| Age | Commit message (Collapse) | Author |
|---|
|
SND_SOC_TAS2781_FMWLIB
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250429111055.567-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the Kconfig dependency on ACPI || COMPILE_TEST to only depend on
ACPI.
The alternate dependency on COMPILE_TEST was a fudge to enable building
KUnit tests for modules that are selected by the CS35L56 driver but don't
depend on ACPI. This was based on a misunderstanding that KUNIT_ALL_TESTS
meant "all tests". Actually KUNIT_ALL_TESTS only means "tests for modules
that have satisfied dependencies" so it shouldn't be overriding
dependencies.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250428094126.125781-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A few ASUS models use the ALC256_FIXUP_ASUS_HEADSET_MODE although they
have no built-in mic pin on NID 0x13, as found in the commit
c1732ede5e80 ("ALSA: hda/realtek - Fix headset and mic on several Asus
laptops with ALC256"). This was relatively harmless in the past as
NID 0x13 was assigned as the secondary mic. But since the fix for the
pin sort order, this pin became the primary one, hence user started
noticing the broken input, and we've fixed already for a few ASUS
models to switch to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.
This patch corrects the other ASUS models to use the right quirk entry
for fixing the built-in mic regression. Here we cover X541SA
(1043:12e0), X541UV (1043:12f0), Z550SA (1043:13bf0) and X555UB
(1043:1ccd).
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220058
Link: https://patch.msgid.link/20250430053210.31776-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP Spectre x360 15-df1xxx with SSID 13c:863e requires similar
workarounds that were applied to another HP Spectre x360 models;
it has a mute LED only, no micmute LEDs, and needs the speaker GPIO
seup.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220054
Link: https://patch.msgid.link/20250427081035.11567-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This hardware has ALC274 codec with speaker NID 0x17 and line out
NID 0x16 for audio output. The line out is routed correctly but
the speaker is not. Thus the volume can't be controlled.
This patch removes DAC NID 0x06 (without volume control) from the
connection list for speaker NID 0x17. Routing both speaker and line
out pins to DAC NID 0x02 which controls the output volume.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250425103618.534951-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Delete the hda_cs_dsp module and move the one array and one function
that is used by the cs35l41_hda driver into that driver.
The cs35l41 and cs35l56 drivers stopped creating ALSA controls to
wrap firmware controls. The reasons are explained in:
commit 312c04cee408 ("ALSA: hda: cs35l41: Stop creating ALSA Controls
for firmware coefficients")
and
commit 34e1b1bb7324 ("ALSA: hda: cs35l56: Stop creating ALSA controls
for firmware coefficients")
The cs35l56_hda driver now doesn't use hda_cs_dsp_ctl at all. The
cs35l41_hda driver only uses the small array of firmware names and the
function to read a control value. All other functions and data in
hda_cs_dsp_ctl are unused. There is no need to keep a separate module
for such a small amount of data and code that is only used by one driver,
so remove the whole module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250424181214.66759-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add newer Zhaoxin HD Audio PCI IDs, and HDMI codec vendor IDs.
Because Zhaoxin hardware limitation, set BDL position to 128 to
increase interrupt interval.
To fix response write request not synced to memory when handle
HDAC interrupt, set bus->polling_mode = 1.
Signed-off-by: Joanne Bao <JoanneBao@glenfly.com>
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Link: https://patch.msgid.link/20250423102851.57997-1-TonyWWang-oc@zhaoxin.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The speaker doesn't mute when plugged headphone.
This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table.
After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX.
The speaker can mute when headphone was plugged.
Fixes: aa8e3ef4fe53 ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
driver
Move the common macro definition of kcontrols into a common header for code
cleanup, and create a common header to store the common declaration for
both spi and i2c hda driver.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250416051838.2001-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace the old direct use of platform_device APIs with newer KUnit APIs
and the faux bus.
The dummy codec driver device doesn't need to be a platform device.
It can be a faux bus device.
The dummy GPIO driver still must be a platform_device so that a
software_node can be added to it before it probes. But use the new
KUnit-managed APIs to create the platform_device and platform_driver.
These will cleanup automatically when a test completes or fails.
