| Age | Commit message (Collapse) | Author |
|---|
|
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Keep track of the number requests a ring currently has allocated (and
not freed), it'll be needed in the next patch.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c8f8308294dc2a1cb8925d984d937d4fc14ab5d4.1746788718.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit f7ee1f13d606 ("mm/vmalloc: enable mapping of huge pages at pte
level in vmap") added its support by reusing the set_huge_pte_at() API,
which is otherwise only used for user mappings. But when unmapping those
huge ptes, it continued to call ptep_get_and_clear(), which is a
layering violation. To date, the only arch to implement this support is
powerpc and it all happens to work ok for it.
But arm64's implementation of ptep_get_and_clear() can not be safely
used to clear a previous set_huge_pte_at(). So let's introduce a new
arch opt-in function, arch_vmap_pte_range_unmap_size(), which can
provide the size of a (present) pte. Then we can call
huge_ptep_get_and_clear() to tear it down properly.
Note that if vunmap_range() is called with a range that starts in the
middle of a huge pte-mapped page, we must unmap the entire huge page so
the behaviour is consistent with pmd and pud block mappings. In this
case emit a warning just like we do for pmd/pud mappings.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20250422081822.1836315-9-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Convert page_table_check_p[mu]d_set(...) to
page_table_check_p[mu]ds_set(..., nr) to allow checking a contiguous set
of pmds/puds in single batch. We retain page_table_check_p[mu]d_set(...)
as macros that call new batch functions with nr=1 for compatibility.
arm64 is about to reorganise its pte/pmd/pud helpers to reuse more code
and to allow the implementation for huge_pte to more efficiently set
ptes/pmds/puds in batches. We need these batch-helpers to make the
refactoring possible.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20250422081822.1836315-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When CONFIG_CGROUPS is not selected, {get,put}_cgroup_ns become no-ops
and therefore it is not necessary to compile in the code for changing
the reference count.
When CONFIG_CGROUP is selected, there is no valid case where
either of {get,put}_cgroup_ns() will be called with a NULL argument.
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Link: https://lore.kernel.org/20250508184930.183040-3-jsavitz@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Allow the power subsystem to support filesystem freeze for
suspend and hibernate.
For some kernel subsystems it is paramount that they are guaranteed that
they are the owner of the freeze to avoid any risk of deadlocks. This is
the case for the power subsystem. Enable it to recognize whether it did
actually freeze the filesystem.
If userspace has 10 filesystems and suspend/hibernate manges to freeze 5
and then fails on the 6th for whatever odd reason (current or future)
then power needs to undo the freeze of the first 5 filesystems. It can't
just walk the list again because while it's unlikely that a new
filesystem got added in the meantime it still cannot tell which
filesystems the power subsystem actually managed to get a freeze
reference count on that needs to be dropped during thaw.
There's various ways out of this ugliness. For example, record the
filesystems the power subsystem managed to freeze on a temporary list in
the callbacks and then walk that list backwards during thaw to undo the
freezing or make sure that the power subsystem just actually exclusively
freezes things it can freeze and marking such filesystems as being owned
by power for the duration of the suspend or resume cycle. I opted for
the latter as that seemed the clean thing to do even if it means more
code changes.
If hibernation races with filesystem freezing (e.g. DM reconfiguration),
then hibernation need not freeze a filesystem because it's already
frozen but userspace may thaw the filesystem before hibernation actually
happens.
If the race happens the other way around, DM reconfiguration may
unexpectedly fail with EBUSY.
So allow FREEZE_EXCL to nest with other holders. An exclusive freezer
cannot be undone by any of the other concurrent freezers.
Link: https://lore.kernel.org/r/20250329-work-freeze-v2-6-a47af37ecc3d@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some NETC functionality is controlled using control messages sent to the
hardware using BD ring interface with 32B descriptor similar to transmit
BD ring used on ENETC. This BD ring interface is referred to as command
BD ring. It is used to configure functionality where the underlying
resources may be shared between different entities or being too large to
configure using direct registers. Therefore, a messaging protocol called
NETC Table Management Protocol (NTMP) is provided for exchanging
configuration and management information between the software and the
hardware using the command BD ring interface.
