summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-01-30xprtrdma: Add struct rpcrdma_regbuf and helpersChuck Lever
There are several spots that allocate a buffer via kmalloc (usually contiguously with another data structure) and then register that buffer internally. I'd like to split the buffers out of these data structures to allow the data structures to scale. Start by adding functions that can kmalloc and register a buffer, and can manage/preserve the buffer's associated ib_sge and ib_mr fields. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Refactor rpcrdma_buffer_create() and rpcrdma_buffer_destroy()Chuck Lever
Move the details of how to create and destroy rpcrdma_req and rpcrdma_rep structures into helper functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Simplify synopsis of rpcrdma_buffer_create()Chuck Lever
Clean up: There is one call site for rpcrdma_buffer_create(). All of the arguments there are fields of an rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Take struct ib_qp_attr and ib_qp_init_attr off the stackChuck Lever
Reduce stack footprint of the connection upcall handler function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Take struct ib_device_attr off the stackChuck Lever
Device attributes are large, and are used in more than one place. Stash a copy in dynamically allocated memory. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Free the pd if ib_query_qp() failsChuck Lever
If ib_query_qp() fails or the memory registration mode isn't supported, don't leak the PD. An orphaned IB/core resource will cause IB module removal to hang. Fixes: bd7ed1d13304 ("RPC/RDMA: check selected memory registration ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rpcrdma_ep::rep_func and ::rep_xprtChuck Lever
Clean up: The rep_func field always refers to rpcrdma_conn_func(). rep_func should have been removed by commit b45ccfd25d50 ("xprtrdma: Remove MEMWINDOWS registration modes"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Move credit update to RPC reply handlerChuck Lever
Reduce work in the receive CQ handler, which can be run at hardware interrupt level, by moving the RPC/RDMA credit update logic to the RPC reply handler. This has some additional benefits: More header sanity checking is done before trusting the incoming credit value, and the receive CQ handler no longer touches the RPC/RDMA header (the CPU stalls while waiting for the header contents to be brought into the cache). This further extends work begun by commit e7ce710a8802 ("xprtrdma: Avoid deadlock when credit window is reset"). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rl_mr field, and the mr_chunk unionChuck Lever
Clean up: Since commit 0ac531c18323 ("xprtrdma: Remove REGISTER memory registration mode"), the rl_mr pointer is no longer used anywhere. After removal, there's only a single member of the mr_chunk union, so mr_chunk can be removed as well, in favor of a single pointer field. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Remove rpcrdma_ep::rep_iaChuck Lever
Clean up: This field is not used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Rename "xprt" and "rdma_connect" fields in struct rpcrdma_xprtChuck Lever
Clean up: Use consistent field names in struct rpcrdma_xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Clean up hdrlenChuck Lever
Clean up: Replace naked integers with a documenting macro. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Display XIDs in host byte orderChuck Lever
xprtsock.c and the backchannel code display XIDs in host byte order. Follow suit in xprtrdma. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: Modernize htonl and ntohlChuck Lever
Clean up: Replace htonl and ntohl with the be32 equivalents. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30xprtrdma: human-readable completion statusChuck Lever
Make it easier to grep the system log for specific error conditions. The wc.opcode field is not included because opcode numbers are sparse, and because wc.opcode is not necessarily valid when completion reports an error. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-01-30ipvs: rerouting to local clients is not needed anymoreJulian Anastasov
commit f5a41847acc5 ("ipvs: move ip_route_me_harder for ICMP") from 2.6.37 introduced ip_route_me_harder() call for responses to local clients, so that we can provide valid rt_src after SNAT. It was used by TCP to provide valid daddr for ip_send_reply(). After commit 0a5ebb8000c5 ("ipv4: Pass explicit daddr arg to ip_send_reply()." from 3.0 this rerouting is not needed anymore and should be avoided, especially in LOCAL_IN. Fixes 3.12.33 crash in xfrm reported by Florian Wiessner: "3.12.33 - BUG xfrm_selector_match+0x25/0x2f6" Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
