindings for YTC700TLAG-05-201C; Add driver and DT bindings for TDO TL070WSH30;
Cleanups
- panel/mantix: Fix reset; Fix deref of NULL pointer in mantix_get_modes()
- panel/otm8009a: Allow non-continuous dsi clock; Cleanups
- panel/rm68200: Allow non-continuous dsi clock; Fix mode to 50 FPS
- panfrost: Fix job timeout handling; Cleanups
- pl111: Use GEM object functions
- qxl: Cleanups; TTM-related changes; Pin new BOs with ttm_bo_init_reserved()
- radeon: Cleanups; TTM-related changes; Use GEM object functions
- rockchip: Use GEM object functions
- shmobile: Cleanups
- tegra: Use GEM object functions
- tidss: Set drm_plane_helper_funcs.prepare_fb
- tilcdc: Don't keep vblank interrupt enabled all the time
- tve200: Detect platform_get_irq() errors
- vc4: Use GEM object functions; Only register components once DSI is attached;
Add Maxime as maintainer
- vgem: Use GEM object functions
- via: Simplify critical section in via_mem_alloc()
- virtgpu: Use GEM object functions
- virtio: Implement blob resources, host-visible and cross-device features;
Support mapping of host-allocated resources; Use UUID APi; Cleanups
- vkms: Use GEM object functions; Switch to SHMEM
- vmwgfx: TTM-related changes; Inline ttm_bo_swapout_all()
- xen: Use GEM object functions
- xlnx: Use GEM object functions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201027100936.GA4858@linux-uq9g
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
flexible-array member
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
The UX360CA has a WMI device id 0x00060062, which reports whether the
lid is flipped in tablet mode (1) or in normal laptop mode (0).
Add a quirk (quirk_asus_use_lid_flip_devid) for devices on which this
WMI device should be used to figure out the SW_TABLET_MODE state, as
opposed to the quirk_asus_use_kbd_dock_devid.
Additionally, the device needs to be queried on resume and restore
because the firmware does not generate an event if the laptop is put to
sleep while in tablet mode, flipped to normal mode, and later awoken.
It is assumed other UX360* models have the same WMI device. As such, the
quirk is applied to devices with DMI_MATCH(DMI_PRODUCT_NAME, "UX360").
More devices with this feature need to be tested and added accordingly.
The reason for using an allowlist via the quirk mechanism is that the new
WMI device (0x00060062) is also present on some models which do not have
a 360 degree hinge (at least FX503VD and GL503VD from Hans' DSTS
collection) and therefore its presence cannot be relied on.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201020220944.1075530-1-samuel@cavoj.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There are no users of this headers file in the kernel.
All users are likely migrated to device tree which is a good thing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The change removes the platform_data include/definition. It only contains
some values for the MICBIAS.
These are moved into 'dt-bindings/sound/adi,adau1977.h' so that they can be
used inside device-trees. When moving then, they need to be converted to
pre-compiler defines, so that the DT compiler can understand them.
The driver then, also needs to include the new
'dt-bindings/sound/adi,adau1977.h' file.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201019105313.24862-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and
wait for softreset bit") started showing a "OCP softreset timed out"
warning on enable if the interconnect target module is not out of reset.
This caused the warning to be often triggered for i2c and hdq while the
devices are working properly.
Turns out that some interconnect target modules seem to have an unusable
reset status bits unless the module specific reset quirks are activated.
Let's just skip the reset status check for those modules as we only want
to activate the reset quirks when doing a reset, and not on enable. This
way we don't see the bogus "OCP softreset timed out" warnings during boot.
Fixes: d46f9fbec719 ("bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit")
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
- toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
- toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
HyperBus changes:
- DMA support for TI's AM654 HyperBus controller driver.
- HyperBus frontend driver for Renesas RPC-IF driver.
SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi Add Alder Lake-S PCI ID
MTD Core changes:
- mtdoops: Don't run panic write twice
- mtdconcat: Correctly handle panic write
- Use DEFINE_SHOW_ATTRIBUTE"
* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
mtd: hyperbus: add Renesas RPC-IF driver
Revert "mtd: spi-nor: Prefer asynchronous probe"
mtd: parsers: bcm63xx: Do not make it modular
mtd: spear_smi: Enable compile testing
mtd: maps: vmu-flash: fix typos for struct memcard
mtd: physmap: Add Baikal-T1 physically mapped ROM support
mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
mtd: rawnand: cadence: remove a redundant dev_err call
mtd: rawnand: ams-delta: Fix non-OF build warning
mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
mtd: rawnand: atmel: Check return values for nand_read_data_op
mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
mtd: rawnand: qcom: Simplify with dev_err_probe()
mtd: rawnand: marvell: Fix and update kerneldoc
mtd: rawnand: marvell: Simplify with dev_err_probe()
mtd: rawnand: gpmi: Simplify with dev_err_probe()
mtd: rawnand: atmel: Simplify with dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Mark dma_request_slave_channel() deprecated in favour of
dma_request_chan()
- subsystem conversion for tasklet_setup() API
- subsystem removal of local dma_parms for arm drivers
Also updates to bunch of driver notably TI, DW and AXI-DMAC"
* tag 'dmaengine-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (104 commits)
dmaengine: owl-dma: fix kernel-doc style for enum
dmaengine: zynqmp_dma: fix kernel-doc style for tasklet
dmaengine: xilinx_dma: fix kernel-doc style for tasklet
dmaengine: qcom: bam_dma: fix kernel-doc style for tasklet
dmaengine: altera-msgdma: fix kernel-doc style for tasklet
dmaengine: xilinx: dpdma: convert tasklets to use new tasklet_setup() API
dmaengine: sf-pdma: convert tasklets to use new tasklet_setup() API
dt-bindings: Fix 'reg' size issues in zynqmp examples
dmaengine: rcar-dmac: drop double zeroing
dmaengine: sh: drop double zeroing
dmaengine: ioat: Allocate correct size for descriptor chunk
dmaengine: ti: k3-udma: use devm_platform_ioremap_resource_byname
dmaengine: fsl: remove bad channel update
dmaengine: dma-jz4780: Fix race in jz4780_dma_tx_status
dmaengine: pl330: fix argument for tasklet
dmaengine: dmatest: Return boolean result directly in filter()
dmaengine: dmatest: Check list for emptiness before access its last entry
dmaengine: ti: k3-udma-glue: fix channel enable functions
dmaengine: iop-adma: Fix pointer cast warnings
dmaengine: dw-edma: Fix Using plain integer as NULL pointer in dw-edma-v0-debugfs.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver updates for 5.10-rc1.
Included in here are:
- new IIO drivers
- new IIO driver frameworks
- various IIO driver fixes and updates
- IIO device tree conversions to yaml
- so many minor staging driver coding style cleanups
- most cdev driver moved out of staging
- no staging drivers added or removed
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits)
staging: comedi: check validity of wMaxPacketSize of usb endpoints found
staging: wfx: improve robustness of wfx_get_hw_rate()
staging: wfx: drop unicode characters from strings
staging: wfx: gpiod_get_value() can return an error
staging: wfx: increase robustness of hif_generic_confirm()
staging: wfx: wfx_init_common() returns NULL on error
staging: wfx: standardize the error when vif does not exist
staging: wfx: check memory allocation
staging: wfx: improve error handling of hif_join()
staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c
staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c
staging: rtl8188eu: Fix long lines
dt-bindings: staging: wfx: silabs,wfx yaml conversion
staging: wfx: update copyrights dates
staging: wfx: fix QoS priority for slow buses
staging: wfx: fix BA sessions for older firmwares
staging: wfx: remove remaining code of 'secure link' feature
staging: wfx: fix handling of MMIC error
staging: vchiq: Fix list_for_each exit tests
staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Quite a lot of stuff is going on here. Great cleanups/fixes from Marek
and others are biggest part.
