| Age | Commit message (Collapse) | Author |
|---|
|
KHO allocates metadata for its preserved memory map using the slab
allocator via kzalloc(). This metadata is temporary and is used by the
next kernel during early boot to find preserved memory.
A problem arises when KFENCE is enabled. kzalloc() calls can be randomly
intercepted by kfence_alloc(), which services the allocation from a
dedicated KFENCE memory pool. This pool is allocated early in boot via
memblock.
When booting via KHO, the memblock allocator is restricted to a "scratch
area", forcing the KFENCE pool to be allocated within it. This creates a
conflict, as the scratch area is expected to be ephemeral and
overwriteable by a subsequent kexec. If KHO metadata is placed in this
KFENCE pool, it leads to memory corruption when the next kernel is loaded.
To fix this, modify KHO to allocate its metadata directly from the buddy
allocator instead of slab.
Link: https://lkml.kernel.org/r/20251021000852.2924827-4-pasha.tatashin@soleen.com
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Matlack <dmatlack@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page cache folios from a file system that support large block size (LBS)
can have minimal folio order greater than 0, thus a high order folio might
not be able to be split down to order-0. Commit e220917fa507 ("mm: split
a folio in minimum folio order chunks") bumps the target order of
split_huge_page*() to the minimum allowed order when splitting a LBS
folio. This causes confusion for some split_huge_page*() callers like
memory failure handling code, since they expect after-split folios all
have order-0 when split succeeds but in reality get min_order_for_split()
order folios and give warnings.
Fix it by failing a split if the folio cannot be split to the target
order. Rename try_folio_split() to try_folio_split_to_order() to reflect
the added new_order parameter. Remove its unused list parameter.
[The test poisons LBS folios, which cannot be split to order-0 folios, and
also tries to poison all memory. The non split LBS folios take more
memory than the test anticipated, leading to OOM. The patch fixed the
kernel warning and the test needs some change to avoid OOM.]
Link: https://lkml.kernel.org/r/20251017013630.139907-1-ziy@nvidia.com
Fixes: e220917fa507 ("mm: split a folio in minimum folio order chunks")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: syzbot+e6367ea2fdab6ed46056@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d2c943.a70a0220.1b52b.02b3.GAE@google.com/
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
|
|
Correct and add to adis.h to resolve all kernel-doc warnings:
- add a missing struct member description
- change one non-kernel-doc comment to use /* instead of /**
- correct function parameter @value to @val (7 locations)
- add function return value comments (13 locations)
Warning: include/linux/iio/imu/adis.h:97 struct member 'has_fifo'
not described in 'adis_data'
Warning: include/linux/iio/imu/adis.h:139 Incorrect use of kernel-doc
format: * The state_lock is meant to be used during operations that
require
Warning: include/linux/iio/imu/adis.h:158 struct member '"__adis_"'
not described in 'adis'
Warning: include/linux/iio/imu/adis.h:264 function parameter 'val'
not described in 'adis_write_reg'
Warning: include/linux/iio/imu/adis.h:371 No description found for
return value of 'adis_update_bits_base'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the device in switchdev mode, the RDMA device manages all the
vports which belong to its representors, which can lead to a situation
where the PF that is used to manage the RDMA device isn't the native PF
of some of the vports it manages.
Add infrastructure to allow the master PF to manage all the hardware
resources for the vports under its management.
Whereas currently the only such resource is RDMA TRANSPORT steering
domains.
That is done by adding new FW argument other_eswitch which is passed by
the driver to the FW to allow the master PF to properly manage vports
belonging to other native PF.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add mlx5_fs_set_root_dev() function which swaps the root namespace
core device with another one for a given table_type.
It is intended for usage only by RDMA_TRANSPORT tables in case of LAG
configuration, to allow the creation of tables during LAG always
through the LAG master device, which is valid since during LAG the
master is allowed to manage the RDMA_TRANSPORT tables of its slaves.
In addition move the table_type enum to global include to allow its use
in a downstream patch in the RDMA driver.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251029-support-other-eswitch-v1-3-98bb707b5d57@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add other_eswitch support which allows flow tables creation above vports
that reside on different esw managers.
The new flag MLX5_FLOW_TABLE_OTHER_ESWITCH indicates if the
esw_owner_vhca_id attribute is supported.
Note that this is only supported if the Advanced-RDMA cap-
rdma_transport_manager_other_eswitch is set.
