| Age | Commit message (Collapse) | Author |
|---|
|
might_alloc() catches invalid blocking allocations in contexts where
sleeping is not allowed.
However when PF_MEMALLOC is set, the page allocator already skips reclaim
and other blocking paths. In such cases, a blocking gfp_mask does not
actually lead to blocking, so triggering might_alloc() splats is
misleading.
Adjust might_alloc() to skip warnings when the current task has
PF_MEMALLOC set, matching the allocator's actual blocking behaviour.
Link: https://lkml.kernel.org/r/20251007122035.56347-9-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
kmsan_vmap_pages_range_noflush() allocates its temp s_pages/o_pages arrays
with GFP_KERNEL, which may sleep. This is inconsistent with vmalloc() as
it will support non-blocking requests later.
Plumb gfp_mask through the kmsan_vmap_pages_range_noflush(), so it can use
it internally for its demand.
Please note, the subsequent __vmap_pages_range_noflush() still uses
GFP_KERNEL and can sleep. If a caller runs under reclaim constraints,
sleeping is forbidden, it must establish the appropriate memalloc scope
API.
Link: https://lkml.kernel.org/r/20251007122035.56347-8-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make __vmalloc_area_node() respect non-blocking GFP masks such as
GFP_ATOMIC and GFP_NOWAIT.
- Add memalloc_apply_gfp_scope()/memalloc_restore_scope()
helpers to apply a proper scope.
- Apply memalloc_apply_gfp_scope()/memalloc_restore_scope()
around vmap_pages_range() for page table setup.
- Set "nofail" to false if a non-blocking mask is used, as
they are mutually exclusive.
This is particularly important for page table allocations that internally
use GFP_PGTABLE_KERNEL, which may sleep unless such scope restrictions are
applied. For example:
<snip>
__pte_alloc_kernel()
pte_alloc_one_kernel(&init_mm);
pagetable_alloc_noprof(GFP_PGTABLE_KERNEL & ~__GFP_HIGHMEM, 0);
<snip>
Note: in most cases, PTE entries are established only up to the level
required by current vmap space usage, meaning the page tables are
typically fully populated during the mapping process.
Link: https://lkml.kernel.org/r/20251007122035.56347-6-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__vmalloc_area_node() may call free_vmap_area() or vfree() on error paths,
both of which can sleep. This becomes problematic if the function is
invoked from an atomic context, such as when GFP_ATOMIC or GFP_NOWAIT is
passed via gfp_mask.
To fix this, unify error paths and defer the cleanup of partly initialized
vm_struct objects to a workqueue. This ensures that freeing happens in a
process context and avoids invalid sleeps in atomic regions.
Link: https://lkml.kernel.org/r/20251007122035.56347-5-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
follow_devmap_pmd() has already been dropped by the commit fd2825b0760a
("mm/gup: remove pXX_devmap usage from get_user_pages()"). The fallback
stub in the header which is now redundant, can be dropped off as well.
Link: https://lkml.kernel.org/r/20250929104643.1100421-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch converts below functions.
dapm->dev -> snd_soc_dapm_to_dev()
dapm->card -> snd_soc_dapm_to_card()
dapm->component -> snd_soc_dapm_to_component()
dapm_kcontrol_get_value() -> snd_soc_dapm_kcontrol_get_value()
snd_soc_component_enable_pin() -> snd_soc_dapm_enable_pin()
snd_soc_component_enable_pin_unlocked() -> snd_soc_dapm_enable_pin_unlocked()
snd_soc_component_disable_pin() -> snd_soc_dapm_disable_pin()
snd_soc_component_disable_pin_unlocked() -> snd_soc_dapm_disable_pin_unlocked()
snd_soc_component_nc_pin() -> snd_soc_dapm_nc_pin()
snd_soc_component_nc_pin_unlocked() -> snd_soc_dapm_nc_pin_unlocked()
snd_soc_component_get_pin_status() -> snd_soc_dapm_get_pin_status()
snd_soc_component_force_enable_pin() -> snd_soc_dapm_force_enable_pin()
snd_soc_component_force_enable_pin_unlocked() -> snd_soc_dapm_force_enable_pin_unlocked()
snd_soc_component_force_bias_level() -> snd_soc_dapm_force_bias_level()
snd_soc_component_get_bias_level() -> snd_soc_dapm_get_bias_level()
snd_soc_component_init_bias_level() -> snd_soc_dapm_init_bias_level()
snd_soc_component_get_dapm() -> snd_soc_component_to_dapm()
snd_soc_dapm_kcontrol_component() -> snd_soc_dapm_kcontrol_to_component()
snd_soc_dapm_kcontrol_widget() -> snd_soc_dapm_kcontrol_to_widget()
snd_soc_dapm_kcontrol_dapm() -> snd_soc_dapm_kcontrol_to_dapm()
snd_soc_dapm_np_pin() -> snd_soc_dapm_disable_pin()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/87346la0cv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch converts below functions.
