summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2025-03-20Tidy up ASoC control get and put handlersMark Brown
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>: There is a lot of duplicated and occasionally slightly incorrect code around the ASoC control get and put handlers. This series add some kunit tests and then refactors the code to get all the tests passing and reduce some of the duplication. The focus here is on the volsw handlers, future work could still be done on some of the others but these were the ones that most required attention. Hopefully the only slightly controversal change is the very last patch which changes platform_max to be applied after the control type is determined, more discussion in the commit message for that one.
2025-03-20ASoC: wm8904: add DMIC supportErnest Van Hoecke
The WM8904 codec supports both ADC and DMIC inputs. Get input pin functionality from the platform data and add the necessary controls depending on the possible additional routing. The ADC and DMIC share the IN1L/DMICDAT1 and IN1R/DMICDAT2 pins. This leads to a few scenarios requiring different DAPM routing: - When both are connected to an analog input, only the ADC is used. - When one line is a DMIC and the other an analog input, the DMIC source is set from the platform data and a mux is added to select whether to use the ADC or DMIC. - When both are connected to a DMIC, another mux is added to this to select the DMIC source. Note that we still need to be able to select the ADC system for use with the IN2L, IN2R, IN3L and IN3R pins. Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-6-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-20ASoC: wm8904: get platform data from DTErnest Van Hoecke
Read in optional codec-specific properties from the device tree. The platform_data structure is not populated when using device trees. This change parses optional dts properties to populate it. - wlf,in1l-as-dmicdat1 - wlf,in1r-as-dmicdat2 - wlf,gpio-cfg - wlf,micbias-cfg - wlf,drc-cfg-regs - wlf,drc-cfg-names - wlf,retune-mobile-cfg-regs - wlf,retune-mobile-cfg-names - wlf,retune-mobile-cfg-hz Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-5-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-20ASoC: wm8904: Don't touch GPIO configs set to 0xFFFFErnest Van Hoecke
When updating the GPIO registers, do nothing for all fields of gpio_cfg that are "0xFFFF". This "do nothing" flag used to be 0 to easily check whether the gpio_cfg field was actually set inside pdata or left empty (default). However, 0 is a valid configuration for these registers, while 0xFFFF is not. With this change, users can explicitly set them to 0. Not setting gpio_cfg in the platform data will now lead to setting all GPIO registers to 0 instead of leaving them unset. No one is using this platform data with this codec. The change gets the driver ready to properly set gpio_cfg from the DT. Datasheet: https://statics.cirrus.com/pubs/proDatasheet/WM8904_Rev4.1.pdf Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250319142059.46692-3-francesco@dolcini.it Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19irqdomain: sound: Switch to irq_domain_create_linear()Jiri Slaby (SUSE)
irq_domain_add_linear() is going away as being obsolete now. Switch to the preferred irq_domain_create_linear(). That differs in the first parameter: It takes more generic struct fwnode_handle instead of struct device_node. Therefore, of_fwnode_handle() is added around the parameter. Note some of the users can likely use dev->fwnode directly instead of indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not guaranteed to be set for all, so this has to be investigated on case to case basis (by people who can actually test with the HW). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Prasad Kumpatla <quic_pkumpatl@quicinc.com> Cc: linux-sound@vger.kernel.org Link: https://patch.msgid.link/20250319092951.37667-36-jirislaby@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19ASoC: ops: Remove snd_soc_put_volsw_range()Charles Keepax
With the addition of the soc_mixer_ctl_to_reg() helper it is now very clear that the only difference between snd_soc_put_volsw() and snd_soc_put_volsw_range() is that the former supports double controls with both values in the same register. As such we can combine both functions. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250318171459.3203730-11-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19ASoC: ops: Remove snd_soc_get_volsw_range()Charles Keepax
With the addition of the soc_mixer_reg_to_ctl() helper it is now very clear that the only difference between snd_soc_get_volsw() and snd_soc_get_volsw_range() is that the former supports double controls with both values in the same register. As such we can combine both functions. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250318171459.3203730-10-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-19ASoC: tas2781: Support dsp firmware Alpha and Beta seaiesShenghao Ding
For calibration, basic version does not contain any calibration addresses, it depends on calibration tool to convey the addresses to the driver. Since Alpha and Beta firmware, all the calibration addresses are saved into the firmware. Signed-off-by: Shenghao Ding <shenghao-ding@ti.com> Reviewed-by: Mark Brown <broonie@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250313093238.1184-1-shenghao-ding@ti.com
2025-03-19Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge of 6.14 devel branch for further developments of TAS codecsBack-merge of 6.14 devel branch for further developments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-03-18ASoC: codecs: Add aw88166 amplifier driverMark Brown
Merge series from wangweidong.a@awinic.com: Add the awinic,aw88166 property to support the aw88166 chip. The driver is for amplifiers aw88166 of Awinic Technology Corporation. The AW88166 is a high efficiency digital Smart K audio amplifier
2025-03-18ASoC: codecs: ntp8918: Remove duplicate clk.h headerChen Ni
Remove duplicate header which is included twice. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://patch.msgid.link/20250318081043.2870229-1-nichen@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: Convert to modern PM macrosMark Brown
Merge series from Takashi Iwai <tiwai@suse.de>: This is a revised series of small and trivial patches to convert to the newer PM macros, e.g. from SET_RUNTIME_PM_OPS() to RUNTIME_PM_OPS(). The conversions are systematic, and we could reduce messy __maybe_unused and ifdefs with those changes. Merely code refactoring, and shouldn't change the actual driver behavior.
