| Age | Commit message (Collapse) | Author |
|---|
|
There is a preferred order for the entries in MAINTAINERS sections.
See commits 3b50142d8528 ("MAINTAINERS: sort field names for all
entries") and 6680125ea5a2 ("MAINTAINERS: list the section entries in
the preferred order")
Add checkpatch tests to try to keep that ordering.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: http://lkml.kernel.org/r/17677130b3ca62d79817e6a22546bad39d7e81b4.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_maintainer behaves differently if there is a double sequential forward
slash in a filename because the total number of slashes in a filename is
used to match MAINTAINERS file patterns.
For example:
(with double slash)
$ ./scripts/get_maintainer.pl -f drivers/gpu/drm//lima
David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS,commit_signer:3/42=7%)
Qiang Yu <yuq825@gmail.com> (commit_signer:36/42=86%,authored:24/42=57%)
Vasily Khoruzhick <anarsoul@gmail.com> (commit_signer:26/42=62%)
Krzysztof Kozlowski <krzk@kernel.org> (commit_signer:5/42=12%,authored:5/42=12%)
Emil Velikov <emil.velikov@collabora.com> (commit_signer:4/42=10%)
dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
linux-kernel@vger.kernel.org (open list)
(without double slash)
$ ./scripts/get_maintainer.pl -f drivers/gpu/drm/lima
Qiang Yu <yuq825@gmail.com> (maintainer:DRM DRIVERS FOR LIMA)
David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
dri-devel@lists.freedesktop.org (open list:DRM DRIVERS FOR LIMA)
lima@lists.freedesktop.org (moderated list:DRM DRIVERS FOR LIMA)
linux-kernel@vger.kernel.org (open list)
So reduce consecutive double slashes to a single slash
by using File::Spec->canonpath().
from: https://perldoc.perl.org/File/Spec/Unix.html
canonpath()
No physical check on the filesystem, but a logical cleanup of a path. On
UNIX eliminates successive slashes and successive "/.".
Reported-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/9a18b611813bb409fef15bc8927adab79eb9be43.camel@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
.yaml files can contain maintainer/author addresses and it seems unlikely
or unnecessary that individual MAINTAINER file section entries for each
.yaml file will be created.
So add the email addresses found in .yaml files to the default
get_maintainer output.
The email addresses are marked with "(in file)" when using the "--roles"
or "--rolestats" options.
Miscellanea:
o Change $file_emails to $email_file_emails to avoid visual
naming conflicts with @file_emails
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/e85006456d9dbae55286c67ac5263668a72f5b58.1588022228.git.joe@perches.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking updates from David Miller:
1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
Augusto von Dentz.
2) Add GSO partial support to igc, from Sasha Neftin.
3) Several cleanups and improvements to r8169 from Heiner Kallweit.
4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
device self-test. From Andrew Lunn.
5) Start moving away from custom driver versions, use the globally
defined kernel version instead, from Leon Romanovsky.
6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.
7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.
8) Add sriov and vf support to hinic, from Luo bin.
9) Support Media Redundancy Protocol (MRP) in the bridging code, from
Horatiu Vultur.
10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.
11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
Dubroca. Also add ipv6 support for espintcp.
12) Lots of ReST conversions of the networking documentation, from Mauro
Carvalho Chehab.
13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
from Doug Berger.
14) Allow to dump cgroup id and filter by it in inet_diag code, from
Dmitry Yakunin.
15) Add infrastructure to export netlink attribute policies to
userspace, from Johannes Berg.
16) Several optimizations to sch_fq scheduler, from Eric Dumazet.
17) Fallback to the default qdisc if qdisc init fails because otherwise
a packet scheduler init failure will make a device inoperative. From
Jesper Dangaard Brouer.
18) Several RISCV bpf jit optimizations, from Luke Nelson.
19) Correct the return type of the ->ndo_start_xmit() method in several
drivers, it's netdev_tx_t but many drivers were using
'int'. From Yunjian Wang.
20) Add an ethtool interface for PHY master/slave config, from Oleksij
Rempel.
21) Add BPF iterators, from Yonghang Song.
22) Add cable test infrastructure, including ethool interfaces, from
Andrew Lunn. Marvell PHY driver is the first to support this
facility.
23) Remove zero-length arrays all over, from Gustavo A. R. Silva.