And it is the caller responsibility to check that.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251029-support-other-eswitch-v1-2-98bb707b5d57@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add OTHER_ESWITCH capabilities which includes other_eswitch and
eswitch_owner_vhca_id to all steering objects.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251029-support-other-eswitch-v1-1-98bb707b5d57@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Expose pcie_tph_get_st_table_loc() to be used by drivers as will be done
in the next patch from the series.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20251027-st-direct-mode-v1-1-e0ad953866b6@nvidia.com
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Move the VCHIQ headers from drivers/staging/vc04_services/include to
include/linux/raspberrypi
This is done so that they can be shared between the VCHIQ interface
(which is going to be de-staged in a subsequent commit from staging) and
the VCHIQ drivers left in the staging/vc04_services (namely
bcm2835-audio, bcm2835-camera).
The include/linux/raspberrypi/ provides a central location to serve both of
these areas.
Co-developed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Link: https://patch.msgid.link/20251029-vchiq-destage-v3-4-da8d6c83c2c5@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Markus Probst <markus.probst@posteo.de> says:
This series adds support for power resources defined in acpi on ata
ports/devices. A device can define a power resource in an ata port/device,
which then gets powered on right before the port is probed. This can be
useful for devices, which have sata power connectors that are:
a: powered down by default
b: can be individually powered on
like in some synology nas devices. If thats the case it will be assumed,
that the power resource won't survive reboots and therefore the disk will
be stopped.
Link: https://patch.msgid.link/20251104142413.322347-1-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In addition to the already existing manage_shutdown,
manage_system_start_stop and manage_runtime_start_stop device scsi_disk
attributes, add manage_restart, which allows the high-level device
driver (sd) to manage the device power state for SYSTEM_RESTART if set
to 1.
This attribute is necessary for the following commit "ata: stop disk on
restart if ACPI power resources are found" to avoid a potential disk
power failure in the case the SATA power connector does not retain the
power state after a restart.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Markus Probst <markus.probst@posteo.de>
Link: https://patch.msgid.link/20251104142413.322347-2-markus.probst@posteo.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-06 (i40, ice, iavf)
Mohammad Heib introduces a new devlink parameter, max_mac_per_vf, for
controlling the maximum number of MAC address filters allowed by a VF. This
allows administrators to control the VF behavior in a more nuanced manner.
Aleksandr and Przemek add support for Receive Side Scaling of GTP to iAVF
for VFs running on E800 series ice hardware. This improves performance and
scalability for virtualized network functions in 5G and LTE deployments.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
iavf: add RSS support for GTP protocol via ethtool
ice: Extend PTYPE bitmap coverage for GTP encapsulated flows
ice: improve TCAM priority handling for RSS profiles
ice: implement GTP RSS context tracking and configuration
ice: add virtchnl definitions and static data for GTP RSS
ice: add flow parsing for GTP and new protocol field support
i40e: support generic devlink param "max_mac_per_vf"
devlink: Add new "max_mac_per_vf" generic device param
====================
Link: https://patch.msgid.link/20251106225321.1609605-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a driver api for reporting device statistics required by the
"Implementation Requirements" section of the PSP Architecture
Specification. Use a warning to ensure drivers report stats required
by the spec.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Track and report stats common to all psp devices from the core. A
'stale-event' is when the core marks the rx state of an active
psp_assoc as incapable of authenticating psp encapsulated data.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251106002608.1578518-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All three members are effectively of type bool, so make this explicit
and shrink size of struct fixed_phy_status.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9eca3d7e-fa64-4724-8fdc-f2c1a8f2ae8f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Open Alliance TC14 (OATC14) 10BASE-T1S PHYs cable
diagnostic feature.
This patch implements:
- genphy_c45_oatc14_cable_test_start() to initiate a cable test
- genphy_c45_oatc14_cable_test_get_status() to retrieve test results
- Helper function to map PHY cable test status to ethtool result codes
- Function declarations and exports for use by PHY drivers
This enables ethtool to report ok, open, short, and undetectable cable
conditions on OATC14 10Base-T1S PHYs.
Open Alliance TC14 10BASE-T1S Advanced Diagnostic PHY Features
Specification ref:
https://opensig.org/wp-content/uploads/2025/06/OPEN_Alliance_10BASE-T1S_Advanced_PHY_features_for-automotive_Ethernet_V2.1b.pdf
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Link: https://patch.msgid.link/20251105051213.50443-2-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TCP SACK compression has been added in 2018 in commit
5d9f4262b7ea ("tcp: add SACK compression").