2025-03-17ASoC: Convert PCM codecs to GPIO descriptorsMark Brown
Merge series from Linus Walleij <linus.walleij@linaro.org>: Three remaining TI PCM codecs use the old GPIO API in different ways, fix them all up and move over to <linux/gpio/consumer.h> and get rid of <linux/gpio.h>.
2025-03-17Allow retrieving accessory detection reference onMark Brown
Merge series from "Nícolas F. R. A. Prado" <nfraprado@collabora.com>: This series enables the MT8188-MT6359 sound driver to retrieve the MT6359 ACCDET sound component from a mediatek,accdet DT property, which allows detecting jack insertion/removal. Patch 1 describes the new property in the binding. Patch 2 implements the sound component retrieval in the common MTK soundcard driver. Patch 4 updates the MT8188-MT6359 sound driver to register the audio jack and initialize the ACCDET driver for detection, if the property is present. Patch 3 adds a stub to prevent a linker failure in case the MT6359-ACCDET config is disabled. Tested on the Genio 700 EVK board.
2025-03-17ASoC: pcm3168a: Convert to EXPORT_GPL_DEV_PM_OPS()Takashi Iwai
Use the newer EXPORT_GPL_DEV_PM_OPS() macro together with pm_ptr(), which allows us to drop superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Shenghao Ding <shenghao-ding@ti.com> Cc: Kevin Lu <kevin-lu@ti.com> Cc: Baojun Xu <baojun.xu@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-89-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wsa884x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-58-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wsa883x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-57-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wsa881x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-56-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wm8994: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us superfluous CONFIG_PM_SLEEP ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-55-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wm8962: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-54-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wm8804: Convert to EXPORT_GPL_DEV_PM_OPS()Takashi Iwai
Use the newer EXPORT_GPL_DEV_PM_OPS() macro together with pm_ptr(), which allows us to drop superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-53-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wm5100: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-52-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wm2200: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes and superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: patches@opensource.cirrus.com Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20250317095603.20073-51-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wcd939x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-50-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wcd938x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-49-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: wcd937x: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-48-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: ts3a227e: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM_SLEEP ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-47-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: tas2552: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Shenghao Ding <shenghao-ding@ti.com> Cc: Kevin Lu <kevin-lu@ti.com> Cc: Baojun Xu <baojun.xu@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-46-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rtq9128: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS(), which allows us dropping ugly __maybe_unsed attributes. Merely a cleanup, there should be no actual code change. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-45-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt9120: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-44-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt722: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-43-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt721: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-42-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt715: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-41-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt712: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-40-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt711: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-39-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt700-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-38-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt5682-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-37-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt5645: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-36-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt5514: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-35-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt1320-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-34-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt1318-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-33-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt1316-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-32-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt1308-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-31-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: rt1017-sdca-sdw: Convert to RUNTIME_PM_OPS() & coTakashi Iwai
Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-30-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: pcm512x: Convert to EXPORT_GPL_DEV_PM_OPS()Takashi Iwai
Use the newer EXPORT_GPL_DEV_PM_OPS() macro together with pm_ptr(), which allows us to drop superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Cc: Shenghao Ding <shenghao-ding@ti.com> Cc: Kevin Lu <kevin-lu@ti.com> Cc: Baojun Xu <baojun.xu@ti.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-29-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: mt6660: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-28-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: max98927: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM_SLEEP ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-27-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: max9860: Convert to RUNTIME_PM_OPS()Takashi Iwai
Use the newer RUNTIME_PM_OPS() macro instead of SET_RUNTIME_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-26-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: max98520: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unsed attributes. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-25-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17ASoC: max98396: Convert to SYSTEM_SLEEP_PM_OPS()Takashi Iwai
Use the newer SYSTEM_SLEEP_PM_OPS() macro instead of SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping superfluous CONFIG_PM_SLEEP ifdefs. This optimizes slightly when CONFIG_PM is disabled, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-24-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-17 23:39:15 +0000