dapm->dev -> snd_soc_dapm_to_dev()
dapm->card -> snd_soc_dapm_to_card()
dapm->component -> snd_soc_dapm_to_component()
dapm_kcontrol_get_value() -> snd_soc_dapm_kcontrol_get_value()
snd_soc_component_enable_pin() -> snd_soc_dapm_enable_pin()
snd_soc_component_enable_pin_unlocked() -> snd_soc_dapm_enable_pin_unlocked()
snd_soc_component_disable_pin() -> snd_soc_dapm_disable_pin()
snd_soc_component_disable_pin_unlocked() -> snd_soc_dapm_disable_pin_unlocked()
snd_soc_component_nc_pin() -> snd_soc_dapm_nc_pin()
snd_soc_component_nc_pin_unlocked() -> snd_soc_dapm_nc_pin_unlocked()
snd_soc_component_get_pin_status() -> snd_soc_dapm_get_pin_status()
snd_soc_component_force_enable_pin() -> snd_soc_dapm_force_enable_pin()
snd_soc_component_force_enable_pin_unlocked() -> snd_soc_dapm_force_enable_pin_unlocked()
snd_soc_component_force_bias_level() -> snd_soc_dapm_force_bias_level()
snd_soc_component_get_bias_level() -> snd_soc_dapm_get_bias_level()
snd_soc_component_init_bias_level() -> snd_soc_dapm_init_bias_level()
snd_soc_component_get_dapm() -> snd_soc_component_to_dapm()
snd_soc_dapm_kcontrol_component() -> snd_soc_dapm_kcontrol_to_component()
snd_soc_dapm_kcontrol_widget() -> snd_soc_dapm_kcontrol_to_widget()
snd_soc_dapm_kcontrol_dapm() -> snd_soc_dapm_kcontrol_to_dapm()
snd_soc_dapm_np_pin() -> snd_soc_dapm_disable_pin()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/874ir1a0cz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case topology provides NHLT configuration, use it instead of relying
on the table in ACPI tree. Only gateway-related modules e.g.: Copier
care about the process. For those the order of fetching for hardware
configuration becomes:
1) check if NHLT override is set,
2) check if NHLT descriptor override is set,
3) use NHLT from ACPI directly
Such approach ensures no conflicts exist between 1) and 2) and that 1)
always takes precedence.
Co-developed-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251115180627.3589520-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Typically the hardware configuration for I2S and DMIC devices resides
in the Non-HDAudio Link Table (NHLT) that is part of the ACPI tree. As
the NHLTs existing in the field are not always perfect, workaround
mechanisms are provided to patch them.
Currently the avs-driver is utilizing the ->blob_fmt override (see
topology.h and struct avs_tplg_modcfg_ext) when there is a valid entry
within a NHLT to configure the hardware for specific format but its
descriptor (header) is invalid.
A separate case is when there is no correct hardware configuration at
all within the NHLT available in the system. Patching the header won't
help and forcing ad-hoc BIOS updates for dated system is not feasible.
Allowing the topology to carry the data is the solution of choice as
replacing a userspace file that is part of /lib/firmware/intel/ is less
invasive than BIOS update and solves the problem.
Co-developed-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Amadeusz Sławiński <amade@asmblr.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20251115180627.3589520-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
svc_tcp_sendmsg() calls xdr_buf_to_bvec() with the second slot of
rq_bvec as the start, but doesn't reduce the array length by one, which
could lead to an array overrun. Also, rq_bvec is always rq_maxpages in
length, which can be too short in some cases, since the TCP record
marker consumes a slot.