24) Calculate and maintain an explicit frame size in XDP, from Jesper
Dangaard Brouer.
25) Add CAP_BPF, from Alexei Starovoitov.
26) Support terse dumps in the packet scheduler, from Vlad Buslov.
27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.
28) Add devm_register_netdev(), from Bartosz Golaszewski.
29) Minimize qdisc resets, from Cong Wang.
30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
eliminate set_fs/get_fs calls. From Christoph Hellwig.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
selftests: net: ip_defrag: ignore EPERM
net_failover: fixed rollback in net_failover_open()
Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
vmxnet3: allow rx flow hash ops only when rss is enabled
hinic: add set_channels ethtool_ops support
selftests/bpf: Add a default $(CXX) value
tools/bpf: Don't use $(COMPILE.c)
bpf, selftests: Use bpf_probe_read_kernel
s390/bpf: Use bcr 0,%0 as tail call nop filler
s390/bpf: Maintain 8-byte stack alignment
selftests/bpf: Fix verifier test
selftests/bpf: Fix sample_cnt shared between two threads
bpf, selftests: Adapt cls_redirect to call csum_level helper
bpf: Add csum_level helper for fixing up csum levels
bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
crypto/chtls: IPv6 support for inline TLS
Crypto/chcr: Fixes a coccinile check error
Crypto/chcr: Fixes compilations warnings
...
|
|
Currently, modpost reads extra symbol dump files in the reverse order.
If '-e foo -e bar' is given, modpost reads bar, foo, in this order.
This is probably not a big deal, but there is no good reason to reverse
the order. Read files in the given order.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The built-in only code is not required to have MODULE_IMPORT_NS() to
use symbols. So, the namespace is not checked for vmlinux(.o).
Do not pass the meaningless -N option to the first pass of modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The '-T -' option reads the file list from stdin.
It is clearer to put it close to the piped command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
$(filter -i,$(MAKEFLAGS)) works only in limited use-cases.
The representation of $(MAKEFLAGS) depends on various factors:
- GNU Make version (version 3.8x or version 4.x)
- The presence of other flags like -j
In my experiments, $(MAKEFLAGS) is expanded as follows:
* GNU Make 3.8x:
* without -j option:
--no-print-directory -Rri
* with -j option:
--no-print-directory -Rr --jobserver-fds=3,4 -j -i
* GNU Make 4.x:
* without -j option:
irR --no-print-directory
* with -j option:
irR -j --jobserver-fds=3,4 --no-print-directory
For GNU Make 4.x, the flags are grouped as 'irR', which does not work.
For the single thread build with GNU Make 3.8x, the flags are grouped
as '-Rri', which does not work either.
To make it work for all cases, do likewise as commit 6f0fa58e4596
("kbuild: simplify silent build (-s) detection").
BTW, since commit ff9b45c55b26 ("kbuild: modpost: read modules.order
instead of $(MODVERDIR)/*.mod"), you also need to pass -k option to
build final *.ko files. 'make -i -k' ignores compile errors in modules,
and build as many remaining *.ko as possible.
Please note this feature is kind of dangerous if other modules depend
on the broken module because the generated modules will lack the correct
module dependency or CRC. Honestly, I am not a big fan of it, but I am
keeping this feature.
Fixes: eed380f3f593 ("modpost: Optionally ignore secondary errors seen if a single module build fails")
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Make modules.order depend on $(obj-m), and use if_changed to build it.
This will avoid unneeded update of modules.order, which will be useful
to optimize the modpost stage.
Currently, the second pass of modpost is always invoked. By checking the
timestamp of modules.order, we can avoid the unneeded modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Pull documentation updates from Jonathan Corbet:
"A fair amount of stuff this time around, dominated by yet another
massive set from Mauro toward the completion of the RST conversion. I
*really* hope we are getting close to the end of this. Meanwhile,
those patches reach pretty far afield to update document references
around the tree; there should be no actual code changes there. There
will be, alas, more of the usual trivial merge conflicts.
