| Age | Commit message (Collapse) | Author |
|---|
|
This flag is no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
KVM/riscv changes for 6.8 part #1
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list selftest
- Steal time account support along with selftest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.8
1. Optimization for memslot hugepage checking.
2. Cleanup and fix some HW/SW timer issues.
3. Add LSX/LASX (128bit/256bit SIMD) support.
|
|
Add a tracepoint to log calls to afs_make_call(), including the destination
server address.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Fix the fileserver rotation so that it doesn't use RTT as the basis for
deciding which server and address to use as this doesn't necessarily give a
good indication of the best path. Instead, use the configurable preference
list in conjunction with whatever probes have succeeded at the time of
looking.
To this end, make the following changes:
(1) Keep an array of "server states" to track what addresses we've tried
on each server and move the waitqueue entries there that we'll need
for probing.
(2) Each afs_server_state struct is made to pin the corresponding server's
endpoint state rather than the afs_operation struct carrying a pin on
the server we're currently looking at.
(3) Drop the server list preference; we now always rescan the server list.
(4) afs_wait_for_probes() now uses the server state list to guide it in
what it waits for (and to provide the waitqueue entries) and returns
an indication of whether we'd got a response, run out of responsive
addresses or the endpoint state had been superseded and we need to
restart the iteration.
(5) Call afs_get_address_preferences*() occasionally to refresh the
preference values.
(6) When picking a server, scan the addresses of the servers for which we
have as-yet untested communications, looking for the highest priority
one and use that instead of trying all the addresses for a particular
server in ascending-RTT order.
(7) When a Busy or Offline state is seen across all available servers, do
a short sleep.
(8) If we detect that we accessed a future RO volume version whilst it is
undergoing replication, reissue the op against the older version until
at least half of the servers are replicated.
(9) Whilst RO replication is ongoing, increase the frequency of Volume
Location server checks for that volume to every ten minutes instead of
hourly.
Also add a tracepoint to track progress through the rotation algorithm.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Overhaul the third party-induced invalidation handling, making use of the
previously added volume-level event counters (cb_scrub and cb_ro_snapshot)
that are now being parsed out of the VolSync record returned by the
fileserver in many of its replies.
This allows better handling of RO (and Backup) volumes. Since these are
snapshot of a RW volume that are updated atomically simultantanously across
all servers that host them, they only require a single callback promise for
the entire volume. The currently upstream code assumes that RO volumes
operate in the same manner as RW volumes, and that each file has its own
individual callback - which means that it does a status fetch for *every*
file in a RO volume, whether or not the volume got "released" (volume
callback breaks can occur for other reasons too, such as the volumeserver
taking ownership of a volume from a fileserver).
To this end, make the following changes:
(1) Change the meaning of the volume's cb_v_break counter so that it is
now a hint that we need to issue a status fetch to work out the state
of a volume. cb_v_break is incremented by volume break callbacks and
by server initialisation callbacks.
(2) Add a second counter, cb_v_check, to the afs_volume struct such that
if this differs from cb_v_break, we need to do a check. When the
check is complete, cb_v_check is advanced to what cb_v_break was at
the start of the status fetch.
(3) Move the list of mmap'd vnodes to the volume and trigger removal of
PTEs that map to files on a volume break rather than on a server
break.
(4) When a server reinitialisation callback comes in, use the
server-to-volume reverse mapping added in a preceding patch to iterate
over all the volumes using that server and clear the volume callback
promises for that server and the general volume promise as a whole to
trigger reanalysis.
(5) Replace the AFS_VNODE_CB_PROMISED flag with an AFS_NO_CB_PROMISE
(TIME64_MIN) value in the cb_expires_at field, reducing the number of
checks we need to make.
(6) Change afs_check_validity() to quickly see if various event counters
have been incremented or if the vnode or volume callback promise is
due to expire/has expired without making any changes to the state.
That is now left to afs_validate() as this may get more complicated in
future as we may have to examine server records too.
(7) Overhaul afs_validate() so that it does a single status fetch if we
need to check the state of either the vnode or the volume - and do so
under appropriate locking. The function does the following steps:
(A) If the vnode/volume is no longer seen as valid, then we take the
vnode validation lock and, if the volume promise has expired, the
volume check lock also. The latter prevents redundant checks being
made to find out if a new version of the volume got released.
