| Age | Commit message (Collapse) | Author |
|---|
|
The ability to emulate a host bridge is useful not only for hardware PCI
controllers like CONFIG_VMD, or virtual PCI controllers like
CONFIG_PCI_HYPERV, but also for test and development scenarios like
CONFIG_SAMPLES_DEVSEC [1].
One stumbling block for defining CONFIG_SAMPLES_DEVSEC, a sample
implementation of a platform TSM for PCI Device Security, is the need to
accommodate PCI_DOMAINS_GENERIC architectures alongside x86 [2].
In support of supplementing the existing CONFIG_PCI_BRIDGE_EMUL
infrastructure for host bridges:
* Introduce pci_bus_find_emul_domain_nr() as a common way to find a free
PCI domain number whether that is to reuse the existing dynamic
allocation code in the !ACPI case, or to assign an unused domain above
the last ACPI segment.
* Convert pci-hyperv to the new allocator so that the PCI core can
unconditionally assume that bridge->domain_nr != PCI_DOMAIN_NR_NOT_SET
is the dynamically allocated case.
A follow on patch can also convert vmd to the new scheme. Currently vmd is
limited to CONFIG_PCI_DOMAINS_GENERIC=n (x86) so, unlike pci-hyperv, it
does not immediately conflict with this new pci_bus_find_emul_domain_nr()
mechanism.
Link: http://lore.kernel.org/174107249038.1288555.12362100502109498455.stgit@dwillia2-xfh.jf.intel.com [1]
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Closes: http://lore.kernel.org/20250311144601.145736-3-suzuki.poulose@arm.com [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20251024224622.1470555-2-dan.j.williams@intel.com
|
|
A later commit will reduce the size of the RCU watching counter to free up
some bits for another purpose. Paul suggested adding a config option to
test the extreme case where the counter is reduced to its minimum usable
width for rcutorture to poke at, so do that.
Make it only configurable under RCU_EXPERT. While at it, add a comment to
explain the layout of context_tracking->state.
Link: http://lore.kernel.org/r/4c2cb573-168f-4806-b1d9-164e8276e66a@paulmck-laptop
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add keycodes for hotkeys toggling the electronic privacy screen found on
some laptops on/off.
There already is an API for eprivacy screens as kernel-mode-setting drm
connector object properties:
https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
this API also supports reporting when the eprivacy screen is turned on/off
by the embedded-controller (EC) in response to hotkey presses.
But on some laptops (e.g. the Dell Latitude 7300) the firmware does not
allow querying the presence nor the status of the eprivacy screen at boot.
This makes it impossible to implement the drm connector properties API
since drm objects do not allow adding new properties after creation and
the presence of the eprivacy cannot be detected at boot.
The first notice of the presence of an eprivacy screen on these laptops is
an EC generated (WMI) event when the eprivacy screen hotkeys are pressed.
In this case the new keycodes this change adds can be generated to notify
userspace of the eprivacy screen on/off hotkeys being pressed, so that
userspace can show the usual on-screen-display (OSD) notification for eprivacy
screen on/off to the user. This is similar to how e.g. touchpad on/off
keycodes are used to show the touchpad on/off OSD.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52c2 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Until now, all products with an amplifier supported by the cs35l56 driver
have shipped with Microsoft Windows pre-installed. The factory calibration
of speaker protection has therefore been done using the Windows driver.
However, products that ship with a Linux-based distro must be able to
perform the factory calibration procedure from within the Linux-based
environment. This patch series adds that support.
NOTE: unfortunately this is yet another series that is mainly ASoC but
also needs some changes to the HDA driver, and they have build dependencies
on the ASoC code. I suggest taking this all through Mark's tree and we'll
avoid sending any other commits to the HDA driver until it has all landed
in Takashi's tree.
|
|
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.7f13a2adc5eb.I01b5af0363869864b0580d9c2a1770bafab69566@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of
a zoned block device to the explicitly open condition
(BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write
operation.
Change this operation code to be an odd number to reflect this. The
following operation numbers are changed to keep the numbering compact.
No problems were reported without this change as this operation has no
data. However, this unifies the zone operation to reflect that they
modify the device state and also allows strengthening checks in the
block layer, e.g. checking if this operation is not issued against a
read-only device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
|
|
Implement balance ID support for multiplane LAG configurations. This
feature enables per-multiplane group load balancing by extending the
software system image GUID with a balance ID component.
