summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2024-11-14Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNCLuiz Augusto von Dentz
This adds the initial implementation of MGMT_OP_HCI_CMD_SYNC as documented in mgmt-api (BlueZ tree): Send HCI command and wait for event Command =========================================== Command Code: 0x005B Controller Index: <controller id> Command Parameters: Opcode (2 Octets) Event (1 Octet) Timeout (1 Octet) Parameter Length (2 Octets) Parameter (variable) Return Parameters: Response (1-variable Octets) This command may be used to send a HCI command and wait for an (optional) event. The HCI command is specified by the Opcode, any arbitrary is supported including vendor commands, but contrary to the like of Raw/User channel it is run as an HCI command send by the kernel since it uses its command synchronization thus it is possible to wait for a specific event as a response. Setting event to 0x00 will cause the command to wait for either HCI Command Status or HCI Command Complete. Timeout is specified in seconds, setting it to 0 will cause the default timeout to be used. Possible errors: Failed Invalid Parameters Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: fix use-after-free in device_for_each_child()Dmitry Antipov
Syzbot has reported the following KASAN splat: BUG: KASAN: slab-use-after-free in device_for_each_child+0x18f/0x1a0 Read of size 8 at addr ffff88801f605308 by task kbnepd bnep0/4980 CPU: 0 UID: 0 PID: 4980 Comm: kbnepd bnep0 Not tainted 6.12.0-rc4-00161-gae90f6a6170d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 ? device_for_each_child+0x18f/0x1a0 print_report+0x13a/0x4cb ? __virt_addr_valid+0x5e/0x590 ? __phys_addr+0xc6/0x150 ? device_for_each_child+0x18f/0x1a0 kasan_report+0xda/0x110 ? device_for_each_child+0x18f/0x1a0 ? __pfx_dev_memalloc_noio+0x10/0x10 device_for_each_child+0x18f/0x1a0 ? __pfx_device_for_each_child+0x10/0x10 pm_runtime_set_memalloc_noio+0xf2/0x180 netdev_unregister_kobject+0x1ed/0x270 unregister_netdevice_many_notify+0x123c/0x1d80 ? __mutex_trylock_common+0xde/0x250 ? __pfx_unregister_netdevice_many_notify+0x10/0x10 ? trace_contention_end+0xe6/0x140 ? __mutex_lock+0x4e7/0x8f0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x12/0xc0 ? unregister_netdev+0x12/0x30 unregister_netdevice_queue+0x30d/0x3f0 ? __pfx_unregister_netdevice_queue+0x10/0x10 ? __pfx_down_write+0x10/0x10 unregister_netdev+0x1c/0x30 bnep_session+0x1fb3/0x2ab0 ? __pfx_bnep_session+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_woken_wake_function+0x10/0x10 ? __kthread_parkme+0x132/0x200 ? __pfx_bnep_session+0x10/0x10 ? kthread+0x13a/0x370 ? __pfx_bnep_session+0x10/0x10 kthread+0x2b7/0x370 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x48/0x80 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 4974: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kmalloc_noprof+0x1d1/0x440 hci_alloc_dev_priv+0x1d/0x2820 __vhci_create_device+0xef/0x7d0 vhci_write+0x2c7/0x480 vfs_write+0x6a0/0xfc0 ksys_write+0x12f/0x260 do_syscall_64+0xc7/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 4979: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x4f/0x70 kfree+0x141/0x490 hci_release_dev+0x4d9/0x600 bt_host_release+0x6a/0xb0 device_release+0xa4/0x240 kobject_put+0x1ec/0x5a0 put_device+0x1f/0x30 vhci_release+0x81/0xf0 __fput+0x3f6/0xb30 task_work_run+0x151/0x250 do_exit+0xa79/0x2c30 do_group_exit+0xd5/0x2a0 get_signal+0x1fcd/0x2210 arch_do_signal_or_restart+0x93/0x780 syscall_exit_to_user_mode+0x140/0x290 do_syscall_64+0xd4/0x250 entry_SYSCALL_64_after_hwframe+0x77/0x7f In 'hci_conn_del_sysfs()', 'device_unregister()' may be called when an underlying (kobject) reference counter is greater than 1. This means that reparenting (happened when the device is actually freed) is delayed and, during that delay, parent controller device (hciX) may be deleted. Since the latter may create a dangling pointer to freed parent, avoid that scenario by reparenting to NULL explicitly. Reported-by: syzbot+6cf5652d3df49fae2e3f@syzkaller.appspotmail.com Tested-by: syzbot+6cf5652d3df49fae2e3f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6cf5652d3df49fae2e3f Fixes: a85fb91e3d72 ("Bluetooth: Fix double free in hci_conn_cleanup") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_core: Fix calling mgmt_device_connectedLuiz Augusto von Dentz
