| Age | Commit message (Collapse) | Author |
|---|
|
Patch series "mm: finish isolate/putback_lru_page()".
Convert to use more folios in migrate_device.c, then we could remove
isolate_lru_page() and putback_lru_page().
This patch (of 6):
Save a few calls to compound_head() and use folio throughout.
Link: https://lkml.kernel.org/r/20240826065814.1336616-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20240826065814.1336616-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add unmap_poisoned_folio() helper which will be reused by
do_migrate_range() from memory hotplug soon.
[akpm@linux-foundation.org: whitespace tweak, per Miaohe Lin]
Link: https://lkml.kernel.org/r/1f80c7e3-c30d-1ac1-6a36-d1a5f5907f7c@huawei.com
Link: https://lkml.kernel.org/r/20240827114728.3212578-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Increase the number of bits available in page_type".
Kent wants more than 16 bits in page_type, so I resurrected this old patch
and expanded it a bit. It's a bit more efficient than our current scheme
(1 4-byte insn vs 3 insns of 13 bytes total) to test a single page type.
This patch (of 4):
An upcoming patch will convert page type from being a bitfield to a
single byte, so we will not be able to use %pG to print the page type
any more. The printing of the symbolic name will be restored in that
patch.
Link: https://lkml.kernel.org/r/20240821173914.2270383-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240821173914.2270383-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With no more users in the tree, we can finally remove can_modify_mm().
Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-6-d8d2e037df30@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace can_modify_mm_madv() with a single vma variant, and associated
checks in madvise.
While we're at it, also invert the order of checks in:
if (unlikely(is_ro_anon(vma) && !can_modify_vma(vma))
Checking if we can modify the vma itself (through vm_flags) is certainly
cheaper than is_ro_anon() due to arch_vma_access_permitted() looking at
e.g pkeys registers (with extra branches) in some architectures.
This patch allows for partial madvise success when finding a sealed VMA,
which historically has been allowed in Linux.
Link: https://lkml.kernel.org/r/20240817-mseal-depessimize-v3-5-d8d2e037df30@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Zhiguo reported that swap release could be a serious bottleneck during
process exits[1]. With mTHP, we have the opportunity to batch free swaps.
Thanks to the work of Chris and Kairui[2], I was able to achieve this
optimization with minimal code changes by building on their efforts.
If swap_count is 1, which is likely true as most anon memory are private,
we can free all contiguous swap slots all together.
Ran the below test program for measuring the bandwidth of munmap
using zRAM and 64KiB mTHP:
#include <sys/mman.h>
#include <sys/time.h>
#include <stdlib.h>
unsigned long long tv_to_ms(struct timeval tv)
{
return tv.tv_sec * 1000 + tv.tv_usec / 1000;
}
main()
{
struct timeval tv_b, tv_e;
int i;
#define SIZE 1024*1024*1024
void *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (!p) {
perror("fail to get memory");
exit(-1);
}
madvise(p, SIZE, MADV_HUGEPAGE);
memset(p, 0x11, SIZE); /* write to get mem */
madvise(p, SIZE, MADV_PAGEOUT);
gettimeofday(&tv_b, NULL);
munmap(p, SIZE);
gettimeofday(&tv_e, NULL);
printf("munmap in bandwidth: %ld bytes/ms\n",
SIZE/(tv_to_ms(tv_e) - tv_to_ms(tv_b)));
}
The result is as below (munmap bandwidth):
mm-unstable mm-unstable-with-patch
round1 21053761 63161283
round2 21053761 63161283
round3 21053761 63161283
round4 20648881 67108864
round5 20648881 67108864
munmap bandwidth becomes 3X faster.
[1] https://lore.kernel.org/linux-mm/20240731133318.527-1-justinjiang@vivo.com/
[2] https://lore.kernel.org/linux-mm/20240730-swap-allocator-v5-0-cb9c148b9297@kernel.org/
[v-songbaohua@oppo.com: check all swaps belong to same swap_cgroup in swap_pte_batch()]
Link: https://lkml.kernel.org/r/20240815215308.55233-1-21cnbao@gmail.com
[hughd@google.com: add mem_cgroup_disabled() check]
Link: https://lkml.kernel.org/r/33f34a88-0130-5444-9b84-93198eeb50e7@google.com
[21cnbao@gmail.com: add missing zswap_invalidate()]
Link: https://lkml.kernel.org/r/20240821054921.43468-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240807215859.57491-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Accept a given struct page and add it free list.
The help is useful for physical memory scanners that want to use free
unaccepted memory.
Link: https://lkml.kernel.org/r/20240809114854.3745464-7-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
do_numa_page() and do_huge_pmd_numa_page() share a lot of common code. To
reduce redundancy, move common code to numa_migrate_prep() and rename the
function to numa_migrate_check() to reflect its functionality.
Now do_huge_pmd_numa_page() also checks shared folios to set TNF_SHARED
flag.
Link: https://lkml.kernel.org/r/20240809145906.1513458-4-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces vma.c and moves internal core VMA manipulation
functions to this file from mmap.c.
This allows us to isolate VMA functionality in a single place such that we
can create userspace testing code that invokes this functionality in an
environment where we can implement simple unit tests of core
functionality.
This patch ensures that core VMA functionality is explicitly marked as
such by its presence in mm/vma.h.
It also places the header includes required by vma.c in vma_internal.h,
which is simply imported by vma.c. This makes the VMA functionality
testable, as userland testing code can simply stub out functionality as
required.
Link: https://lkml.kernel.org/r/c77a6aafb4c42aaadb8e7271a853658cbdca2e22.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The vma_shrink() and vma_expand() functions are internal VMA manipulation
functions which we ought to abstract for use outside of memory management
code.
To achieve this, we replace shift_arg_pages() in fs/exec.c with an
invocation of a new relocate_vma_down() function implemented in mm/mmap.c,
which enables us to also move move_page_tables() and vma_iter_prev_range()
to internal.h.
The purpose of doing this is to isolate key VMA manipulation functions in
order that we can both abstract them and later render them easily
testable.
Link: https://lkml.kernel.org/r/3cfcd9ec433e032a85f636fdc0d7d98fafbd19c5.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These are core VMA manipulation functions which invoke VMA splitting and
merging and should not be directly accessed from outside of mm/.