Key implementations:
- Enable lag_per_mp_group capability when supported by hardware.
- Append load_balance_id to software system image GUID when conditions
are met.
- Increase MLX5_SW_IMAGE_GUID_MAX_BYTES from 8 to 9 to accommodate the
extra byte.
The balance ID is appended to the system image GUID only when both
load_balance_id and lag_per_mp_group capabilities are available, ensuring
backward compatibility while enabling enhanced LAG functionality.
This enhancement allows for more granular load balancing control in complex
multi-plane LAG deployments, improving network performance and flexibility.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace direct hardware system image GUID usage with a new software
system image GUID function that supports variable-length identifiers.
Key changes:
- Add mlx5_query_nic_sw_system_image_guid() function with length parameter.
- Update all callsites to use the new function and buffer/length approach.
- Modify mapping contexts to use byte arrays instead of u64 keys.
- Update devcom matching to support variable-length keys.
- Change mlx5_same_hw_devs() to use buffer comparison instead of u64.
This refactoring prepares the infrastructure for balance ID support,
which requires extending the system image GUID with additional data.
The change maintains backward compatibility while enabling future
enhancements.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to the generic parameters used for parsing DT files. This allows to
specify the independent skew delay value for the two directions.
This enables drivers that use the generic pin configuration to get
the value passed through these new properties.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow a generic pinconf property to specify its argument as one of
the strings in a match list.
Convert the matching string to an integer value using the index in
the list, then keep using this value in the generic pinconf code.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some KASAN builds are failing to properly optimize this code --
luckily we don't care about core quality for KASAN builds, so just
exclude it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202510251641.idrNXhv5-lkp@intel.com/
|
|
When the BPF ring buffer is full, a new event cannot be recorded until one
or more old events are consumed to make enough space for it. In cases such
as fault diagnostics, where recent events are more useful than older ones,
this mechanism may lead to critical events being lost.
So add overwrite mode for BPF ring buffer to address it. In this mode, the
new event overwrites the oldest event when the buffer is full.
The basic idea is as follows:
1. producer_pos tracks the next position to record new event. When there
is enough free space, producer_pos is simply advanced by producer to
make space for the new event.
2. To avoid waiting for consumer when the buffer is full, a new variable,
overwrite_pos, is introduced for producer. It points to the oldest event
committed in the buffer. It is advanced by producer to discard one or more
oldest events to make space for the new event when the buffer is full.
3. pending_pos tracks the oldest event to be committed. pending_pos is never
passed by producer_pos, so multiple producers never write to the same
position at the same time.
The following example diagrams show how it works in a 4096-byte ring buffer.
1. At first, {producer,overwrite,pending,consumer}_pos are all set to 0.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| |
| |
| |
+-----------------------------------------------------------------------+
^
|
|
producer_pos = 0
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
2. Now reserve a 512-byte event A.
There is enough free space, so A is allocated at offset 0. And producer_pos
is advanced to 512, the end of A. Since A is not submitted, the BUSY bit is
set.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | |
| A | |
| [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 512
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
3. Reserve event B, size 1024.
B is allocated at offset 512 with BUSY bit set, and producer_pos is advanced
to the end of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | |
| A | B | |
| [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 1536
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
4. Reserve event C, size 2048.
C is allocated at offset 1536, and producer_pos is advanced to 3584.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| [BUSY] | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^
| |
| |
| producer_pos = 3584
|
overwrite_pos = 0
pending_pos = 0
consumer_pos = 0
5. Submit event A.
The BUSY bit of A is cleared. B becomes the oldest event to be committed, so
pending_pos is advanced to 512, the start of B.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | [BUSY] | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 512 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
6. Submit event B.
The BUSY bit of B is cleared, and pending_pos is advanced to the start of C,
which is now the oldest event to be committed.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| A | B | C | |
| | | [BUSY] | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | |
| pending_pos = 1536 producer_pos = 3584
|
overwrite_pos = 0
consumer_pos = 0
7. Reserve event D, size 1536 (3 * 512).
There are 2048 bytes not being written between producer_pos (currently 3584)
and pending_pos, so D is allocated at offset 3584, and producer_pos is advanced
by 1536 (from 3584 to 5120).