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until BT_CONNECTED state is reached") there is no long the need to call mgmt_device_connected as ACL data will be queued until BT_CONNECTED state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458 Link: https://github.com/bluez/bluez/issues/1014 Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Send BIG Create Sync via hci_syncIulia Tanasescu
Before issuing the LE BIG Create Sync command, an available BIG handle is chosen by iterating through the conn_hash list and finding the first unused value. If a BIG is terminated, the associated hcons are removed from the list and the LE BIG Terminate Sync command is sent via hci_sync queue. However, a new LE BIG Create sync command might be issued via hci_send_cmd, before the previous BIG sync was terminated. This can cause the same BIG handle to be reused and the LE BIG Create Sync to fail with Command Disallowed. < HCI Command: LE Broadcast Isochronous Group Create Sync (0x08|0x006b) BIG Handle: 0x00 BIG Sync Handle: 0x0002 Encryption: Unencrypted (0x00) Broadcast Code[16]: 00000000000000000000000000000000 Maximum Number Subevents: 0x00 Timeout: 20000 ms (0x07d0) Number of BIS: 1 BIS ID: 0x01 > HCI Event: Command Status (0x0f) plen 4 LE Broadcast Isochronous Group Create Sync (0x08|0x006b) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: LE Broadcast Isochronous Group Terminate Sync (0x08|0x006c) BIG Handle: 0x00 This commit fixes the ordering of the LE BIG Create Sync/LE BIG Terminate Sync commands, to make sure that either the previous BIG sync is terminated before reusing the handle, or that a new handle is chosen for a new sync. Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_conn: Remove alloc from critical sectionIulia Tanasescu
This removes the kzalloc memory allocation inside critical section in create_pa_sync, fixing the following message that appears when the kernel is compiled with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321 Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Use kref to track lifetime of iso_connLuiz Augusto von Dentz
This make use of kref to keep track of reference of iso_conn which allows better tracking of its lifetime with usage of things like kref_get_unless_zero in a similar way as used in l2cap_chan. In addition to it remove call to iso_sock_set_timer on iso_sock_disconn since at that point it is useless to set a timer as the sk will be freed there is nothing to be done in iso_sock_timeout. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: SCO: Use kref to track lifetime of sco_connLuiz Augusto von Dentz
This make use of kref to keep track of reference of sco_conn which allows better tracking of its lifetime with usage of things like kref_get_unless_zero in a similar way as used in l2cap_chan. In addition to it remove call to sco_sock_set_timer on __sco_sock_close since at that point it is useless to set a timer as the sk will be freed there is nothing to be done in sco_sock_timeout. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slaveIulia Tanasescu
Currently, hci_conn_hash_lookup_big only checks for BIS master connections, by filtering out connections with the destination address set. This commit updates this function to also consider BIS slave connections, since it is also used for a Broadcast Receiver to set an available BIG handle before issuing the LE BIG Create Sync command. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pendingIulia Tanasescu
The Bluetooth Core spec does not allow a LE BIG Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2586). In order to avoid this issue, the HCI_CONN_CREATE_BIG_SYNC was added to mark that the LE BIG Create Sync command has been sent for a hcon. Once the BIG Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Fix matching parent socket for BIS slaveIulia Tanasescu