Link: https://lkml.kernel.org/r/5efde0c6342a8860d5ffc90b415f3989fd8ed0b2.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
crashes from deferred split racing folio migration", needed by "mm:
migrate: split folio_migrate_mapping()".
|
|
A kernel warning was reported when pinning folio in CMA memory when
launching SEV virtual machine. The splat looks like:
[ 464.325306] WARNING: CPU: 13 PID: 6734 at mm/gup.c:1313 __get_user_pages+0x423/0x520
[ 464.325464] CPU: 13 PID: 6734 Comm: qemu-kvm Kdump: loaded Not tainted 6.6.33+ #6
[ 464.325477] RIP: 0010:__get_user_pages+0x423/0x520
[ 464.325515] Call Trace:
[ 464.325520] <TASK>
[ 464.325523] ? __get_user_pages+0x423/0x520
[ 464.325528] ? __warn+0x81/0x130
[ 464.325536] ? __get_user_pages+0x423/0x520
[ 464.325541] ? report_bug+0x171/0x1a0
[ 464.325549] ? handle_bug+0x3c/0x70
[ 464.325554] ? exc_invalid_op+0x17/0x70
[ 464.325558] ? asm_exc_invalid_op+0x1a/0x20
[ 464.325567] ? __get_user_pages+0x423/0x520
[ 464.325575] __gup_longterm_locked+0x212/0x7a0
[ 464.325583] internal_get_user_pages_fast+0xfb/0x190
[ 464.325590] pin_user_pages_fast+0x47/0x60
[ 464.325598] sev_pin_memory+0xca/0x170 [kvm_amd]
[ 464.325616] sev_mem_enc_register_region+0x81/0x130 [kvm_amd]
Per the analysis done by yangge, when starting the SEV virtual machine, it
will call pin_user_pages_fast(..., FOLL_LONGTERM, ...) to pin the memory.
But the page is in CMA area, so fast GUP will fail then fallback to the
slow path due to the longterm pinnalbe check in try_grab_folio().
The slow path will try to pin the pages then migrate them out of CMA area.
But the slow path also uses try_grab_folio() to pin the page, it will
also fail due to the same check then the above warning is triggered.
In addition, the try_grab_folio() is supposed to be used in fast path and
it elevates folio refcount by using add ref unless zero. We are guaranteed
to have at least one stable reference in slow path, so the simple atomic add
could be used. The performance difference should be trivial, but the
misuse may be confusing and misleading.
Redefined try_grab_folio() to try_grab_folio_fast(), and try_grab_page()
to try_grab_folio(), and use them in the proper paths. This solves both
the abuse and the kernel warning.
The proper naming makes their usecase more clear and should prevent from
abusing in the future.
peterx said:
: The user will see the pin fails, for gpu-slow it further triggers the WARN
: right below that failure (as in the original report):
:
: folio = try_grab_folio(page, page_increm - 1,
: foll_flags);
: if (WARN_ON_ONCE(!folio)) { <------------------------ here
: /*
: * Release the 1st page ref if the
: * folio is problematic, fail hard.
: */
: gup_put_folio(page_folio(page), 1,
: foll_flags);
: ret = -EFAULT;
: goto out;
: }
[1] https://lore.kernel.org/linux-mm/1719478388-31917-1-git-send-email-yangge1116@126.com/
[shy828301@gmail.com: fix implicit declaration of function try_grab_folio_fast]
Link: https://lkml.kernel.org/r/CAHbLzkowMSso-4Nufc9hcMehQsK9PNz3OSu-+eniU-2Mm-xjhA@mail.gmail.com
Link: https://lkml.kernel.org/r/20240628191458.2605553-1-yang@os.amperecomputing.com
Fixes: 57edfcfd3419 ("mm/gup: accelerate thp gup even for "pages != NULL"")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: yangge <yangge1116@126.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit 8897277acfef ("mm: support
order-1 folios in the page cache"), but there is a repeated check for
small folio (order 0) during each call of the
folio_undo_large_rmappable(), so only keep folio_order() check inside the
function.
In addition, move all the checks into header file to save a function call
for non-large-rmappable or empty deferred_list folio.
Link: https://lkml.kernel.org/r/20240521130315.46072-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/memory_hotplug: use PageOffline() instead of
PageReserved() for !ZONE_DEVICE".
This can be a considered a long-overdue follow-up to some parts of [1].
The patches are based on [2], but they are not strictly required -- just
makes it clearer why we can use adjust_managed_page_count() for memory
hotplug without going into details about highmem.
We stop initializing pages with PageReserved() in memory hotplug code --
except when dealing with ZONE_DEVICE for now. Instead, we use
PageOffline(): all pages are initialized to PageOffline() when onlining a
memory section, and only the ones actually getting exposed to the
system/page allocator will get PageOffline cleared.
This way, we enlighten memory hotplug more about PageOffline() pages and
can cleanup some hacks we have in virtio-mem code.
What about ZONE_DEVICE? PageOffline() is wrong, but we might just stop
using PageReserved() for them later by simply checking for
is_zone_device_page() at suitable places. That will be a separate patch
set / proposal.
This primarily affects virtio-mem, HV-balloon and XEN balloon. I only
briefly tested with virtio-mem, which benefits most from these cleanups.
[1] https://lore.kernel.org/all/20191024120938.11237-1-david@redhat.com/
[2] https://lkml.kernel.org/r/20240607083711.62833-1-david@redhat.com
This patch (of 3):
In preparation for further changes, let's teach __free_pages_core() about
the differences of memory hotplug handling.
Move the memory hotplug specific handling from generic_online_page() to
__free_pages_core(), use adjust_managed_page_count() on the memory hotplug
path, and spell out why memory freed via memblock cannot currently use
adjust_managed_page_count().
[david@redhat.com: add missed CONFIG_DEFERRED_STRUCT_PAGE_INIT]
Link: https://lkml.kernel.org/r/b72e6efd-fb0a-459c-b1a0-88a98e5b19e2@redhat.com
[david@redhat.com: fix up the memblock comment, per Oscar]
Link: https://lkml.kernel.org/r/2ed64218-7f3b-4302-a5dc-27f060654fe2@redhat.com
[david@redhat.com: add the parameter name also in the declaration]
Link: https://lkml.kernel.org/r/ca575956-f0dd-4fb9-a307-6b7621681ed9@redhat.com
Link: https://lkml.kernel.org/r/20240607090939.89524-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240607090939.89524-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The alloc_demote_folio can also be used for general migration including
both demotion and promotion so it'd be better to rename it from
alloc_demote_folio to alloc_migrate_folio.
Link: https://lkml.kernel.org/r/20240614030010.751-3-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "DAMON based tiered memory management for CXL memory", v6.
Introduction
============
With the advent of CXL/PCIe attached DRAM, which will be called simply as
CXL memory in this cover letter, some systems are becoming more
heterogeneous having memory systems with different latency and bandwidth
characteristics. They are usually handled as different NUMA nodes in
separate memory tiers and CXL memory is used as slow tiers because of its
protocol overhead compared to local DRAM.
