summaryrefslogtreecommitdiff
path: root/net/wireless/scan.c
AgeCommit message (Collapse)Author
2023-12-12wifi: cfg80211: generate an ML element for per-STA profilesBenjamin Berg
The specification says that this information should not be explicitly included in the per-STA profile. However, we need this information readily available in the BSS for userspace and also internally when associating. As such, append the appropriate element before adding/updating the BSS. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231211085121.abde63d9cc6d.I3d346be0f84f51dccf4f4f92a3e997e6102b9456@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: cfg80211: add BSS usage reportingJohannes Berg
Sometimes there may be reasons for which a BSS that's actually found in scan cannot be used to connect to, for example a nonprimary link of an NSTR mobile AP MLD cannot be used for normal direct connections to it. Not indicating these to userspace as we do now of course avoids being able to connect to them, but it's better if they're shown to userspace and it can make an appropriate decision, without e.g. doing an additional ML probe. Thus add an indication of what a BSS can be used for, currently "normal" and "MLD link", including a reason bitmap for it being not usable. The latter can be extended later for certain BSSes if there are other reasons they cannot be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231211085121.0464f25e0b1d.I9f70ca9f1440565ad9a5207d0f4d00a20cca67e7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-26Merge tag 'wireless-next-2023-10-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The third, and most likely the last, features pull request for v6.7. Fixes all over and only few small new features. Major changes: iwlwifi - more Multi-Link Operation (MLO) work ath12k - QCN9274: mesh support ath11k - firmware-2.bin container file format support * tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits) wifi: ray_cs: Remove unnecessary (void*) conversions Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition" wifi: ath12k: Introduce and use ath12k_sta_to_arsta() wifi: ath12k: fix htt mlo-offset event locking wifi: ath12k: fix dfs-radar and temperature event locking wifi: ath11k: fix gtk offload status event locking wifi: ath11k: fix htt pktlog locking wifi: ath11k: fix dfs radar event locking wifi: ath11k: fix temperature event locking wifi: ath12k: rename the sc naming convention to ab wifi: ath12k: rename the wmi_sc naming convention to wmi_ab wifi: ath11k: add firmware-2.bin support wifi: ath11k: qmi: refactor ath11k_qmi_m3_load() wifi: rtw89: cleanup firmware elements parsing wifi: rt2x00: rework MT7620 PA/LNA RF calibration wifi: rt2x00: rework MT7620 channel config function wifi: rt2x00: improve MT7620 register initialization MAINTAINERS: wifi: rt2x00: drop Helmut Schaa wifi: wlcore: main: replace deprecated strncpy with strscpy wifi: wlcore: boot: replace deprecated strncpy with strscpy ... ==================== Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d6ada ("vsock/virtio: support to send non-linear skb") 53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23wifi: cfg80211: pass correct pointer to rdev_inform_bss()Ben Greear
Confusing struct member names here resulted in passing the wrong pointer, causing crashes. Pass the correct one. Fixes: eb142608e2c4 ("wifi: cfg80211: use a struct for inform_single_bss data") Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20231021154827.1142734-1-greearb@candelatech.com [rewrite commit message, add fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: cfg80211: Handle specific BSSID in 6GHz scanningIlan Peer
When the scan parameters for a 6GHz scan specify a unicast BSSID address, and the corresponding AP is found in the scan list, add a corresponding entry in the collocated AP list, so this AP would be directly probed even if it was not advertised as a collocated AP. This is needed for handling a scan request that is intended for a ML probe flow, where user space can requests a scan to retrieve information for other links in the AP MLD. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230928172905.54b954bc02ad.I1c072793d3d77a4c8fbbc64b4db5cce1bbb00382@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-06Merge wireless into wireless-nextJohannes Berg
Resolve several conflicts, mostly between changes/fixes in wireless and the locking rework in wireless-next. One of the conflicts actually shows a bug in wireless that we'll want to fix separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org>
2023-09-25wifi: cfg80211: Fix 6GHz scan configurationIlan Peer
When the scan request includes a non broadcast BSSID, when adding the scan parameters for 6GHz collocated scanning, do not include entries that do not match the given BSSID. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230918140607.6d31d2a96baf.I6c4e3e3075d1d1878ee41f45190fdc6b86f18708@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: remove scan_width supportJohannes Berg
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: wext: avoid extra calls to strlen() in ieee80211_bss()Dmitry Antipov
Since 'sprintf()' returns the number of characters emitted, an extra calls to 'strlen()' in 'ieee80211_bss()' may be dropped. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://lore.kernel.org/r/20230912035522.15947-1-dmantipov@yandex.ru Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: fix off-by-one in element defragJohannes Berg