Beyond that we have more translations, improvements to the sphinx
scripting, a number of additions to the sysctl documentation, and lots
of fixes"
* tag 'docs-5.8' of git://git.lwn.net/linux: (130 commits)
Documentation: fixes to the maintainer-entry-profile template
zswap: docs/vm: Fix typo accept_threshold_percent in zswap.rst
tracing: Fix events.rst section numbering
docs: acpi: fix old http link and improve document format
docs: filesystems: add info about efivars content
Documentation: LSM: Correct the basic LSM description
mailmap: change email for Ricardo Ribalda
docs: sysctl/kernel: document unaligned controls
Documentation: admin-guide: update bug-hunting.rst
docs: sysctl/kernel: document ngroups_max
nvdimm: fixes to maintainter-entry-profile
Documentation/features: Correct RISC-V kprobes support entry
Documentation/features: Refresh the arch support status files
Revert "docs: sysctl/kernel: document ngroups_max"
docs: move locking-specific documents to locking/
docs: move digsig docs to the security book
docs: move the kref doc into the core-api book
docs: add IRQ documentation at the core-api book
docs: debugging-via-ohci1394.txt: add it to the core-api book
docs: fix references for ipmi.rst file
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"There are a lot of objtool changes in this cycle, all across the map:
- Speed up objtool significantly, especially when there are large
number of sections
- Improve objtool's understanding of special instructions such as
IRET, to reduce the number of annotations required
- Implement 'noinstr' validation
- Do baby steps for non-x86 objtool use
- Simplify/fix retpoline decoding
- Add vmlinux validation
- Improve documentation
- Fix various bugs and apply smaller cleanups"
* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
objtool: Enable compilation of objtool for all architectures
objtool: Move struct objtool_file into arch-independent header
objtool: Exit successfully when requesting help
objtool: Add check_kcov_mode() to the uaccess safelist
samples/ftrace: Fix asm function ELF annotations
objtool: optimize add_dead_ends for split sections
objtool: use gelf_getsymshndx to handle >64k sections
objtool: Allow no-op CFI ops in alternatives
x86/retpoline: Fix retpoline unwind
x86: Change {JMP,CALL}_NOSPEC argument
x86: Simplify retpoline declaration
x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
objtool: Add support for intra-function calls
objtool: Move the IRET hack into the arch decoder
objtool: Remove INSN_STACK
objtool: Make handle_insn_ops() unconditional
objtool: Rework allocating stack_ops on decode
objtool: UNWIND_HINT_RET_OFFSET should not check registers
objtool: is_fentry_call() crashes if call has no destination
x86,smap: Fix smap_{save,restore}() alternatives
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kprobes updates from Ingo Molnar:
"Various kprobes updates, mostly centered around cleaning up the
no-instrumentation logic.
Instead of the current per debug facility blacklist, use the more
generic .noinstr.text approach, combined with a 'noinstr' marker for
functions.
Also add instrumentation_begin()/end() to better manage the exact
place in entry code where instrumentation may be used.
And add a kprobes blacklist for modules"
* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Prevent probes in .noinstr.text section
vmlinux.lds.h: Create section for protection against instrumentation
samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
kprobes: Support NOKPROBE_SYMBOL() in modules
kprobes: Support __kprobes blacklist in modules
kprobes: Lock kprobe_mutex while showing kprobe_blacklist
|
|
sh5 never became a product and has probably never really worked.
Remove it by recursively deleting all associated Kconfig options
and all corresponding files.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
Remove lib-target, builtin-target, modorder-target, and modtargets.
Instead, add targets-for-builtin and targets-for-modules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Remove the unneeded variables, __subdir-y and __subdir-m.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Yes, staying withing 80 columns is certainly still _preferred_. But
it's not the hard limit that the checkpatch warnings imply, and other
concerns can most certainly dominate.
Increase the default limit to 100 characters. Not because 100
characters is some hard limit either, but that's certainly a "what are
you doing" kind of value and less likely to be about the occasional
slightly longer lines.
Miscellanea:
- to avoid unnecessary whitespace changes in files, checkpatch will no
longer emit a warning about line length when scanning files unless
--strict is also used
- Add a bit to coding-style about alignment to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use sym_get_data_by_offset() helper to get access to the .shstrtab
section data. No functional change is intended because
elf->sechdrs[elf->secindex_strings].sh_addr is 0 for both ET_REL
and ET_EXEC object types.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This may not be a practical problem, but the second pass of ARCH=i386
modpost causes segmentation fault if the -s option is not passed.