Since event D will overwrite all bytes of event A and the first 512 bytes of
event B, overwrite_pos is advanced to the start of event C, the oldest event
that is not overwritten.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| [BUSY] | | [BUSY] | [BUSY] |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | pending_pos = 1536
| | overwrite_pos = 1536
| |
| producer_pos=5120
|
consumer_pos = 0
8. Reserve event E, size 1024.
Although there are 512 bytes not being written between producer_pos and
pending_pos, E cannot be reserved, as it would overwrite the first 512
bytes of event C, which is still being written.
9. Submit event C and D.
pending_pos is advanced to the end of D.
0 512 1024 1536 2048 2560 3072 3584 4096
+-----------------------------------------------------------------------+
| | | | |
| D End | | C | D Begin|
| | | | |
+-----------------------------------------------------------------------+
^ ^ ^
| | |
| | overwrite_pos = 1536
| |
| producer_pos=5120
| pending_pos=5120
|
consumer_pos = 0
The performance data for overwrite mode will be provided in a follow-up
patch that adds overwrite-mode benchmarks.
A sample of performance data for non-overwrite mode, collected on an x86_64
CPU and an arm64 CPU, before and after this patch, is shown below. As we can
see, no obvious performance regression occurs.
- x86_64 (AMD EPYC 9654)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.623 ± 0.027M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.812 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 7.871 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.703 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.896 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.054 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.864 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.580 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.484 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.369 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.316 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.272 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.239 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.226 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.213 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.193 ± 0.001M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.845 ± 0.036M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 15.889 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 8.155 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 6.708 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 2.918 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 2.065 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 1.870 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 1.582 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 1.482 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 1.372 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 1.323 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 1.264 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 1.236 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 1.209 ± 0.002M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 1.189 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 1.165 ± 0.002M/s (drops 0.000 ± 0.000M/s)
- arm64 (HiSilicon Kunpeng 920)
Before:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.310 ± 0.623M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.947 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.634 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 4.502 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.888 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.372 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.189 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.998 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 3.086 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.845 ± 0.004M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.815 ± 0.008M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.771 ± 0.009M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.814 ± 0.011M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.752 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.695 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.710 ± 0.006M/s (drops 0.000 ± 0.000M/s)
After:
Ringbuf, multi-producer contention
==================================
rb-libbpf nr_prod 1 11.283 ± 0.550M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 2 9.993 ± 0.003M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 3 6.898 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 4 5.257 ± 0.001M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 8 3.830 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 12 3.528 ± 0.013M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 16 3.265 ± 0.018M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 20 2.990 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 24 2.929 ± 0.014M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 28 2.898 ± 0.010M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 32 2.818 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 36 2.789 ± 0.012M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 40 2.770 ± 0.006M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 44 2.651 ± 0.007M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 48 2.669 ± 0.005M/s (drops 0.000 ± 0.000M/s)
rb-libbpf nr_prod 52 2.695 ± 0.009M/s (drops 0.000 ± 0.000M/s)
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251018035738.4039621-2-xukuohai@huaweicloud.com
|
|
Since commit 051d44209842 ("net/sched: Retire CBQ qdisc")
this is not used anymore.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20251024025145.4069583-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now, sctp_accept() and sctp_do_peeloff() use sk_clone(), and
we no longer need sctp_copy_sock() and sctp_copy_descendant().
Let's remove them.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251023231751.4168390-9-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_v[46]_create_accept_sk() are no longer used.
Let's remove sctp_pf.create_accept_sk().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251023231751.4168390-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sctp_accept() will use sk_clone_lock(), but it will be called
with the parent socket locked, and sctp_migrate() acquires the
child lock later.
Let's add no lock version of sk_clone_lock().
Note that lockdep complains if we simply use bh_lock_sock_nested().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251023231751.4168390-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously linker scripts would always generate vmlinuz that has sections
aligned. And thus padded (correct Authenticode calculation) and unpadded
calculation would be same. As in https://github.com/rhboot/pesign userspace
tool would produce the same authenticode digest for both of the following
commands:
pesign --padding --hash --in ./arch/x86_64/boot/bzImage
pesign --nopadding --hash --in ./arch/x86_64/boot/bzImage
The commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo section of variable length. Depending
on kernel configuration it may or may not be aligned.