It is working great for WAN flows (with large RTT).
Wifi in particular gets a significant boost _when_ ACK are suppressed.
Add a new sysctl so that we can tune the very conservative 5 % value
that has been used so far in this formula, so that small RTT flows
can benefit from this feature.
delay = min ( 5 % of RTT, 1 ms)
This patch adds new tcp_comp_sack_rtt_percent sysctl
to ease experiments and tuning.
Given that we cap the delay to 1ms (tcp_comp_sack_delay_ns sysctl),
set the default value to 33 %.
Quoting Neal Cardwell ( https://lore.kernel.org/netdev/CADVnQymZ1tFnEA1Q=vtECs0=Db7zHQ8=+WCQtnhHFVbEOzjVnQ@mail.gmail.com/ )
The rationale for 33% is basically to try to facilitate pipelining,
where there are always at least 3 ACKs and 3 GSO/TSO skbs per SRTT, so
that the path can maintain a budget for 3 full-sized GSO/TSO skbs "in
flight" at all times:
+ 1 skb in the qdisc waiting to be sent by the NIC next
+ 1 skb being sent by the NIC (being serialized by the NIC out onto the wire)
+ 1 skb being received and aggregated by the receiver machine's
aggregation mechanism (some combination of LRO, GRO, and sack
compression)
Note that this is basically the same magic number (3) and the same
rationales as:
(a) tcp_tso_should_defer() ensuring that we defer sending data for no
longer than cwnd/tcp_tso_win_divisor (where tcp_tso_win_divisor = 3),
and
(b) bbr_quantization_budget() ensuring that cwnd is at least 3 GSO/TSO
skbs to maintain pipelining and full throughput at low RTTs
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251106115236.3450026-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 54a378f43425 ("tcp: add the ability to control
max RTO"), TFO SYN+ACK RTO is capped by the TFO full sk's
inet_csk(sk)->icsk_rto_max.
The value is inherited from the parent listener.
Let's apply the same cap to non-TFO SYN+ACK.
Note that req->rsk_listener is always non-NULL when we call
tcp_reqsk_timeout() in reqsk_timer_handler() or tcp_check_req().
It could be NULL for SYN cookie req, but we do not use
req->timeout then.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
reqsk_timeout() is always called with @timeout being TCP_RTO_MAX.
Let's remove the arg.
As a prep for the next patch, reqsk_timeout() is moved to tcp.h
and renamed to tcp_reqsk_timeout().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
inet_csk_reqsk_queue_hash_add() is no longer shared by DCCP.
We do not need to pass req->timeout down to reqsk_queue_hash_req().
Let's move tcp_timeout_init() from tcp_conn_request() to
reqsk_queue_hash_req().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since DCCP has been removed, we do not need to use
request_sock_ops.syn_ack_timeout().
Let's call tcp_syn_ack_timeout() directly.
Now other function pointers of request_sock_ops are
protocol-dependent.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
|
|
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Introduce the function bdev_zone_start() as a more explicit (and clear)
replacement for ALIGN_DOWN() to get the start sector of a zone
containing a particular sector of a zoned block device.
Use this new helper in blkdev_get_zone_info() and
blkdev_report_zones_cached().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
|
|
!CONFIG_GENERIC_ARCH_TOPOLOGY
The arm_pmu driver is using topology_core_has_smt() for retrieving
the SMT implementation which depends on CONFIG_GENERIC_ARCH_TOPOLOGY.
The config is optional on arm platforms so provide a
!CONFIG_GENERIC_ARCH_TOPOLOGY stub for topology_core_has_smt().
Fixes: c3d78c34ad00 ("perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511041757.vuCGOmFc-lkp@intel.com/
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyccccc@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There may be console drivers that have not yet figured out a way
to implement safe atomic printing (->write_atomic() callback).
These drivers could choose to only implement threaded printing
(->write_thread() callback), but then it is guaranteed that _no_
output will be printed during panic. Not even attempted.
As a result, developers may be tempted to implement unsafe
->write_atomic() callbacks and/or implement some sort of custom
deferred printing trickery to try to make it work. This goes
against the principle intention of the nbcon API as well as
endangers other nbcon drivers that are doing things correctly
(safely).
