summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_LEBrian Gix
Uses: hci_disable_advertising_sync hci_remove_ext_adv_instance_sync hci_write_le_host_supported_sync hci_setup_ext_adv_instance_sync hci_update_scan_rsp_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CLOCK_INFOBrian Gix
Synchronous version of MGMT_OP_GET_CLOCK_INFO. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_SECURE_CONNBrian Gix
Synchronous version of MGMT_OP_SET_SECURE_CONN. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_GET_CONN_INFOBrian Gix
Synchronous version of MGMT_OP_GET_CONN_INFO Implements: hci_read_rssi_sync hci_read_tx_power_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable synch'd set_bredrBrian Gix
Uses previously written: hci_write_fast_connectable_sync hci_update_scan_sync hci_update_adv_data_sync Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_SET_FAST_CONNECTABLEBrian Gix
This creates a synchronized Write Fast Connectable call and attaches it to the MGMT_OP_SET_FAST_CONNECTABLE management opcode. Signed-off-by: Brian Gix <brian.gix@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERYLuiz Augusto von Dentz
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY, MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use hci_cmd_sync_queue so they no longer depend on hdev->discov_update work to send any commands. Tested with: tools/mgmt-tester -s "Start Discovery" Test Summary ------------ Start Discovery - Not powered 1 Passed Start Discovery - Invalid parameters 1 Passed Start Discovery - Not supported 1 Passed Start Discovery - Success 1 Passed Start Discovery - Success 2 Passed Start Discovery - Power Off 1 Passed Start Discovery BREDR LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Enable) Passed Start Discovery LE - (Ext Scan Param) Passed Start Discovery - (2m, Scan Param) Passed Start Discovery - (coded, Scan Param) Passed Start Discovery - (1m, 2m, coded, Scan Param) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Start Service" Test Summary ------------ Start Service Discovery - Not powered 1 Passed Start Service Discovery - Invalid parameters 1 Passed Start Service Discovery - Not supported 1 Passed Start Service Discovery - Success 1 Passed Start Service Discovery - Success 2 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 tools/mgmt-tester -s "Stop Discovery" Test Summary ------------ Stop Discovery - Success 1 Passed Stop Discovery - BR/EDR (Inquiry) Success 1 Passed Stop Discovery - Rejected 1 Passed Stop Discovery - Invalid parameters 1 Passed Stop Discovery - (Ext Scan Disable) Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Convert MGMT_SET_POWEREDLuiz Augusto von Dentz
This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all commands are run within hdev->cmd_sync_work instead of hdev->power_on_work and hdev->power_off_work. In addition to that the power on sequence now takes into account if local IRK needs to be programmed in the resolving list. Tested with: tools/mgmt-tester -s "Set powered" Test Summary ------------ Set powered on - Success Passed Set powered on - Invalid parameters 1 Passed Set powered on - Invalid parameters 2 Passed Set powered on - Invalid parameters 3 Passed Set powered on - Invalid index Passed Set powered on - Privacy and Advertising Passed Set powered off - Success Passed Set powered off - Class of Device Passed Set powered off - Invalid parameters 1 Passed Set powered off - Invalid parameters 2 Passed Set powered off - Invalid parameters 3 Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Rework background scanLuiz Augusto von Dentz
This replaces the use of hci_update_background_scan with hci_update_passive_scan which runs from cmd_work_sync and deal properly with resolving list when LL privacy is enabled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Enable advertising when LL privacy is enabledLuiz Augusto von Dentz