If a fragment is the last element, it's erroneously not accepted. Fix that. Fixes: f837a653a097 ("wifi: cfg80211: add element defragmentation helper") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.adca9fbd3317.I6b2df45eb71513f3e48efd196ae3cddec362dc1c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-07-26wifi: cfg80211: Fix return value in scan logicIlan Peer
The reporter noticed a warning when running iwlwifi: WARNING: CPU: 8 PID: 659 at mm/page_alloc.c:4453 __alloc_pages+0x329/0x340 As cfg80211_parse_colocated_ap() is not expected to return a negative value return 0 and not a negative value if cfg80211_calc_short_ssid() fails. Fixes: c8cb5b854b40f ("nl80211/cfg80211: support 6 GHz scanning") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217675 Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230723201043.3007430-1-ilan.peer@intel.com
2023-06-21wifi: cfg80211: Retrieve PSD information from RNR AP informationIlan Peer
Retrieve the Power Spectral Density (PSD) value from RNR AP information entry and store it so it could be used by the drivers. PSD value is explained in Section 9.4.2.170 of Draft P802.11Revme_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230619161906.067ded2b8fc3.I9f407ab5800cbb07045a0537a513012960ced740@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: search all RNR elements for colocated APsBenjamin Berg
An AP reporting colocated APs may send more than one reduced neighbor report element. As such, iterate all elements instead of only parsing the first one when looking for colocated APs. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.ffe2c014f478.I372a4f96c88f7ea28ac39e94e0abfc465b5330d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: stop parsing after allocation failureBenjamin Berg
The error handling code would break out of the loop incorrectly, causing the rest of the message to be misinterpreted. Fix this by also jumping out of the surrounding while loop, which will trigger the error detection code. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.0ffac98475cf.I6f5c08a09f5c9fced01497b95a9841ffd1b039f8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: do not scan disabled links on 6GHzBenjamin Berg
If a link is disabled on 6GHz, we should not send a probe request on the channel to resolve it. Simply skip such RNR entries so that the link is ignored. Userspace can still see the link in the RNR and may generate an ML probe request in order to associate to the (currently) disabled link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.4f7384006471.Iff8f1081e76a298bd25f9468abb3a586372cddaa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: handle BSS data contained in ML probe responsesBenjamin Berg
The basic multi-link element within an multi-link probe response will contain full information about BSSes that are part of an MLD AP. This BSS information may be used to associate with a link of an MLD AP without having received a beacon from the BSS itself. This patch adds parsing of the data and adding/updating the BSS using the received elements. Doing this means that userspace can discover the BSSes using an ML probe request and request association on these links. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.29593bd0ae1f.Ic9a67b8f022360aa202b870a932897a389171b14@changeid [swap loop conditions smatch complained about] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: use structs for TBTT information accessBenjamin Berg
Make the data access a bit nicer overall by using structs. There is a small change here to also accept a TBTT information length of eight bytes as we do not require the 20 MHz PSD information. This also fixes a bug reading the short SSID on big endian machines. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.4c3f8901c1bc.Ic3e94fd6e1bccff7948a252ad3bb87e322690a17@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: use a struct for inform_single_bss dataBenjamin Berg
The argument is getting quite large, so use a struct internally to pass around the information. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214436.831ab8a87b6f.I3bcc83d90f41d6f8a47b39528575dad0a9ec3564@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: Always ignore ML elementBenjamin Berg
The element should never be inherited, so always exclude it. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230618214435.c0e17989b4ed.I7cecb5ab7cd6919e61839b50ce5156904b41d7d8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: add element defragmentation helperBenjamin Berg
This is already needed within mac80211 and support is also needed by cfg80211 to parse ML elements. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.29c3ebeed10d.I009c049289dd0162c2e858ed8b68d2875a672ed6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: drop incorrect nontransmitted BSS update codeBenjamin Berg