Also use KUnit resource cleanup to destroy the faux bus driver and the GPIO
software node instead of doing this "manually" in test exit() functions.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415105414.471039-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250408-gpiochip-set-rv-sound-v1-12-dd54b6ca1ef9@linaro.org
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASUS platform Headset Mic was disable by default.
Assigned verb table for Mic pin will enable it.
Fixes: 7ab61d0a9a35 ("ALSA: hda/realtek: Add support for ASUS B3405 and B3605 Laptops using CS35L41 HDA")
Fixes: c86dd79a7c33 ("ALSA: hda/realtek: Add support for ASUS B5405 and B5605 Laptops using CS35L41 HDA")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/0fe3421a6850461fb0b7012cb28ef71d@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Depend on SND_HDA_CIRRUS_SCODEC and GPIOLIB instead of selecting them.
KUNIT_ALL_TESTS should only build tests that have satisfied dependencies
and test components that are already being built. It must not cause
other stuff to be added to the build.
Fixes: 2144833e7b41 ("ALSA: hda: cirrus_scodec: Add KUnit test")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250409114520.914079-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250404121911.85277-9-phasta@kernel.org
|
|
release_firmware() checks for NULL pointers internally.
Remove unneeded NULL check for fmw here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250407061939.2771803-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is another VivoBook model which built-in mic got broken recently
by the fix of the pin sort. Apply the correct quirk
ALC256_FIXUP_ASUS_MIC_NO_PRESENCE to this model for addressing the
regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Closes: https://lore.kernel.org/Z95s5T6OXFPjRnKf@eldamar.lan
Link: https://patch.msgid.link/20250402074208.7347-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch was integrated CS Amp and support mute led function for HP platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/2c960ab58b4d4090ad4ee075f8cfdffd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds the HP OMEN 16 Laptop xd000xx to enable mute led.
it uses ALC245_FIXUP_HP_MUTE_LED_COEFBIT with a slight modification
setting mute_led_coef.off to 0(it was set to 4 i guess
in that function) which i referred to your previous patch disscusion
https://bugzilla.kernel.org/show_bug.cgi?id=214735 .
i am not sure whether i can modify the current working function so i
added another version calling
ALC245_FIXUP_HP_MUTE_LED_V1_COEFBIT. and both works for me.
Tested on 6.13.4-arch1-1 to 6.14.0-arch1-1
Signed-off-by: Sharan Kumar M <sharweshraajan@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250329154105.7618-2-sharweshraajan@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Beta dsp firmware
Since 2025, the firmware for tas2781 has been added more audio acoustic
features, such as non-linear compensation, advanced battery guard,
rattle-noise suppression, etc. The version was divided into two different
series. Both series have a slight change on the calibrated data storage
addresses, which becames flexible instead of fixed. In order to support
new firwmares in time, the code have some related upgrades.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250328074326.796-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS VivoBook X515JA with PCI SSID 1043:14f2 also hits the same issue
as other VivoBook model about the mic pin assignment, and the same
workaround is required to apply ALC256_FIXUP_ASUS_MIC_NO_PRESENCE
quirk.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219902
Link: https://patch.msgid.link/20250326152205.26733-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
release_firmware() checks for NULL pointers internally.
Remove unneeded NULL check for fmw here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250325084939.801117-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
release_firmware() checks for NULL pointers internally.
Remove unneeded NULL check for fmw here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250325084639.801054-1-nichen@iscas.ac.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch applies the ALC294 bass speaker fixup (ALC294_FIXUP_BASS_SPEAKER_15),
previously introduced in commit a7df7f909cec ("ALSA: hda: improve bass
speaker support for ASUS Zenbook UM5606WA"), to the ASUS Zenbook UM5606KA.
This hardware configuration matches ASUS Zenbook UM5606WA, where DAC NID
0x06 was removed from the bass speaker (NID 0x15), routing both speaker
pins to DAC NID 0x03.
This resolves the bass speaker routing issue, ensuring correct audio
output on ASUS UM5606KA.
Signed-off-by: Andres Traumann <andres.traumann.01@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250325102535.8172-1-andres.traumann.01@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS VivoBook X515UA with PCI SSID 1043:106f had a default quirk
pickup via pin table that applies ALC256_FIXUP_ASUS_MIC, but this adds
a bogus built-in mic pin 0x13 enabled. This was no big problem
because the pin 0x13 was assigned as the secondary mic, but the recent
fix made the entries sorted, hence this bogus pin appeared now as the
primary input and it broke.