As a compromise, allow nbcon drivers to implement unsafe
->write_atomic() callbacks by providing a new console flag
CON_NBCON_ATOMIC_UNSAFE. When specified, the ->write_atomic()
callback for that console will _only_ be called during the
final "hope and pray" flush attempt at the end of a panic:
nbcon_atomic_flush_unsafe().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/lkml/b2qps3uywhmjaym4mht2wpxul4yqtuuayeoq4iv4k3zf5wdgh3@tocu6c7mj4lt
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/all/swdpckuwwlv3uiessmtnf2jwlx3jusw6u7fpk5iggqo4t2vdws@7rpjso4gr7qp/ [1]
Link: https://lore.kernel.org/all/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org/ [2]
Link: https://patch.msgid.link/20251027161212.334219-2-john.ogness@linutronix.de
[pmladek@suse.com: Fix build with rework/nbcon-in-kdb branch.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
This commit adds the SRCU_READ_FLAVOR_FAST_UPDOWN=0x8 macro
and adjusts rcutorture to make use of it. In this commit, both
SRCU_READ_FLAVOR_FAST=0x4 and the new SRCU_READ_FLAVOR_FAST_UPDOWN
test SRCU-fast. When the SRCU-fast-updown is added, the new
SRCU_READ_FLAVOR_FAST_UPDOWN macro will test it when passed to the
rcutorture.reader_flavor module parameter.
The old SRCU_READ_FLAVOR_FAST macro's value changed from 0x8 to 0x4.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
The upcoming Rust abstraction layer for the PWM subsystem uses a custom
`dev->release` handler to safely manage the lifetime of its driver
data.
To prevent leaking the memory of the `struct pwm_chip` (allocated by
`pwmchip_alloc`), this custom handler must also call the original
`pwmchip_release` function to complete the cleanup.
Make `pwmchip_release` a global, exported function so that it can be
called from the Rust FFI bridge. This involves removing the `static`
keyword, adding a prototype to the public header, and exporting the
symbol.
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://patch.msgid.link/20251016-rust-next-pwm-working-fan-for-sending-v16-1-a5df2405d2bd@samsung.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
We want to expand usage of sheaves to all non-boot caches, including
kmalloc caches. Since sheaves themselves are also allocated by
kmalloc(), we need to prevent excessive or infinite recursion -
depending on sheaf size, the sheaf can be allocated from smaller, same
or larger kmalloc size bucket, there's no particular constraint.
This is similar to allocating the objext arrays so let's just reuse the
existing mechanisms for those. __GFP_NO_OBJ_EXT in alloc_empty_sheaf()
will prevent a nested kmalloc() from allocating a sheaf itself - it will
either have sheaves already, or fallback to a non-sheaf-cached
allocation (so bootstrap of sheaves in a kmalloc cache that allocates
sheaves from its own size bucket is possible). Additionally, reuse
OBJCGS_CLEAR_MASK to clear unwanted gfp flags from the nested
allocation.
Link: https://patch.msgid.link/20251105-sheaves-cleanups-v1-5-b8218e1ac7ef@suse.cz
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19-rc1:
UAPI Changes:
- Add userptr support to ivpu.
- Add IOCTL's for resource and telemetry data in amdxdna.
Core Changes:
- Improve some atomic state checking handling.
- drm/client updates.
- Use forward declarations instead of including drm_print.h
- RUse allocation flags in ttm_pool/device_init and allow specifying max
useful pool size and propagate ENOSPC.
- Updates and fixes to scheduler and bridge code.
- Add support for quirking DisplayID checksum errors.
Driver Changes:
- Assorted cleanups and fixes in rcar-du, accel/ivpu, panel/nv3052cf,
sti, imxm, accel/qaic, accel/amdxdna, imagination, tidss, sti,
panthor, vkms.
- Add Samsung S6E3FC2X01 DDIC/AMS641RW, Synaptics TDDI series DSI,
TL121BVMS07-00 (IL79900A) panels.
- Add mali MediaTek MT8196 SoC gpu support.
- Add etnaviv GC8000 Nano Ultra VIP r6205 support.
- Document powervr ge7800 support in the devicetree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/5afae707-c9aa-4a47-b726-5e1f1aa7a106@linux.intel.com
|
|
The blk-mq dma iterator has an optimization for requests that align to
the device's iommu merge boundary. This boundary may be larger than the
device's virtual boundary, but the code had been depending on that queue
limit to know ahead of time if the request is guaranteed to align to
that optimization.