This enables advertising when LL privacy is enabled and changes the command sequence when resolving list is updated to also account for when advertising is enabled using the following sequence: If there are devices to scan: Disable Scanning -> Update Accept List -> use_ll_privacy((Disable Advertising) -> Disable Resolving List -> Update Resolving List -> Enable Resolving List -> (Enable Advertising)) -> Enable Scanning Otherwise: Disable Scanning Errors during the Update Accept List stage are handled gracefully by restoring any previous state (e.g. advertising) and disabling the use of accept list as either accept list or resolving list could not be updated. Tested with: mgmt-tester -s "LL Privacy" Test Summary ------------ LL Privacy - Add Device 1 (Add to WL) Passed LL Privacy - Add Device 2 (Add to RL) Passed LL Privacy - Add Device 3 (Enable RL) Passed LL Privacy - Add Device 4 (2 Devices to WL) Passed LL Privacy - Add Device 5 (2 Devices to RL) Passed LL Privacy - Add Device 6 (RL is full) Passed LL Privacy - Add Device 7 (WL is full) Passed LL Privacy - Add Device 8 (Disable Adv) Passed LL Privacy - Add Device 9 (Multi Adv) Passed LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed LL Privacy - Remove Device 1 (Remove from WL) Passed LL Privacy - Remove Device 2 (Remove from RL) Passed LL Privacy - Remove Device 3 (Disable RL) Passed LL Privacy - Remove Device 4 (Disable Adv) Passed LL Privacy - Remove Device 5 (Multi Adv) Passed LL Privacy - Start Discovery 1 (Disable RL) Passed LL Privacy - Start Discovery 2 (Disable RL) Passed Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 3Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Device Remove Device Tested with: mgmt-tester -s "Add Device" Test Summary ------------ Add Device - Invalid Params 1 Passed Add Device - Invalid Params 2 Passed Add Device - Invalid Params 3 Passed Add Device - Invalid Params 4 Passed Add Device - Success 1 Passed Add Device - Success 2 Passed Add Device - Success 3 Passed Add Device - Success 4 Passed Add Device - Success 5 Passed Add Device - Success 6 - Add to whitelist Passed Add Device - Success 7 - Add to resolv list Passed Add Device - Success 8 - Enable resolv list Passed Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.209 seconds mgmt-tester -s "Remove Device" Test Summary ------------ Remove Device - Invalid Params 1 Passed Remove Device - Invalid Params 2 Passed Remove Device - Invalid Params 3 Passed Remove Device - Success 1 Passed Remove Device - Success 2 Passed Remove Device - Success 3 Passed Remove Device - Success 4 Passed Remove Device - Success 5 Passed Remove Device - Success 6 - All Devices Passed Remove Device - Success 7 - Remove from whitelist Passed Remove Device - Success 8 - Remove from resolv list Passed Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 4.26 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Add Advertising Remove Advertising Add Extended Advertising Parameters Add Extended Advertising Data mgmt-tester -s "Add Advertising" Test Summary ------------ Add Advertising - Failure: LE off Passed Add Advertising - Invalid Params 1 (AD too long) Passed Add Advertising - Invalid Params 2 (Malformed len) Passed Add Advertising - Invalid Params 3 (Malformed len) Passed Add Advertising - Invalid Params 4 (Malformed len) Passed Add Advertising - Invalid Params 5 (AD too long) Passed Add Advertising - Invalid Params 6 (ScRsp too long) Passed Add Advertising - Invalid Params 7 (Malformed len) Passed Add Advertising - Invalid Params 8 (Malformed len) Passed Add Advertising - Invalid Params 9 (Malformed len) Passed Add Advertising - Invalid Params 10 (ScRsp too long) Passed Add Advertising - Rejected (Timeout, !Powered) Passed Add Advertising - Success 1 (Powered, Add Adv Inst) Passed Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed Add Advertising - Success 3 (!Powered, Adv Enable) Passed Add Advertising - Success 4 (Set Adv on override) Passed Add Advertising - Success 5 (Set Adv off override) Passed Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed Add Advertising - Success 8 (Connectable Flag) Passed Add Advertising - Success 9 (General Discov Flag) Passed Add Advertising - Success 10 (Limited Discov Flag) Passed Add Advertising - Success 11 (Managed Flags) Passed Add Advertising - Success 12 (TX Power Flag) Passed Add Advertising - Success 13 (ADV_SCAN_IND) Passed Add Advertising - Success 14 (ADV_NONCONN_IND) Passed Add Advertising - Success 15 (ADV_IND) Passed Add Advertising - Success 16 (Connectable -> on) Passed Add Advertising - Success 17 (Connectable -> off) Passed Add Advertising - Success 18 (Power -> off, Remove) Passed Add Advertising - Success 19 (Power -> off, Keep) Passed Add Advertising - Success 20 (Add Adv override) Passed Add Advertising - Success 21 (Timeout expires) Passed Add Advertising - Success 22 (LE -> off, Remove) Passed Add Advertising - Success (Empty ScRsp) Passed Add Advertising - Success (ScRsp only) Passed Add Advertising - Invalid Params (ScRsp too