For fixing the bug, put the right quirk entry for this device pointing
to ALC256_FIXUP_ASUS_MIC_NO_PRESENCE.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219897
Link: https://patch.msgid.link/20250324153233.21195-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.15
This is a very big release due to a combination of some big new work,
mainly new drivers and generic SoundWire support, and some wide ranging
cleanup work that made small changes to a lot of drivers.
- Morimoto-san has completed the conversion to use modern terminology
for the clocking configuration, and several other cleanups with
narrower impact.
- All the power management operation configuration was updated to use
current idioms by Takashi Iwai.
- Clarification of the control operations from Charles Keepax.
- Prepartory work for more generic SoundWire SCDA controls from Charles
Keepax.
- Support for AMD ACP 7.x, AWINC WM88166, Everest ES8388, Intel AVS
PEAKVOL and GAIN DSP modules Mediatek MT8188 DMIC, NXP i.MX95, nVidia
Tegra interconnects, Rockchip RK3588 S/PDIF, Texas Instruments
SN012776 and TAS5770L, and Wolfson WM8904 DMICs,
Some changes from the tip tree adding APIs needed by the AMD code are
included, these were unfortunately rebased in the tip tree after being
pulled in. There's also some regmap changes supporting the SCDA work
and some devres refactoring that was pulled in to support other changes.
|
|
Get ready for 6.15 merge window
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add support for HP Cadet, Clipper OmniBook, Turbine OmniBook, Trekker,
Enstrom Onmibook, Piston Omnibook
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250321231717.1232792-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
More HP EliteBook with Realtek HDA codec ALC3247 with combined CS35L56
Amplifiers need quirk ALC236_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-2-chris.chiu@canonical.com
|
|
More HP laptops with Realtek HDA codec ALC3315 with combined CS35L56
Amplifiers need quirk ALC285_FIXUP_HP_GPIO_LED to fix the micmute LED.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250321104914.544233-1-chris.chiu@canonical.com
|
|
Merge series from Francesco Dolcini <francesco@dolcini.it>:
This patch series adds DMIC and DRC support to the WM8904 driver, a new
of_ helper is added to simplify the driver code.
DRC functionality is added in the same patch series to provide the
necessary dynamic range control to make DMIC support useful.
The WM8904 supports digital microphones on two of its inputs:
IN1L/DMICDAT1 and IN1R/DMICDAT2. These two inputs can either be
connected to an ADC or to the DMIC system. There is an ADC for each
line, and only one DMIC block. This DMIC block is either connected to
DMICDAT1 or to DMICDAT2. One DMIC data line supports two digital
microphones via time multiplexing.
The pin's functionality is decided during hardware design (IN1L vs
DMICDAT1 and IN1R vs DMICDAT2). This is reflected in the Device Tree.
If one line is analog and one is DMIC, we need to be able to switch
between ADC and DMIC at runtime. The DMIC source is known from the
Device Tree. If both are DMIC inputs, we need to be able to switch the
DMIC source. There is no need to switch between ADC and DMIC at runtime.
Therefore, kcontrols are dynamically added by the driver depending on
its Device Tree configuration.
This is a heavy rework of a previous patch series provided by Alifer
Moraes and Pierluigi Passaro,
https://lore.kernel.org/lkml/20220307141041.27538-1-alifer.m@variscite.com.
|
|
The only difference between snd_soc_info_volsw() and
snd_soc_info_volsw_range() is that the later will not force a 2
value control to be of type integer if the name ends in "Volume".
The kernel currently contains no users of snd_soc_info_volsw_range()
that would return a boolean control with this code, so the risk is
quite low and it seems appropriate that it should contain volume
control detection. So remove snd_soc_info_volsw_range() and point its
users at snd_soc_info_volsw().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250318171459.3203730-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For calibration, basic version does not contain any calibration addresses,
it depends on calibration tool to convey the addresses to the driver.
Since Alpha and Beta firmware, all the calibration addresses are saved
into the firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
|
|
Back-merge of 6.14 devel branch for further developments of TAS
codecsBack-merge of 6.14 devel branch for further developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute LED on this HP laptop uses ALC236 and requires a quirk to function.