In this kind of systems, we need to be careful placing memory pages on
proper NUMA nodes based on the memory access frequency. Otherwise, some
frequently accessed pages might reside on slow tiers and it makes
performance degradation unexpectedly. Moreover, the memory access
patterns can be changed at runtime.
To handle this problem, we need a way to monitor the memory access
patterns and migrate pages based on their access temperature. The
DAMON(Data Access MONitor) framework and its DAMOS(DAMON-based Operation
Schemes) can be useful features for monitoring and migrating pages. DAMOS
provides multiple actions based on DAMON monitoring results and it can be
used for proactive reclaim, which means swapping cold pages out with
DAMOS_PAGEOUT action, but it doesn't support migration actions such as
demotion and promotion between tiered memory nodes.
This series supports two new DAMOS actions; DAMOS_MIGRATE_HOT for
promotion from slow tiers and DAMOS_MIGRATE_COLD for demotion from fast
tiers. This prevents hot pages from being stuck on slow tiers, which
makes performance degradation and cold pages can be proactively demoted to
slow tiers so that the system can increase the chance to allocate more hot
pages to fast tiers.
The DAMON provides various tuning knobs but we found that the proactive
demotion for cold pages is especially useful when the system is running
out of memory on its fast tier nodes.
Our evaluation result shows that it reduces the performance slowdown
compared to the default memory policy from 11% to 3~5% when the system
runs under high memory pressure on its fast tier DRAM nodes.
DAMON configuration
===================
The specific DAMON configuration doesn't have to be in the scope of this
patch series, but some rough idea is better to be shared to explain the
evaluation result.
The DAMON provides many knobs for fine tuning but its configuration file
is generated by HMSDK[3]. It includes gen_config.py script that generates
a json file with the full config of DAMON knobs and it creates multiple
kdamonds for each NUMA node when the DAMON is enabled so that it can run
hot/cold based migration for tiered memory.
Evaluation Workload
===================
The performance evaluation is done with redis[4], which is a widely used
in-memory database and the memory access patterns are generated via
YCSB[5]. We have measured two different workloads with zipfian and latest
distributions but their configs are slightly modified to make memory usage
higher and execution time longer for better evaluation.
The idea of evaluation using these migrate_{hot,cold} actions covers
system-wide memory management rather than partitioning hot/cold pages of a
single workload. The default memory allocation policy creates pages to
the fast tier DRAM node first, then allocates newly created pages to the
slow tier CXL node when the DRAM node has insufficient free space. Once
the page allocation is done then those pages never move between NUMA
nodes. It's not true when using numa balancing, but it is not the scope
of this DAMON based tiered memory management support.
If the working set of redis can be fit fully into the DRAM node, then the
redis will access the fast DRAM only. Since the performance of DRAM only
is faster than partially accessing CXL memory in slow tiers, this
environment is not useful to evaluate this patch series.
To make pages of redis be distributed across fast DRAM node and slow CXL
node to evaluate our migrate_{hot,cold} actions, we pre-allocate some cold
memory externally using mmap and memset before launching redis-server. We
assumed that there are enough amount of cold memory in datacenters as
TMO[6] and TPP[7] papers mentioned.
The evaluation sequence is as follows.
1. Turn on DAMON with DAMOS_MIGRATE_COLD action for DRAM node and
DAMOS_MIGRATE_HOT action for CXL node. It demotes cold pages on DRAM
node and promotes hot pages on CXL node in a regular interval.
2. Allocate a huge block of cold memory by calling mmap and memset at
the fast tier DRAM node, then make the process sleep to make the fast
tier has insufficient space for redis-server.
3. Launch redis-server and load prebaked snapshot image, dump.rdb. The
redis-server consumes 52GB of anon pages and 33GB of file pages, but
due to the cold memory allocated at 2, it fails allocating the entire
memory of redis-server on the fast tier DRAM node so it partially
allocates the remaining on the slow tier CXL node. The ratio of
DRAM:CXL depends on the size of the pre-allocated cold memory.
4. Run YCSB to make zipfian or latest distribution of memory accesses to
redis-server, then measure its execution time when it's completed.
5. Repeat 4 over 50 times to measure the average execution time for each
run.
6. Increase the cold memory size then repeat goes to 2.
For each test at 4 took about a minute so repeating it 50 times almost
took about 1 hour for each test with a specific cold memory from 440GB to
500GB in 10GB increments for each evaluation. So it took about more than
10 hours for both zipfian and latest workloads to get the entire
evaluation results. Repeating the same test set multiple times doesn't
show much difference so I think it might be enough to make the result
reliable.
Evaluation Results
==================
All the result values are normalized to DRAM-only execution time because
the workload cannot be faster than DRAM-only unless the workload hits the
peak bandwidth but our redis test doesn't go beyond the bandwidth limit.
So the DRAM-only execution time is the ideal result without affected by
the gap between DRAM and CXL performance difference. The NUMA node
environment is as follows.
node0 - local DRAM, 512GB with a CPU socket (fast tier)
node1 - disabled
node2 - CXL DRAM, 96GB, no CPU attached (slow tier)
The following is the result of generating zipfian distribution to
redis-server and the numbers are averaged by 50 times of execution.
1. YCSB zipfian distribution read only workload
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DRAM-only | 1.00 - - - - - - - | 1.00
CXL-only | 1.19 - - - - - - - | 1.19
default | - 1.00 1.05 1.08 1.12 1.14 1.18 1.18 | 1.11
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 *1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 *1.06 | 1.05
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DRAM-only | 0.0 - - - - - - - | 0.0
CXL-only | 51.4 - - - - - - - | 51.4
default | - 0.6 10.6 20.5 30.5 40.5 47.6 50.4 | 28.7
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
====================+================================================+=========
Each test result is based on the execution environment as follows.
DRAM-only: redis-server uses only local DRAM memory.
CXL-only: redis-server uses only CXL memory.
default: default memory policy(MPOL_DEFAULT).
numa balancing disabled.
DAMON tiered: DAMON enabled with DAMOS_MIGRATE_COLD for DRAM
nodes and DAMOS_MIGRATE_HOT for CXL nodes.
DAMON lazy: same as DAMON tiered, but turn on DAMON just
before making memory access request via YCSB.
The above result shows the "default" execution time goes up as the size of
cold memory is increased from 440G to 500G because the more cold memory
used, the more CXL memory is used for the target redis workload and this
makes the execution time increase.