(B) If a previous RPC call found that the volsync changed unexpectedly
or that a RO volume was updated, then we unmap all PTEs pointing to
the file to stop mmap being used for access.
(C) If the vnode is still seen to be of uncertain validity, then we
perform an FS.FetchStatus RPC op to jointly update the volume status
and the vnode status. This assessment is done as part of parsing the
reply:
If the RO volume creation timestamp advances, cb_ro_snapshot is
incremented; if either the creation or update timestamps changes in
an unexpected way, the cb_scrub counter is incremented
If the Data Version returned doesn't match the copy we have
locally, then we ask for the pagecache to be zapped. This takes
care of handling RO update.
(D) If cb_scrub differs between volume and vnode, the vnode's
pagecache is zapped and the vnode's cb_scrub is updated unless the
file is marked as having been deleted.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
A number of fileserver RPC operations return a VolSync record as part of
their reply that gives some information about the state of the volume being
accessed, including:
(1) A volume Creation timestamp. For an RW volume, this is the time at
which the volume was created; if it changes, the RW volume was
presumably restored from a backup and all cached data should be
scrubbed as Data Version numbers could regress on the files in the
volume.
For an RO volume, this is the time it was last snapshotted from the RW
volume. It is expected to advance each time this happens; if it
regresses, cached data should be scrubbed.
(2) A volume Update timestamp (Auristor only). For an RW volume, this is
updated any time any change is made to a volume or its contents. If
it regresses, all cached data must be scrubbed.
For an RO volume, this is a copy of the RW volume's Update timestamp
at the point of snapshotting. It can be used as a version number when
checking to see if a callback on a RO volume was due to a snapshot.
If it regresses, all cached data must be scrubbed.
but this is currently not made use of by the in-kernel afs filesystem.
Make the afs filesystem use this by:
(1) Add an update time field to the afs_volsync struct and use a value of
TIME64_MIN in both that and the creation time to indicate that they
are unset.
(2) Add creation and update time fields to the afs_volume struct and use
this to track the two timestamps.
(3) Add a volsync_lock mutex to the afs_volume struct to control
modification access for when we detect a change in these values.
(3) Add a 'pre-op volsync' struct to the afs_operation struct to record
the state of the volume tracking before the op.
(4) Add a new counter, cb_scrub, to the afs_volume struct to count events
that require all data to be scrubbed. A copy is placed in the
afs_vnode struct (inode) and if they no longer match, a scrub takes
place.
(5) When the result of an operation is being parsed, parse the VolSync
data too, if it is provided. Note that the two timestamps are handled
separately, since they don't work in quite the same way.
- If the afs_volume tracking is unset, just set it and do nothing
else.
- If the result timestamps are the same as the ones in afs_volume, do
nothing.
- If the timestamps regress, increment cb_scrub if not already done
so.
- If the creation timestamp on a RW volume changes, increment cb_scrub
if not already done so.
- If the creation timestamp on a RO volume advances, update the server
list and see if the current server has been excluded, if so reissue
the op. Once over half of the replication sites have been updated,
increment cb_ro_snapshot to indicate updates may be required and
switch over to excluding unupdated replication sites.
- If the creation timestamp on a Backup volume advances, just
increment cb_ro_snapshot to trigger updates.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Apply server breaks to mmap'd files that are being used from that server
from the call processor work function rather than punting it off to a
workqueue. The work item, afs_server_init_callback(), then bumps each
individual inode off to its own work item introducing a potentially lengthy
delay. This reduces that delay at the cost of extending the amount of time
we delay replying to the CB.InitCallBack3 notification RPC from the server.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Keep a record of the current fileserver endpoint state, including the probe
state, and replace it when a new probe is started rather than just
squelching the old state and overwriting it. Clearance of the old state
can cause a race if there's another thread also currently trying to
communicate with that server.
It appears that this race might be the culprit for some occasions where
kafs complains about invalid data in the RPC reply because the rotation
algorithm fell all the way through without actually issuing an RPC call and
the error return got filled in from the probe state (which has a zero error
recorded). Whatever happens to be in the caller's reply buffer is then
taken as the response.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a volume location server, dispatch them
in order of descending priority to try and get back highest priority one
first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
When probing all the addresses for a fileserver, dispatch them in order of
descending priority to try and get back highest priority one first.
Also add a tracepoint to show the transmission and completion of the
probes.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
This adds a new tracepoint for the ksm advisor. It reports the last scan
time, the new setting of the pages_to_scan parameter and the average cpu
percent usage of the ksmd background thread for the last scan.