I limited CPU LED trigger to 8 LEDs, because it was willing to
register 1024 'triggers' on machine with 1024 CPUs. I don't believe it
will cause any problems, but we can raise the limit if it does"
* tag 'leds-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (84 commits)
leds: pwm: Remove platform_data support
leds: lm3697: Fix out-of-bound access
leds: ns2: do not guard OF match pointer with of_match_ptr
leds: ns2: convert to fwnode API
leds: tlc591xx: fix leak of device node iterator
leds: pca963x: use struct led_init_data when registering
leds: pca963x: register LEDs immediately after parsing, get rid of platdata
leds: tca6507: remove binding comment
leds: tca6507: cosmetic change: use helper variable
leds: tca6507: do not set GPIO names
dt-bindings: leds: tca6507: convert to YAML
ledtrig-cpu: Limit to 8 CPUs
leds: TODO: Add documentation about possible subsystem improvements
leds: pca9532: read pwm settings from device tree
leds: pca9532: correct shift computation in pca9532_getled
leds: lm36274: Fix warning for undefined parameters
leds: lm3532: Fix warnings for undefined parameters
leds: pca963x: use flexible array
leds: pca963x: cosmetic: rename variables
leds: pca963x: cosmetic: rename variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Rather calm cycle for x86 platform drivers, all these have been in
for-next for a couple of days with no bot complaints.
Highlights:
- PMC TigerLake fixes and new RocketLake support
- various small fixes / updates in other drivers/tools"
* tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo
platform/x86: mlx-platform: Add capability field to platform FAN description
platform_data/mlxreg: Extend core platform structure
platform_data/mlxreg: Update module license
platform/x86: mlx-platform: Remove PSU EEPROM configuration
MAINTAINERS: Update maintainers for pmc_core driver
platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info()
platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support
platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize
platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value
platform/x86: intel_pmc_core: Fix TigerLake power gating status map
platform/x86: pmc_core: Use descriptive names for LPM registers
tools/power/x86/intel-speed-select: Update version for v5.10
tools/power/x86/intel-speed-select: Fix missing base-freq core IDs
platform/x86: hp-wmi: add support for thermal policy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver and chip support:
- Moortec MR75203 PVT controller
- MPS Multi-phase mp2975 controller
- ADM1266
- Zen3 CPUs
- Intel MAX 10 BMC
Enhancements:
- Support for rated attributes in hwmon core
- MAX20730:
- Device monitoring via debugfs
- VOUT readin adjustment vie devicetree bindings
- LM75:
- Devicetree support
- Regulator support
- Improved accumulationm logic in amd_energy driver
- Added fan sensor to gsc-hwmon driver
- Support for simplified I2C probing
Various other minor fixes and improvements"
* tag 'hwmon-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (64 commits)
hwmon: (pmbus/max20730) adjust the vout reading given voltage divider
dt-bindings: hwmon: max20730: adding device tree doc for max20730
hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller
hwmon: Add DT bindings schema for PVT controller
dt-bindings: hwmon: Add the +vs supply to the lm75 bindings
dt-bindings: hwmon: Convert lm75 bindings to yaml
docs: hwmon: (ltc2945) update datasheet link
hwmon: (mlxreg-fan) Fix double "Mellanox"
hwmon: (pmbus/max20730) add device monitoring via debugfs
hwmon: (pmbus/max34440) Fix OC fault limits
hwmon: (bt1-pvt) Wait for the completion with timeout
hwmon: (bt1-pvt) Cache current update timeout
hwmon: (bt1-pvt) Test sensor power supply on probe
hwmon: (lm75) Add regulator support
hwmon: Add hwmon driver for Intel MAX 10 BMC
dt-bindings: Add MP2975 voltage regulator device
hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller
hwmon: (tmp513) fix spelling typo in comments
hwmon: (amd_energy) Update driver documentation
hwmon: (amd_energy) Improve the accumulation logic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This time very little driver changes but lots of core changes.
We have some interesting cooperative work for ARM and Intel alike,
making the GPIO subsystem more and more suitable for industrial
systems and the like, in addition to the in-kernel users.
We touch driver core (device properties) and lib/* by adding one
simple string array free function, these are authored by Andy
Shevchenko who is a well known and recognized core helpers maintainers
so this should be fine.