Rather than rely on that queue limit, which many devices may not report,
save the lowest set bit of any boundary gap between each segment in the
bio while checking the segments. The request stores the value for
merging and quickly checking per io if the request can use iova
optimizations.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move NETDEV_XDP_ACT_ZC into xdp_sock_drv.h header such that external code
can reuse it, and rename it into more generic NETDEV_XDP_ACT_XSK.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: David Wei <dw@davidwei.uk>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251031212103.310683-7-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.19:
Features and functionality:
- Enable LNL+ content adaptive sharpness filter (CASF) (Nemesa)
- Use optimized VRR guardband (Ankit, Ville)
- Enable Xe3p LT PHY (Suraj)
- Enable FBC support for Xe3p_LPD display (Sai Teja, Vinod)
- Specify DMC firmware for display version 30.02 (Dnyaneshwar)
- Report reason for disabling PSR to debugfs (Michał)
- Extend i915_display_info with Type-C port details (Khaled)
- Log DSI send packet sequence errors and contents
Refactoring and cleanups:
- Refactoring to prepare for VRR guardband optimization (Ankit)
- Abstract VRR live status wait (Ankit)
- Refactor VRR and DSB timing to handle Set Context Latency explicitly (Ankit)
- Helpers for prefill latency calculations (Ville)
- Refactor SKL+ watermark latency setup (Ville)
- VRR refactoring and cleanups (Ville)
- SKL+ universal plane cleanups (Ville)
- Decouple CDCLK from state->modeset refactor (Ville)
- Refactor VLV/CHV clock functions (Jani)
- Refactor fbdev handling (Jani)
- Call i915 and xe runtime PM from display via function pointers (Jouni)
- IRQ code refactoring (Jani)
- Drop display dependency on i915 feature check macros (Jani)
- Refactor and unify i915 and xe stolen memory interfaces towards display (Jani)
- Switch to driver agnostic drm to display pointer chase (Jani)
- Use display version over graphics version in display code (Matt A)
- GVT cleanups (Jonathan, Andi)
- Rename a VLV clock function to unify (Michał)
- Explicitly sanitize DMC package header num entries (Luca)
- Remove redundant port clock check from ALPM (Jouni)
- Use sysfs_emit() instead of sprintf() in PMU sysfs (Madhur Kumar)
- Clean up C20 PHY PLL register macros (Imre, Mika))
- Abstract "address in MMIO table" helper for general use (Matt A)
- Improve VRR platform abstractions (Ville)
- Move towards more standard PCI PM code usage (Ville)
- Framebuffer refactoring (Ville)
- Drop display dependency on i915_utils.h (Jani)
- Include cleanups (Jani)
Fixes:
- Workaround docking station DSC issues with high pixel clock and bpp (Imre)
- Fix Panel Replay in DSC mode (Imre)
- Disable tracepoints for PREEMPT_RT as a workaround (Maarten)
- Fix intel_crtc_get_vblank_counter() on PREEMPT_RT (Maarten)
- Fix C10 PHY identification on PTL/WCL (Dnyaneshwar)
- Take AS SDP into account with optimized guardband (Jouni)
- Fix panic structure allocation memory leak (Jani)
- Adjust an FBC workaround platforms (Vinod)
- Add fallback for CDCLK selection (Naladala)
- Avoid using invalid transcoder in MST transport select (Suraj)
- Don't use cursor size reduction on display version 14+ (Nemesa)
- Fix C20 PHY PLL register programming (Imre, Mika)
- Fix PSR frontbuffer flush handling (Jouni)
- Store ALPM parameters in crtc state (Jouni)
- Defeature DRRS on LNL+ (Ville)
- Fix the scope of the large DRAM DIMM workaround (Ville)
- Fix PICA vs. AUX power ordering issue (Gustavo)
- Fix pixel rate for computing watermark line time (Ville)
- Fix framebuffer set_tiling vs. addfb race (Ville)
- DMC event handler fixes (Ville)
DRM Core:
- CRTC sharpness strength property (Nemesa)
- DPCD DSC quirk for Synaptics Panamera devices (Imre)
- Helpers to query the branch DSC max throughput/line-width (Imre)
Merges:
- Backmerge drm-next for v6.18-rc and to sync with drm-xe-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ec5a05f2df6d597a62033ee2d57225cce707b320@intel.com
|
|
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4ab7 ("block: introduce blkdev_report_zones_cached()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies
sched:
- Fix deadlock
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251106131244.GA155679@2a02-2454-fd5e-fd00-d540-1fd5-75b4-d5e2.dyn6.pyur.net
|
|
cgroup_task_dead() is called from finish_task_switch() which runs with
preemption disabled and doesn't allow scheduling even on PREEMPT_RT. The
function needs to acquire css_set_lock which is a regular spinlock that can
sleep on RT kernels, leading to "sleeping function called from invalid
context" warnings.
css_set_lock is too large in scope to convert to a raw_spinlock. However,
the unlinking operations don't need to run synchronously - they just need
to complete after the task is done running.