The removed code ran for any BSS that was not included in the MBSSID element in order to update it. However, instead of using the correct inheritance rules, it would simply copy the elements from the transmitting AP. The result is that we would report incorrect elements in this case. After some discussions, it seems that there are likely not even APs actually using this feature. Either way, removing the code decreases complexity and makes the cfg80211 behaviour more correct. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.cfd6d8db1f26.Ia1044902b86cd7d366400a4bfb93691b8f05d68c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: rewrite merging of inherited elementsBenjamin Berg
The cfg80211_gen_new_ie function merges the IEs using inheritance rules. Rewrite this function to fix issues around inheritance rules. In particular, vendor elements do not require any special handling, as they are either all inherited or overridden by the subprofile. Also, add fragmentation handling as this may be needed in some cases. This also changes the function to not require making a copy. The new version could be optimized a bit by explicitly tracking which IEs have been handled already rather than looking that up again every time. Note that a small behavioural change is the removal of the SSID special handling. This should be fine for the MBSSID element, as the SSID must be included in the subelement. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.bc6152e146db.I2b5f3bc45085e1901e5b5192a674436adaf94748@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: ignore invalid TBTT info field typesBenjamin Berg
The TBTT information field type must be zero. This is only changed in the 802.11be draft specification where the value 1 is used to indicate that only the MLD parameters are included. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.7865606ffe94.I7ff28afb875d1b4c39acd497df8490a7d3628e3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: add inform_bss op to update BSSBenjamin Berg
This new function is called from within the inform_bss(_frame)_data functions in order for the driver to update data that it is tracking. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: keep bss_lock held when informingBenjamin Berg
It is reasonable to hold bss_lock for a little bit longer after cfg80211_bss_update is done. Right now, this does not make any big difference, but doing so in preparation for the next patch which adds a call to the driver. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094948.61701884ff0d.I3358228209eb6766202aff04d1bae0b8fdff611f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: cfg80211: move regulatory_hint_found_beacon to be earlierBenjamin Berg
These calls do not require any locking, so move them in preparation for the next patches. A minor change/bugfix is to not hint a beacon for nontransmitted BSSes Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094948.a5bf3558eae9.I33c7465d983c8bef19deb7a533ee475a16f91774@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07wifi: cfg80211: move scan done work to wiphy workJohannes Berg
Move the scan done work to the new wiphy work to simplify the code a bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: cfg80211: Drop entries with invalid BSSIDs in RNRIlan Peer
Ignore AP information for entries that include an invalid BSSID in the TBTT information field, e.g., all zeros BSSIDs. Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: cleanup unused function parametersMordechay Goodstein
In the past ftype was used for deciding about 6G DUP beacon, but the logic was removed and ftype is not needed anymore. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.98d4761b809b.I255f5ecd77cb24fcf2f1641bb5833ea2d121296e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: correct primary channel validation on 6 GHzMordechay Goodstein
The check that beacon primary channel is in the range of 80 MHz (abs < 80) is invalid for 320 MHz since duplicate beacon transmit means that the AP transmits it on all the 20 MHz sub-channels: 9.4.2.249 HE Operation element - ... AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth. So in case of 320 MHz the DUP beacon can be in upper 160 for primary channel in the lower 160 giving possibly an absolute range of over 80 MHz. Also this check is redundant alltogether, if AP has a wrong primary channel in the beacon it's a faulty AP, and we would fail in next steps to connect. While at it, fix the frequency comparison to no longer compare between KHz and MHz, which was introduced by commit 7f599aeccbd2 ("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel"). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.314faf725255.I5e27251ac558297553b590d3917a7b6d1aae0e74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: wireless: return primary channel regardless of DUPMordechay Goodstein