For the management protocol of LS1028A has been retroactively named NTMP
1.0, and its implementation is in enetc_cbdr.c and enetc_qos.c. However,
NTMP of i.MX95 has been upgraded to version 2.0, which is incompatible
with LS1028A, because the message formats have been changed. Therefore,
add the netc-lib driver to support NTMP 2.0 to operate various tables.
Note that, only MAC address filter table and RSS table are supported at
the moment. More tables will be supported in subsequent patches.
It is worth mentioning that the purpose of the netc-lib driver is to
provide some NTMP-based generic interfaces for ENETC and NETC Switch
drivers. Currently, it only supports the configurations of some tables.
Interfaces such as tc flower and debugfs will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new TSM Measurement helper library (tsm-mr) for TVM guest drivers
to expose MRs (Measurement Registers) as sysfs attributes, with Crypto
Agility support.
Add the following new APIs (see include/linux/tsm-mr.h for details):
- tsm_mr_create_attribute_group(): Take on input a `struct
tsm_measurements` instance, which includes one `struct
tsm_measurement_register` per MR with properties like `TSM_MR_F_READABLE`
and `TSM_MR_F_WRITABLE`, to determine the supported operations and create
the sysfs attributes accordingly. On success, return a `struct
attribute_group` instance that will typically be included by the guest
driver into `miscdevice.groups` before calling misc_register().
- tsm_mr_free_attribute_group(): Free the memory allocated to the attrubute
group returned by tsm_mr_create_attribute_group().
tsm_mr_create_attribute_group() creates one attribute for each MR, with
names following this pattern:
MRNAME[:HASH]
- MRNAME - Placeholder for the MR name, as specified by
`tsm_measurement_register.mr_name`.
- :HASH - Optional suffix indicating the hash algorithm associated with
this MR, as specified by `tsm_measurement_register.mr_hash`.
Support Crypto Agility by allowing multiple definitions of the same MR
(i.e., with the same `mr_name`) with distinct HASH algorithms.
NOTE: Crypto Agility, introduced in TPM 2.0, allows new hash algorithms to
be introduced without breaking compatibility with applications using older
algorithms. CC architectures may face the same challenge in the future,
needing new hashes for security while retaining compatibility with older
hashes, hence the need for Crypto Agility.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Dionna Amalie Glaze <dionnaglaze@google.com>
[djbw: fixup bin_attr const conflict]
Link: https://patch.msgid.link/20250509020739.882913-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Retain the locked design, but check rate-limiting even when the lock
could not be acquired.
Link: https://lore.kernel.org/all/Z_VRo63o2UsVoxLG@pathway.suse.cz/
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
The ___ratelimit() function special-cases the jiffies-counter value of zero
as "uninitialized". This works well on 64-bit systems, where the jiffies
counter is not going to return to zero for more than half a billion years
on systems with HZ=1000, but similar 32-bit systems take less than 50 days
to wrap the jiffies counter. And although the consequences of wrapping the
jiffies counter seem to be limited to minor confusion on the duration of
the rate-limiting interval that happens to end at time zero, it is almost
no work to avoid this confusion.
Therefore, introduce a RATELIMIT_INITIALIZED bit to the ratelimit_state
structure's ->flags field so that a ->begin value of zero is no longer
special.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
The ratelimit_state structure's ->missed field is sometimes incremented
locklessly, and it would be good to avoid lost counts. This is also
needed to count the number of misses due to trylock failure. Therefore,
convert the ratelimit_state structure's ->missed field to atomic_t.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
A number of ratelimit use cases do open-coded access to the
ratelimit_state structure's ->missed field. This works, but is a bit
messy and makes it more annoying to make changes to this field.
Therefore, provide a ratelimit_state_inc_miss() function that increments
the ->missed field, a ratelimit_state_get_miss() function that reads
out the ->missed field, and a ratelimit_state_reset_miss() function
that reads out that field, but that also resets its value to zero.
These functions will replace client-code open-coded uses of ->missed.