2015-01-29ipv4: Don't increase PMTU with Datagram Too Big message.Li Wei
RFC 1191 said, "a host MUST not increase its estimate of the Path MTU in response to the contents of a Datagram Too Big message." Signed-off-by: Li Wei <lw@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29dev: add per net_device packet type chainsSalam Noureddine
When many pf_packet listeners are created on a lot of interfaces the current implementation using global packet type lists scales poorly. This patch adds per net_device packet type lists to fix this problem. The patch was originally written by Eric Biederman for linux-2.6.29. Tested on linux-3.16. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Salam Noureddine <noureddine@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29rtnetlink: pass link_net to the newlink handlerNicolas Dichtel
When IFLA_LINK_NETNSID is used, the netdevice should be built in this link netns and moved at the end to another netns (pointed by the socket netns or IFLA_NET_NS_[PID|FD]). Existing user of the newlink handler will use the netns argument (src_net) to find a link netdevice or to check some other information into the link netns. For example, to find a netdevice, two information are required: an ifindex (usually from IFLA_LINK) and a netns (this link netns). Note: when using IFLA_LINK_NETNSID and IFLA_NET_NS_[PID|FD], a user may create a netdevice that stands in netnsX and with its link part in netnsY, by sending a rtnl message from netnsZ. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29caif: remove wrong dev_net_set() callNicolas Dichtel
src_net points to the netns where the netlink message has been received. This netns may be different from the netns where the interface is created (because the user may add IFLA_NET_NS_[PID|FD]). In this case, src_net is the link netns. It seems wrong to override the netns in the newlink() handler because if it was not already src_net, it means that the user explicitly asks to create the netdevice in another netns. CC: Sjur Brændeland <sjur.brandeland@stericsson.com> CC: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Fixes: 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Fixes: c41254006377 ("caif-hsi: Add rtnl support") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Bluetooth: Fix sending Read Remote Extended Features commandSzymon Janc
This command should only be used if remote device reports that it supports extended features. Otherwise command will fail and connection will be dropped. Some devices support SSP but don't support extended features so current check for SSP support is not enought. Instead of checking for SSP support just check if both ends support Extended Feature. < HCI Command: Create Connection (0x01|0x0005) plen 13 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Packet type: 0xcc18 DM1 may be used DH1 may be used DM3 may be used DH3 may be used DM5 may be used DH5 may be used Page scan repetition mode: R1 (0x01) Page scan mode: Mandatory (0x00) Clock offset: 0x94c8 Role switch: Allow slave (0x01) > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) ncmd 1 Status: Success (0x00) > HCI Event: Connect Complete (0x03) plen 11 Status: Success (0x00) Handle: 5 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Link type: ACL (0x01) Encryption: Disabled (0x00) < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) ncmd 1 Status: Success (0x00) > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 Address: D0:9C:30:00:19:6F (Foster Electric Company, Limited) Page scan repetition mode: R1 (0x01) > HCI Event: Read Remote Supported Features (0x0b) plen 11 Status: Success (0x00) Handle: 5 Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x07 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Park state Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Paging parameter negotiation Power control Transparent synchronous data Broadcast Encryption Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) EV4 packets EV5 packets AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode 3-slot Enhanced Data Rate eSCO packets Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 Handle: 5 Page: 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) ncmd 1 Status: Command Disallowed (0x0c) < HCI Command: Read Clock Offset (0x01|0x001f) plen 2 Handle: 5 > HCI Event: Command Status (0x0f) plen 4 Read Clock Offset (0x01|0x001f) ncmd 1 Status: Success (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 5 Reason: Remote User Terminated Connection (0x13) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28tcp: ipv4: initialize unicast_sock sk_pacing_rateEric Dumazet
