summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-08perf vendor events amd: Add Zen3 eventsSmita Koralahalli
Add PMU events for AMD Zen3 processors as documented in the AMD Processor Programming Reference for Family 19h and Model 01h [1]. Below are the events which are new on Zen3: PMCx041 ls_mab_alloc.{all_allocations|hardware_prefetcher_allocations|load_store_allocations} PMCx043 ls_dmnd_fills_from_sys.ext_cache_local PMCx044 ls_any_fills_from_sys.{mem_io_remote|ext_cache_remote|mem_io_local|ext_cache_local|int_cache|lcl_l2} PMCx047 ls_misal_loads.{ma4k|ma64} PMCx059 ls_sw_pf_dc_fills.ext_cache_local PMCx05a ls_hw_pf_dc_fills.ext_cache_local PMCx05f ls_alloc_mab_count PMCx085 bp_l1_tlb_miss_l2_tlb_miss.coalesced_4k PMCx0ab de_dis_cops_from_decoder.disp_op_type.{any_integer_dispatch|any_fp_dispatch} PMCx0cc ex_ret_ind_brch_instr PMCx18e ic_tag_hit_miss.{all_instruction_cache_accesses|instruction_cache_miss|instruction_cache_hit} PMCx1c7 ex_ret_msprd_brnch_instr_dir_msmtch PMCx28f op_cache_hit_miss.{all_op_cache_accesses|op_cache_miss|op_cache_hit} Section 2.1.17.2 "Performance Measurement" of "PPR for AMD Family 19h, Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021." lists new metrics. Add them. Preserve the events for Zen3 if they are measurable and non-zero as taken from Zen2 directory even if the PPR of Zen3 [1] omits them. Those events are the following: PMCx000 fpu_pipe_assignment.{total|total0|total1|total2|total3} PMCx004 fp_num_mov_elim_scal_op.{optimized|opt_potential|sse_mov_ops_elim|sse_mov_ops} PMCx02D ls_rdtsc PMCx040 ls_dc_accesses PMCx046 ls_tablewalker.{iside|ic_type1|ic_type0|dside|dc_type1|dc_type0} PMCx061 l2_request_g2.{group1|ls_rd_sized|ls_rd_sized_nc|ic_rd_sized|ic_rd_sized_nc|smc_inval|bus_lock_originator|bus_locks_responses} PMCx062 l2_latency.l2_cycles_waiting_on_fills PMCx063 l2_wcb_req.{wcb_write|wcb_close|zero_byte_store|cl_zero} PMCx06d l2_fill_pending.l2_fill_busy PMCx080 ic_fw32 PMCx081 ic_fw32_miss PMCx086 bp_snp_re_sync PMCx087 ic_fetch_stall.{ic_stall_any|ic_stall_dq_empty|ic_stall_back_pressure} PMCx08a bp_l1_btb_correct PMCx08c ic_cache_inval.{l2_invalidating_probe|fill_invalidated} PMCx099 bp_tlb_rel PMCx0a9 de_dis_uop_queue_empty_di0 PMCx0c7 ex_ret_brn_resync PMCx28a ic_oc_mode_switch.{oc_ic_mode_switch|ic_oc_mode_switch} L3PMCx01 l3_request_g1.caching_l3_cache_accesses L3PMCx06 l3_comb_clstr_state.{other_l3_miss_typs|request_miss} [1] Processor Programming Reference (PPR) for AMD Family 19h, Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021. [2] Processor Programming Reference (PPR) for AMD Family 17h Model 71h, Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019. [3] Processor Programming Reference (PPR) for AMD Family 17h Models 01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019. All of the PPRs can be found at: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20210406215944.113332-5-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events amd: Use 0x%02x format for event code and umaskSmita Koralahalli
Use 0x%02x format for all event codes and umasks as this helps in tracking changes of automatically generated event tables. Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20210406215944.113332-4-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events amd: Use lowercases for all the eventcodes and umasksSmita Koralahalli
The values of event codes and umasks are inconsistent with letter cases. Enforce a unique style and default everything to lower case as this helps in tracking changes of automatically generated event tables. Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20210406215944.113332-3-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events amd: Fix broken L2 Cache Hits from L2 HWPF metricSmita Koralahalli
Commit 08ed77e414ab2342 ("perf vendor events amd: Add recommended events") added the hits event "L2 Cache Hits from L2 HWPF" with the same metric expression as the accesses event "L2 Cache Accesses from L2 HWPF": $ perf list --details ... l2_cache_accesses_from_l2_hwpf [L2 Cache Accesses from L2 HWPF] [l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3] l2_cache_hits_from_l2_hwpf [L2 Cache Hits from L2 HWPF] [l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3] ... This was wrong and led to counting hits the same as accesses. Section 2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with EventCode 0x70 which is the same as l2_pf_hit_l2. Fix this, and massage the description for l2_pf_hit_l2 as the hits event is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended event over other events if the duplicate exists and maintain both for consistency. Hence, l2_cache_hits_from_l2_hwpf should override l2_pf_hit_l2. Before: # perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1 Performance counter stats for 'sleep 1': 1,436 l2_pf_miss_l2_l3 # 11114.00 l2_cache_accesses_from_l2_hwpf # 11114.00 l2_cache_hits_from_l2_hwpf 4,482 l2_pf_hit_l2 5,196 l2_pf_miss_l2_hit_l3 1.001765339 seconds time elapsed After: # perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1 Performance counter stats for 'sleep 1': 1,477 