Fix both problems by adding a separate bvec array to the svc_sock that
is specifically for sending. For TCP, make this array one slot longer
than rq_maxpages, to account for the record marker. For UDP, only
allocate as large an array as we need since it's limited to 64k of
payload.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The range of commits from commit e3274026e2ec ("SUNRPC: move all of
xprt handling into svc_xprt_handle()") to commit 15d39883ee7d
("SUNRPC: change the back-channel queue to lwq") enabled NFSD
performance to scale better as the number of nfsd threads is
increased. These commits were merged in v6.7.
Now that the nfsd thread count can scale to more threads, permit
individual clients to make more use of those threads. Increase the
RPC/RDMA per-connection credit grant from 64 to 128 -- same as the
Linux NFS client.
Simple single client fio-based benchmarking so far shows only
improvement, no regression.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
|
|
... and there's no need to remember those pointers anywhere - ->kill_sb()
no longer needs to bother since kill_anon_super() will take care of
them anyway and proc_pid_readdir() only wants the inumbers, which
we had in a couple of static variables all along.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
* d_make_persistent(dentry, inode) - bump refcount, mark persistent and
make hashed positive. Return value is a borrowed reference to dentry;
it can be used until something removes persistency (at the very least,
until the parent gets unlocked, but some filesystems may have stronger
exclusion).
* d_make_discardable() - remove persistency mark and drop reference.
d_make_persistent() is similar to combination of d_instantiate(), dget()
and setting flag. The only difference is that unlike d_instantiate()
it accepts hashed and unhashed negatives alike. It is always called in
strong locking environment (parent held exclusive, or, in some cases,
dentry coming from d_alloc_name()); if we ever start using it with parent
held only shared and dentry coming from d_alloc_parallel(), we'll need
to copy the in-lookup logics from __d_add().
d_make_discardable() is eqiuvalent to combination of removing flag and
dput(); since flag removal requires ->d_lock, there's no point trying
to avoid taking that for refcount decrement as fast_dput() does.
The slow path of dput() has been taken into a helper and reused in
d_make_discardable() instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some filesystems use a kinda-sorta controlled dentry refcount leak to pin
dentries of created objects in dcache (and undo it when removing those).
Reference is grabbed and not released, but it's not actually _stored_
anywhere. That works, but it's hard to follow and verify; among other
things, we have no way to tell _which_ of the increments is intended
to be an unpaired one. Worse, on removal we need to decide whether
the reference had already been dropped, which can be non-trivial if
that removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag (DCACHE_PERSISTENT)
marking those "leaked" dentries. Having it set claims responsibility
for +1 in refcount.
The end result this series is aiming for:
* get these unbalanced dget() and dput() replaced with new primitives that
would, in addition to adjusting refcount, set and clear persistency flag.
* instead of having kill_litter_super() mess with removing the remaining
"leaked" references (e.g. for all tmpfs files that hadn't been removed
prior to umount), have the regular shrink_dcache_for_umount() strip
DCACHE_PERSISTENT of all dentries, dropping the corresponding
reference if it had been set. After that kill_litter_super() becomes
an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many places
in too many filesystems. It has to be split into a series.
Here we
* introduce the new flag
* teach shrink_dcache_for_umount() to handle it (i.e. remove
and drop refcount on anything that survives to umount with that flag
still set)
* teach kill_litter_super() that anything with that flag does
*not* need to be unpinned.
Next commits will add primitives for maintaing that flag and convert the
common helpers to those. After that - a long series of per-filesystem
patches converting to those primitives.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
should be paired with simple_start_creating() - unlocks parent and
drops dentry reference.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simple_recursive_removal(), but instead of victim dentry it takes
parent + name.
Used to be open-coded in fs/fuse/control.c, but there's no need to expose
the guts of that thing there and there are other potential users, so
let's lift it into libfs...
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
In the past, CONFIG_ARCH_HAS_GIGANTIC_PAGE indicated that we support
runtime allocation of gigantic hugetlb folios. In the meantime it evolved
into a generic way for the architecture to state that it supports gigantic
hugetlb folios.
