Age | Commit message (Collapse) | Author |
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Two fixes are leading the way - one addresses the incorrect DMA mask
assignment (typo) at driver probe. The other, fixes a potential buffer
overflow when copying data received from firmware to kernel buffer.
However unlikely, the fix should still be there.
Then a range of patches providing the support for:
- AML with rt286 (machine board)
- KBL-R for rt298 (codec)
- KBL-R with rt298 (machine board)
- APL/KBL with da7219 (machine board)
- Addition of all the missing SKL-based PCI ids to core.c
Of the remaining changes, only one stands out - special case is provided
for "unsupported" IPCs. The driver supports a range of platforms,
however, on some generations given IPC may not be supported. Such call
shall not be treated as "invalid" - those are two different scenarios.
Everything else in the patchset is mostly a readability improvement:
spelling fixes and log messages issues, code simplification.
|
|
Loop only till the actual number of AudioDSP cores, not the value of
mask made from said number.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Reword the parameter description to drop any confusion regarding its
purpose.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ENABLE_LOGS and SYSTEM_TIME IPCs call LARGE_CONFIG_SET internally which
dumps an error message in case of an error. There is no need to repeat
the process in the top level handler.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Utilize NOT_SUPPORTED status code to differentiate between unsupported
and invalid requests. Skip over error paths if it is the former that is
communicated by the base firmware.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While LOG_BUFFER_STATUS is a simple notification with only one
meaningful field, same message ptr shall not be reused for two different
handlers.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In some configurations board fails to compile due to missing header. Add
it to fix build.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No need to atomic_add_return(1) when there is atomic_inc_return()
available.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enable additional SKL-based configurations by filling device ID table
with new entries.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KBL and APL devices use same codec but have different clock, so it must
be set appropriately depending on device.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ACPI ID of INT343A signals rt286 device for SKL, KBL and AML platforms.
Add the missing AML entry.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KBL-R RVPs contain built-in rt298 codec which requires different PLL
clock and .dai_fmt configuration than seen on other boards.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If an event caused firmware to return invalid RX size for
LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes.
Fix by utilizing min_t().
Reported-by: CoolStar <coolstarorganization@gmail.com>
Fixes: f14a1c5a9f83 ("ASoC: Intel: avs: Add module management requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Spelling error leads to incorrect behavior when setting up DMA mask.
Fixes: a5bbbde2b81e ("ASoC: Intel: avs: Use helper function to set up DMA")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In order to load proper board configuration it needs to be looked up in
ACPI. Add board configuration for MAXIM 98927 codec present on
Chromebooks.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220930124538.354992-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-max98927 configuration add machine board connecting AVS
platform component driver with max98927 codec one.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220930124538.354992-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.1
This has been a very quiet release for the core but quite a busy one for
drivers with a big crop of new drivers and lots of feature additions and
fixes to existing ones:
- A new string helper parse_int_array_user().
- Improvements to the SOF IPC4 code, especially around trace.
- Support for AMD Rembrant DSPs, AMD Pink Sardine ACP 6.2, Apple Silcon
systems, Everest ES8326, Intel Sky Lake and Kaby Lake, MediaTek
MT8186 support, NXP i.MX8ULP DSPs, Qualcomm SC8280XP, SM8250 and SM8450
and Texas Instruments SRC4392
There is a conflict with the conversion of I2C remove functions to void
in the cs42l42 driver which is fairly straightforward to resolve but
should be highlighted to Linus.
|
|
Make sure there's no ambiguity on layering with the appropriate prefix
added.
Pure rename, no functionality changed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20220919121041.43463-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Almost all default rtd->xxx are setup at soc_new_pcm_runtime()
which is sub-function of snd_soc_add_pcm_runtime() (A).
But "rtd->pmdown_time" is setup at soc_init_pcm_runtime() (B).
It is very random timing setup. This patch setup it at (A),
same as other rtd->xxx.
static int snd_soc_bind_card(...)
{
...
for_each_card_prelinks(...) {
(A) ret = snd_soc_add_pcm_runtime(...);
...
}
...
for_each_card_rtds(...) {
(B) ret = soc_init_pcm_runtime(...);
...
}
...
}
One note is that current topology/intel are directly calling
snd_soc_add_pcm_runtime() (A) without calling soc_init_pcm_runtime() (B).
This means, its "rtd->pmdown_time settings" was 0, but will have default
value by this patch.
"rtd->pmdown_time settings" will be used at
snd_soc_runtime_ignore_pmdown_time(). This patch adds
"ignore_pmdown_time" to these driver to keep compatibility.
bool snd_soc_runtime_ignore_pmdown_time(...)
{
...
=> if (!rtd->pmdown_time || rtd->dai_link->ignore_pmdown_time)
return true;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875yhxmjjd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in a buffer
overflow (although it's unrealistic).
This patch replaces it with a safer version, scnprintf() for papering
over such a potential issue.