However, "DAMON tiered" and other DAMON results show less slowdown because
the DAMOS_MIGRATE_COLD action at DRAM node proactively demotes
pre-allocated cold memory to CXL node and this free space at DRAM
increases more chance to allocate hot or warm pages of redis-server to
fast DRAM node. Moreover, DAMOS_MIGRATE_HOT action at CXL node also
promotes hot pages of redis-server to DRAM node actively.
As a result, it makes more memory of redis-server stay in DRAM node
compared to "default" memory policy and this makes the performance
improvement.
Please note that the result numbers of "DAMON tiered" and "DAMON lazy" at
500G are marked with * stars, which means their test results are replaced
with reproduced tests that didn't have OOM issue.
That was needed because sometimes the test processes get OOM when DRAM has
insufficient space. The DAMOS_MIGRATE_HOT doesn't kick reclaim but just
gives up migration when there is not enough space at DRAM side. The
problem happens when there is competition between normal allocation and
migration and the migration is done before normal allocation, then the
completely unrelated normal allocation can trigger reclaim, which incurs
OOM.
Because of this issue, I have also tested more cases with
"demotion_enabled" flag enabled to make such reclaim doesn't trigger OOM,
but just demote reclaimed pages. The following test results show more
tests with "kswapd" marked.
2. YCSB zipfian distribution read only workload (with demotion_enabled true)
memory pressure with cold memory on node0 with 512GB of local DRAM.
====================+================================================+=========
| cold memory occupied by mmap and memset |
| 0G 440G 450G 460G 470G 480G 490G 500G |
====================+================================================+=========
Execution time normalized to DRAM-only values | GEOMEAN
--------------------+------------------------------------------------+---------
DAMON tiered | - 1.03 1.03 1.03 1.03 1.03 1.07 1.05 | 1.04
DAMON lazy | - 1.04 1.03 1.04 1.05 1.06 1.06 1.06 | 1.05
DAMON tiered kswapd | - 1.03 1.03 1.03 1.03 1.02 1.02 1.03 | 1.03
DAMON lazy kswapd | - 1.04 1.04 1.04 1.03 1.05 1.04 1.05 | 1.04
====================+================================================+=========
CXL usage of redis-server in GB | AVERAGE
--------------------+------------------------------------------------+---------
DAMON tiered | - 0.6 0.5 0.4 0.7 0.8 7.1 5.6 | 2.2
DAMON lazy | - 0.5 3.0 4.5 5.4 6.4 9.4 9.1 | 5.5
DAMON tiered kswapd | - 0.0 0.0 0.4 0.5 0.1 0.8 1.0 | 0.4
DAMON lazy kswapd | - 4.2 4.6 5.3 1.7 6.8 8.1 5.8 | 5.2
====================+================================================+=========
Each test result is based on the exeuction environment as follows.
DAMON tiered: same as before
DAMON lazy: same as before
DAMON tiered kswapd: same as DAMON tiered, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
DAMON lazy kswapd: same as DAMON lazy, but turn on
/sys/kernel/mm/numa/demotion_enabled to make
kswapd or direct reclaim does demotion.
The "DAMON tiered kswapd" and "DAMON lazy kswapd" didn't trigger OOM at
all unlike other tests because kswapd and direct reclaim from DRAM node
can demote reclaimed pages to CXL node independently from DAMON actions
and their results are slightly better than without having
"demotion_enabled".
In summary, the evaluation results show that DAMON memory management with
DAMOS_MIGRATE_{HOT,COLD} actions reduces the performance slowdown compared
to the "default" memory policy from 11% to 3~5% when the system runs with
high memory pressure on its fast tier DRAM nodes.
Having these DAMOS_MIGRATE_HOT and DAMOS_MIGRATE_COLD actions can make
tiered memory systems run more efficiently under high memory pressures.
This patch (of 7):
The alloc_demote_folio can be used out of vmscan.c so it'd be better to
remove static keyword from it.
Link: https://lkml.kernel.org/r/20240614030010.751-1-honggyu.kim@sk.com
Link: https://lkml.kernel.org/r/20240614030010.751-2-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are some functions only used inside mm. Move them into internal.h.
No functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-11-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405251049.hxjwX7zO-lkp@intel.com/
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and
utilize them", v2.
This patchset introduces the pte_need_soft_dirty_wp and
pmd_need_soft_dirty_wp helpers to determine if write protection is
required for softdirty tracking. These helpers enhance code readability
and improve the overall appearance.
They are then utilized in gup, mprotect, swap, and other related
functions.
This patch (of 2):
This patch introduces the pte_needs_soft_dirty_wp and
pmd_needs_soft_dirty_wp helpers to determine if write protection is
required for softdirty tracking. This can enhance code readability and
improve its overall appearance. These new helpers are then utilized in
gup, huge_memory, and mprotect.
Link: https://lkml.kernel.org/r/20240607211358.4660-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240607211358.4660-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There could arise a necessity to obtain the first pte_t from a swap pte_t
located in the middle. For instance, this may occur within the context of
do_swap_page(), where a page fault can potentially occur in any PTE of a
large folio. To address this, the following patch introduces
pte_move_swp_offset(), a function capable of bidirectional movement by a
specified delta argument. Consequently, pte_next_swp_offset() will
directly invoke it with delta = 1.
Link: https://lkml.kernel.org/r/20240529082824.150954-4-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Execs of dynamically linked binaries at 20-ish cores are bottlenecked on
the i_mmap_rwsem semaphore, while the biggest singular contributor is
free_pgd_range inducing the lock acquire back-to-back for all consecutive
mappings of a given file.
Tracing the count of said acquires while building the kernel shows:
[1, 2) 799579 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[2, 3) 0 | |
[3, 4) 3009 | |
[4, 5) 3009 | |
[5, 6) 326442 |@@@@@@@@@@@@@@@@@@@@@ |
So in particular there were 326442 opportunities to coalesce 5 acquires
into 1.
Doing so increases execs per second by 4% (~50k to ~52k) when running
the benchmark linked below.
The lock remains the main bottleneck, I have not looked at other spots
yet.
Bench can be found here:
http://apollo.backplane.com/DFlyMisc/doexec.c
$ cc -O2 -o shared-doexec doexec.c
$ ./shared-doexec $(nproc)
Note this particular test makes sure binaries are separate, but the
loader is shared.
Stats collected on the patched kernel (+ "noinline") with:
bpftrace -e 'kprobe:unlink_file_vma_batch_process
{ @ = lhist(((struct unlink_vma_file_batch *)arg0)->count, 0, 8, 1); }'
Link: https://lkml.kernel.org/r/20240521234321.359501-1-mjguzik@gmail.com
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add sl in /proc/pid/smaps to indicate vma is sealed
Link: https://lkml.kernel.org/r/20240614232014.806352-2-jeffxu@google.com
Fixes: 8be7258aad44 ("mseal: add mseal syscall")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Röttger <sroettger@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There was insufficient review and no agreement that this is the right
approach.