Currently, when a BIS slave connection is notified to the ISO layer, the parent socket is tried to be matched by the HCI_EVT_LE_BIG_SYNC_ESTABILISHED event. However, a BIS slave connection is notified to the ISO layer after the Command Complete for the LE Setup ISO Data Path command is received. This causes the parent to be incorrectly matched if multiple listen sockets are present. This commit adds a fix by matching the parent based on the BIG handle set in the notified connection. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pendingIulia Tanasescu
The Bluetooth Core spec does not allow a LE PA Create sync command to be sent to Controller if another one is pending (Vol 4, Part E, page 2493). In order to avoid this issue, the HCI_CONN_CREATE_PA_SYNC was added to mark that the LE PA Create Sync command has been sent for a hcon. Once the PA Sync Established event is received, the hcon flag is erased and the next pending hcon is handled. Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Support new quirks for ATS2851Danil Pylaev
This adds support for quirks for broken extended create connection, and write auth payload timeout. Signed-off-by: Danil Pylaev <danstiv404@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: Fix type of len in rfcomm_sock_getsockopt{,_old}()Andrej Shadura
Commit 9bf4e919ccad worked around an issue introduced after an innocuous optimisation change in LLVM main: > len is defined as an 'int' because it is assigned from > '__user int *optlen'. However, it is clamped against the result of > sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit > platforms). This is done with min_t() because min() requires compatible > types, which results in both len and the result of sizeof() being casted > to 'unsigned int', meaning len changes signs and the result of sizeof() > is truncated. From there, len is passed to copy_to_user(), which has a > third parameter type of 'unsigned long', so it is widened and changes > signs again. This excessive casting in combination with the KCSAN > instrumentation causes LLVM to fail to eliminate the __bad_copy_from() > call, failing the build. The same issue occurs in rfcomm in functions rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old. Change the type of len to size_t in both rfcomm_sock_getsockopt and rfcomm_sock_getsockopt_old and replace min_t() with min(). Cc: stable@vger.kernel.org Co-authored-by: Aleksei Vetrov <vvvvvv@google.com> Improves: 9bf4e919ccad ("Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()") Link: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_core: Fix not checking skb length on hci_scodata_packetLuiz Augusto von Dentz
This fixes not checking if skb really contains an SCO header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_core: Fix not checking skb length on hci_acldata_packetLuiz Augusto von Dentz
This fixes not checking if skb really contains an ACL header otherwise the code may attempt to access some uninitilized/invalid memory past the valid skb->data. Reported-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Tested-by: syzbot+6ea290ba76d8c1eb1ac2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6ea290ba76d8c1eb1ac2 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_conn: Use disable_delayed_work_syncLuiz Augusto von Dentz
This makes use of disable_delayed_work_sync instead cancel_delayed_work_sync as it not only cancel the ongoing work but also disables new submit which is disarable since the object holding the work is about to be freed. Reported-by: syzbot+2446dd3cb07277388db6@syzkaller.appspotmail.com Tested-by: syzbot+2446dd3cb07277388db6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2446dd3cb07277388db6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-14Bluetooth: hci_conn: Reduce hci_conn_drop() calls in two functionsMarkus Elfring
An hci_conn_drop() call was immediately used after a null pointer check for an hci_conn_link() call in two function implementations. Thus call such a function only once instead directly before the checks. This issue was transformed by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-12Bluetooth: hci_core: Fix calling mgmt_device_connectedLuiz Augusto von Dentz