MODPOST 12 modules
Segmentation fault (core dumped)
make[2]: *** [scripts/Makefile.modpost:94: __modpost] Error 139
make[1]: *** [Makefile:1339: modules] Error 2
make[1]: *** Waiting for unfinished jobs....
The segmentation fault occurs when section_rel() is called for vmlinux,
which is untested in regular builds. The cause of the problem is
reloc_location() returning a wrong pointer for ET_EXEC object type.
In this case, you need to subtract sechdr->sh_addr, otherwise it would
get access beyond the mmap'ed memory.
Add sym_get_data_by_offset() helper to avoid code duplication.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
$(firstword ...) in scripts/Makefile.modpost was added by commit
3f3fd3c05585 ("[PATCH] kbuild: allow multi-word $M in Makefile.modpost")
to build multiple external module directories.
It was a solution to resolve symbol dependencies when an external
module depends on another external module.
Commit 0d96fb20b7ed ("kbuild: Add new Kbuild variable
KBUILD_EXTRA_SYMBOLS") introduced another solution by passing symbol
info via KBUILD_EXTRA_SYMBOLS, then broke the multi-word M= support.
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
... does not work if KBUILD_EXTMOD contains multiple words.
This feature has been broken for more than a decade. Remove the
bitrotten code, and stop parsing if M or KBUILD_EXTMOD contains
multiple words.
As Documentation/kbuild/modules.rst explains, if your module depends
on another one, there are two solutions:
- add a common top-level Kbuild file
- use KBUILD_EXTRA_SYMBOLS
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
built-in.a contains the built-in object paths from the current and sub
directories.
module.order collects the module paths from the current and sub
directories.
Make their build rules look more symmetrical.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I think subdir-builtin is clearer.
While I was here, I made its build rule explicit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Save $(addprefix ...) for subdir-obj-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Do not try to build any module-related artifacts when CONFIG_MODULES
is disabled.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I do not see a good reason to add ifdef here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I think all the warnings have been fixed by now. Make it a fatal error.
Check it before modpost because we need to stop building *.ko files.
Also, pass modules.order via a script parameter.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This is the remnant of commit c17d6179ad5a ("gcc-plugins: remove unused
GCC_PLUGIN_SUBDIR").
The conditional $(if $(findstring /,$(p)),...) is always false because
none of plugins contains '/' in the file name.
Clean up the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
if objdump has below entries;
c01ed608 <X>:
c01ed614: e24ddff7 sub sp, sp, #120 ; 0x78
c01f0d50 <Y>:
c01f0d50: e24dd094 sub sp, sp, #140 ; 0x8c
scripts fails to read stack usage.
so making regex $re for ARM similar to aarch64
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
To count stack usage of push {*, fp, ip, lr, pc} instruction in ARM,
if FRAME POINTER is enabled.
e.g. c01f0d48: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
c01f0d50 <Y>:
c01f0d44: e1a0c00d mov ip, sp
c01f0d48: e92ddff0 push {r4, r5, r6, r7, r8, r9, sl, fp, ip, lr, pc}
c01f0d4c: e24cb004 sub fp, ip, #4
c01f0d50: e24dd094 sub sp, sp, #448 ; 0x1C0
$ cat dump | scripts/checkstack.pl arm
0xc01f0d50 Y []: 448
added subroutine frame work for this.
After change:
0xc01f0d500 Y []: 492
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add arguments support to print stacks which are greater than
argument value only.
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
currently script prints stack usage for functions
in two ways:($re and $dre)
dre breaks sorting mechanism.
0xffffa00011f26f88 sunxi_mux_clk_setup.isra.0 [vmlinux]:Dynamic (0x140)
..
0xffffa00011f27210 sunxi_divs_clk_setup [vmlinux]: Dynamic (0x1d0)
so we can print it in decimal only.
Also address before function name is changed to function
start address rather than stack consumption address.
Because in next patch, arm has two ways to use stack
which can be clubbed and printed in one function only.
All symbols whose stack by adding(re and dre) is greater than
100, will be printed.
0xffffa00011f2720c0 sunxi_divs_clk_setup [vmlinux]: 464
...
0xffffa00011f26f840 sunxi_mux_clk_setup.isra.0 [vmlinux]:320
Co-developed-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Misuse of CONFIG_* in UAPI headers should result in an error. These config
options can be set in userspace by the user application which includes
these headers to control the APIs and structures being used in a kernel
which supports multiple targets.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
kvmconfig' is a shorthand for kvm_guest.config to save 7 character typing.
xenconfig' is a shorthand for xen.config to save 1 character typing.