In commit fae7d834c43c ("mm: add __dump_folio()") we started using
CONFIG_ARCH_HAS_GIGANTIC_PAGE to decide MAX_FOLIO_ORDER: whether we could
have folios larger than what the buddy can handle. In the context of that
commit, we started using MAX_FOLIO_ORDER to detect page corruptions when
dumping tail pages of folios. Before that commit, we assumed that we
cannot have folios larger than the highest buddy order, which was
obviously wrong.
In commit 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes
when registering hstate"), we used MAX_FOLIO_ORDER to detect
inconsistencies, and in fact, we found some now.
Powerpc allows for configs that can allocate gigantic folio during boot
(not at runtime), that do not set CONFIG_ARCH_HAS_GIGANTIC_PAGE and can
exceed PUD_ORDER.
To fix it, let's make powerpc select CONFIG_ARCH_HAS_GIGANTIC_PAGE with
hugetlb on powerpc, and increase the maximum folio size with hugetlb to 16
GiB on 64bit (possible on arm64 and powerpc) and 1 GiB on 32 bit
(powerpc). Note that on some powerpc configurations, whether we actually
have gigantic pages depends on the setting of CONFIG_ARCH_FORCE_MAX_ORDER,
but there is nothing really problematic about setting it unconditionally:
we just try to keep the value small so we can better detect problems in
__dump_folio() and inconsistencies around the expected largest folio in
the system.
Ideally, we'd have a better way to obtain the maximum hugetlb folio size
and detect ourselves whether we really end up with gigantic folios. Let's
defer bigger changes and fix the warnings first.
While at it, handle gigantic DAX folios more clearly: DAX can only end up
creating gigantic folios with HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
Add a new Kconfig option HAVE_GIGANTIC_FOLIOS to make both cases clearer.
In particular, worry about ARCH_HAS_GIGANTIC_PAGE only with HUGETLB_PAGE.
Note: with enabling CONFIG_ARCH_HAS_GIGANTIC_PAGE on powerpc, we will now
also allow for runtime allocations of folios in some more powerpc configs.
I don't think this is a problem, but if it is we could handle it through
__HAVE_ARCH_GIGANTIC_PAGE_RUNTIME_SUPPORTED.
While __dump_page()/__dump_folio was also problematic (not handling
dumping of tail pages of such gigantic folios correctly), it doesn't seem
critical enough to mark it as a fix.
Link: https://lkml.kernel.org/r/20251114214920.2550676-1-david@kernel.org
Fixes: 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes when registering hstate")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Closes: https://lore.kernel.org/r/3e043453-3f27-48ad-b987-cc39f523060a@csgroup.eu/
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/r/94377f5c-d4f0-4c0f-b0f6-5bf1cd7305b1@linux.ibm.com/
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a broken #ifndef in the <linux/entry-virt.h> header.
It hasn't caused problems upstream yet because no arch overrides
arch_xfer_to_guest_mode_handle_work() at this moment"
* tag 'core-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix ifndef around arch_xfer_to_guest_mode_handle_work() stub
|
|
Add support for the AST2700 SoC in the ASPEED watchdog device tree
bindings. This includes:
- Adding "aspeed,ast2700-wdt" to the compatible string list.
- Extending the "aspeed,reset-mask" property description for AST2700.
- Defining AST2700-specific reset mask bits in aspeed-wdt.h,
covering RESET1 to RESET5.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add defines for the pixel clock sampling modes (rising edge, falling edge,
dual edge) for parallel video interfaces.
This avoids hardcoded constants in device tree sources.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
STATIC_CALL_TRAMP_STR() could not be used from .S files because
static_call_types.h was not safe to include in assembly as it pulled in C
types/constructs that are unavailable under __ASSEMBLY__.
Make the header assembly-friendly by adding __ASSEMBLY__ checks and
providing only the minimal definitions needed for assembly, so that it
can be safely included by .S code. This enables emitting the static call
trampoline symbol name via STATIC_CALL_TRAMP_STR() directly in assembly
sources, to be used with 'call' instruction. Also, move a certain
definitions out of __ASSEMBLY__ checks in compiler_types.h to meet
the dependencies.