We also see some Android GKI-related modularization in the MXC
drivers.
Core changes:
- The big core change is the updated (v2) userspace character device
API.
This corrects badly designed 64-bit alignment around the line
events. We also add the debounce request feature. This echoes the
often quotes passage from Frederick Brooks "The mythical man-month"
to always throw one away, which we have seen before in things such
as V4L2. So we put in a new one and deprecate and obsolete the old
one.
- All example tools in tools/gpio/* are migrated to the new API to
set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in device
properties.
- Provide a generic library function kfree_strarray() that can be
used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now uses the
IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial code
clean-up and now use more of the core kernel inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized, which
makes modularized GKI Android kernels happy"
* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpiolib: Update header block in gpiolib-cdev.h
gpiolib: cdev: switch from kstrdup() to kstrndup()
docs: gpio: add a new document to its index.rst
gpio: pca953x: Add support for the NXP PCAL9554B/C
tools: gpio: add debounce support to gpio-event-mon
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: port lsgpio to v2 uAPI
gpio: uapi: document uAPI v1 as deprecated
gpiolib: cdev: support setting debounce
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: add build option for CDEV v1 ABI
gpiolib: make cdev a build option
...
|
|
This file doesn't need anything provided by <linux/kernel.h>.
All it needs are some types, which are provided by <drm/drm_mode.h>.
Drop unneeded <linux/kernel.h> completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200422125201.37618-1-andriy.shevchenko@linux.intel.com
|
|
The information in the ad7303 platform_data header is unused, so it's dead
code.
This change removes it and it's inclusion from the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001141004.53846-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change removes the old platform data for ad7298. It is only used to
provide whether to use an external regulator as a reference.
So, the logic is inverted a bit. The driver now tries to obtain a
regulator. If one is provided, then the external ref is used. The rest of
the logic should work as before.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001141048.69050-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change inverts/reworks the logic to use an external reference via a
provided regulator.
Now the driver tries to obtain a regulator. If one is found, then it is
used. The rest of the driver logic already checks if there is a non-NULL
reference to a regulator, so it should be fine.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201002082723.184810-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data
type. This is no longer used (at least in mainline boards).
This change removes the platform-data initialization from the driver, since
it is mostly dead code now.
Some definitions [from the platform data at91_adc.h include] have been
moved in the driver, since they are needed in the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-5-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add 'capability' field to structure 'mlxreg_core_platform_data'.
The purpose of this filed to indicate the actual number of the
components within the particular group. Such components could be,
for example the number of the FAN drawers. Some systems are equipped
with FAN drawers with one tachometer inside, others with FAN drawers
with several tachometers inside.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200923172053.26296-5-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update license to SPDX-License.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200923172053.26296-4-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct macb_platform_data is only used by macb_pci to register the platform
device, move its definition to cadence/macb.h and remove platform_data/macb.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register LEDs immediately after parsing their properties.
This allows us to get rid of platdata, and since no one in tree uses
header linux/platform_data/leds-pca963x.h, remove it.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Cc: Zahari Petkov <zahari@balena.io>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
There are no in-tree users of the platform data for this driver, so
remove it and convert the driver to use device tree instead.
Signed-off-by: Michael Auchter <michael.auchter@ni.com>
Link: https://lore.kernel.org/r/20200922144422.542669-1-michael.auchter@ni.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
|
|
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-10-miquel.raynal@bootlin.com
|
|
AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
Schematics show that the GPIO number is 55 (not 59). Trivial typo.
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add a fan sensor to report RPM's from a fan tach input.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc
Add initial genpd support for omaps to drop more platform data
We now drop legacy platform data for RTC on am3, am4 and dra7.
And we add initial genpd support for PRM (Power and Reset Manager)
and use it to drop legacy platform data for am3 sgx and omap4/5
l4_abe interconnect instance.