long) Passed Add Advertising - Success (ScRsp appear) Passed Add Advertising - Invalid Params (ScRsp appear long) Passed Add Advertising - Success (Appear is null) Passed Add Advertising - Success (Name is null) Passed Add Advertising - Success (Complete name) Passed Add Advertising - Success (Shortened name) Passed Add Advertising - Success (Short name) Passed Add Advertising - Success (Name + data) Passed Add Advertising - Invalid Params (Name + data) Passed Add Advertising - Success (Name+data+appear) Passed Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 2.17 seconds mgmt-tester -s "Remove Advertising" Test Summary ------------ Remove Advertising - Invalid Params 1 Passed Remove Advertising - Success 1 Passed Remove Advertising - Success 2 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0585 seconds mgmt-tester -s "Ext Adv MGMT Params" Test Summary: ------------ Ext Adv MGMT Params - Unpowered Passed Ext Adv MGMT Params - Invalid parameters Passed Ext Adv MGMT Params - Success Passed Ext Adv MGMT Params - (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0746 seconds mgmt-tester -s "Ext Adv MGMT -" Test Summary ------------ Ext Adv MGMT - Data set without Params Passed Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed Ext Adv MGMT - AD Data (5.0) Success Passed Ext Adv MGMT - AD Scan Response (5.0) Success Passed Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0805 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 1Luiz Augusto von Dentz
This make use of hci_cmd_sync_queue for the following MGMT commands: Set Device Class Set Device ID Add UUID Remove UUID tools/mgmt-tester -s "Set Device Class" Test Summary ------------ Set Device Class - Success 1 Passed Set Device Class - Success 2 Passed Set Device Class - Invalid parameters 1 Passed Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0599 seconds tools/mgmt-tester -s "Set Device ID" Test Summary ------------ Set Device ID - Success 1 Passed Set Device ID - Success 2 Passed Set Device ID - Disable Passed Set Device ID - Power off and Power on Passed Set Device ID - SSP off and Power on Passed Set Device ID - Invalid Parameter Passed Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.107 seconds tools/mgmt-tester -s "Add UUID" Test Summary ------------ Add UUID - UUID-16 1 Passed Add UUID - UUID-16 multiple 1 Passed Add UUID - UUID-16 partial 1 Passed Add UUID - UUID-32 1 Passed Add UUID - UUID-32 multiple 1 Passed Add UUID - UUID-32 partial 1 Passed Add UUID - UUID-128 1 Passed Add UUID - UUID-128 multiple 1 Passed Add UUID - UUID-128 partial 1 Passed Add UUID - UUID mix Passed Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.198 seconds tools/mgmt-tester -s "Remove UUID" Test Summary ------------ Remove UUID - Success 1 Passed Remove UUID - All UUID - Success 2 Passed Remove UUID - Power Off - Success 3 Passed Remove UUID - Power Off and On - Success 4 Passed Remove UUID - Not Exist - Invalid Params 1 Passed Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0 Overall execution time: 0.0908 seconds Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-29Bluetooth: Add helper for serialized HCI command executionMarcel Holtmann
The usage of __hci_cmd_sync() within the hdev->setup() callback allows for a nice and simple serialized execution of HCI commands. More importantly it allows for result processing before issueing the next command. With the current usage of hci_req_run() it is possible to batch up commands and execute them, but it is impossible to react to their results or errors. This is an attempt to generalize the hdev->setup() handling and provide a simple way of running multiple HCI commands from a single function context. There are multiple struct work that are decdicated to certain tasks already used right now. It is add a lot of bloat to hci_dev struct and extra handling code. So it might be possible to put all of these behind a common HCI command infrastructure and just execute the HCI commands from the same work context in a serialized fashion. For example updating the white list and resolving list can be done now without having to know the list size ahead of time. Also preparing for suspend or resume shouldn't require a state machine anymore. There are other tasks that should be simplified as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-28Bluetooth: Fix removing adv when processing cmd completeArchie Pusaka