No functional change for C compilation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The existing mshv create partition ioctl does not provide a way to
specify which cpu features are enabled in the guest. Instead, it
attempts to enable all features and those that are not supported are
silently disabled by the hypervisor.
This was done to reduce unnecessary complexity and is sufficient for
many cases. However, new scenarios require fine-grained control over
these features.
Define a new mshv_create_partition_v2 structure which supports
passing the disabled processor and xsave feature bits through to the
create partition hypercall directly.
Introduce a new flag MSHV_PT_BIT_CPU_AND_XSAVE_FEATURES which enables
the new structure. If unset, the original mshv_create_partition struct
is used, with the old behavior of enabling all features.
Co-developed-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Currently the MSHV driver rejects mappings that would overlap in
userspace.
Some VMMs require the same memory to be mapped to different parts of
the guest's address space, and so working around this restriction is
difficult.
The hypervisor itself doesn't prohibit mappings that overlap in uaddr,
(really in SPA; system physical addresses), so supporting this in the
driver doesn't require any extra work: only the checks need to be
removed.
Since no userspace code until now has been able to overlap regions in
userspace, relaxing this constraint can't break any existing code.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add data structures for hypervisor crash dump support to the hypervisor
host ABI header file. Details of their usages are in subsequent commits.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
In preparation for the subsequent crashdump patches, copy two hypercall
numbers to the guest ABI header published by Hyper-V. One to notify
hypervisor of an event that occurs in the root partition, other to ask
hypervisor to disable the hypervisor.
Signed-off-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduce HVCALL_MAP_STATS_PAGE2 which provides a map location (GPFN)
to map the stats to. This hypercall is required for L1VH partitions,
depending on the hypervisor version. This uses the same check as the
state page map location; mshv_use_overlay_gpfn().
Add mshv_map_vp_state_page() helpers to use this new hypercall or the
old one depending on availability.
For unmapping, the original HVCALL_UNMAP_STATS_PAGE works for both
cases.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This hypercall can be used to fetch extended properties of a
partition. Extended properties are properties with values larger than
a u64. Some of these also need additional input arguments.
Add helper function for using the hypercall in the mshv_root driver.
Signed-off-by: Purna Pavan Chandra Aekkaladevi <paekkaladevi@linux.microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam <anirudh@anirudhrb.com>
Reviewed-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
hv_set_non_nested_msr() has special handling for SINT MSRs
when a paravisor is present. In addition to updating the MSR on the
host, the mirror MSR in the paravisor is updated, including with the
proxy bit. But with Confidential VMBus, the proxy bit must not be
used, so add a special case to skip it.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Tianyu Lan <tiala@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The existing Hyper-V wrappers for getting and setting MSRs are
hv_get/set_msr(). Via hv_get/set_non_nested_msr(), they detect
when running in a CoCo VM with a paravisor, and use the TDX or
SNP guest-host communication protocol to bypass the paravisor
and go directly to the host hypervisor for SynIC MSRs. The "set"
function also implements the required special handling for the
SINT MSRs.
Provide functions that allow manipulating the SynIC registers
through the paravisor. Move vmbus_signal_eom() to a more
appropriate location (which also avoids breaking KVM).
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Confidential VMBus requires enabling paravisor SynIC, and
the x86_64 guest has to inspect the Virtualization Stack (VS)
CPUID leaf to see if Confidential VMBus is available. If it is,
the guest shall enable the paravisor SynIC.
Read the relevant data from the VS CPUID leaf. Refactor the
code to avoid repeating CPUID and add flags to the struct
ms_hyperv_info. For ARM64, the flag for Confidential VMBus
is not set which provides the desired behaviour for now as
it is not available on ARM64 just yet. Once ARM64 CCA guests
are supported, this flag will be set unconditionally when
running such a guest.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The confidential VMBus is supported starting from the protocol
version 6.0 onwards.
Provide the required definitions. No functional changes.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When Secure AVIC is enabled, VMBus driver should
call x2apic Secure AVIC interface to allow Hyper-V
to inject VMBus message interrupt.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Tianyu Lan <tiala@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
When the MSHV_ROOT_HVCALL ioctl is executing a hypercall, and gets
HV_STATUS_INSUFFICIENT_MEMORY, it deposits memory and then returns
-EAGAIN to userspace. The expectation is that the VMM will retry.