All userspace signing tooling correctly pads such section to calculation
spec compliant authenticode digest.
However, if bzImage is not further processed and is attempted to be loaded
directly by EDK2 firmware, it calculates unpadded Authenticode digest and
fails to correct accept/reject such kernel builds even when propoer
Authenticode values are enrolled in db/dbx. One can say EDK2 requires
aligned/padded kernels in Secureboot.
Thus add ALIGN(8) to the .modinfo section, to esure kernels irrespective of
modinfo contents can be loaded by all existing EDK2 firmware builds.
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Cc: stable@vger.kernel.org
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@surgut.co.uk>
Link: https://patch.msgid.link/20251026202100.679989-1-dimitri.ledkov@surgut.co.uk
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
During a handshake, an endpoint may specify a maximum record size limit.
Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the
maximum record size. Meaning that, the outgoing records from the kernel
can exceed a lower size negotiated during the handshake. In such a case,
the TLS endpoint must send a fatal "record_overflow" alert [1], and
thus the record is discarded.
Upcoming Western Digital NVMe-TCP hardware controllers implement TLS
support. For these devices, supporting TLS record size negotiation is
necessary because the maximum TLS record size supported by the controller
is less than the default 16KB currently used by the kernel.
Currently, there is no way to inform the kernel of such a limit. This patch
adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that
allows for setting the maximum plaintext fragment size. Once set, outgoing
records are no larger than the size specified. This option can be used to
specify the record size limit.
[1] https://www.rfc-editor.org/rfc/rfc8449
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20251022001937.20155-1-wilfred.opensource@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ID for the Qualcomm SM8850 SoC which represents the Kaanapali
platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251022-knp-socid-v2-1-d147eadd09ee@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.
This change:
* Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
* Override non-sleepable constructor with sleepable if it's always
called in sleepable context
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the necessary verifier plumbing for the new file-backed dynptr type.
Introduce two kfuncs for its lifecycle management:
* bpf_dynptr_from_file() for initialization
* bpf_dynptr_file_discard() for destruction
Currently there is no mechanism for kfunc to release dynptr, this patch
add one:
* Dynptr release function sets meta->release_regno
* Call unmark_stack_slots_dynptr() if meta->release_regno is set and
dynptr ref_obj_id is set as well.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-7-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move struct freader and prototypes of the functions operating on it into
the buildid.h.
This allows reusing freader outside buildid, e.g. for file dynptr
support added later.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251026203853.135105-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Having removed the use of the cpu_armpmu per-CPU variable from the
interrupt handling, the only user left is the BRBE scheduler hook.
It is easy to drop the use of this variable by following the pointer to the
generic PMU structure, and get the arm_pmu structure from there.
Perform the conversion and kill cpu_armpmu altogether.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-27-maz@kernel.org
|
|
There is no in-tree users of this helper since b13b41cc3dc18 ("misc:
ti_fpc202: Switch to of_fwnode_handle()"), and is replaced with
of_fwnode_handle().
Get rid of it.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-26-maz@kernel.org
|
|
These two helpers do not have any user anymore, and can be removed,
together with the affinity field kept in the irqdesc structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-25-maz@kernel.org
|
|
This code is now completely unused, and nobody will ever miss it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org
|
|
Let the PMU driver request both NMIs and normal interrupts with an affinity mask
matching the PMU affinity.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-19-maz@kernel.org
|
|
While it would be nice to simply make request_percpu_irq() take an affinity
mask, the churn is likely to be on the irritating side given that most
drivers do not give a damn about affinities.
So take the more innocuous path to provide a helper that parallels
request_percpu_irq(), with an affinity as a bonus argument.
Yes, request_percpu_irq_affinity() is a bit of a mouthful.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-18-maz@kernel.org
|
|
Continue spreading the notion of affinity to the per CPU interrupt request
code by updating the call sites that use request_percpu_nmi() (all two of
them) to take an affinity pointer. This pointer is firmly NULL for now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-16-maz@kernel.org
|
|
Add an affinity field to both the irqaction structure and the interrupt
request primitives. Nothing is making use of it yet, and the only value
used it NULL, which is used as a shorthand for cpu_possible_mask.