In addition, a new ratelimit_state_reset_interval() function encapsulates
what was previously open-coded lock acquisition and direct field updates.
[ paulmck: Apply kernel test robot feedback. ]
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
|
|
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The CPU hotplug handlers are called twice: at prepare and online stage.
Their role is to:
1) Enable/disable a CPU context. This is irrelevant and even buggy at
the prepare stage because the CPU is still offline. On early
secondary CPU up, creating an event attached to that CPU might
silently fail because the CPU context is observed as online but the
context installation's IPI failure is ignored.
2) Update the scope cpumasks and re-migrate the events accordingly in
the CPU down case. This is irrelevant at the prepare stage.
3) Remove the events attached to the context of the offlining CPU. It
even uses an (unnecessary) IPI for it. This is also irrelevant at the
prepare stage.
Also none of the *_PREPARE and *_STARTING architecture perf related CPU
hotplug callbacks rely on CPUHP_PERF_PREPARE.
CPUHP_AP_PERF_ONLINE is enough and the right place to perform the work.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424161128.29176-4-frederic@kernel.org
|
|
Since commit 2070887fdeac ("futex: fix restart in wait_requeue_pi"),
futex_wait_requeue_pi() no longer uses restart_block. Update the comment
accordingly.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250428193445.4571-1-namcao@linutronix.de
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-10-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Move this API to the canonical timers_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-8-mingo@kernel.org
|
|
Move this macro to the canonical TIMER_* namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-7-mingo@kernel.org
|
|
Move this API to the canonical __timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-6-mingo@kernel.org
|
|
Move this API to the canonical __timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-5-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-4-mingo@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-3-mingo@kernel.org
|
|
Pull in the platform MSI/GIC changes which are seperate for the PCI
endpoint driver updates.
|
|
Since the integer wrapping sanitizer's behavior depends on its associated
.scl file, we must force a full rebuild if the file changes. If not,
instrumentation may differ between targets based on when they were built.
Generate a new header file, integer-wrap.h, any time the Clang .scl
file changes. Include the header file in compiler-version.h when its
associated feature name, INTEGER_WRAP, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Acked-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20250503184623.2572355-3-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
While the randstruct GCC plugin was being rebuilt if the randstruct seed
changed, Clang builds did not notice the change. This could result in
differing struct layouts in a target depending on when it was built.
Include the existing generated header file in compiler-version.h when
its associated feature name, RANDSTRUCT, is defined. This will be picked
up by fixdep and force rebuilds where needed.
Link: https://lore.kernel.org/r/20250503184623.2572355-2-kees@kernel.org
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There was no dependency between the plugins changing and the rest of the
kernel being built. This could cause strange behaviors as instrumentation
could vary between targets depending on when they were built.
Generate a new header file, gcc-plugins.h, any time the GCC plugins
change. Include the header file in compiler-version.h when its associated
feature name, GCC_PLUGINS, is defined. This will be picked up by fixdep
and force rebuilds where needed.
Add a generic "touch" kbuild command, which will be used again in
a following patch. Add a "normalize_path" string helper to make the
"TOUCH" output less ugly.
Link: https://lore.kernel.org/r/20250503184623.2572355-1-kees@kernel.org
Tested-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Currently, to statically initialize the struct members of the `type`
object created by _DEFINE_FLEX(), the internal `obj` member must be
explicitly referenced at the call site. See:
struct flex {
int a;
int b;
struct foo flex_array[];
};
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.obj = {
.a = 0,
.b = 1,
},
});
This leaks _DEFINE_FLEX() internal implementation details and make
the helper harder to use and read.
Fix this and allow for a more natural and intuitive C99 init-style:
_DEFINE_FLEX(struct flex, instance, flex_array,
FIXED_SIZE, = {
.a = 0,
.b = 1,
});
Note that before these changes, the `initializer` argument was optional,
but now it's required.
Also, update "counter" member initialization in DEFINE_FLEX().