Since 61a939c68ee0 ("Bluetooth: Queue incoming ACL data until BT_CONNECTED state is reached") there is no long the need to call mgmt_device_connected as ACL data will be queued until BT_CONNECTED state. Link: https://bugzilla.kernel.org/show_bug.cgi?id=219458 Link: https://github.com/bluez/bluez/issues/1014 Fixes: 333b4fd11e89 ("Bluetooth: L2CAP: Fix uaf in l2cap_connect") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc6). Conflicts: drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd") 188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links") https://lore.kernel.org/all/20241028123621.7bbb131b@canb.auug.org.au/ net/mac80211/cfg.c c4382d5ca1af ("wifi: mac80211: update the right link for tx power") 8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx") drivers/net/ethernet/intel/ice/ice_ptp_hw.h 6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM") e4291b64e118 ("ice: Align E810T GPIO to other products") ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions") ac532f4f4251 ("ice: Cleanup unused declarations") https://lore.kernel.org/all/20241030120524.1ee1af18@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-30Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecsSungwoo Kim
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-30jiffies: Define secs_to_jiffies()Easwar Hariharan
secs_to_jiffies() is defined in hci_event.c and cannot be reused by other call sites. Hoist it into the core code to allow conversion of the ~1150 usages of msecs_to_jiffies() that either: - use a multiplier value of 1000 or equivalently MSEC_PER_SEC, or - have timeouts that are denominated in seconds (i.e. end in 000) It's implemented as a macro to allow usage in static initializers. This will also allow conversion of yet more sites that use (sec * HZ) directly, and improve their readability. Suggested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Link: https://lore.kernel.org/all/20241030-open-coded-timeouts-v3-1-9ba123facf88@linux.microsoft.com
2024-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. No conflicts and no adjacent changes. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-10-24Merge tag 'net-6.12-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfiler, xfrm and bluetooth. Oddly this includes a fix for a posix clock regression; in our previous PR we included a change there as a pre-requisite for networking one. That fix proved to be buggy and requires the follow-up included here. Thomas suggested we should send it, given we sent the buggy patch. Current release - regressions: - posix-clock: Fix unbalanced locking in pc_clock_settime() - netfilter: fix typo causing some targets not to load on IPv6 Current release - new code bugs: - xfrm: policy: remove last remnants of pernet inexact list Previous releases - regressions: - core: fix races in netdev_tx_sent_queue()/dev_watchdog() - bluetooth: fix UAF on sco_sock_timeout - eth: hv_netvsc: fix VF namespace also in synthetic NIC NETDEV_REGISTER event - eth: usbnet: fix name regression - eth: be2net: fix potential memory leak in be_xmit() - eth: plip: fix transmit path breakage Previous releases - always broken: - sched: deny mismatched skip_sw/skip_hw flags for actions created by classifiers - netfilter: bpf: must hold reference on net namespace - eth: virtio_net: fix integer overflow in stats - eth: bnxt_en: replace ptp_lock with irqsave variant - eth: octeon_ep: add SKB allocation failures handling in __octep_oq_process_rx() Misc: - MAINTAINERS: add Simon as an official reviewer" * tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits) net: dsa: mv88e6xxx: support 4000ps cycle counter period net: dsa: mv88e6xxx: read cycle counter period from hardware net: dsa: mv88e6xxx: group cycle counter coefficients net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x Bluetooth: ISO: Fix UAF on iso_sock_timeout Bluetooth: SCO: Fix UAF on sco_sock_timeout Bluetooth: hci_core: Disable works on hci_unregister_dev posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime() r8169: avoid unsolicited interrupts net: sched: use RCU read-side critical section in taprio_dump() net: sched: fix use-after-free in taprio_change() net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers net: usb: usbnet: fix name regression mlxsw: spectrum_router: fix xa_store() error checking virtio_net: fix integer overflow in stats net: fix races in netdev_tx_sent_queue()/dev_watchdog() net: wwan: fix global oob in wwan_rtnl_policy netfilter: xtables: fix typo causing some targets not to load on IPv6 ...