If we remove one instance of adv using Set Extended Adv Enable, there is a possibility of issue occurs when processing the Command Complete event. Especially, the adv_info might not be found since we already remove it in hci_req_clear_adv_instance() -> hci_remove_adv_instance(). If that's the case, we will mistakenly proceed to remove all adv instances instead of just one single instance. This patch fixes the issue by checking the content of the HCI command instead of checking whether the adv_info is found. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-10-25bluetooth: use dev_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25bluetooth: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Convert bluetooth from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25Bluetooth: cmtp: fix possible panic when cmtp_init_sockets() failsWang Hai
I got a kernel BUG report when doing fault injection test: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:45! ... RIP: 0010:__list_del_entry_valid.cold+0x12/0x4d ... Call Trace: proto_unregister+0x83/0x220 cmtp_cleanup_sockets+0x37/0x40 [cmtp] cmtp_exit+0xe/0x1f [cmtp] do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae If cmtp_init_sockets() in cmtp_init() fails, cmtp_init() still returns success. This will cause a kernel bug when accessing uncreated ctmp related data when the module exits. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-13Bluetooth: Fix memory leak of hci deviceWei Yongjun
Fault injection test reported memory leak of hci device as follows: unreferenced object 0xffff88800b858000 (size 8192): comm "kworker/0:2", pid 167, jiffies 4294955747 (age 557.148s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. backtrace: [<0000000070eb1059>] kmem_cache_alloc_trace mm/slub.c:3208 [<00000000015eb521>] hci_alloc_dev_priv include/linux/slab.h:591 [<00000000dcfc1e21>] bpa10x_probe include/net/bluetooth/hci_core.h:1240 [<000000005d3028c7>] usb_probe_interface drivers/usb/core/driver.c:397 [<00000000cbac9243>] really_probe drivers/base/dd.c:517 [<0000000024cab3f0>] __driver_probe_device drivers/base/dd.c:751 [<00000000202135cb>] driver_probe_device drivers/base/dd.c:782 [<000000000761f2bc>] __device_attach_driver drivers/base/dd.c:899 [<00000000f7d63134>] bus_for_each_drv drivers/base/bus.c:427 [<00000000c9551f0b>] __device_attach drivers/base/dd.c:971 [<000000007f79bd16>] bus_probe_device drivers/base/bus.c:487 [<000000007bb8b95a>] device_add drivers/base/core.c:3364 [<000000009564d9ea>] usb_set_configuration drivers/usb/core/message.c:2171 [<00000000e4657087>] usb_generic_driver_probe drivers/usb/core/generic.c:239 [<0000000071ede518>] usb_probe_device drivers/usb/core/driver.c:294 [<00000000cbac9243>] really_probe drivers/base/dd.c:517 hci_alloc_dev() do not init the device's flag. And hci_free_dev() using put_device() to free the memory allocated for this device, but it calls just put_device(dev) only in case of HCI_UNREGISTER flag is set, So any error handing before hci_register_dev() success will cause memory leak. To avoid this behaviour we can using kfree() to release dev before hci_register_dev() success. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-13Bluetooth: Fix debugfs entry leak in hci_register_dev()Wei Yongjun
Fault injection test report debugfs entry leak as follows: debugfs: Directory 'hci0' with parent 'bluetooth' already present! When register_pm_notifier() failed in hci_register_dev(), the debugfs create by debugfs_create_dir() do not removed in the error handing path. Add the remove debugfs code to fix it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-12Bluetooth: L2CAP: Fix not initializing sk_peer_pidLuiz Augusto von Dentz
In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL the pid is used but sk_peer_pid was not being initialized as it is currently only done for af_unix. Fixes: b48596d1dc25 ("Bluetooth: L2CAP: Add get_peer_pid callback") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-12Bluetooth: hci_sock: purge socket queues in the destruct() callbackNguyen Dinh Phi
The receive path may take the socket right before hci_sock_release(), but it may enqueue the packets to the socket queues after the call to skb_queue_purge(), therefore the socket can be destroyed without clear its queues completely. Moving these skb_queue_purge() to the hci_sock_destruct() will fix this issue, because nothing is referencing the socket at this point. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+4c4ffd1e1094dae61035@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-07Bluetooth: mgmt: Fix Experimental Feature Changed eventTedd Ho-Jeong An