Link: https://lkml.kernel.org/r/20231218231054.1625219-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make afs use the netfs write helpers.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a flag whereby a filesystem may request that cifs_perform_write()
perform write-through caching. This involves putting pages directly into
writeback rather than dirty and attaching them to a write operation as we
go.
Further, the writes being made are limited to the byte range being written
rather than whole folios being written. This can be used by cifs, for
example, to deal with strict byte-range locking.
This can't be used with content encryption as that may require expansion of
the write RPC beyond the write being made.
This doesn't affect writes via mmap - those are written back in the normal
way; similarly failed writethrough writes are marked dirty and left to
writeback to retry. Another option would be to simply invalidate them, but
the contents can be simultaneously accessed by read() and through mmap.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a launder_folio implementation for netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Implement support for unbuffered writes and direct I/O writes. If the
write is misaligned with respect to the fscrypt block size, then RMW cycles
are performed if necessary. DIO writes are a special case of unbuffered
writes with extra restriction imposed, such as block size alignment
requirements.
Also provide a field that can tell the code to add some extra space onto
the bounce buffer for use by the filesystem in the case of a
content-encrypted file.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Implement support for unbuffered and DIO reads in the netfs library,
utilising the existing read helper code to do block splitting and
individual queuing. The code also handles extraction of the destination
buffer from the supplied iterator, allowing async unbuffered reads to take
place.
The read will be split up according to the rsize setting and, if supplied,
the ->clamp_length() method. Note that the next subrequest will be issued
as soon as issue_op returns, without waiting for previous ones to finish.
The network filesystem needs to pause or handle queuing them if it doesn't
want to fire them all at the server simultaneously.
Once all the subrequests have finished, the state will be assessed and the
amount of data to be indicated as having being obtained will be
determined. As the subrequests may finish in any order, if an intermediate
subrequest is short, any further subrequests may be copied into the buffer
and then abandoned.
In the future, this will also take care of doing an unbuffered read from
encrypted content, with the decryption being done by the library.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
netfs_read_folio() needs to handle partially-valid pages that are marked
dirty, but not uptodate in the event that someone tries to read a page was
used to cache data by a streaming write.
In such a case, make netfs_read_folio() set up a bvec iterator that points
to the parts of the folio that need filling and to a sink page for the data
that should be discarded and use that instead of i_pages as the iterator to
be written to.
This requires netfs_rreq_unlock_folios() to convert the page into a normal
dirty uptodate page, getting rid of the partial write record and bumping
the group pointer over to folio->private.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Provide a netfs write helper, netfs_perform_write() to buffer data to be
written in the pagecache and mark the modified folios dirty.
It will perform "streaming writes" for folios that aren't currently
resident, if possible, storing data in partially modified folios that are
marked dirty, but not uptodate. It will also tag pages as belonging to
fs-specific write groups if so directed by the filesystem.
This is derived from generic_perform_write(), but doesn't use
->write_begin() and ->write_end(), having that logic rolled in instead.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Dispatch one or more write reqeusts to process a writeback slice, where a
slice is tailored more to logical block divisions within the file (such as
crypto blocks, an object layout or cache granules) than the protocol RPC
maximum capacity.
The dispatch doesn't happen until throttling allows, at which point the
entire writeback slice is processed and queued. A slice may be written to
multiple destinations (one or more servers and the local cache) and the
writes to each destination might be split up along different lines.
The writeback slice holds the required folios pinned. An iov_iter is
provided in netfs_write_request that describes the buffer to be used. This
may be part of the pagecache, may have auxiliary padding pages attached or
may be a bounce buffer resulting from crypto or compression. Consequently,
the filesystem must not twiddle the folio markings directly.
The following API is available to the filesystem:
(1) The ->create_write_requests() method is called to ask the filesystem
to create the requests it needs. This is passed the writeback slice
to be processed.
(2) The filesystem should then call netfs_create_write_request() to create
the requests it needs.
(3) Once a request is initialised, netfs_queue_write_request() can be
called to dispatch it asynchronously, if not completed immediately.
(4) netfs_write_request_completed() should be called to note the
completion of a request.
(5) netfs_get_write_request() and netfs_put_write_request() are provided
to refcount a request. These take constants from the netfs_wreq_trace
enum for logging into ftrace.