There is nothing more than that.
There are more files in kernel/configs/, so it is not maintainable
to wire-up every config fragment to the Kconfig Makefile. Hence,
we should not do this at all.
These will be removed after Linux 5.10. Meanwhile, the following
warning message will be displayed if they are used.
WARNING: 'make kvmconfig' will be removed after Linux 5.10
Please use 'make kvm_guest.config' instead.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Some code pathes, especially the low level entry code, must be protected
against instrumentation for various reasons:
- Low level entry code can be a fragile beast, especially on x86.
- With NO_HZ_FULL RCU state needs to be established before using it.
Having a dedicated section for such code allows to validate with tooling
that no unsafe functions are invoked.
Add the .noinstr.text section and the noinstr attribute to mark
functions. noinstr implies notrace. Kprobes will gain a section check
later.
Provide also a set of markers: instrumentation_begin()/end()
These are used to mark code inside a noinstr function which calls
into regular instrumentable text section as safe.
The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is
enabled as the end marker emits a NOP to prevent the compiler from merging
the annotation points. This means the objtool verification requires a
kernel compiled with this option.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de
|
|
semantic conflict
Resolve structural conflict between:
59566b0b622e: ("x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up")
which introduced a new reference to 'ftrace_epilogue', and:
0298739b7983: ("x86,ftrace: Fix ftrace_regs_caller() unwind")
Which renamed it to 'ftrace_caller_end'. Rename the new usage site in the merge commit.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Kbuild supports the infrastructure to build host programs, but there
was no support to build userspace programs for the target architecture
(i.e. the same architecture as the kernel).
Sam Ravnborg worked on this in 2014 (https://lkml.org/lkml/2014/7/13/154),
but it was not merged. One problem at that time was, there was no good way
to know whether $(CC) can link standalone programs. In fact, pre-built
kernel.org toolchains [1] are often used for building the kernel, but they
do not provide libc.
Now, we can handle this cleanly because the compiler capability is
evaluated at the Kconfig time. If $(CC) cannot link standalone programs,
the relevant options are hidden by 'depends on CC_CAN_LINK'.
The implementation just mimics scripts/Makefile.host
The userspace programs are compiled with the same flags as the host
programs. In addition, it uses -m32 or -m64 if it is found in
$(KBUILD_CFLAGS).
This new syntax has two usecases.
- Sample programs
Several userspace programs under samples/ include UAPI headers
installed in usr/include. Most of them were previously built for
the host architecture just to use the 'hostprogs' syntax.
However, 'make headers' always works for the target architecture.
This caused the arch mismatch in cross-compiling. To fix this
distortion, sample code should be built for the target architecture.
- Bpfilter
net/bpfilter/Makefile compiles bpfilter_umh as the user mode helper,
and embeds it into the kernel. Currently, it overrides HOSTCC with
CC to use the 'hostprogs' syntax. This hack should go away.
[1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
|
|
always, hostprogs-y, and hostprogs-m are deprecated.
There is no user in upstream code, but I will keep them for external
modules. I want to remove them entirely someday. Prompt downstream
users for the migration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Move the bpf verifier trace check into the new switch statement in
HEAD.
Resolve the overlapping changes in hinic, where bug fixes overlap
the addition of VF support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-05-14
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON.
2) support for narrow loads in bpf_sock_addr progs and additional
helpers in cg-skb progs, from Andrey.
3) bpf benchmark runner, from Andrii.
4) arm and riscv JIT optimizations, from Luke.
5) bpf iterator infrastructure, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sometimes it is useful to preserve batches of configs when making
localmodconfig. For example, I usually don't want any usb and fs
modules to be disabled. Now we can do it by:
$ make LMC_KEEP="drivers/usb:fs" localmodconfig
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
cmd_dtc takes the additional parameter $(2) to select the target
format, dtb or yaml. This makes things complicated when it is used
with cmd_and_fixdep and if_changed_rule. I actually stumbled on this.
See commit 3d4b2238684a ("kbuild: fix DT binding schema rule again to
avoid needless rebuilds").
Extract the suffix part of the target instead of passing the parameter.