Currently in case DUP bit is not set we don't return the primary channel for 6 GHz Band, but the spec says that the DUP bit has no effect on this field: 9.4.2.249 HE Operation element: The Duplicate Beacon subfield is set to 1 if the AP transmits Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value that is up to the BSS bandwidth and is set to 0 otherwise. So remove the condition for returning primary channel based on DUP. Since the caller code already marks the signal as invalid in case the indicated frequency is not the tuned frequency, there's no need to additionally handle this case here since that's already true for duplicated beacons on the non-primary channel(s). Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.66d7f05f7d11.I5e0add054f72ede95611391b99804c61c40cc959@changeid [clarify commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-02Merge tag 'wireless-next-2022-12-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7 devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise smaller features and fixes. Major changes: ath10k - store WLAN firmware version in SMEM image table mt76 - mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices - mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support - mt7915: add ack signal support - mt7915: enable coredump support - mt7921: remain_on_channel support - mt7921: channel context support iwlwifi - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support * tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits) wifi: ath10k: fix QCOM_SMEM dependency wifi: mt76: mt7921e: add pci .shutdown() support wifi: mt76: mt7915: mmio: fix naming convention wifi: mt76: mt7996: add support to configure spatial reuse parameter set wifi: mt76: mt7996: enable ack signal support wifi: mt76: mt7996: enable use_cts_prot support wifi: mt76: mt7915: rely on band_idx of mt76_phy wifi: mt76: mt7915: enable per bandwidth power limit support wifi: mt76: mt7915: introduce mt7915_get_power_bound() mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2() wifi: mt76: do not send firmware FW_FEATURE_NON_DL region wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc wifi: mt76: fix coverity overrun-call in mt76_get_txpower() wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power wifi: mt76: mt7915: fix band_idx usage wifi: mt76: mt7915: enable .sta_set_txpwr support wifi: mt76: mt7915: add basedband Txpower info into debugfs wifi: mt76: mt7915: add support to configure spatial reuse parameter set wifi: mt76: mt7915: add missing MODULE_PARM_DESC ... ==================== Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-01wifi: cfg80211: use bss_from_pub() instead of container_of()Johannes Berg
There's no need to open-code container_of() when we have bss_from_pub(). Use it. Change-Id: I074723717909ba211a40e6499f0c36df0e2ba4be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-12-01wifi: cfg80211: fix comparison of BSS frequenciesJUN-KYU SHIN
If the "channel->freq_offset" comparison is omitted in cmp_bss(), BSS with different kHz units cannot be distinguished in the S1G Band. So "freq_offset" should also be included in the comparison. Signed-off-by: JUN-KYU SHIN <jk.shin@newratek.com> Link: https://lore.kernel.org/r/20221111023301.6395-1-jk.shin@newratek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-25wifi: cfg80211: don't allow multi-BSSID in S1GJohannes Berg
In S1G beacon frames there shouldn't be multi-BSSID elements since that's not supported, remove that to avoid a potential integer underflow and/or misparsing the frames due to the different length of the fixed part of the frame. While at it, initialize non_tx_data so we don't send garbage values to the user (even if it doesn't seem to matter now.) Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-25wifi: cfg80211: fix buffer overflow in elem comparisonJohannes Berg
For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-18Merge tag 'wireless-next-2022-11-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.2 Second set of patches for v6.2. Only driver patches this time, nothing really special. Unused platform data support was removed from wl1251 and rtw89 got WoWLAN support. Major changes: ath11k * support configuring channel dwell time during scan rtw89 * new dynamic header firmware format support * Wake-over-WLAN support rtl8xxxu * enable IEEE80211_HW_SUPPORT_FAST_XMIT ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-16wifi: cfg80211: Avoid clashing function prototypesGustavo A. R. Silva
When built with Control Flow Integrity, function prototypes between caller and function declaration must match. These mismatches are visible at compile time with the new -Wcast-function-type-strict in Clang[1]. Fix a total of 73 warnings like these: drivers/net/wireless/intersil/orinoco/wext.c:1379:27: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_param *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] IW_HANDLER(SIOCGIWPOWER, (iw_handler)orinoco_ioctl_getpower), ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../net/wireless/wext-compat.c:1607:33: warning: cast from 'int (*)(struct net_device *, struct iw_request_info *, struct iw_point *, char *)' to 'iw_handler' (aka 'int (*)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') converts to incompatible function type [-Wcast-function-type-strict] [IW_IOCTL_IDX(SIOCSIWGENIE)] = (iw_handler) cfg80211_wext_siwgenie, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/net/wireless/intersil/orinoco/wext.c:1390:27: error: incompatible function pointer types initializing 'const iw_handler' (aka 'int (*const)(struct net_device *, struct iw_request_info *, union iwreq_data *, char *)') with an expression of type 'int (struct net_device *, struct iw_request_info *, struct iw_param *, char *)' [-Wincompatible-function-pointer-types] IW_HANDLER(SIOCGIWRETRY, cfg80211_wext_giwretry), ^~~~~~~~~~~~~~~~~~~~~~ The cfg80211 Wireless Extension handler callbacks (iw_handler) use a union for the data argument. Actually use the union and perform explicit member selection in the function body instead of having a function prototype mismatch. There are no resulting binary differences before/after changes. These changes were made partly manually and partly with the help of Coccinelle. Link: https://github.com/KSPP/linux/issues/234 Link: https://reviews.llvm.org/D134831 [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/a68822bf8dd587988131bb6a295280cb4293f05d.1667934775.git.gustavoars@kernel.org