Fixes: 26dd68d293fd ("overflow: add DEFINE_FLEX() for on-stack allocs")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/aBQVeyKfLOkO9Yss@kspp
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Add new STACK_FLEX_ARRAY_SIZE() helper to get the size of a
flexible-array member defined using DEFINE_FLEX()/DEFINE_RAW_FLEX()
at compile time.
This is essentially the same as ARRAY_SIZE() but for on-stack
flexible-array members.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/83d53744e11c80eb3f03765238cbe648855f4168.1745355442.git.gustavoars@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc6).
No conflicts.
Adjacent changes:
net/core/dev.c:
08e9f2d584c4 ("net: Lock netdevices during dev_shutdown")
a82dc19db136 ("net: avoid potential race between netdev_get_by_index_lock() and netns switch")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|
|
sensor_config is not used anywhere and its struct int3472_sensor_config
type also is not declared anywhere, drop it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-5-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
At the moment the atomisp has duplicate code for parsing Intel camera
sensor GPIOS and calling the special 79234640-9e10-4fea-a5c1-b5aa8b19756f
_DSM to get the GPIO type and map it to the sensor.
Export int3472_discrete_parse_crs() so that the atomisp driver can reuse
the INT3472 code for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-4-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The intent is to re-use the INT3472 code for parsing Intel camera sensor
GPIOs and mapping them to the sensor for the atomisp driver, which
currently has duplicate code.
On atomisp devices there is no special INT3472 ACPI device, instead
the Intel _DSM to get the GPIO type is part of the ACPI device for
the sensor itself.
To deal with this the mapping is done from ipu_bridge_init() instead of
from a platform-device probe() function, there is no device to tie
the lifetime of the gpiod_get() calls done by the INT3472 code to.
Switch from devm_gpiod_get() to plain gpiod_get() + explicit gpiod_put()
calls, to prepare for the code being re-used in the atomisp driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-3-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
INTEL_INT3472
Move the common.h header file to include/linux/platform_data/x86/int3472.h
and add a "INTEL_INT3472" kernel-symbol-namespace to the exported symbols.
This is a preparation patch for exporting some more symbols for re-use in
the atomisp driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250507184737.154747-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The function graph infrastructure uses subops of the function tracer.
These are not shown in enabled_functions. Add a "subops:" section to the
enabled_functions line to show what functions are attached via subops. If
the subops is from the function_graph infrastructure, then show the entry
and return callbacks that are attached.
Here's an example of the output:
schedule_on_each_cpu (1) tramp: 0xffffffffc03ef000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 subops: {ent:trace_graph_entry+0x0/0x20 ret:trace_graph_return+0x0/0x150}
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250410153830.5d97f108@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
commit ba47652ba655 ("media: meye: remove this deprecated driver")
removed the meye driver but left behind the code in sony-laptop.c
which that driver used to call.
Remove the sony_pic_camera_command() function, and the set of
defines (SONY_PIC_COMMAND_*) in a header used for the interface
and the static helpers it called.
Cleanup remaining #defines.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250505152558.40526-1-linux@treblig.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Adjust how the CSEE direct call hack is used.
The results of months of testing combined with help from ASUS to
determine the actual cause of suspend issues has resulted in this
refactoring which immensely improves the reliability for devices which
do not have the following minimum MCU FW version:
- ROG Ally X: 313
- ROG Ally 1: 319
For MCU FW versions that match the minimum or above the CSEE hack is
disabled and mcu_powersave set to on by default as there are no
negatives beyond a slightly slower device reinitialization due to the
MCU being powered off.
As this is set only at module load time, it is still possible for
mcu_powersave sysfs attributes to change it at runtime if so desired.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250323023421.78012-3-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Change return type of intel_vsec_register() to int. The current
implementation does not indicate if the register fail or not.
Change to return error code if it fails or if INTEL_VSEC config
is not set. This is a preparation step to introduce a new SSRAM
Telemetry driver that will be using this API.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250425195237.493129-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
SDEI usually initialize with the ACPI table, but on platforms where
ACPI is not used, the SDEI feature can still be used to handle
specific firmware calls or other customized purposes. Therefore, it
is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES.