l2_pf_miss_l2_l3 # 10442.00 l2_cache_accesses_from_l2_hwpf 3,978 l2_pf_hit_l2 4,987 l2_pf_miss_l2_hit_l3 1.001491186 seconds time elapsed # perf stat -e l2_cache_hits_from_l2_hwpf sleep 1 Performance counter stats for 'sleep 1': 3,983 l2_cache_hits_from_l2_hwpf 1.001329970 seconds time elapsed Note the difference in performance counter values for the accesses versus the hits after the fix, and the hits event now counting the same as l2_pf_hit_l2. Fixes: 08ed77e414ab ("perf vendor events amd: Add recommended events") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537 Reviewed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Liška <mliska@suse.cz> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vijay Thakkar <vijaythakkar@me.com> Cc: linux-perf-users@vger.kernel.org Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events arm64: Add Hisi hip08 L3 metricsJohn Garry
Add L3 metrics. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1617791570-165223-7-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events arm64: Add Hisi hip08 L2 metricsJohn Garry
Add L2 metrics. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1617791570-165223-6-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf vendor events arm64: Add Hisi hip08 L1 metricsJohn Garry
Add L1 metrics. Formula is as consistent as possible with MAN pages description for these metrics. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1617791570-165223-5-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf pmu: Add pmu_events_map__find() function to find the common PMU map for ↵John Garry
the system Add a function to find the common PMU map for the system. For arm64, a special variant is added. This is because arm64 supports heterogeneous CPU systems. As such, it cannot be guaranteed that the cpumap is same for all CPUs. So in case of heterogeneous systems, don't return a cpumap. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf test: Handle metric reuse in pmu-events parsing testJohn Garry
The pmu-events parsing test does not handle metric reuse at all. Introduce some simple handling to resolve metrics who reference other metrics. Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/1617791570-165223-3-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-08perf metricgroup: Make find_metric() public with name changeJohn Garry
Function find_metric() is required for the metric processing in the pmu-events testcase, so make it public. Also change the name to include "metricgroup". Tested-by: Paul A. Clarke <pc@us.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-07perf arm-spe: Avoid potential buffer overrunIan Rogers
SPE extended headers are > 1 byte so ensure the buffer contains at least this before reading. This issue was detected by fuzzing. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Dave Martin <dave.martin@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-07perf report: Fix wrong LBR block sortingJin Yao
When '--total-cycles' is specified, it supports sorting for all blocks by 'Sampled Cycles%'. This is useful to concentrate on the globally hottest blocks. 'Sampled Cycles%' - block sampled cycles aggregation / total sampled cycles But in current code, it doesn't use the cycles aggregation. Part of 'cycles' counting is possibly dropped for some overlap jumps. But for identifying the hot block, we always need the full cycles. # perf record -b ./triad_loop # perf report --total-cycles --stdio Before: # # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... ............................................................. ................. # 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so ... 0.00% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop The hottest block '[triad_loop.c:64 -> triad_loop.c:65]' is not at the top of output. After: # Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range] Shared Object # ............... .............. ........... .......... .............................................................. ................. # 94.35% 92.7K 0.02% 4 [triad_loop.c:64 -> triad_loop.c:65] triad_loop 0.81% 793 4.32% 793 [setup-vdso.h:34 -> setup-vdso.h:40] ld-2.27.so 0.49% 480 0.87% 160 [native_write_msr+0 -> native_write_msr+16] [kernel.kallsyms] 0.48% 476 0.52% 95 [native_read_msr+0 -> native_read_msr+29] [kernel.kallsyms] 0.31% 303 1.65% 303 [nmi_restore+0 -> nmi_restore+37] [kernel.kallsyms] 0.26% 255 1.39% 255 [nohz_balance_exit_idle+75 -> nohz_balance_exit_idle+162] [kernel.kallsyms] 0.24% 234 1.28% 234 [end_repeat_nmi+67 -> end_repeat_nmi+83] [kernel.kallsyms] 0.23% 227 1.24% 227 [__irqentry_text_end+96 -> __irqentry_text_end+126] [kernel.kallsyms] 0.20% 194 1.06% 194 [native_set_debugreg+52 -> native_set_debugreg+56] [kernel.kallsyms] 0.11% 106 0.14% 26 [native_sched_clock+0 -> native_sched_clock+98] [kernel.kallsyms] 0.10% 97 0.53% 97 [trigger_load_balance+0 -> trigger_load_balance+67] [kernel.kallsyms] 0.09% 85 0.46% 85 [get-dynamic-info.h:102 -> get-dynamic-info.h:111] ld-2.27.so 0.08% 82 0.06% 11 [intel_pmu_drain_pebs_nhm+580 -> intel_pmu_drain_pebs_nhm+627] [kernel.kallsyms] 0.08% 77 0.42% 77 [lru_add_drain_cpu+0 -> lru_add_drain_cpu+133] [kernel.kallsyms] 0.08% 74 0.10% 18 [handle_pmi_common+271 -> handle_pmi_common+310] [kernel.kallsyms] 0.08% 74 0.40% 74 [get-dynamic-info.h:131 -> get-dynamic-info.h:157] ld-2.27.so 0.07% 69 0.09% 17 [intel_pmu_drain_pebs_nhm+432 -> intel_pmu_drain_pebs_nhm+468] [kernel.kallsyms] Now the hottest block is reported at the top of output. Fixes: b65a7d372b1a55db ("perf hist: Support block formats with compare/sort/display") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210407024452.29988-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-06perf mem-events: Remove unnecessary 'struct mem_info' forward declarationWan Jiabing