(6) The ->free_write_request is method is called to ask the filesystem to
clean up a request.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Make the refcounting of netfs_begin_read() easier to use by not eating the
caller's ref on the netfs_io_request it's given. This makes it easier to
use when we need to look in the request struct after.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Modify the netfs_io_request struct to act as a point around which writes
can be coordinated. It represents and pins a range of pages that need
writing and a list of regions of dirty data in that range of pages.
If RMW is required, the original data can be downloaded into the bounce
buffer, decrypted if necessary, the modifications made, then the modified
data can be reencrypted/recompressed and sent back to the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Limit a subrequest to a maximum size and/or a maximum number of contiguous
physical regions. This permits, for instance, an subreq's iterator to be
limited to the number of DMA'able segments that a large RDMA request can
handle.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Fold the afs_addr_cursor struct into the afs_operation struct and the
afs_vl_cursor struct and fold its operations into their callers also.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Add a tracepoint to track the lifetime of the afs_addr_list struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Change rxrpc's API such that:
(1) A new function, rxrpc_kernel_lookup_peer(), is provided to look up an
rxrpc_peer record for a remote address and a corresponding function,
rxrpc_kernel_put_peer(), is provided to dispose of it again.
(2) When setting up a call, the rxrpc_peer object used during a call is
now passed in rather than being set up by rxrpc_connect_call(). For
afs, this meenat passing it to rxrpc_kernel_begin_call() rather than
the full address (the service ID then has to be passed in as a
separate parameter).
(3) A new function, rxrpc_kernel_remote_addr(), is added so that afs can
get a pointer to the transport address for display purposed, and
another, rxrpc_kernel_remote_srx(), to gain a pointer to the full
rxrpc address.
(4) The function to retrieve the RTT from a call, rxrpc_kernel_get_srtt(),
is then altered to take a peer. This now returns the RTT or -1 if
there are insufficient samples.
(5) Rename rxrpc_kernel_get_peer() to rxrpc_kernel_call_get_peer().
(6) Provide a new function, rxrpc_kernel_get_peer(), to get a ref on a
peer the caller already has.
This allows the afs filesystem to pin the rxrpc_peer records that it is
using, allowing faster lookups and pointer comparisons rather than
comparing sockaddr_rxrpc contents. It also makes it easier to get hold of
the RTT. The following changes are made to afs:
(1) The addr_list struct's addrs[] elements now hold a peer struct pointer
and a service ID rather than a sockaddr_rxrpc.
(2) When displaying the transport address, rxrpc_kernel_remote_addr() is
used.
(3) The port arg is removed from afs_alloc_addrlist() since it's always
overridden.
(4) afs_merge_fs_addr4() and afs_merge_fs_addr6() do peer lookup and may
now return an error that must be handled.
(5) afs_find_server() now takes a peer pointer to specify the address.
(6) afs_find_server(), afs_compare_fs_alists() and afs_merge_fs_addr[46]{}
now do peer pointer comparison rather than address comparison.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS currently uses folio->private to store the range of bytes within a
folio that have been modified - the idea being that if we have, say, a 2MiB
folio and someone writes a single byte, we only have to write back that
single page and not the whole 2MiB folio - thereby saving on network
bandwidth.
Remove this, at least for now, and accept the extra network load (which
doesn't matter in the common case of writing a whole file at a time from
beginning to end).
This makes folio->private available for netfslib to use.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
|
|
Automatically generate trace tag enums from the symbol -> string mapping
tables rather than having the enums as well, thereby reducing duplicated
data.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
checkpatch objects to whitespace before ')', so remove most of it from the
afs trace header.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When debugging timer code the timer tracepoints are very important. There
is no tracepoint when the is_idle flag of the timer base changes. Instead
of always adding manually trace_printk(), add tracepoints which can be
easily enabled whenever required.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-6-anna-maria@linutronix.de
|
|
For starting a timer, the timer is enqueued into a bucket of the timer
wheel. The bucket expiry is the defacto expiry of the timer but it is not
equal the timer expiry because of increasing granularity when bucket is in
a higher level of the wheel. To be able to figure out in a trace whether a
timer expired in time or not, the bucket expiry time is required as well.
Add bucket expiry time to the timer_start tracepoint and thereby simplify
the arguments.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-5-anna-maria@linutronix.de
|
|
Currently, in struct extent_map, we use an unsigned int (32 bits) to
identify the compression type of an extent and an unsigned long (64 bits
on a 64 bits platform, 32 bits otherwise) for flags. We are only using
6 different flags, so an unsigned long is excessive and we can use flags
to identify the compression type instead of using a dedicated 32 bits
field.