There are serious flaws with the implementation that make processes using
mlock() not even work with simple fork() [1] and we get reliable crashes
when rebooting.
Further, simply because we might be unmapping a single PTE of a large
mlocked folio, we shouldn't zero out the whole folio.
... especially because the code can also *corrupt* urelated memory because
kernel_init_pages(page, folio_nr_pages(folio));
Could end up writing outside of the actual folio if we work with a tail
page.
Let's revert it. Once there is agreement that this is the right approach,
the issues were fixed and there was reasonable review and proper testing,
we can consider it again.
[1] https://lkml.kernel.org/r/4da9da2f-73e4-45fd-b62f-a8a513314057@redhat.com
Link: https://lkml.kernel.org/r/20240605091710.38961-1-david@redhat.com
Fixes: ba42b524a040 ("mm: init_mlocked_on_free_v3")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20240528151340.4282-1-00107082@163.com/
Reported-by: Lance Yang <ioworker0@gmail.com>
Closes: https://lkml.kernel.org/r/20240601140917.43562-1-ioworker0@gmail.com
Acked-by: Lance Yang <ioworker0@gmail.com>
Cc: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new mseal() is an syscall on 64 bit CPU, and with following signature:
int mseal(void addr, size_t len, unsigned long flags)
addr/len: memory range.
flags: reserved.
mseal() blocks following operations for the given memory range.
1> Unmapping, moving to another location, and shrinking the size,
via munmap() and mremap(), can leave an empty space, therefore can
be replaced with a VMA with a new set of attributes.
2> Moving or expanding a different VMA into the current location,
via mremap().
3> Modifying a VMA via mmap(MAP_FIXED).
4> Size expansion, via mremap(), does not appear to pose any specific
risks to sealed VMAs. It is included anyway because the use case is
unclear. In any case, users can rely on merging to expand a sealed VMA.
5> mprotect() and pkey_mprotect().
6> Some destructive madvice() behaviors (e.g. MADV_DONTNEED) for anonymous
memory, when users don't have write permission to the memory. Those
behaviors can alter region contents by discarding pages, effectively a
memset(0) for anonymous memory.
Following input during RFC are incooperated into this patch:
Jann Horn: raising awareness and providing valuable insights on the
destructive madvise operations.
Linus Torvalds: assisting in defining system call signature and scope.
Liam R. Howlett: perf optimization.
Theo de Raadt: sharing the experiences and insight gained from
implementing mimmutable() in OpenBSD.
Finally, the idea that inspired this patch comes from Stephen Röttger's
work in Chrome V8 CFI.
[jeffxu@chromium.org: add branch prediction hint, per Pedro]
Link: https://lkml.kernel.org/r/20240423192825.1273679-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240415163527.626541-3-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All reclaim_pages() callers are setting 'ignore_references' parameter
'true'. In other words, the parameter is not really being used. Remove
the argument to make it simple.
Link: https://lkml.kernel.org/r/20240429224451.67081-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Removes two calls to compound_head(). Move the prototype to internal.h;
we definitely don't want code outside mm using it.
Link: https://lkml.kernel.org/r/20240412193510.2356957-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit adds the any_dirty pointer as an optional parameter to
folio_pte_batch() function. By using both the any_young and any_dirty
pointers, madvise_free can make smarter decisions about whether to clear
the PTEs when marking large folios as lazyfree.
Link: https://lkml.kernel.org/r/20240418134435.6092-4-ioworker0@gmail.com
Signed-off-by: Lance Yang <ioworker0@gmail.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's track the mapcount of large folios in a single value. The mapcount
of a large folio currently corresponds to the sum of the entire mapcount
and all page mapcounts.
This sum is what we actually want to know in folio_mapcount() and it is
also sufficient for implementing folio_mapped().
With PTE-mapped THP becoming more important and more widely used, we want
to avoid looping over all pages of a folio just to obtain the mapcount of
large folios. The comment "In the common case, avoid the loop when no
pages mapped by PTE" in folio_total_mapcount() does no longer hold for
mTHP that are always mapped by PTE.
Further, we are planning on using folio_mapcount() more frequently, and
might even want to remove page mapcounts for large folios in some kernel
configs. Therefore, allow for reading the mapcount of large folios
efficiently and atomically without looping over any pages.
Maintain the mapcount also for hugetlb pages for simplicity. Use the new
mapcount to implement folio_mapcount() and folio_mapped(). Make
page_mapped() simply call folio_mapped(). We can now get rid of
folio_large_is_mapped().
_nr_pages_mapped is now only used in rmap code and for debugging purposes.
Keep folio_nr_pages_mapped() around, but document that its use should be
limited to rmap internals and debugging purposes.
This change implies one additional atomic add/sub whenever
mapping/unmapping (parts of) a large folio.
As we now batch RMAP operations for PTE-mapped THP during fork(), during
unmap/zap, and when PTE-remapping a PMD-mapped THP, and we adjust the
large mapcount for a PTE batch only once, the added overhead in the common
case is small. Only when unmapping individual pages of a large folio
(e.g., during COW), the overhead might be bigger in comparison, but it's
essentially one additional atomic operation.
Note that before the new mapcount would overflow, already our refcount
would overflow: each mapping requires a folio reference. Extend the
focumentation of folio_mapcount().
Link: https://lkml.kernel.org/r/20240409192301.907377-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Chang <richardycc@google.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Both callers already have a folio; pass it in and save a few calls to
compound_head().
Link: https://lkml.kernel.org/r/20240405153228.2563754-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rework madvise_cold_or_pageout_pte_range() to avoid splitting any large
folio that is fully and contiguously mapped in the pageout/cold vm range.
This change means that large folios will be maintained all the way to swap
storage. This both improves performance during swap-out, by eliding the
cost of splitting the folio, and sets us up nicely for maintaining the
large folio when it is swapped back in (to be covered in a separate
series).
Folios that are not fully mapped in the target range are still split, but
note that behavior is changed so that if the split fails for any reason
(folio locked, shared, etc) we now leave it as is and move to the next pte
in the range and continue work on the proceeding folios. Previously any
failure of this sort would cause the entire operation to give up and no
folios mapped at higher addresses were paged out or made cold. Given
large folios are becoming more common, this old behavior would have likely
lead to wasted opportunities.