This patch fixes the controller index in the Experimental Features Changed event for the offload_codec and the quality_report features to use the actual hdev index instead of non-controller index(0xffff) so the client can receive the event and know which controller the event is for. Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag") Fixes: ae7d925b5c043 ("Bluetooth: Support the quality report events") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-07Bluetooth: Read codec capabilities only if supportedKiran K
Read codec capabilities only if HCI_READ_LOCAL_CODEC_CAPABILITIES command is supported. If capablities are not supported, then cache codec data without caps. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-06Bluetooth: Fix handling of SUSPEND_DISCONNECTINGLuiz Augusto von Dentz
When SUSPEND_DISCONNECTING bit is set that means Disconnect is pending but the code was evaluating if the list is empty before calling hci_conn_del which does the actual cleanup and remove the connection from the list thus the bit is never cleared causing the suspend procedure to always timeout when there are connections to be disconnected: Suspend/Resume - Success 5 (Pairing - Legacy) - waiting done Set the system into Suspend via force_suspend = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.200458 = mgmt-tester: Set the system into Suspend via force_suspend 17:03:13.205812 < HCI Command: Write Scan E.. (0x03|0x001a) plen 1 #122 [hci0] 17:03:13.213561 Scan enable: No Scans (0x00) > HCI Event: Command Complete (0x0e) plen 4 #123 [hci0] 17:03:13.214710 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 #124 [hci0] 17:03:13.215830 Handle: 42 Reason: Remote Device Terminated due to Power Off (0x15) > HCI Event: Command Status (0x0f) plen 4 #125 [hci0] 17:03:13.216602 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 #126 [hci0] 17:03:13.217342 Status: Success (0x00) Handle: 42 Reason: Remote Device Terminated due to Power Off (0x15) @ MGMT Event: Device Disconn.. (0x000c) plen 8 {0x0002} [hci0] 17:03:13.217688 BR/EDR Address: 00:AA:01:01:00:00 (Intel Corporation) Reason: Connection terminated by local host for suspend (0x05) @ MGMT Event: Device Disconn.. (0x000c) plen 8 {0x0001} [hci0] 17:03:13.217688 BR/EDR Address: 00:AA:01:01:00:00 (Intel Corporation) Reason: Connection terminated by local host for suspend (0x05) Suspend/Resume - Success 5 (Pairing - Legacy) - test timed out = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.939317 Suspend/Resume - Success 5 (Pairing - Legacy) - teardown = mgmt-tester: Suspend/Resume - Success 5 (Pairing -.. 17:03:13.947267 [ 13.284291] Bluetooth: hci0: Timed out waiting for suspend events [ 13.287324] Bluetooth: hci0: Suspend timeout bit: 6 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-05Merge tag 'for-net-next-2021-10-01' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for MediaTek MT7922 and MT7921 - Enable support for AOSP extention in Qualcomm WCN399x and Realtek 8822C/8852A. - Add initial support for link quality and audio/codec offload. - Rework of sockets sendmsg to avoid locking issues. - Add vhci suspend/resume emulation. ==================== Link: https://lore.kernel.org/r/20211001230850.3635543-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-01Bluetooth: Rename driver .prevent_wake to .wakeupLuiz Augusto von Dentz
prevent_wake logic is backward since what it is really checking is if the device may wakeup the system or not, not that it will prevent the to be awaken. Also looking on how other subsystems have the entry as power/wakeup this also renames the force_prevent_wake to force_wakeup in vhci driver. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-01Bluetooth: hci_sock: Replace use of memcpy_from_msg with bt_skb_sendmsgLuiz Augusto von Dentz
This makes use of bt_skb_sendmsg instead of allocating a different buffer to be used with memcpy_from_msg which cause one extra copy. Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-29Bluetooth: Make use of hci_{suspend,resume}_dev on suspend notifierLuiz Augusto von Dentz
This moves code from hci_suspend_notifier to hci_{suspend,resume}_dev since some driver may handle pm directly using HCI_QUIRK_NO_SUSPEND_NOTIFIER they would instead call hci_{suspend,resume}_dev directly and we want that to have the same behavior regardless of where pm is being handled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-28Bluetooth: Fix handling of experimental feature for codec offloadMarcel Holtmann