When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 95bd09eb2750 ("tcp: TSO packets automatic sizing") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28pkt_sched: fq: remove useless TIME_WAIT checkEric Dumazet
TIME_WAIT sockets are not owning any skb. ip_send_unicast_reply() and tcp_v6_send_response() both use regular sockets. We can safely remove a test in sch_fq and save one cache line miss, as sk_state is far away from sk_pacing_rate. Tested at Google for about one year. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28act_connmark: fix dependencies betterArnd Bergmann
NET_ACT_CONNMARK fails to build if NF_CONNTRACK_MARK is disabled, and d7924450e14ea4 ("act_connmark: Add missing dependency on NF_CONNTRACK_MARK") fixed that case, but missed the cased where NF_CONNTRACK is a loadable module. This adds the second dependency to ensure that NET_ACT_CONNMARK can only be built-in if NF_CONNTRACK is also part of the kernel rather than a loadable module. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28net: remove sock_iocbChristoph Hellwig
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28openvswitch: Add support for checksums on UDP tunnels.Jesse Gross
Currently, it isn't possible to request checksums on the outer UDP header of tunnels - the TUNNEL_CSUM flag is ignored. This adds support for requesting that UDP checksums be computed on transmit and properly reported if they are present on receive. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28Merge tag 'nfc-next-3.20-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28bridge: dont send notification when skb->len == 0 in rtnl_bridge_notifyRoopa Prabhu
Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix timing issue in CUBIC slope calculationNeal Cardwell
This patch fixes a bug in CUBIC that causes cwnd to increase slightly too slowly when multiple ACKs arrive in the same jiffy. If cwnd is supposed to increase at a rate of more than once per jiffy, then CUBIC was sometimes too slow. Because the bic_target is calculated for a future point in time, calculated with time in jiffies, the cwnd can increase over the course of the jiffy while the bic_target calculated as the proper CUBIC cwnd at time t=tcp_time_stamp+rtt does not increase, because tcp_time_stamp only increases on jiffy tick boundaries. So since the cnt is set to: ca->cnt = cwnd / (bic_target - cwnd); as cwnd increases but bic_target does not increase due to jiffy granularity, the cnt becomes too large, causing cwnd to increase too slowly. For example: - suppose at the beginning of a jiffy, cwnd=40, bic_target=44 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 40 / (44 - 40) = 40/4 = 10 - suppose we get 10 acks, each for 1 segment, so tcp_cong_avoid_ai() increases cwnd to 41 - so CUBIC sets: ca->cnt = cwnd / (bic_target - cwnd) = 41 / (44 - 41) = 41 / 3 = 13 So now CUBIC will wait for 13 packets to be ACKed before increasing cwnd to 42, insted of 10 as it should. The fix is to avoid adjusting the slope (determined by ca->cnt) multiple times within a jiffy, and instead skip to compute the Reno cwnd, the "TCP friendliness" code path. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix stretch ACK bugs in CUBICNeal Cardwell
Change CUBIC to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, because we are now precisely accounting for stretch ACKs, including delayed ACKs, we can now remove the delayed ACK tracking and estimation code that tracked recent delayed ACK behavior in ca->delayed_ack. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix stretch ACK bugs in RenoNeal Cardwell
Change Reno to properly handle stretch ACKs in additive increase mode by passing in the count of ACKed packets to tcp_cong_avoid_ai(). In addition, if snd_cwnd crosses snd_ssthresh during slow start processing, and we then exit slow start mode, we need to carry over any remaining "credit" for packets ACKed and apply that to additive increase by passing this remaining "acked" count to tcp_cong_avoid_ai(). Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: fix the timid additive increase on stretch ACKsNeal Cardwell
tcp_cong_avoid_ai() was too timid (snd_cwnd increased too slowly) on "stretch ACKs" -- cases where the receiver ACKed more than 1 packet in a single ACK. For example, suppose w is 10 and we get a stretch ACK for 20 packets, so acked is 20. We ought to increase snd_cwnd by 2 (since acked/w = 20/10 = 2), but instead we were only increasing cwnd by 1. This patch fixes that behavior. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28tcp: stretch ACK fixes prepNeal Cardwell