Fortunately, this works for both $(obj)/%.dtb and $(obj)/%.dt.yaml .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
scripts/mkcompile_h runs $(CC) just for getting the version string.
Reuse CONFIG_CC_VERSION_TEXT for optimization.
For GCC, this slightly changes the version string. I do not think it
is a big deal as we do not have the defined format for LINUX_COMPILER.
In fact, the recent commit 4dcc9a88448a ("kbuild: mkcompile_h:
Include $LD version in /proc/version") added the linker version.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This omits system headers from the generated header dependency.
System headers are not updated unless you upgrade the compiler. Nor do
they contain CONFIG options, so fixdep does not need to parse them.
Having said that, the effect of this optimization will be quite small
because the kernel code generally does not include system headers
except <stdarg.h>. Host programs include a lot of system headers,
but there are not so many in the kernel tree.
At first, keeping system headers in .*.cmd files might be useful to
detect the compiler update, but there is no guarantee that <stdarg.h>
is included from every file. So, I implemented a more reliable way in
the previous commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The code block surrounded by 'if' ... 'endif' is reduced into if_stmt,
which is accepted in the 'choice' context. Therefore, you can write any
statements within a choice block by wrapping 'if y' ... 'end'.
For example, you can create a menu inside a choice, like follows:
---------------->8----------------
choice
prompt "choice"
config A
bool "A"
config B
bool "B"
if y
menu "strange menu"
config C
bool "C"
endmenu
endif
endchoice
---------------->8----------------
I want to change such a weird structure into a syntax error.
In fact, the USB gadget Kconfig had used nested 'choice' for no good
reason until commit df8df5e4bc37 ("usb: get rid of 'choice' for
legacy gadget drivers") killed it.
I think the 'source' inside 'choice' is on the fence. It is at least
gramatically sensible as long as the included file contains only
bool/tristate configs. However, it makes the code unreadable, and people
tend to forget the fact that the file is included from the choice
block. Commit 10e5e6c24963 ("usb: gadget: move choice ... endchoice to
legacy/Kconfig") got rid of the only usecase.
Going forward, you can only use 'config', 'comment', and 'if' inside
'choice'. This also recursively applies to 'if' blocks inside 'choice'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Nesting choice statements does not make any sense.
Commit df8df5e4bc37 ("usb: get rid of 'choice' for legacy gadget
drivers") got rid of the only usecase.
I will turn it into a syntax error. Remove the test in advance.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
I am not a big fan of doing assignment in a return statement.
Split it into two lines.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The simple assignment is enough because memset() three lines above
has zero-cleared the structure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
ENOTSUPP often feels like the right error code to use, but it's
in fact not a standard Unix error. E.g.:
$ python
>>> import errno
>>> errno.errorcode[errno.ENOTSUPP]
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
AttributeError: module 'errno' has no attribute 'ENOTSUPP'
There were numerous commits converting the uses back to EOPNOTSUPP
but in some cases we are stuck with the high error code for backward
compatibility reasons.
Let's try prevent more ENOTSUPPs from getting into the kernel.
Recent example:
https://lore.kernel.org/netdev/20200510182252.GA411829@lunn.ch/
v3 (Joe):
- fix the "not file" condition.
v2 (Joe):
- add a link to recent discussion,
- don't match when scanning files, not patches to avoid sudden
influx of conversion patches.
https://lore.kernel.org/netdev/20200511165319.2251678-1-kuba@kernel.org/
v1:
https://lore.kernel.org/netdev/20200510185148.2230767-1-kuba@kernel.org/
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Minor improvements to the documentation for BPF helpers:
* Fix formatting for the description of "bpf_socket" for
bpf_getsockopt() and bpf_setsockopt(), thus suppressing two warnings
from rst2man about "Unexpected indentation".
* Fix formatting for return values for bpf_sk_assign() and seq_file
helpers.
* Fix and harmonise formatting, in particular for function/struct names.
* Remove blank lines before "Return:" sections.
* Replace tabs found in the middle of text lines.
* Fix typos.
* Add a note to the footer (in Python script) about "bpftool feature
probe", including for listing features available to unprivileged
users, and add a reference to bpftool man page.
Thanks to Florian for reporting two typos (duplicated words).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200511161536.29853-4-quentin@isovalent.com
|