While we are at it, change the code that clears young from the ptes to use
ptep_test_and_clear_young(), via the new mkold_ptes() batch helper
function. This is more efficent than get_and_clear/modify/set, especially
for contpte mappings on arm64, where the old approach would require
unfolding/refolding and the new approach can be done in place.
Link: https://lkml.kernel.org/r/20240408183946.2991168-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that we no longer have a convenient flag in the cluster to determine
if a folio is large, free_swap_and_cache() will take a reference and lock
a large folio much more often, which could lead to contention and (e.g.)
failure to split large folios, etc.
Let's solve that problem by batch freeing swap and cache with a new
function, free_swap_and_cache_nr(), to free a contiguous range of swap
entries together. This allows us to first drop a reference to each swap
slot before we try to release the cache folio. This means we only try to
release the folio once, only taking the reference and lock once - much
better than the previous 512 times for the 2M THP case.
Contiguous swap entries are gathered in zap_pte_range() and
madvise_free_pte_range() in a similar way to how present ptes are already
gathered in zap_pte_range().
While we are at it, let's simplify by converting the return type of both
functions to void. The return value was used only by zap_pte_range() to
print a bad pte, and was ignored by everyone else, so the extra reporting
wasn't exactly guaranteed. We will still get the warning with most of the
information from get_swap_device(). With the batch version, we wouldn't
know which pte was bad anyway so could print the wrong one.
[ryan.roberts@arm.com: fix a build warning on parisc]
Link: https://lkml.kernel.org/r/20240409111840.3173122-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240408183946.2991168-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Gao Xiang <xiang@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
With all callers converted, we can use the nice shorter name. Take this
opportunity to reorder the arguments to the logical order (larger object
first).
Link: https://lkml.kernel.org/r/20240328225831.1765286-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Convert the three remaining callers to call vma_pgoff_address() directly.
This removes an ambiguity where we'd check just one page if passed a tail
page and all N pages if passed a head page.
Also add better kernel-doc for vma_pgoff_address().
Link: https://lkml.kernel.org/r/20240328225831.1765286-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implements the "init_mlocked_on_free" boot option. When this boot option
is enabled, any mlock'ed pages are zeroed on free. If
the pages are munlock'ed beforehand, no initialization takes place.
This boot option is meant to combat the performance hit of
"init_on_free" as reported in commit 6471384af2a6 ("mm: security:
introduce init_on_alloc=1 and init_on_free=1 boot options"). With
"init_mlocked_on_free=1" only relevant data is freed while everything
else is left untouched by the kernel. Correspondingly, this patch
introduces no performance hit for unmapping non-mlock'ed memory. The
unmapping overhead for purely mlocked memory was measured to be
approximately 13%. Realistically, most systems mlock only a fraction of
the total memory so the real-world system overhead should be close to
zero.
Optimally, userspace programs clear any key material or other
confidential memory before exit and munlock the according memory
regions. If a program crashes, userspace key managers fail to do this
job. Accordingly, no munlock operations are performed so the data is
caught and zeroed by the kernel. Should the program not crash, all
memory will ideally be munlocked so no overhead is caused.
CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON can be set to enable
"init_mlocked_on_free" by default.
Link: https://lkml.kernel.org/r/20240329145605.149917-1-yjnworkstation@gmail.com
Signed-off-by: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: York Jasper Niebuhr <yjnworkstation@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PageAnonExclusive() used to forbid tail pages for hugetlbfs, as that used
to be called mostly in hugetlb specific paths and the head page was
guaranteed.
As we move forward towards merging hugetlb paths into generic mm, we may
start to pass in tail hugetlb pages (when with cont-pte/cont-pmd huge
pages) for such check. Allow it to properly fetch the head, in which case
the anon-exclusiveness of the head will always represents the tail page.
There's already a sign of it when we look at the GUP-fast which already
contain the hugetlb processing altogether: we used to have a specific
commit 5805192c7b72 ("mm/gup: handle cont-PTE hugetlb pages correctly in
gup_must_unshare() via GUP-fast") covering that area. Now with this more
generic change, that can also go away.
[akpm@linux-foundation.org: simplify PageAnonExclusive(), per Matthew]
Link: https://lkml.kernel.org/r/Zg3u5Sh9EbbYPhaI@casper.infradead.org
Link: https://lkml.kernel.org/r/20240403013249.1418299-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Replace pmd_trans_huge() with pmd_leaf() to also cover pmd_huge() as long
as enabled.
FOLL_TOUCH and FOLL_SPLIT_PMD only apply to THP, not yet huge.
Since now follow_trans_huge_pmd() can process hugetlb pages, renaming it
into follow_huge_pmd() to match what it does. Move it into gup.c so not
depend on CONFIG_THP.
When at it, move the ctx->page_mask setup into follow_huge_pmd(), only set
it when the page is valid. It was not a bug to set it before even if GUP
failed (page==NULL), because follow_page_mask() callers always ignores
page_mask if so. But doing so makes the code cleaner.
[peterx@redhat.com: allow follow_pmd_mask() to take hugetlb tail pages]
Link: https://lkml.kernel.org/r/20240403013249.1418299-3-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-12-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Teach follow_pud_mask() to be able to handle normal PUD pages like
hugetlb.
Rename follow_devmap_pud() to follow_huge_pud() so that it can process
either huge devmap or hugetlb. Move it out of TRANSPARENT_HUGEPAGE_PUD
and and huge_memory.c (which relies on CONFIG_THP). Switch to pud_leaf()
to detect both cases in the slow gup.
In the new follow_huge_pud(), taking care of possible CoR for hugetlb if
necessary. touch_pud() needs to be moved out of huge_memory.c to be
accessable from gup.c even if !THP.
Since at it, optimize the non-present check by adding a pud_present()
early check before taking the pgtable lock, failing the follow_page()
early if PUD is not present: that is required by both devmap or hugetlb.
Use pud_huge() to also cover the pud_devmap() case.
One more trivial thing to mention is, introduce "pud_t pud" in the code
paths along the way, so the code doesn't dereference *pudp multiple time.
Not only because that looks less straightforward, but also because if the
dereference really happened, it's not clear whether there can be race to
see different *pudp values when it's being modified at the same time.
Setting ctx->page_mask properly for a PUD entry. As a side effect, this
patch should also be able to optimize devmap GUP on PUD to be able to jump
over the whole PUD range, but not yet verified. Hugetlb already can do so
prior to this patch.
Link: https://lkml.kernel.org/r/20240327152332.950956-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
None of the functions called by page_mapped() modify the page or folio, so
mark them all as const.
Link: https://lkml.kernel.org/r/20240326171045.410737-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are two types of iterators mas and vmi in the current code. If the
maple tree comes from the mm structure, we can use the vma iterator.