LRO, GRO, delayed ACKs, and middleboxes can cause "stretch ACKs" that cover more than the RFC-specified maximum of 2 packets. These stretch ACKs can cause serious performance shortfalls in common congestion control algorithms that were designed and tuned years ago with receiver hosts that were not using LRO or GRO, and were instead politely ACKing every other packet. This patch series fixes Reno and CUBIC to handle stretch ACKs. This patch prepares for the upcoming stretch ACK bug fix patches. It adds an "acked" parameter to tcp_cong_avoid_ai() to allow for future fixes to tcp_cong_avoid_ai() to correctly handle stretch ACKs, and changes all congestion control algorithms to pass in 1 for the ACKed count. It also changes tcp_slow_start() to return the number of packet ACK "credits" that were not processed in slow start mode, and can be processed by the congestion control module in additive increase mode. In future patches we will fix tcp_cong_avoid_ai() to handle stretch ACKs, and fix Reno and CUBIC handling of stretch ACKs in slow start and additive increase mode. Reported-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-29Bluetooth: Move smp_unregister() into hci_dev_do_close() functionMarcel Holtmann
The smp_unregister() function needs to be called every time the controller is powered down. There are multiple entry points when this can happen. One is "hciconfig hci0 reset" which will throw a WARN_ON when LE support has been enabled. [ 78.564620] WARNING: CPU: 0 PID: 148 at net/bluetooth/smp.c:3075 smp_register+0xf1/0x170() [ 78.564622] Modules linked in: [ 78.564628] CPU: 0 PID: 148 Comm: kworker/u3:1 Not tainted 3.19.0-rc4-devel+ #404 [ 78.564629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [ 78.564635] Workqueue: hci0 hci_rx_work [ 78.564638] ffffffff81b4a7a2 ffff88001cb2fb38 ffffffff8161d881 0000000080000000 [ 78.564642] 0000000000000000 ffff88001cb2fb78 ffffffff8103b870 696e55206e6f6f6d [ 78.564645] ffff88001d965000 0000000000000000 0000000000000000 ffff88001d965000 [ 78.564648] Call Trace: [ 78.564655] [<ffffffff8161d881>] dump_stack+0x4f/0x7b [ 78.564662] [<ffffffff8103b870>] warn_slowpath_common+0x80/0xc0 [ 78.564667] [<ffffffff81544b00>] ? add_uuid+0x1f0/0x1f0 [ 78.564671] [<ffffffff8103b955>] warn_slowpath_null+0x15/0x20 [ 78.564674] [<ffffffff81562d81>] smp_register+0xf1/0x170 [ 78.564680] [<ffffffff81081236>] ? lock_timer_base.isra.30+0x26/0x50 [ 78.564683] [<ffffffff81544bf0>] powered_complete+0xf0/0x120 [ 78.564688] [<ffffffff8152e622>] hci_req_cmd_complete+0x82/0x260 [ 78.564692] [<ffffffff8153554f>] hci_cmd_complete_evt+0x6cf/0x2e20 [ 78.564697] [<ffffffff81623e43>] ? _raw_spin_unlock_irqrestore+0x13/0x30 [ 78.564701] [<ffffffff8106b0af>] ? __wake_up_sync_key+0x4f/0x60 [ 78.564705] [<ffffffff8153a2ab>] hci_event_packet+0xbcb/0x2e70 [ 78.564709] [<ffffffff814094d3>] ? skb_release_all+0x23/0x30 [ 78.564711] [<ffffffff81409529>] ? kfree_skb+0x29/0x40 [ 78.564715] [<ffffffff815296c8>] hci_rx_work+0x1c8/0x3f0 [ 78.564719] [<ffffffff8105bd91>] ? get_parent_ip+0x11/0x50 [ 78.564722] [<ffffffff8105be25>] ? preempt_count_add+0x55/0xb0 [ 78.564727] [<ffffffff8104f65f>] process_one_work+0x12f/0x360 [ 78.564731] [<ffffffff8104ff9b>] worker_thread+0x6b/0x4b0 [ 78.564735] [<ffffffff8104ff30>] ? cancel_delayed_work_sync+0x10/0x10 [ 78.564738] [<ffffffff810542fa>] kthread+0xea/0x100 [ 78.564742] [<ffffffff81620000>] ? __schedule+0x3e0/0x980 [ 78.564745] [<ffffffff81054210>] ? kthread_create_on_node+0x180/0x180 [ 78.564749] [<ffffffff816246ec>] ret_from_fork+0x7c/0xb0 [ 78.564752] [<ffffffff81054210>] ? kthread_create_on_node+0x180/0x180 [ 78.564755] ---[ end trace 8b0d943af76d3736 ]--- This warning is not critical and has only been placed in the code to actually catch this exact situation. To avoid triggering it move the smp_unregister() into hci_dev_do_close() which will now also take care of remove the SMP channel. It is safe to call this function since it only remove the channel if it has been previously registered. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Perform a power cycle when receiving hardware error eventMarcel Holtmann
When receiving a HCI Hardware Error event, the controller should be assumed to be non-functional until issuing a HCI Reset command. The Bluetooth hardware errors are vendor specific and so add a new hdev->hw_error callback that drivers can provide to run extra code to handle the hardware error. After completing the vendor specific error handling perform a full reset of the Bluetooth stack by closing and re-opening the transport. Based-on-patch-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Introduce hci_dev_do_reset helper functionMarcel Holtmann
Split the hci_dev_reset ioctl handling into using hci_dev_do_reset helper function. Similar to what has been done with hci_dev_do_open and hci_dev_do_close. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Fix notifying discovery state when powering offJohan Hedberg