2024-10-23Bluetooth: ISO: Fix UAF on iso_sock_timeoutLuiz Augusto von Dentz
conn->sk maybe have been unlinked/freed while waiting for iso_conn_lock so this checks if the conn->sk is still valid by checking if it part of iso_sk_list. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-23Bluetooth: SCO: Fix UAF on sco_sock_timeoutLuiz Augusto von Dentz
conn->sk maybe have been unlinked/freed while waiting for sco_conn_lock so this checks if the conn->sk is still valid by checking if it part of sco_sk_list. Reported-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Tested-by: syzbot+4c0d0c4cde787116d465@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4c0d0c4cde787116d465 Fixes: ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-23Bluetooth: hci_core: Disable works on hci_unregister_devLuiz Augusto von Dentz
This make use of disable_work_* on hci_unregister_dev since the hci_dev is about to be freed new submissions are not disarable. Fixes: 0d151a103775 ("Bluetooth: hci_core: cancel all works upon hci_unregister_dev()") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-16Bluetooth: bnep: fix wild-memory-access in proto_unregisterYe Bin
There's issue as follows: KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f] CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W RIP: 0010:proto_unregister+0xee/0x400 Call Trace: <TASK> __do_sys_delete_module+0x318/0x580 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init() will cleanup all resource. Then when remove bnep module will call bnep_sock_cleanup() to cleanup sock's resource. To solve above issue just return bnep_sock_init()'s return value in bnep_exit(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-16Bluetooth: Remove debugfs directory on module init failureAaron Thompson
If bt_init() fails, the debugfs directory currently is not removed. If the module is loaded again after that, the debugfs directory is not set up properly due to the existing directory. # modprobe bluetooth # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:26 ./ drwx------ 31 root root 0 Sep 27 14:25 ../ -r--r--r-- 1 root root 0 Sep 27 14:26 l2cap -r--r--r-- 1 root root 0 Sep 27 14:26 sco # modprobe -r bluetooth # ls -laF /sys/kernel/debug/bluetooth ls: cannot access '/sys/kernel/debug/bluetooth': No such file or directory # # modprobe bluetooth modprobe: ERROR: could not insert 'bluetooth': Invalid argument # dmesg | tail -n 6 Bluetooth: Core ver 2.22 NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Faking l2cap_init() failure for testing NET: Unregistered PF_BLUETOOTH protocol family # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # # modprobe bluetooth # dmesg | tail -n 7 Bluetooth: Core ver 2.22 debugfs: Directory 'bluetooth' with parent '/' already present! NET: Registered PF_BLUETOOTH protocol family Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized # ls -laF /sys/kernel/debug/bluetooth total 0 drwxr-xr-x 2 root root 0 Sep 27 14:31 ./ drwx------ 31 root root 0 Sep 27 14:26 ../ # Cc: stable@vger.kernel.org Fixes: ffcecac6a738 ("Bluetooth: Create root debugfs directory during module init") Signed-off-by: Aaron Thompson <dev@aaront.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-16Bluetooth: Call iso_exit() on module unloadAaron Thompson
If iso_init() has been called, iso_exit() must be called on module unload. Without that, the struct proto that iso_init() registered with proto_register() becomes invalid, which could cause unpredictable problems later. In my case, with CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, loading the module again usually triggers this BUG(): list_add corruption. next->prev should be prev (ffffffffb5355fd0), but was 0000000000000068. (next=ffffffffc0a010d0). ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 4159 Comm: modprobe Not tainted 6.10.11-4+bt2-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x61/0xa0 ... __list_add_valid_or_report+0x61/0xa0 proto_register+0x299/0x320 hci_sock_init+0x16/0xc0 [bluetooth] bt_init+0x68/0xd0 [bluetooth] __pfx_bt_init+0x10/0x10 [bluetooth] do_one_initcall+0x80/0x2f0 do_init_module+0x8b/0x230 __do_sys_init_module+0x15f/0x190 do_syscall_64+0x68/0x110 ... Cc: stable@vger.kernel.org Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Aaron Thompson <dev@aaront.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-16Bluetooth: ISO: Fix multiple init when debugfs is disabledAaron Thompson