Avoid using mas directly as possible.
Keep using mas for the mt_detach tree, since it doesn't come from the mm
structure.
Remove as many uses of mas as possible, but we will still have a few that
must be passed through in unmap_vmas() and free_pgtables().
Also introduce vma_iter_reset, vma_iter_{prev, next}_range_limit and
vma_iter_area_{lowest, highest} helper functions for using the vma
interator.
Link: https://lkml.kernel.org/r/20240325063258.1437618-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit d0637c505f8a1 ("arm64: enable THP_SWAP for arm64") brings up
THP_SWAP on ARM64, but it doesn't enable THP_SWP on hardware with MTE as
the MTE code works with the assumption tags save/restore is always
handling a folio with only one page.
The limitation should be removed as more and more ARM64 SoCs have this
feature. Co-existence of MTE and THP_SWAP becomes more and more
important.
This patch makes MTE tags saving support large folios, then we don't need
to split large folios into base pages for swapping out on ARM64 SoCs with
MTE any more.
arch_prepare_to_swap() should take folio rather than page as parameter
because we support THP swap-out as a whole. It saves tags for all pages
in a large folio.
As now we are restoring tags based-on folio, in arch_swap_restore(), we
may increase some extra loops and early-exitings while refaulting a large
folio which is still in swapcache in do_swap_page(). In case a large
folio has nr pages, do_swap_page() will only set the PTE of the particular
page which is causing the page fault. Thus do_swap_page() runs nr times,
and each time, arch_swap_restore() will loop nr times for those subpages
in the folio. So right now the algorithmic complexity becomes O(nr^2).
Once we support mapping large folios in do_swap_page(), extra loops and
early-exitings will decrease while not being completely removed as a large
folio might get partially tagged in corner cases such as, 1. a large
folio in swapcache can be partially unmapped, thus, MTE tags for the
unmapped pages will be invalidated; 2. users might use mprotect() to set
MTEs on a part of a large folio.
arch_thp_swp_supported() is dropped since ARM64 MTE was the only one who
needed it.
Link: https://lkml.kernel.org/r/20240322114136.61386-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "make the hugetlb migration strategy consistent", v2.
As discussed in previous thread [1], there is an inconsistency when
handling hugetlb migration. When handling the migration of freed hugetlb,
it prevents fallback to other NUMA nodes in
alloc_and_dissolve_hugetlb_folio(). However, when dealing with in-use
hugetlb, it allows fallback to other NUMA nodes in
alloc_hugetlb_folio_nodemask(), which can break the per-node hugetlb pool
and might result in unexpected failures when node bound workloads doesn't
get what is asssumed available.
This patchset tries to make the hugetlb migration strategy more clear
and consistent. Please find details in each patch.
[1]
https://lore.kernel.org/all/6f26ce22d2fcd523418a085f2c588fe0776d46e7.1706794035.git.baolin.wang@linux.alibaba.com/
This patch (of 2):
To support different hugetlb allocation strategies during hugetlb
migration based on various migration reasons, record the migration reason
in the migration_target_control structure as a preparation.
Link: https://lkml.kernel.org/r/cover.1709719720.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/7b95d4981e07211f57139fc5b1f7ce91b920cee4.1709719720.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Free page accounting currently happens a bit too high up the call stack,
where it has to deal with guard pages, compaction capturing, block
stealing and even page isolation. This is subtle and fragile, and makes
it difficult to hack on the code.
Now that type violations on the freelists have been fixed, push the
accounting down to where pages enter and leave the freelist.
[hannes@cmpxchg.org: undo unrelated drive-by line wrap]
Link: https://lkml.kernel.org/r/20240327185736.GA7597@cmpxchg.org
[hannes@cmpxchg.org: remove unused page parameter from account_freepages()]
Link: https://lkml.kernel.org/r/20240327185831.GB7597@cmpxchg.org
[baolin.wang@linux.alibaba.com: fix free page accounting]
Link: https://lkml.kernel.org/r/a2a48baca69f103aa431fd201f8a06e3b95e203d.1712648441.git.baolin.wang@linux.alibaba.com
[andriy.shevchenko@linux.intel.com: avoid defining unused function]
Link: https://lkml.kernel.org/r/20240423161506.2637177-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20240320180429.678181-11-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page isolation currently sets MIGRATE_ISOLATE on a block, then drops
zone->lock and scans the block for straddling buddies to split up.
Because this happens non-atomically wrt the page allocator, it's possible
for allocations to get a buddy whose first block is a regular pcp
migratetype but whose tail is isolated. This means that in certain cases
memory can still be allocated after isolation. It will also trigger the
freelist type hygiene warnings in subsequent patches.
start_isolate_page_range()
isolate_single_pageblock()
set_migratetype_isolate(tail)
lock zone->lock
move_freepages_block(tail) // nop
set_pageblock_migratetype(tail)
unlock zone->lock
__rmqueue_smallest()
del_page_from_freelist(head)
expand(head, head_mt)
WARN(head_mt != tail_mt)
start_pfn = ALIGN_DOWN(MAX_ORDER_NR_PAGES)
for (pfn = start_pfn, pfn < end_pfn)
if (PageBuddy())
split_free_page(head)
Introduce a variant of move_freepages_block() provided by the allocator
specifically for page isolation; it moves free pages, converts the block,
and handles the splitting of straddling buddies while holding zone->lock.
The allocator knows that pageblocks and buddies are always naturally
aligned, which means that buddies can only straddle blocks if they're
actually >pageblock_order. This means the search-and-split part can be
simplified compared to what page isolation used to do.
Also tighten up the page isolation code around the expectations of which
pages can be large, and how they are freed.
Based on extensive discussions with and invaluable input from Zi Yan.
[hannes@cmpxchg.org: work around older gcc warning]
Link: https://lkml.kernel.org/r/20240321142426.GB777580@cmpxchg.org
Link: https://lkml.kernel.org/r/20240320180429.678181-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that prep_compound_page() initialises folio->_deferred_list,
folio_prep_large_rmappable()'s only purpose is to set the large_rmappable
flag, so inline it into the two callers. Take the opportunity to convert
the large_rmappable definition from PAGEFLAG to FOLIO_FLAG and remove the
existance of PageTestLargeRmappable and friends.
Link: https://lkml.kernel.org/r/20240321142448.1645400-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Various significant MM patches".
These patches all interact in annoying ways which make it tricky to send
them out in any way other than a big batch, even though there's not really
an overarching theme to connect them.