We can easily have tens or hundreds of thousands (or more) of extent maps
on busy and large filesystems, specially with compression enabled or many
or large files with tons of small extents. So it's convenient to have the
extent_map structure as small as possible in order to use less memory.
So remove the compression type field from struct extent_map, use flags
to identify the compression type and shorten the flags field from an
unsigned long to a u32. This saves 8 bytes (on 64 bits platforms) and
reduces the size of the structure from 136 bytes down to 128 bytes, using
now only two cache lines, and increases the number of extent maps we can
have per 4K page from 30 to 32. By using a u32 for the flags instead of
an unsigned long, we no longer use test_bit(), set_bit() and clear_bit(),
but that level of atomicity is not needed as most flags are never cleared
once set (before adding an extent map to the tree), and the ones that can
be cleared or set after an extent map is added to the tree, are always
performed while holding the write lock on the extent map tree, while the
reader holds a lock on the tree or tests for a flag that never changes
once the extent map is in the tree (such as compression flags).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit ac3c0d36a2a2 ("btrfs: make fiemap more efficient and accurate
reporting extent sharedness") we no longer need to create special extent
maps during fiemap that have a block start with the EXTENT_MAP_DELALLOC
value. So this block start value for extent maps is no longer used since
then, therefore remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The extent_io_tree is embedded in several structures, notably in struct
btrfs_inode. The fs_info is only used for reporting errors and for
reference in trace points. We can get to the pointer through the inode,
but not all io trees set it. However, we always know the owner and
can recognize if inode is valid. For access helpers are provided, const
variant for the trace points.
This reduces size of extent_io_tree by 8 bytes and following structures
in turn:
- btrfs_inode 1104 -> 1088
- btrfs_device 520 -> 512
- btrfs_root 1360 -> 1344
- btrfs_transaction 456 -> 440
- btrfs_fs_info 3600 -> 3592
- reloc_control 1520 -> 1512
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we abuse the extent_map structure for two purposes:
1) To actually represent extents for inodes;
2) To represent chunk mappings.
This is odd and has several disadvantages:
1) To create a chunk map, we need to do two memory allocations: one for
an extent_map structure and another one for a map_lookup structure, so
more potential for an allocation failure and more complicated code to
manage and link two structures;
2) For a chunk map we actually only use 3 fields (24 bytes) of the
respective extent map structure: the 'start' field to have the logical
start address of the chunk, the 'len' field to have the chunk's size,
and the 'orig_block_len' field to contain the chunk's stripe size.
Besides wasting a memory, it's also odd and not intuitive at all to
have the stripe size in a field named 'orig_block_len'.
We are also using 'block_len' of the extent_map structure to contain
the chunk size, so we have 2 fields for the same value, 'len' and
'block_len', which is pointless;
3) When an extent map is associated to a chunk mapping, we set the bit
EXTENT_FLAG_FS_MAPPING on its flags and then make its member named
'map_lookup' point to the associated map_lookup structure. This means
that for an extent map associated to an inode extent, we are not using
this 'map_lookup' pointer, so wasting 8 bytes (on a 64 bits platform);
4) Extent maps associated to a chunk mapping are never merged or split so
it's pointless to use the existing extent map infrastructure.
So add a dedicated data structure named 'btrfs_chunk_map' to represent
chunk mappings, this is basically the existing map_lookup structure with
some extra fields:
1) 'start' to contain the chunk logical address;
2) 'chunk_len' to contain the chunk's length;
3) 'stripe_size' for the stripe size;
4) 'rb_node' for insertion into a rb tree;
5) 'refs' for reference counting.
This way we do a single memory allocation for chunk mappings and we don't
waste memory for them with unused/unnecessary fields from an extent_map.
We also save 8 bytes from the extent_map structure by removing the
'map_lookup' pointer, so the size of struct extent_map is reduced from
144 bytes down to 136 bytes, and we can now have 30 extents map per 4K
page instead of 28.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This patch adds to support tracepoint for f2fs_vm_page_mkwrite(),
meanwhile it prints more details for trace_f2fs_filemap_fault().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
All platforms with a kernel irqchip have support for irqfd. Unify the
two configuration items so that userspace can expect to use irqfd to
inject interrupts into the irqchip.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size. It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.