However, some VMM code in the wild doesn't do this and simply fails.
Rather than force the VMM to retry, change the ioctl to deposit
memory on demand and immediately retry the hypercall as is done with
all the other hypercall helper functions.
In addition to making the ioctl easier to use, removing the need for
multiple syscalls improves performance.
There is a complication: unlike the other hypercall helper functions,
in MSHV_ROOT_HVCALL the input is opaque to the kernel. This is
problematic for rep hypercalls, because the next part of the input
list can't be copied on each loop after depositing pages (this was
the original reason for returning -EAGAIN in this case).
Introduce hv_do_rep_hypercall_ex(), which adds a 'rep_start'
parameter. This solves the issue, allowing the deposit loop in
MSHV_ROOT_HVCALL to restart a rep hypercall after depositing pages
partway through.
Fixes: 621191d709b1 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2025-11-13
The following pull-request contains common mlx5 updates
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Expose definition for 1600Gbps link mode
net/mlx5: fs, set non default device per namespace
net/mlx5: fs, Add other_eswitch support for steering tables
net/mlx5: Add OTHER_ESWITCH HW capabilities
net/mlx5: Add direct ST mode support for RDMA
PCI/TPH: Expose pcie_tph_get_st_table_loc()
{rdma,net}/mlx5: Query vports mac address from device
====================
Link: https://patch.msgid.link/1763027252-1168760-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit bf40785fa437 ("sctp: Use HMAC-SHA1 and HMAC-SHA256 library for chunk
authentication") removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251113114501.32905-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_gro_pull_header() is used in GRO fast path, inline it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251113140358.58242-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Minor conflict in kernel/bpf/helpers.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
|
|
A PCIe device function interface assigned to a TVM is a TEE Device
Interface (TDI). A TDI instantiated by pci_tsm_bind() needs additional
steps taken by the TVM to be accepted into the TVM's Trusted Compute
Boundary (TCB) and transitioned to the RUN state.
pci_tsm_guest_req() is a channel for the guest to request TDISP collateral,
like Device Interface Reports, and effect TDISP state changes, like
LOCKED->RUN transititions. Similar to IDE establishment and pci_tsm_bind(),
these are long running operations involving SPDM message passing via the
DOE mailbox.
The path for a TVM to invoke pci_tsm_guest_req() is:
* TSM triggers exit via guest-to-host-interface ABI (implementation specific)
* VMM invokes handler (KVM handle_exit() -> userspace io)
* handler issues request (userspace io handler -> ioctl() ->
pci_tsm_guest_req())
* handler supplies response
* VMM posts response, notifies/re-enters TVM
This path is purely a transport for messages from TVM to platform TSM. By
design the host kernel does not and must not care about the content of
these messages. I.e. the host kernel is not in the TCB of the TVM.
As this is an opaque passthrough interface, similar to fwctl, the kernel
requires that implementations stay within the bounds defined by 'enum
pci_tsm_req_scope'. Violation of those expectations likely has market and
regulatory consequences. Out of scope requests are blocked by default.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-8-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
After a PCIe device has established a secure link and session between a TEE
Security Manager (TSM) and its local Device Security Manager (DSM), the
device or its subfunctions are candidates to be bound to a private memory
context, a TVM. A PCIe device function interface assigned to a TVM is a TEE
Device Interface (TDI).
The pci_tsm_bind() requests the low-level TSM driver to associate the
device with private MMIO and private IOMMU context resources of a given TVM
represented by a @kvm argument. A device in the bound state corresponds to
the TDISP protocol LOCKED state and awaits validation by the TVM. It is a
'struct pci_tsm_link_ops' operation because, similar to IDE establishment,
it involves host side resource establishment and context setup on behalf of
the guest. It is also expected to be performed lazily to allow for
operation of the device in non-confidential "shared" context for pre-lock
configuration.
Co-developed-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-7-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The PCIe spec defines two types of streams - selective and link. Each
stream has an ID from the same bucket so a stream ID does not tell the
type. The spec defines an "enable" bit for every stream and required
stream IDs to be unique among all enabled stream but there is no such
requirement for disabled streams.