The big effects of this patch series are:
- folio_test_hugetlb() becomes reliable, even when called without a
page reference
- We free up PG_slab, and we could always use more page flags
- We no longer need to check PageSlab before calling page_mapcount()
This patch (of 9):
For compound pages which are at least order-2 (and hence have a
deferred_list), initialise it and then we can check at free that the page
is not part of a deferred list. We recently found this useful to rule out
a source of corruption.
[peterx@redhat.com: always initialise folio->_deferred_list]
Link: https://lkml.kernel.org/r/20240417211836.2742593-2-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240321142448.1645400-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20240321142448.1645400-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Allow migrate on protnone reference with MPOL_PREFERRED_MANY
policy:, v4.
This patchset is to optimize the cross-socket memory access with
MPOL_PREFERRED_MANY policy.
To test this patch we ran the following test on a 3 node system.
Node 0 - 2GB - Tier 1
Node 1 - 11GB - Tier 1
Node 6 - 10GB - Tier 2
Below changes are made to memcached to set the memory policy,
It select Node0 and Node1 as preferred nodes.
#include <numaif.h>
#include <numa.h>
unsigned long nodemask;
int ret;
nodemask = 0x03;
ret = set_mempolicy(MPOL_PREFERRED_MANY | MPOL_F_NUMA_BALANCING,
&nodemask, 10);
/* If MPOL_F_NUMA_BALANCING isn't supported,
* fall back to MPOL_PREFERRED_MANY */
if (ret < 0 && errno == EINVAL){
printf("set mem policy normal\n");
ret = set_mempolicy(MPOL_PREFERRED_MANY, &nodemask, 10);
}
if (ret < 0) {
perror("Failed to call set_mempolicy");
exit(-1);
}
Test Procedure:
===============
1. Make sure memory tiring and demotion are enabled.
2. Start memcached.
# ./memcached -b 100000 -m 204800 -u root -c 1000000 -t 7
-d -s "/tmp/memcached.sock"
3. Run memtier_benchmark to store 3200000 keys.
#./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary
--threads=1 --pipeline=1 --ratio=1:0 --key-pattern=S:S --key-minimum=1
--key-maximum=3200000 -n allkeys -c 1 -R -x 1 -d 1024
4. Start a memory eater on node 0 and 1. This will demote all memcached
pages to node 6.
5. Make sure all the memcached pages got demoted to lower tier by reading
/proc/<memcaced PID>/numa_maps.
# cat /proc/2771/numa_maps
---
default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64
default anon=1009 dirty=1009 active=0 N6=1009 kernelpagesize_kB=64
---
6. Kill memory eater.
7. Read the pgpromote_success counter.
8. Start reading the keys by running memtier_benchmark.
#./memtier_benchmark -S "/tmp/memcached.sock" --protocol=memcache_binary
--pipeline=1 --distinct-client-seed --ratio=0:3 --key-pattern=R:R
--key-minimum=1 --key-maximum=3200000 -n allkeys
--threads=64 -c 1 -R -x 6
9. Read the pgpromote_success counter.
Test Results:
=============
Without Patch
------------------
1. pgpromote_success before test
Node 0: pgpromote_success 11
Node 1: pgpromote_success 140974
pgpromote_success after test
Node 0: pgpromote_success 11
Node 1: pgpromote_success 140974
2. Memtier-benchmark result.
AGGREGATED AVERAGE RESULTS (6 runs)
==================================================================
Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency
------------------------------------------------------------------
Sets 0.00 --- --- --- ---
Gets 305792.03 305791.93 0.10 0.18949 0.16700
Waits 0.00 --- --- --- ---
Totals 305792.03 305791.93 0.10 0.18949 0.16700
======================================
p99 Latency p99.9 Latency KB/sec
-------------------------------------
--- --- 0.00
0.44700 1.71100 11542.69
--- --- ---
0.44700 1.71100 11542.69
With Patch
---------------
1. pgpromote_success before test
Node 0: pgpromote_success 5
Node 1: pgpromote_success 89386
pgpromote_success after test
Node 0: pgpromote_success 57895
Node 1: pgpromote_success 141463
2. Memtier-benchmark result.
AGGREGATED AVERAGE RESULTS (6 runs)
====================================================================
Type Ops/sec Hits/sec Misses/sec Avg. Latency p50 Latency
--------------------------------------------------------------------
Sets 0.00 --- --- --- ---
Gets 521942.24 521942.07 0.17 0.11459 0.10300
Waits 0.00 --- --- --- ---
Totals 521942.24 521942.07 0.17 0.11459 0.10300
=======================================
p99 Latency p99.9 Latency KB/sec
---------------------------------------
--- --- 0.00
0.23100 0.31900 19701.68
--- --- ---
0.23100 0.31900 19701.68
Test Result Analysis:
=====================
1. With patch we could observe pages are getting promoted.
2. Memtier-benchmark results shows that, with the patch,
performance has increased more than 50%.
Ops/sec without fix - 305792.03
Ops/sec with fix - 521942.24
This patch (of 2):
Instead of using 'cpu_to_node()', we use 'numa_node_id()', which is
quicker. smp_processor_id is guaranteed to be stable in the
'mpol_misplaced()' function because it is called with ptl held.
lockdep_assert_held was added to ensure that.
No functional change in this patch.
[donettom@linux.ibm.com: add "* @vmf: structure describing the fault" comment]
Link: https://lkml.kernel.org/r/d8b993ea9dccfac0bc3ed61d3a81f4ac5f376e46.1711002865.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/cover.1711373653.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/6059f034f436734b472d066db69676fb3a459864.1711373653.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/cover.1709909210.git.donettom@linux.ibm.com
Link: https://lkml.kernel.org/r/744646531af02cc687cde8ae788fb1779e99d02c.1709909210.git.donettom@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.
While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.
A reproducer can be found at [1].
The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().
__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.
So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().
But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.
As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.
With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.
[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/
Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes: 4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Closes: https://lore.kernel.org/all/20240311223815.GW1927156@frogsfrogsfrogs/
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
madvise, mprotect and some others might need folio_pte_batch to check if a
range of PTEs are completely mapped to a large folio with contiguous
physical addresses. Let's make it available in mm/internal.h.
While at it, add proper kernel doc and sanity-check more input parameters
using two additional VM_WARN_ON_FOLIO().
[21cnbao@gmail.com: build fix]
Link: https://lkml.kernel.org/r/CAGsJ_4wWzG-37D82vqP_zt+Fcbz+URVe5oXLBc4M5wbN8A_gpQ@mail.gmail.com
[david@redhat.com: improve the doc for the exported func]
Link: https://lkml.kernel.org/r/20240227104201.337988-1-21cnbao@gmail.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