The discovery state should be set to stopped when the HCI device is powered off. This patch adds the appropriate call to the hci_discovery_set_state() function from hci_dev_do_close() which is responsible for the power-off procedure. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: Fix notifying discovery state upon resetJohan Hedberg
When HCI_Reset is issued the discovery state is assumed to be stopped. The hci_cc_reset() handler was trying to set the state but it was doing it without using the hci_discovery_set_state() function. Because of this e.g. the mgmt Discovering event could go without being sent. This patch fixes the code to use the hci_discovery_set_state() function instead of just blindly setting the state value. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: Fix check for SSP when enabling SCJohan Hedberg
There's a check in set_secure_conn() that's supposed to ensure that SSP is enabled before we try to request the controller to enable SC (since SSP is a pre-requisite for it). However, this check only makes sense for controllers actually supporting BR/EDR SC. If we have a 4.0 controller we're only interested in the LE part of SC and should therefore not be requiring SSP to be enabled. This patch adds an additional condition to check for lmp_sc_capable(hdev) before requiring SSP to be enabled. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-28Bluetooth: Check for P-256 OOB values in Secure Connections Only modeMarcel Holtmann
If Secure Connections Only mode has been enabled, the it is important to check that OOB data for P-256 values is provided. In case it is not, then tell the remote side that no OOB data is present. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Use helper function to determine BR/EDR OOB data presentMarcel Holtmann
When replying to the IO capability request for Secure Simple Pairing and Secure Connections, the OOB data present fields needs to set. Instead of making the calculation inline, split this into a separate helper function. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Clear P-192 values for OOB when in Secure Connections Only modeMarcel Holtmann
When Secure Connections Only mode has been enabled and remote OOB data is requested, then only provide P-256 hash and randomizer vaulues. The fields for P-192 hash and randomizer should be set to zero. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-28Bluetooth: Enforce zero-valued hash/rand192 for LE OOBJohan Hedberg
Until legacy SMP OOB pairing is implemented user space should be given a clear error when trying to use it. This patch adds a corresponding check to the Add Remote OOB Data handler function which returns "invalid parameters" if non-zero Rand192 or Hash192 parameters were given for an LE address. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-28NFC: hci: Remove nfc_hci_pipe2gate functionChristophe Ricard
With the newly introduced pipes table hci_dev fields, the nfc_hci_pipe2gate routine is no longer needed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Add cmd_received handlerChristophe Ricard
When a command is received, it is sometime needed to let the CLF driver do some additional operations. (ex: count remaining pipe notification...) Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-28NFC: hci: Reference every pipe information according to notificationChristophe Ricard
We update the tracked pipes status when receiving HCI commands. Also we forward HCI errors and we reply to any HCI command, even though we don't support it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change nfc_hci_send_response gate parameter to pipeChristophe Ricard
As there can be several pipes connected to the same gate, we need to know which pipe ID to use when sending an HCI response. A gate ID is not enough. Instead of changing the nfc_hci_send_response() API to something not aligned with the rest of the HCI API, we call nfc_hci_hcp_message_tx directly. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Add pipes table to reference them with a tuple {gate, host}Christophe Ricard
In order to keep host source information on specific hci event (such as evt_connectivity or evt_transaction) and because 2 pipes can be connected to the same gate, it is necessary to add a table referencing every pipe with a {gate, host} tuple. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-01-27NFC: hci: Change event_received handler gate parameter to pipeChristophe Ricard
Several pipes may point to the same CLF gate, so getting the gate ID as an input is not enough. For example dual secure element may have 2 pipes (1 for uicc and 1 for eSE) pointing to the connectivity gate. As resolving gate and host IDs can be done from a pipe, we now pass the pipe ID to the event received handler. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-07-19 20:10:05 +0000