The existence of the experimental feature identifiy is the indication that it is supported or not. No extra flag needed and the initial flag should define if a feature is enabled or not. This is actually defined in the management API definition. Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: Fix handling of experimental feature for quality reportsMarcel Holtmann
The existence of the experimental feature identifiy is the indication that it is supported or not. No extra flag needed and the initial flag should define if a feature is enabled or not. This is actually defined in the management API definition. Fixes: ae7d925b5c043 ("Bluetooth: Support the quality report events") Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-28Bluetooth: Fix wrong opcode when LL privacy enabledYun-Hao Chung
The returned opcode of command status of remove_adv is wrong when LL privacy is enabled. Signed-off-by: Yun-Hao Chung <howardchung@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-28Bluetooth: Fix Advertisement Monitor Suspend/ResumeManish Mandlik
During system suspend, advertisement monitoring is disabled by setting the HCI_VS_MSFT_LE_Set_Advertisement_Filter_Enable to False. This disables the monitoring during suspend, however, if the controller is monitoring a device, it sends HCI_VS_MSFT_LE_Monitor_Device_Event to indicate that the monitoring has been stopped for that particular device. This event may occur after suspend depending on the low_threshold_timeout and peer device advertisement frequency, which causes early wake up. Right way to disable the monitoring for suspend is by removing all the monitors before suspend and re-monitor after resume to ensure no events are received during suspend. This patch fixes this suspend/resume issue. Following tests are performed: - Add monitors before suspend and make sure DeviceFound gets triggered - Suspend the system and verify that all monitors are removed by kernel but not Released by bluetoothd - Wake up and verify that all monitors are added again and DeviceFound gets triggered Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Archie Pusaka <apusaka@google.com> Reviewed-by: Miao-chen Chou <mcchou@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-22Bluetooth: hci_core: Move all debugfs handling to hci_debugfs.cLuiz Augusto von Dentz
This moves hci_debugfs_create_basic to hci_debugfs.c which is where all the others debugfs entries are handled. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21Bluetooth: SCO: Fix sco_send_frame returning skb->lenLuiz Augusto von Dentz
The skb in modified by hci_send_sco which pushes SCO headers thus changing skb->len causing sco_sock_sendmsg to fail. Fixes: 0771cbb3b97d ("Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsg") Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21Bluetooth: Fix passing NULL to PTR_ERRLuiz Augusto von Dentz
Passing NULL to PTR_ERR will result in 0 (success), also since the likes of bt_skb_sendmsg does never return NULL it is safe to replace the instances of IS_ERR_OR_NULL with IS_ERR when checking its return. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21Bluetooth: hci_sock: Add support for BT_{SND,RCV}BUFLuiz Augusto von Dentz
This adds support for BT_{SND,RCV}BUF so userspace can set MTU based on the channel usage. Fixes: https://github.com/bluez/bluez/issues/201 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-21Bluetooth: eir: Move EIR/Adv Data functions to its own fileLuiz Augusto von Dentz
This moves functions manipulating EIR/Adv Data to its own file so it can be reused by other files. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-13Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsgLuiz Augusto von Dentz
This makes use of bt_skb_sendmmsg instead using memcpy_from_msg which is not considered safe to be used when lock_sock is held. Also make rfcomm_dlc_send handle skb with fragments and queue them all atomically. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-13Bluetooth: SCO: Replace use of memcpy_from_msg with bt_skb_sendmsgLuiz Augusto von Dentz
This makes use of bt_skb_sendmsg instead of allocating a different buffer to be used with memcpy_from_msg which cause one extra copy. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-10Bluetooth: Keep MSFT ext info throughout a hci_dev's life cycleMiao-chen Chou