However, when IDE_KM is programming keys, an IDE-capable device needs
to know the type of stream being programmed to write it directly to
the hardware as keys are relatively large, possibly many of them and
devices often struggle with keeping around rather big data not being
used.
Walk through all streams on a device and initialise the IDs to some
unique number, both link and selective.
The weakest part of this proposal is the host bridge ide_stream_ids_ida.
Technically, a Stream ID only needs to be unique within a given partner
pair. However, with "anonymous" / unassigned streams there is no convenient
place to track the available ids. Proceed with an ida in the host bridge
for now, but consider moving this tracking to be an ide_stream_ids_ida per
device.
Co-developed-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251113021446.436830-6-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The address ranges for downstream Address Association Registers need to
cover memory addresses for all functions (PFs/VFs/downstream devices)
managed by a Device Security Manager (DSM). The proposed solution is get
the memory (32-bit only) range and prefetchable-memory (64-bit capable)
range from the immediate ancestor downstream port (either the direct-attach
RP or deepest switch port when switch attached).
Similar to RID association, address associations will be set by default if
hardware sets 'Number of Address Association Register Blocks' in the
'Selective IDE Stream Capability Register' to a non-zero value. TSM drivers
can opt-out of the settings by zero'ing out unwanted / unsupported address
ranges. E.g. TDX Connect only supports prefetachable (64-bit capable)
memory ranges for the Address Association setting.
If the immediate downstream port provides both a memory range and
prefetchable-memory range, but the IDE partner port only provides 1 Address
Association Register block then the TSM driver can pick which range to
associate, or let the PCI core prioritize memory.
Note, the Address Association Register setup for upstream requests is still
uncertain so is not included.
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Co-developed-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Arto Merilainen <amerilainen@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251114010227.567693-1-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Extend struct dw_hdmi_qp_plat_data to include the supported display
output formats and maximum bits per color channel. When provided by the
platform driver, use them to setup the HDMI bridge accordingly.
Additionally, improve debug logging in dw_hdmi_qp_bridge_atomic_enable()
to also show the current HDMI output format and bpc.
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-2-3d3eed00a6db@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
TEE kernel-doc fixes for v6.18
* tag 'tee-fix-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: <uapi/linux/tee.h: fix all kernel-doc issues
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the buddy lockup detector, smp_processor_id() returns the detecting CPU,
not the locked CPU, making scx_hardlockup()'s printouts confusing. Pass the
locked CPU number from watchdog_hardlockup_check() as a parameter instead.
Also add kerneldoc comments to handle_lockup(), scx_hardlockup(), and
scx_rcu_cpu_stall() documenting their return value semantics.
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add wrapper macros for ACQUIRE()/ACQUIRE_ERR() and runtime PM
usage counter guards introduced recently: pm_runtime_active_try,
pm_runtime_active_auto_try, pm_runtime_active_try_enabled, and
pm_runtime_active_auto_try_enabled.
The new macros should be more straightforward to use.
For example, they can be used for rewriting a piece of code like below:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if ((ret = ACQUIRE_ERR(pm_runtime_active_try, &pm)))
return ret;
in the following way:
PM_RUNTIME_ACQUIRE(dev, pm);
if ((ret = PM_RUNTIME_ACQUIRE_ERR(&pm)))
return ret;
If the original code does not care about the specific error code
returned when attepmting to resume the device:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
return -ENXIO;
it may be changed like this:
PM_RUNTIME_ACQUIRE(dev, pm);
if (PM_RUNTIME_ACQUIRE_ERR(&pm))
return -ENXIO;
Link: https://lore.kernel.org/linux-pm/5068916.31r3eYUQgx@rafael.j.wysocki/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3400866.aeNJFYEL58@rafael.j.wysocki
|
|
Signed-off-by: Jianyun Gao <jianyungao89@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250927093411.1509275-1-jianyungao89@gmail.com
|
|
PCIe r7.0, sec 7.8.6, defines resizable BAR sizes beyond the currently
supported maximum of 128TB, which will require more than u32 to store the
entire bitmask.
Convert Resizable BAR related functions to use u64 bitmask for BAR sizes to
make the typing more future-proof.
The support for the larger BAR sizes themselves is not added at this point.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113180053.27944-12-ilpo.jarvinen@linux.intel.com
|