This will shortly get used with actual affinities.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-15-maz@kernel.org
|
|
When irqaction::percpu_dev_id was introduced, it was hoped that it could be
part of an anonymous union with dev_id, as the two fields are mutually
exclusive.
However, toolchains used at the time were often showing terrible support
for anonymous unions, breaking the build on a number of architectures. It
was therefore decided to keep the two fields separate and address this down
the line.
14 years later, the compiler dark age is over, and there is universal
support for anonymous unions. Get a whole pointer back that can immediately
be spent on something else.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-13-maz@kernel.org
|
|
There is no in-tree user of this flow handler anymore, so simply remove it.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-12-maz@kernel.org
|
|
Expand platform_get_irq_optional() to also return an affinity if available,
renaming it to platform_get_irq_affinity() in the process.
platform_get_irq_optional() is preserved with its current semantics by
calling into the new helper with a NULL affinity pointer.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-5-maz@kernel.org
|
|
Plug the irq_populate_fwspec_info() helper into the OF layer to offer an
interrupt affinity reporting function.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-4-maz@kernel.org
|
|
Plug the irq_populate_fwspec_info() helper into the ACPI layer to offer an
interrupt affinity reporting function. This is currently only supported for
the CONFIG_ACPI_GENERIC_GSI configurations, but could later be extended to
legacy architectures if necessary.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-3-maz@kernel.org
|
|
Add an irqdomain callback to report firmware-provided information that is
otherwise not available in a generic way. This is reported using a new data
structure (struct irq_fwspec_info).
This callback is optional and the only information that can be reported
currently is the affinity of an interrupt. However, the containing
structure is designed to be extensible, allowing other potentially relevant
information to be reported in the future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251020122944.3074811-2-maz@kernel.org
|
|
Currently, asm/percpu.h is directly or indirectly included by
some assembly files on x86. Some of them (e.g., checksum_32.S)
are also used on um. But x86 and um provide different versions
of asm/percpu.h -- um uses asm-generic/percpu.h directly.
When SMP is enabled, asm-generic/percpu.h will introduce C code
that cannot be assembled. Since asm-generic/percpu.h currently
is not designed for use in assembly, and these assembly files
do not actually need asm/percpu.h on um, let's add the assembly
guard in asm-generic/percpu.h to fix this issue.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251027001815.1666872-8-tiwei.bie@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Now full support for the UMP buffers is available, it is possible to
read the SDCA HID descriptors from the device and pass them to
user-space. Add a helper function to process HID events from an SDCA
device.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-20-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some IRQs (FDL) require processing before the primary soundcard is
brought up, as the downloaded files could be firmware required for
operation of the audio functions of the device. Add a new helper
function which registers the required IRQs.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-19-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Several of the UMP transactions in the FDL process should timeout if the
device does not respond within a certain time, add handling into the UMP
helpers and the FDL code to handle this.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-18-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add some completions and a helper function to allow other parts of the
system to wait for FDL to complete. The sdca_fdl_sync() function will
wait until it completes a full time out without a new FDL request
happening, this ensures that even parts requiring multiple rounds of FDL
should be fully downloaded before the driver boot continues.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-17-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some instances of the XU Entity have a need for Files to be downloaded
from the Host. In these XUs, there is one instance of a Host to Device
(Consumer) UMP, identified by the FDL_CurrentOwner Control. FDL Library
introduced here implements the FDL flow triggered by FDL_CurrentOwner
irq, which sends a file from SoundWire File Table (SWFT) or from the
firmware directory in specific cases, to the Device FDL UMP.
Currently only Direct method of FDL is implemented.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-15-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add parsing of ACPI DisCo information specific to FDL (File DownLoad).
DisCo contains a list of File Sets which can be requested by the device
and within each of those a list of individual files to be downloaded to
the device. Optionally the contents of the files may also be present in
a special ACPI table, called SWFT (SoundWire File Table).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-14-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add helper functions for handling Universal Message Passing (UMP)
buffers on SDCA devices. These are generic mechanisms to pass blocks of
binary data between the host and the device, in both directions. They
are used for things like passing HID descriptors and the File Download
process.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-13-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