If bt_debugfs is not created successfully, which happens if either CONFIG_DEBUG_FS or CONFIG_DEBUG_FS_ALLOW_ALL is unset, then iso_init() returns early and does not set iso_inited to true. This means that a subsequent call to iso_init() will result in duplicate calls to proto_register(), bt_sock_register(), etc. With CONFIG_LIST_HARDENED and CONFIG_BUG_ON_DATA_CORRUPTION enabled, the duplicate call to proto_register() triggers this BUG(): list_add double add: new=ffffffffc0b280d0, prev=ffffffffbab56250, next=ffffffffc0b280d0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:35! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 2 PID: 887 Comm: bluetoothd Not tainted 6.10.11-1-ao-desktop #1 RIP: 0010:__list_add_valid_or_report+0x9a/0xa0 ... __list_add_valid_or_report+0x9a/0xa0 proto_register+0x2b5/0x340 iso_init+0x23/0x150 [bluetooth] set_iso_socket_func+0x68/0x1b0 [bluetooth] kmem_cache_free+0x308/0x330 hci_sock_sendmsg+0x990/0x9e0 [bluetooth] __sock_sendmsg+0x7b/0x80 sock_write_iter+0x9a/0x110 do_iter_readv_writev+0x11d/0x220 vfs_writev+0x180/0x3e0 do_writev+0xca/0x100 ... This change removes the early return. The check for iso_debugfs being NULL was unnecessary, it is always NULL when iso_inited is false. Cc: stable@vger.kernel.org Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Aaron Thompson <dev@aaront.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-15Bluetooth: RFCOMM: avoid leaving dangling sk pointer in rfcomm_sock_alloc()Ignat Korchagin
bt_sock_alloc() attaches allocated sk object to the provided sock object. If rfcomm_dlc_alloc() fails, we release the sk object, but leave the dangling pointer in the sock object, which may cause use-after-free. Fix this by swapping calls to bt_sock_alloc() and rfcomm_dlc_alloc(). Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-4-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-15Bluetooth: L2CAP: do not leave dangling sk pointer on error in ↵Ignat Korchagin
l2cap_sock_create() bt_sock_alloc() allocates the sk object and attaches it to the provided sock object. On error l2cap_sock_alloc() frees the sk object, but the dangling pointer is still attached to the sock object, which may create use-after-free in other code. Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241014153808.51894-3-ignat@cloudflare.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-10-04Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_syncLuiz Augusto von Dentz
This checks if the ACL connection remains valid as it could be destroyed while hci_enhanced_setup_sync is pending on cmd_sync leading to the following trace: BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60 Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37 CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? hci_enhanced_setup_sync+0x91b/0xa60 print_report+0x152/0x4c0 ? hci_enhanced_setup_sync+0x91b/0xa60 ? __virt_addr_valid+0x1fa/0x420 ? hci_enhanced_setup_sync+0x91b/0xa60 kasan_report+0xda/0x1b0 ? hci_enhanced_setup_sync+0x91b/0xa60 hci_enhanced_setup_sync+0x91b/0xa60 ? __pfx_hci_enhanced_setup_sync+0x10/0x10 ? __pfx___mutex_lock+0x10/0x10 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 ? assign_work+0x167/0x240 worker_thread+0x5b7/0xf60 ? __kthread_parkme+0xac/0x1c0 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x293/0x360 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 34: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __hci_conn_add+0x187/0x17d0 hci_connect_sco+0x2e1/0xb90 sco_sock_connect+0x2a2/0xb80 __sys_connect+0x227/0x2a0 __x64_sys_connect+0x6d/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 37: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x101/0x160 kfree+0xd0/0x250 device_release+0x9a/0x210 kobject_put+0x151/0x280 hci_conn_del+0x448/0xbf0 hci_abort_conn_sync+0x46f/0x980 hci_cmd_sync_work+0x1c2/0x330 process_one_work+0x7d9/0x1360 worker_thread+0x5b7/0xf60 kthread+0x293/0x360 ret_from_fork+0x2f/0x70 ret_from_fork_asm+0x1a/0x30 Cc: stable@vger.kernel.org Fixes: e07a06b4eb41 ("Bluetooth: Convert SCO configure_datapath to hci_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-04Bluetooth: RFCOMM: FIX possible deadlock in rfcomm_sk_state_changeLuiz Augusto von Dentz
rfcomm_sk_state_change attempts to use sock_lock so it must never be called with it locked but rfcomm_sock_ioctl always attempt to lock it causing the following trace: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Not tainted ------------------------------------------------------ syz-executor386/5093 is trying to acquire lock: ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1671 [inline] ffff88807c396258 (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+.}-{0:0}, at: rfcomm_sk_state_change+0x5b/0x310 net/bluetooth/rfcomm/sock.c:73 but task is already holding lock: ffff88807badfd28 (&d->lock){+.+.}-{3:3}, at: __rfcomm_dlc_close+0x226/0x6a0 net/bluetooth/rfcomm/core.c:491 Reported-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com Tested-by: syzbot+d7ce59b06b3eb14fd218@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d7ce59b06b3eb14fd218 Fixes: 3241ad820dbb ("[Bluetooth] Add timestamp support to L2CAP, RFCOMM and SCO") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-10-03Merge tag 'net-6.