* tag 'omap-for-v5.10/ti-sysc-drop-pdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Drop legacy platform data for dra7 rtcss
ARM: OMAP2+: Drop legacy platform data for am3 and am4 rtc
soc: ti: pm33xx: Simplify RTC usage to prepare to drop platform data
ARM: dts: Configure omap4 and 5 l4_abe for genpd and drop platform data
ARM: dts: Configure am3 and am4 sgx for genpd and drop platform data
soc: ti: omap-prm: Configure omap4 and 5 l4_abe power domain
soc: ti: omap-prm: Configure sgx power domain for am3 and am4
soc: ti: omap-prm: Add basic power domain support
dt-bindings: omap: Update PRM binding for genpd
Link: https://lore.kernel.org/r/pull-1599132307-761202@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Add a new macro DWAPB_MAX_GPIOS which defines the maximum possible number
of GPIO lines corresponding to the maximum DW APB GPIO controller port
width. Use the new macro instead of number literal 32 where it's
applicable.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200730152808.2955-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We must re-enable the RTC module clock enabled in RTC+DDR suspend, and
pm33xx has been using platform data callbacks for that. Looks like for
retention suspend the RTC module clock must not be re-enabled.
To remove the legacy platform data callbacks, and eventually be able to
drop the RTC legacy platform data, let's manage the RTC module clock
and register range directly in pm33xx.
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Drop the repeated word "and" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The s3c2410fb driver is too deeply intertwined with the s3c24xx
platform code. Change it in a way that avoids the use of platform
header files but having all interface data in a platform_data
header, and the private register definitions next to the driver
itself.
One ugly bit here is that the driver pokes directly into gpio
registers, which are owned by another driver. Passing the
mapped addresses in platform_data is somewhat suboptimal, but
it is a small improvement over the previous version.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-33-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Rather than call the internal s3c_gpio_cfgall_range() function
through a platform header, move the code into the set_power
callback that is already exported by the board, and add
a default implementation.
In DT mode, the code already does not set the pin config,
so nothing changes there.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-29-krzk@kernel.org
[krzk: Rebase and correct set_power in mach-h1940.c]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
There is no real phy driver, so s3c-hsudc just pokes the registers
itself. Improve this a little by making it a platform data callback
like we do for gpios.
There is only one board using this driver, and it's unlikely
that another would be added, so this is a minimal workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-9-krzk@kernel.org
[krzk: Include regs-s3c2443-clock.h in ifdef to fixup build on s3c6400]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Passing pointers directly as platform data is fragile and undocumented.
Better to create a platform data structure which explicitly documents
what is passed to the driver.
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-6-krzk@kernel.org
|
|
DW DMA IP-core provides a way to synthesize the DMA controller with
channels having different parameters like maximum burst-length,
multi-block support, maximum data width, etc. Those parameters both
explicitly and implicitly affect the channels performance. Since DMA slave
devices might be very demanding to the DMA performance, let's provide a
functionality for the slaves to be assigned with DW DMA channels, which
performance according to the platform engineer fulfill their requirements.
After this patch is applied it can be done by passing the mask of suitable
DMA-channels either directly in the dw_dma_slave structure instance or as
a fifth cell of the DMA DT-property. If mask is zero or not provided, then
there is no limitation on the channels allocation.
For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first
two channels are synthesized with max burst length of 16, while the rest
of the channels have been created with max-burst-len=4. It would seem that
the first two channels must be faster than the others and should be more
preferable for the time-critical DMA slave devices. In practice it turned
out that the situation is quite the opposite. The channels with
max-burst-len=4 demonstrated a better performance than the channels with
max-burst-len=16 even when they both had been initialized with the same
settings. The performance drop of the first two DMA-channels made them
unsuitable for the DW APB SSI slave device. No matter what settings they
are configured with, full-duplex SPI transfers occasionally experience the
Rx FIFO overflow. It means that the DMA-engine doesn't keep up with
incoming data pace even though the SPI-bus is enabled with speed of 25MHz
while the DW DMA controller is clocked with 50MHz signal. There is no such
problem has been noticed for the channels synthesized with
max-burst-len=4.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen)"
* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
clk: x86: Support RV architecture
ACPI: APD: Add a fmw property is_raven
clk: x86: Change name from ST to FCH
ACPI: APD: Change name from ST to FCH
i2c: designware: Add device HID for Hygon I2C controller
|