This splits the msft_do_{open/close} to msft_do_{open/close} and msft_{register/unregister}. With this change it is possible to retain the MSFT extension info irrespective of controller power on/off state. This helps bluetoothd to report correct 'supported features' of the controller to the D-Bus clients event if the controller is off. It also re-reads the MSFT info upon every msft_do_open(). The following test steps were performed. 1. Boot the test device and verify the MSFT support debug log in syslog. 2. Power off the controller and read the 'supported features', power on and read again. 3. Restart the bluetoothd and verify the 'supported features' value. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-07Bluetooth: Allow usb to auto-suspend when SCO use non-HCI transportChethan T N
Currently usb tranport is not allowed to suspend when SCO over HCI tranport is active. This patch shall enable the usb tranport to suspend when SCO link use non-HCI transport. Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add offload feature under experimental flagKiran K
Allow user level process to enable / disable codec offload feature through mgmt interface. By default offload codec feature is disabled. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for msbc coding formatKiran K
In Enhanced_Setup_Synchronous_Command, add support for msbc coding format Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Configure codec for HFP offload use caseKiran K
For HFP offload use case, codec needs to be configured before opening SCO connection. This patch sends HCI_CONFIGURE_DATA_PATH command to configure doec before opening SCO connection. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for HCI_Enhanced_Setup_Synchronous_Connection commandKiran K
< HCI Command: Enhanced Setup Synchronous Connection (0x01|0x003d) plen 59 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used Retransmission effort: Optimize for link quality (0x02) > HCI Event: Command Status (0x0f) plen 4 Enhanced Setup Synchronous Connection (0x01|0x003d) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: CC:98:8B:92:04:FD (SONY Visual Products Inc.) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x06 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Allow setting of codec for HFP offload use caseKiran K
This patch allows user space to set the codec that needs to be used for HFP offload use case. The codec details are cached and the controller is configured before opening the SCO connection. Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Allow querying of supported offload codecs over SCO socketKiran K
Add BT_CODEC option for getsockopt systemcall to get the details of offload codecs supported over SCO socket Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Add support for Read Local Supported Codecs V2Kiran K
Use V2 version of read local supported command is controller supports snoop: > HCI Event: Command Complete (0x0e) plen 20 Read Local Supported Codecs V2 (0x04|0x000d) ncmd 1 Status: Success (0x00) Number of supported codecs: 7 Codec: u-law log (0x00) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: A-law log (0x01) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: CVSD (0x02) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Transparent (0x03) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Linear PCM (0x04) Logical Transport Type: 0x02 Codec supported over BR/EDR SCO and eSCO Codec: Reserved (0x08) Logical Transport Type: 0x03 Codec supported over BR/EDR ACL Codec supported over BR/EDR SCO and eSCO Codec: mSBC (0x05) Logical Transport Type: 0x03 Codec supported over BR/EDR ACL Codec supported over BR/EDR SCO and eSCO Number of vendor codecs: 0 ...... < HCI Command: Read Local Suppor.. (0x04|0x000e) plen 7 Codec: mSBC (0x05) Logical Transport Type: 0x00 Direction: Input (Host to Controller) (0x00) > HCI Event: Command Complete (0x0e) plen 12 Read Local Supported Codec Capabilities (0x04|0x000e) ncmd 1 Status: Success (0x00) Number of codec capabilities: 1 Capabilities #0: 00 00 11 15 02 33 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-09-07Bluetooth: Enumerate local supported codec and cache detailsKiran K
Move reading of supported local codecs into a separate init function, query codecs capabilities and cache the data Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit (git 2.34.1) at 2025-07-19 17:28:25 +0000