This patch enables the existing quirk for the device.
Tested on my laptop and the LED behaviour works as intended.
Cc: stable@vger.kernel.org
Signed-off-by: Dhruv Deshpande <dhrv.d@proton.me>
Link: https://patch.msgid.link/20250317085621.45056-1-dhrv.d@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The workaround for Dell machines to skip the pin-shutup for mic pins
introduced alc_headset_mic_no_shutup() that is replaced from the
generic snd_hda_shutup_pins() for certain codecs. The problem is that
the call is done unconditionally even if spec->no_shutup_pins is set.
This seems causing problems on other platforms like Lenovo.
This patch corrects the behavior and the driver honors always
spec->no_shutup_pins flag and skips alc_headset_mic_no_shutup() if
it's set.
Fixes: dad3197da7a3 ("ALSA: hda/realtek - Fixup headphone noise via runtime suspend")
Reported-and-tested-by: Oleg Gorobets <oleg.goro@gmail.com>
Link: https://patch.msgid.link/20250315143020.27184-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros
instead of SET_SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-7-tiwai@suse.de
|
|
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS()
together with pm_ptr(), which allows us dropping ugly __maybe_unused
attributes.
This optimizes slightly when CONFIG_PM is disabled, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-6-tiwai@suse.de
|
|
Clean up the code with the helper macros, and also assure that no PM
ops is assigned without CONFIG_PM via pm_ptr().
Merely a cleanup, there should be no actual code change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250313170731.26943-5-tiwai@suse.de
|
|
Add a fixup to enable the mute LED on HP Pavilion x360 Convertible
14-dy1xxx with ALC295 codec. The appropriate coefficient index and bits
were identified through a brute-force method, as detailed in
https://bbs.archlinux.org/viewtopic.php?pid=2079504#p2079504.
Signed-off-by: Navon John Lukose <navonjohnlukose@gmail.com>
Link: https://patch.msgid.link/20250307213319.35507-1-navonjohnlukose@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge branch 'for-6.14' of
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into
asoc-6.15 to avoid a bunch of add/add conflicts.
|
|
CS35L41 HDA
Laptop uses 2 CS35L41 Amps with HDA, using External boost with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-8-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B5605CCA and B5405CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-7-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS B3405CCA / P3405CCA, B3605CCA / P3605CCA,
B3405CCA, B3605CCA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-6-sbinding@opensource.cirrus.com
|
|
Add support for ASUS B3405CVA, B5405CVA, B5605CVA, B3605CVA.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with SPI
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-5-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G614PH/PM/PP and G614FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-4-sbinding@opensource.cirrus.com
|
|
CS35L41 HDA
Add support for ASUS GA603KP, GA603KM and GA603KH.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-3-sbinding@opensource.cirrus.com
|
|
Add support for ASUS G814PH/PM/PP and G814FH/FM/FP.
Laptops use 2 CS35L41 Amps with HDA, using Internal boost, with I2C.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250305170714.755794-2-sbinding@opensource.cirrus.com
|
|
Dell XPS 13 7390 with the Realtek ALC3271 codec experiences
persistent humming noise when the power_save mode is enabled.
This issue occurs when the codec enters power saving mode,
leading to unwanted noise from the speakers.
This patch adds the affected model (PCI ID 0x1028:0x0962) to the
power_save denylist to ensure power_save is disabled by default,
preventing power-off related noise issues.
Steps to Reproduce
1. Boot the system with `snd_hda_intel` loaded.
2. Verify that `power_save` mode is enabled:
```sh
cat /sys/module/snd_hda_intel/parameters/power_save
````
output: 10 (default power save timeout)
3. Wait for the power save timeout
4. Observe a persistent humming noise from the speakers
5. Disable `power_save` manually:
```sh
echo 0 | sudo tee /sys/module/snd_hda_intel/parameters/power_save
````
6. Confirm that the noise disappears immediately.
This issue has been observed on my system, and this patch
successfully eliminates the unwanted noise. If other users
experience similar issues, additional reports would be helpful.
Signed-off-by: Hoku Ishibe <me@hokuishi.be>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250224020517.51035-1-me@hokuishi.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add ALC222 its own depop functions for alc_init and alc_shutup.
[note: this fixes pop noise issues on the models with two headphone
jacks -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