On PREEMPT_RT, defer the work through irq_work. While the work doesn't need
to happen immediately, it can't be delayed indefinitely either as the dead
task pins the cgroup and task_struct can be pinned indefinitely. Use the
lazy version of irq_work to allow batching and lower impact while ensuring
timely completion.
v2: Use IRQ_WORK_INIT_LAZY instead of immediate irq_work and add explanation
for why the work can't be delayed indefinitely (Sebastian Andrzej Siewior).
Fixes: d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20251104181114.489391-1-calvin@wbinvd.org
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add virtchnl protocol header and field definitions for advanced RSS
configuration including GTPC, GTPU, L2TPv2, ECPRI, PPP, GRE, and IP
fragment headers.
- Define new virtchnl protocol header types
- Add RSS field selectors for tunnel protocols
- Extend static mapping arrays for protocol field matching
- Add L2TPv2 session ID and length+session ID field support
This provides the foundational definitions needed for VF RSS
configuration of tunnel protocols.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Co-developed-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for a new DSA tagging protocol driver for the MaxLinear
GSW1xx switch family. The GSW1xx switches use a proprietary 8-byte
special tag inserted between the source MAC address and the EtherType
field to indicate the source and destination ports for frames
traversing the CPU port.
Implement the tag handling logic to insert the special tag on transmit
and parse it on receive.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/0e973ebfd9433c30c96f50670da9e9449a0d98f2.1762170107.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new device generic parameter to controls the maximum
number of MAC filters allowed per VF.
For example, to limit a VF to 3 MAC addresses:
$ devlink dev param set pci/0000:3b:00.0 name max_mac_per_vf \
value 3 \
cmode runtime
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Some of the new field added to socinfo structure with version 21, 22
and 23 which is only used by boot firmware and it is of no use for
Linux.Add reserve field in socinfo so that the structure remain
updated and prepared if we get any new field in future which could
be used by Linux. While at it, also updates switch case for backward
compatibility if the SoC runs with boot firmware which has these
new version added.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add support for socinfo version 20. Version 20 adds a new field
package id and its zeroth bit contain information that can be
can be used to tune temperature thresholds on devices which might
be able to withstand higher temperatures. Zeroth bit value 1 means
that its heat dissipation is better and more relaxed thermal
scheme can be put in place and 0 means a more aggressive scheme
may be needed.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251104130906.167666-1-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"This is a work-around for a (now fixed) corner case in the arm32 build
with Clang KCFI enabled.
- Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)"
* tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
libeth: xdp: Disable generic kCFI pass for libeth_xdp_tx_xmit_bulk()
ARM: Select ARCH_USES_CFI_GENERIC_LLVM_PASS
compiler_types: Introduce __nocfi_generic
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec524 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c433 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c0063 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
To facilitate tracking the length, type, and outcome of the move extent,
add a trace point at both the entry and exit of mext_move_extent().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-13-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
In the iomap_write_iter(), the iomap buffered write frame does not hold
any locks between querying the inode extent mapping info and performing
page cache writes. As a result, the extent mapping can be changed due to
concurrent I/O in flight. Similarly, in the iomap_writepage_map(), the
write-back process faces a similar problem: concurrent changes can
invalidate the extent mapping before the I/O is submitted.
Therefore, both of these processes must recheck the mapping info after
acquiring the folio lock. To address this, similar to XFS, we propose
introducing an extent sequence number to serve as a validity cookie for
the extent. After commit 24b7a2331fcd ("ext4: clairfy the rules for
modifying extents"), we can ensure the extent information should always
be processed through the extent status tree, and the extent status tree
is always uptodate under i_rwsem or invalidate_lock or folio lock, so
it's safe to introduce this sequence number. The sequence number will be
increased whenever the extent status tree changes, preparing for the
buffered write iomap conversion.
Besides, this mechanism is also applicable for the moving extents case.
In move_extent_per_page(), it also needs to reacquire data_sem and check
the mapping info again under the folio lock.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20251013015128.499308-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