The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.
To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.
mount -t 9p -o trans=virtio <mount_tag> <mount_path>
The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.
/* from include/net/9p/9p.h */
struct p9_fcall {
u32 size;
u8 id;
u16 tag;
size_t offset;
size_t capacity;
struct kmem_cache *cache;
u8 *sdata;
bool zc;
};
tracepoint:9p:9p_protocol_dump
{
/* out of bounds read can happen when this tracepoint is enabled */
}
rawtracepoint:9p_protocol_dump
{
$pdu = (struct p9_fcall *)arg1;
$dump_sz = (uint64)32;
if ($dump_sz > $pdu->capacity) {
printf("reading %zu bytes from src buffer of %zu bytes\n",
$dump_sz, $pdu->capacity);
}
}
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com>
Fixes: 60ece0833b6c ("net/9p: allocate appropriate reduced message buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This patch supports to show i_mode field in trace_f2fs_new_inode().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds tracepoints for f2fs_rename().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Fix RTT determination to be able to use any type of ACK as the response
from which RTT can be calculated provided its ack.serial is non-zero and
matches the serial number of an outgoing DATA or ACK packet. This
shouldn't be limited to REQUESTED-type ACKs as these can have other types
substituted for them for things like duplicate or out-of-order packets.
Fixes: 4700c4d80b7b ("rxrpc: Fix loss of RTT samples due to interposed ACK")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tracing the runtime delta makes sense, observer can sum over time.
Tracing the absolute vruntime makes less sense, inconsistent:
absolute-vs-delta, but also vruntime delta can be computed from
runtime delta.
Removing the vruntime thing also makes the two tracepoint sites
identical, allowing to unify the code in a later patch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- asus-wmi: Support for screenpad and solve brightness key press
duplication
- int3472: Eliminate the last use of deprecated GPIO functions
- mlxbf-pmc: New HW support
- msi-ec: Support new EC configurations
- thinkpad_acpi: Support reading aux MAC address during passthrough
- wmi: Fixes & improvements
- x86-android-tablets: Detection fix and avoid use of GPIO private APIs
- Debug & metrics interface improvements
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (80 commits)
platform/x86: inspur-platform-profile: Add platform profile support
platform/x86: thinkpad_acpi: Add battery quirk for Thinkpad X120e
platform/x86: wmi: Decouple WMI device removal from wmi_block_list
platform/x86: wmi: Fix opening of char device
platform/x86: wmi: Fix probe failure when failing to register WMI devices
platform/x86: wmi: Fix refcounting of WMI devices in legacy functions
platform/x86: wmi: Decouple probe deferring from wmi_block_list
platform/x86/amd/hsmp: Fix iomem handling
platform/x86: asus-wmi: Do not report brightness up/down keys when also reported by acpi_video
platform/x86: thinkpad_acpi: replace deprecated strncpy with memcpy
tools/power/x86/intel-speed-select: v1.18 release
tools/power/x86/intel-speed-select: Use cgroup isolate for CPU 0
tools/power/x86/intel-speed-select: Increase max CPUs in one request
tools/power/x86/intel-speed-select: Display error for core-power support
tools/power/x86/intel-speed-select: No TRL for non compute domains
tools/power/x86/intel-speed-select: turbo-mode enable disable swapped
tools/power/x86/intel-speed-select: Update help for TRL
tools/power/x86/intel-speed-select: Sanitize integer arguments
platform/x86: acer-wmi: Remove void function return
platform/x86/amd/pmc: Add dump_custom_stb module parameter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP and CPU hotplug updates from Thomas Gleixner:
- Switch the smp_call_function*() @csd argument to call_single_data_t
type, which is a cache-line aligned typedef of the underlying struct
__call_single_data.
This ensures that the call data is not crossing a cacheline which
avoids bouncing an extra cache-line for the SMP function call
- Prevent offlining of the last housekeeping CPU when CPU isolation is
active.
Offlining the last housekeeping CPU makes no sense in general, but
also caused the scheduler to panic due to the empty CPU mask when
rebuilding the scheduler domains.
- Remove an unused CPU hotplug state
* tag 'smp-core-2023-10-29-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Don't offline the last non-isolated CPU
cpu/hotplug: Remove unused cpuhp_state CPUHP_AP_X86_VDSO_VMA_ONLINE
smp: Change function signatures to use call_single_data_t
|