2022-10-21wifi: cfg80211: silence a sparse RCU warningJohannes Berg
All we're going to do with this pointer is assign it to another __rcu pointer, but sparse can't see that, so use rcu_access_pointer() to silence the warning here. Fixes: c90b93b5b782 ("wifi: cfg80211: update hidden BSSes to avoid WARN_ON") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211: update hidden BSSes to avoid WARN_ONJohannes Berg
When updating beacon elements in a non-transmitted BSS, also update the hidden sub-entries to the same beacon elements, so that a future update through other paths won't trigger a WARN_ON(). The warning is triggered because the beacon elements in the hidden BSSes that are children of the BSS should always be the same as in the parent. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211: avoid nontransmitted BSS list corruptionJohannes Berg
If a non-transmitted BSS shares enough information (both SSID and BSSID!) with another non-transmitted BSS of a different AP, then we can find and update it, and then try to add it to the non-transmitted BSS list. We do a search for it on the transmitted BSS, but if it's not there (but belongs to another transmitted BSS), the list gets corrupted. Since this is an erroneous situation, simply fail the list insertion in this case and free the non-transmitted BSS. This fixes CVE-2022-42721. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211: fix BSS refcounting bugsJohannes Berg
There are multiple refcounting bugs related to multi-BSSID: - In bss_ref_get(), if the BSS has a hidden_beacon_bss, then the bss pointer is overwritten before checking for the transmitted BSS, which is clearly wrong. Fix this by using the bss_from_pub() macro. - In cfg80211_bss_update() we copy the transmitted_bss pointer from tmp into new, but then if we release new, we'll unref it erroneously. We already set the pointer and ref it, but need to NULL it since it was copied from the tmp data. - In cfg80211_inform_single_bss_data(), if adding to the non- transmitted list fails, we unlink the BSS and yet still we return it, but this results in returning an entry without a reference. We shouldn't return it anyway if it was broken enough to not get added there. This fixes CVE-2022-42720. Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: a3584f56de1c ("cfg80211: Properly track transmitting and non-transmitting BSS") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211: ensure length byte is present before accessJohannes Berg
When iterating the elements here, ensure the length byte is present before checking it to see if the entire element will fit into the buffer. Longer term, we should rewrite this code using the type-safe element iteration macros that check all of this. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211/mac80211: reject bad MBSSID elementsJohannes Berg
Per spec, the maximum value for the MaxBSSID ('n') indicator is 8, and the minimum is 1 since a multiple BSSID set with just one BSSID doesn't make sense (the # of BSSIDs is limited by 2^n). Limit this in the parsing in both cfg80211 and mac80211, rejecting any elements with an invalid value. This fixes potentially bad shifts in the processing of these inside the cfg80211_gen_new_bssid() function later. I found this during the investigation of CVE-2022-41674 fixed by the previous patch. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()Johannes Berg
In the copy code of the elements, we do the following calculation to reach the end of the MBSSID element: /* copy the IEs after MBSSID */ cpy_len = mbssid[1] + 2; This looks fine, however, cpy_len is a u8, the same as mbssid[1], so the addition of two can overflow. In this case the subsequent memcpy() will overflow the allocated buffer, since it copies 256 bytes too much due to the way the allocation and memcpy() sizes are calculated. Fix this by using size_t for the cpy_len variable. This fixes CVE-2022-41674. Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Update RNR parsing to align with Draft P802.11be_D2.0Ilan Peer
Based on changes in the specification the TBTT information in the RNR can include MLD information, so update the parsing to allow extracting the short SSID information in such a case. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04cfg80211: retrieve S1G operating channel numberKieran Frewen
When retrieving the S1G channel number from IEs, we should retrieve the operating channel instead of the primary channel. The S1G operation element specifies the main channel of operation as the oper channel, unlike for HT and HE which specify their main channel of operation as the primary channel. Signed-off-by: Kieran Frewen <kieran.frewen@morsemicro.com> Signed-off-by: Bassem Dawood <bassem@morsemicro.com> Link: https://lore.kernel.org/r/20220420041321.3788789-1-kieran.frewen@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-05-10 09:23:18 +0000