In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES
in acpi_init()"), to make APEI ready earlier, sdei_init was moved
into acpi_ghes_init instead of being a standalone initcall, adding
ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the
flexibility and usability of SDEI.
This patch corrects the dependency in Kconfig and splits sdei_init()
into two separate functions: sdei_init() and acpi_sdei_init().
sdei_init() will be called by arch_initcall and will only initialize
the platform driver, while acpi_sdei_init() will initialize the
device from acpi_ghes_init() when ACPI is ready. This allows the
initialization of SDEI without ACPI_APEI_GHES enabled.
Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()")
Cc: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Introduce struct vm_struct::requested_size so that the requested
(re)allocation size is retained separately from the allocated area size.
This means that KASAN will correctly poison the correct spans of requested
bytes. This also means we can support growing the usable portion of an
allocation that can already be supported by the existing area's existing
allocation.
Link: https://lkml.kernel.org/r/20250426001105.it.679-kees@kernel.org
Fixes: 3ddc2fefe6f3 ("mm: vmalloc: implement vrealloc()")
Signed-off-by: Kees Cook <kees@kernel.org>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/20250408192503.6149a816@outsider.home/
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Uladzislau Rezki (Sony)" <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Don't have the other users that do things at panic time (the watchdog)
do all this themselves, provide a function to do it.
Also, with the new design where most stuff happens at thread context,
a few things needed to be fixed to avoid doing locking in a panic
context.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
You can't do IPMI calls from the callback, it's called with locks
held.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
XFS will be able to support large atomic writes (atomic write > 1x block)
in future. This will be achieved by using different operating methods,
depending on the size of the write.
Specifically a new method of operation based in FS atomic extent remapping
will be supported in addition to the current HW offload-based method.
The FS method will generally be appreciably slower performing than the
HW-offload method. However the FS method will be typically able to
contribute to achieving a larger atomic write unit max limit.
XFS will support a hybrid mode, where HW offload method will be used when
possible, i.e. HW offload is used when the length of the write is
supported, and for other times FS-based atomic writes will be used.
As such, there is an atomic write length at which the user may experience
appreciably slower performance.
Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
When zero, it means that there is no such performance boundary.
Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
ok for older kernels which don't support this new field, as they would
report 0 in this field (from zeroing in cp_statx()) already. Furthermore
those older kernels don't support large atomic writes - apart from block
fops, but there would be consistent performance there for atomic writes
in range [unit min, unit max].
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
|
|
arch_topology.c provides functionality to parse and scale CPU capacity.
It also provides a corresponding sysfs interface. Some architectures
parse and scale CPU capacity differently as per their own needs. On
Intel processors, for instance, it is responsibility of the Intel
P-state driver.
Relocate the implementation of that interface to a common location in
topology.c. Architectures can use the interface and populate it using
their own mechanisms.
An alternative approach would be to compile arch_topology.c even if
not needed only to get this interface. This approach would create
duplicated and conflicting functionality and data structures.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20250419025504.9760-2-ricardo.neri-calderon@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Doing cpufreq-specific EAS checks that require accessing policy
internals directly from sched_is_eas_possible() is a bit unfortunate,
so introduce cpufreq_ready_for_eas() in cpufreq, move those checks
into that new function and make sched_is_eas_possible() call it.
While at it, address a possible race between the EAS governor check
and governor change by doing the former under the policy rwsem.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/2317800.iZASKD2KPV@rjwysocki.net
|
|
Add a helper for checking if schedutil is the current governor for
a given cpufreq policy and use it in sched_is_eas_possible() to avoid
accessing cpufreq policy internals directly from there.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://patch.msgid.link/3365956.44csPzL39Z@rjwysocki.net
|
|
Add the flag IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and the API function
irq_domain_is_msi_immutable() to check if the MSI controller retains an
immutable address/data pair during irq_set_affinity().
Ensure compatibility with MSI users like PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged after setup. Use this
function to verify if the MSI controller is immutable.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-2-f69b49917464@nxp.com
|
|
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a helper to add a vmalloc region to a bio, abstracting away the
vmalloc addresses from the underlying pages and another one wrapping
it for the simple case where all data fits into a single bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