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from ieee802154, bluetooth and netfilter. Current release - regressions: - eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc - eth: am65-cpsw: fix forever loop in cleanup code Current release - new code bugs: - eth: mlx5: HWS, fixed double-free in error flow of creating SQ Previous releases - regressions: - core: avoid potential underflow in qdisc_pkt_len_init() with UFO - core: test for not too small csum_start in virtio_net_hdr_to_skb() - vrf: revert "vrf: remove unnecessary RCU-bh critical section" - bluetooth: - fix uaf in l2cap_connect - fix possible crash on mgmt_index_removed - dsa: improve shutdown sequence - eth: mlx5e: SHAMPO, fix overflow of hd_per_wq - eth: ip_gre: fix drops of small packets in ipgre_xmit Previous releases - always broken: - core: fix gso_features_check to check for both dev->gso_{ipv4_,}max_size - core: fix tcp fraglist segmentation after pull from frag_list - netfilter: nf_tables: prevent nf_skb_duplicated corruption - sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start - mac802154: fix potential RCU dereference issue in mac802154_scan_worker - eth: fec: restart PPS after link state change" * tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits) sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems doc: net: napi: Update documentation for napi_schedule_irqoff net/ncsi: Disable the ncsi work before freeing the associated structure net: phy: qt2025: Fix warning: unused import DeviceId gso: fix udp gso fraglist segmentation after pull from frag_list bridge: mcast: Fail MDB get request on empty entry vrf: revert "vrf: Remove unnecessary RCU-bh critical section" net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code net: phy: realtek: Check the index value in led_hw_control_get ppp: do not assume bh is held in ppp_channel_bridge_input() selftests: rds: move include.sh to TEST_FILES net: test for not too small csum_start in virtio_net_hdr_to_skb() net: gso: fix tcp fraglist segmentation after pull from frag_list ipv4: ip_gre: Fix drops of small packets in ipgre_xmit net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check net: add more sanity checks to qdisc_pkt_len_init() net: avoid potential underflow in qdisc_pkt_len_init() with UFO net: ethernet: ti: cpsw_ale: Fix warning on some platforms net: microchip: Make FDMA config symbol invisible ...
2024-10-02move asm/unaligned.h to linux/unaligned.hAl Viro
asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
2024-09-27Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LELuiz Augusto von Dentz
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd97fd4 ("Bluetooth: Always request for user confirmation for Just Works") always request user confirmation with confirm_hint set since the likes of bluetoothd have dedicated policy around JUST_WORKS method (e.g. main.conf:JustWorksRepairing). CVE: CVE-2024-8805 Cc: stable@vger.kernel.org Fixes: ba15a58b179e ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Kiran K <kiran.k@intel.com>
2024-09-27Bluetooth: L2CAP: Fix uaf in l2cap_connectLuiz Augusto von Dentz
[Syzbot reported] BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54 CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci2 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline] l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline] hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 ... Freed by task 5245: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x12a/0x3b0 mm/slub.c:4598 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline] kref_put include/linux/kref.h:65 [inline] l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline] l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline] hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231 process_scheduled_works kernel/workqueue.c:3312 [inline] worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389 kthread+0x2c1/0x3a0 kernel/kthread.c:389 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Reported-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Tested-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c12e2f941af1feb5632c Fixes: 7b064edae38d ("Bluetooth: Fix authentication if acl data comes before remote feature evt") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-27Bluetooth: MGMT: Fix possible crash on mgmt_index_removedLuiz Augusto von Dentz
If mgmt_index_removed is called while there are commands queued on cmd_sync it could lead to crashes like the bellow trace: 0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc 0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth] 0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth] 0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth] So while handling mgmt_index_removed this attempts to dequeue commands passed as user_data to cmd_sync. Fixes: 7cf5c2978f23 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Reported-by: jiaymao <quic_jiaymao@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCELLuiz Augusto von Dentz
This ignores errors from HCI_OP_REMOTE_NAME_REQ_CANCEL since it shouldn't interfere with the stopping of discovery and in certain conditions it seems to be failing. Link: https://github.com/bluez/bluez/issues/575 Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: CMTP: Mark BT_CMTP as DEPRECATEDLuiz Augusto von Dentz