Fixes: f1b3b320bd65 ("ASoC: Intel: avs: Generic soc component driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220801165420.25978-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As reported by Nathan, when building avs driver using clang with:
CONFIG_COMPILE_TEST=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_KASAN=y
CONFIG_PCI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_INTEL_AVS=y
there are reports of too big stack use, like:
sound/soc/intel/avs/path.c:815:18: error: stack frame size (2176) exceeds limit (2048) in 'avs_path_create' [-Werror,-Wframe-larger-than]
struct avs_path *avs_path_create(struct avs_dev *adev, u32 dma_id,
^
1 error generated.
This is apparently caused by inlining many calls to guid_equal which
inlines fortified memcpy, using 2 size_t variables.
Instead of hardcoding many calls to guid_equal, use lookup table with
one call, this improves stack usage.
Link: https://lore.kernel.org/alsa-devel/YtlzY9aYdbS4Y3+l@dev-arch.thelio-3990X/T/
Link: https://github.com/ClangBuiltLinux/linux/issues/1642
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Build-tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220722111959.2588597-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To reduce the number of places to update if timeouts would have to
change, modify the constant declaration.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Module unloading operation performs memory unmapping and the weight of
the opration does not different from any other standard IPC. There is no
dependency on secondary task like in module loading scenario where
larger message timeout is recommended.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Improve readability of CLDMA reset operation by making use of
already defined SD_CTL_STREAM_RESET.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If exposed by firmware, count RESERVED parameter as known one to avoid
dumping noise in kernel logs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dma_set_mask() and dma_set_coherent_mask() can be performed with one
call to dma_set_mask_and_coherent(), which slightly reduces amount of
code on our side.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Apparently it is possible for code to allocate large buffers which may
cause warnings as reported in [1]. This was fixed for HDA, SOF and
skylake in patchset [2], fix it also for avs driver.
[1] https://github.com/thesofproject/linux/issues/3430
[2] https://lore.kernel.org/all/20220215132756.31236-1-tiwai@suse.de/
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To allow for driver's filesystem interfaces e.g.: debugfs, to be touched
even when the device is asleep, mark IPC-channel as blocked when the
device is suspended. This causes any invocation of said interfaces that
do not toggle PM themselves to gracefully fail with "Operation not
permitted" message.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some LARGE_CONFIG_GETs are never expected to return payload of size 0.
Check for such situation and collapse if met.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to copy number of bytes specified by IPC message caller
if DSP firmware returned lower number. In consequence, LARGE_CONFIG_GET
handler is simplified.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To avoid any false positives when checking CPA after setting SPA, do a
short wait. For stall operation, give HW more time to propagate the
change before moving on.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For formatted port - ssp%d - descriptions to have an effect, copier
module templates need to be updated with specified port value. This
value is later propagated to the firmware when module instances are
being instantiated.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With ASoC representation of HDAudio codec added, update bus initiazation
to complete it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update printf formatting as 'ssp_port' argument is of type 'int', not
'long int'.
Fixes: e39acc4cfd92 ("ASoC: Intel: avs: Add I2S-test machine board")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706062952.251704-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit e39acc4cfd92 ("ASoC: Intel: avs: Add I2S-test machine board") adds
the config "SND_SOC_INTEL_AVS_MACH_I2S_TEST", but in the Makefile refers
to config "SND_SOC_INTEL_AVS_MACH_i2s_TEST" (notice the uppercase and
lowercase difference).
Adjust the Makefile to refer to the actual existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220705103238.7484-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC core has now been changed to default to the non-legacy DAI
naming, as such drivers using the new scheme no longer need to specify
the non_legacy_dai_naming flag.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220623125250.2355471-82-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Required for more changes for the ops.
|
|
Use correct type for parsing UUIDs, this eliminates warning present,
when compiling with W=1.
Fixes: 34ae2cd53673 ("ASoC: Intel: avs: Add topology parsing infrastructure")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220610124257.4160658-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-da7219 configuration add machine board connecting AVS
platform component driver with da7219 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-max98373 configuration add machine board connecting AVS
platform component driver with max98373 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-max98357a configuration add machine board connecting AVS
platform component driver with max98357a codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-ssm4567 configuration add machine board connecting AVS
platform component driver with ssm4567 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-nau8825 configuration add machine board connecting AVS
platform component driver with nau8825 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-rt5682 configuration add machine board connecting AVS
platform component driver with rt5682 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-rt298 configuration add machine board connecting AVS
platform component driver with rt298 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-rt286 configuration add machine board connecting AVS
platform component driver with rt286 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support AVS-rt274 configuration add machine board connecting AVS
platform component driver with rt274 codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Allow for testing audio streaming over I2S interface through SSP
loopback. No actual codec is needed here as board is intended for SSP
loopback scenarios only. One playback and one capture endpoint is
exposed per SSP port.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support AVS-DMIC configuration by implementing board connecting AVS
platform component with DMIC codec one.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Connect AVS driver with ASoC HDAudio codec with help of this machine
board. Similarly to its platform and codec components, DAI links and
routes are being created dynamically so single board can be used across
all HDAudio codec types.
Card makes use of "binder" BE DAI Link so HDAudio codec driver can be
listed as one of its components. This allows for BE DAIs to be created
dynamically, based on HDAudio codec capabilities.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|