This marks BT_CMTP as DEPRECATED in preparation to get it removed. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: replace deprecated strncpy with strscpy_padJustin Stitt
strncpy() is deprecated for use on NUL-terminated destination strings [0] and as such we should prefer more robust and less ambiguous string interfaces. The CAPI (part II) [1] states that the manufacturer id should be a "zero-terminated ASCII string" and should "always [be] zero-terminated." Much the same for the serial number: "The serial number, a seven-digit number coded as a zero-terminated ASCII string". Along with this, its clear the original author intended for these buffers to be NUL-padded as well. To meet the specification as well as properly NUL-pad, use strscpy_pad(). In doing this, an opportunity to simplify this code is also present. Remove the min_t() and combine the length check into the main if. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [0] Link: https://capi.org/downloads.html [1] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILEDLuiz Augusto von Dentz
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be HCI_CONN_MGMT_DISCONNECTED. Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: Use led_set_brightness() in LED trigger activate() callbackHans de Goede
A LED trigger's activate() callback gets called when the LED trigger gets activated for a specific LED, so that the trigger code can ensure the LED state matches the current state of the trigger condition (LED_FULL when HCI_UP is set in this case). led_trigger_event() is intended for trigger condition state changes and iterates over _all_ LEDs which are controlled by this trigger changing the brightness of each of them. In the activate() case only the brightness of the LED which is being activated needs to change and that LED is passed as an argument to activate(), switch to led_set_brightness() to only change the brightness of the LED being activated. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_conn: Remove redundant memset after kzallocKuan-Wei Chiu
Since kzalloc already zeroes the allocated memory, the subsequent memset call is unnecessary. This patch removes the redundant memset to clean up the code and enhance efficiency. Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-30Bluetooth: MGMT: Ignore keys being loaded with invalid typeLuiz Augusto von Dentz
Due to 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 there could be keys stored with the wrong address type so this attempt to detect it and ignore them instead of just failing to load all keys. Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-30Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE"Luiz Augusto von Dentz
This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which breaks compatibility with commands like: bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0] Keys: 2 BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd) Key type: Authenticated key from P-256 (0x03) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 6ed96089bd9765be2f2c971b0b95f624 LE Address: D7:2A:DE:1E:73:A2 (Static) Key type: Unauthenticated key from P-256 (0x02) Central: 0x00 Encryption size: 16 Diversifier[2]: 0000 Randomizer[8]: 0000000000000000 Key[16]: 87dd2546ededda380ffcdc0a8faa4597 @ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0] Load Long Term Keys (0x0013) Status: Invalid Parameters (0x0d) Cc: stable@vger.kernel.org Link: https://github.com/bluez/bluez/issues/875 Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-30Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECTLuiz Augusto von Dentz
MGMT_OP_DISCONNECT can be called while mgmt_device_connected has not been called yet, which will cause the connection procedure to be aborted, so mgmt_device_disconnected shall still respond with command complete to MGMT_OP_DISCONNECT and just not emit MGMT_EV_DEVICE_DISCONNECTED since MGMT_EV_DEVICE_CONNECTED was never sent. To fix this MGMT_OP_DISCONNECT is changed to work similarly to other command which do use hci_cmd_sync_queue and then use hci_conn_abort to disconnect and returns the result, in order for hci_conn_abort to be used from hci_cmd_sync context it now uses hci_cmd_sync_run_once. Link: https://github.com/bluez/bluez/issues/932 Fixes: 12d4a3b2ccb3 ("Bluetooth: Move check for MGMT_CONNECTED flag into mgmt.c") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-30Bluetooth: hci_sync: Introduce hci_cmd_sync_run/hci_cmd_sync_run_onceLuiz Augusto von Dentz
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when already on hdev->cmd_sync_work context. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-08-23Bluetooth: hci_core: Fix not handling hibernation actionsLuiz Augusto von Dentz
This fixes not handling hibernation actions on suspend notifier so they are treated in the same way as regular suspend actions. Fixes: 9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit (git 2.34.1) at 2025-07-15 21:29:14 +0000