'struct mem_info' is defined at 22nd line. The declaration here is unnecessary. Remove it. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-05perf inject: Fix repipe usageAdrian Hunter
Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from file") 'perf inject' has started printing "PERFILE2h" when not processing pipes. The commit exposed perf to the possiblity that the input is not a pipe but the 'repipe' parameter gets used. That causes the printing because perf inject sets 'repipe' to true always. The 'repipe' parameter of perf_session__new() is used by 2 functions: - perf_file_header__read_pipe() - trace_report() In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is true. Fix by setting 'repipe' to true only if the output is a pipe. Fixes: e558a5bd8b74aff4 ("perf inject: Work with files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Andrew Vagin <avagin@openvz.org> Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-02perf evsel: Remove duplicate 'struct target' forward declarationWan Jiabing
'struct target' is declared twice. One has been declared at 21st line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210401062424.991737-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-02Merge tag 'v5.12-rc5' into WIP.x86/core, to pick up recent NOP related changesIngo Molnar
In particular we want to have this upstream commit: b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG") ... before merging in x86/cpu changes and the removal of the NOP optimizations, and applying PeterZ's !retpoline objtool series. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-31perf annotate: Add --demangle and --demangle-kernelMartin Liška
'perf annotate' supports --symbol but it's impossible to filter a C++ symbol. With --no-demangle one can filter easily by mangled function name. Signed-off-by: Martin Liška <mliska@suse.cz> Link: http://lore.kernel.org/lkml/c3c7e959-9f7f-18e2-e795-f604275cbac3@suse.cz Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-30perf tools: Preserve identifier id in OCaml demanglerFabian Hemmer
Some OCaml developers reported that this bit of information is sometimes useful for disambiguating functions for which the OCaml compiler assigns the same name, e.g. nested or inlined functions. Signed-off-by: Fabian Hemmer <copy@copy.sh> Link: http://lore.kernel.org/lkml/20210226075223.p3s5oz4jbxwnqjtv@nyu Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-29Merge remote-tracking branch 'torvalds/master' into perf/coreArnaldo Carvalho de Melo
To pick up fixes sent via perf/urgent and in the BPF tools/ directories. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf test: Change to use bash for daemon testLeo Yan
When executing the daemon test on Arm64 and x86 with Debian (Buster) distro, both skip the test case with the log: # ./perf test -v 76 76: daemon operations : --- start --- test child forked, pid 11687 test daemon list trap: SIGINT: bad trap ./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name test child finished with -2 ---- end ---- daemon operations: Skip So the error happens for the variable expansion when use local variable in the shell script. Since Debian Buster uses dash but not bash as non-interactive shell, when execute the daemon testing, it hits a known issue for dash which was reported [1]. To resolve this issue, one option is to add double quotes for all local variables assignment, so need to change the code from: local line=`perf daemon --config ${config} -x: | head -2 | tail -1` ... to: local line="`perf daemon --config ${config} -x: | head -2 | tail -1`" But the testing script has bunch of local variables, this leads to big changes for whole script. On the other hand, the testing script asks to use the "local" feature which is bash-specific, so this patch explicitly uses "#!/bin/bash" to ensure running the script with bash. After: # ./perf test -v 76 76: daemon operations : --- start --- test child forked, pid 11329 test daemon list test daemon reconfig test daemon stop test daemon signal signal 12 sent to session 'test [11596]' signal 12 sent to session 'test [11596]' test daemon ping test daemon lock test child finished with 0 ---- end ---- daemon operations: Ok [1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097 Fixes: 2291bb915b55 ("perf tests: Add daemon 'list' command test") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf sort: Display sort dimension p_stage_cyc only on supported archsAthira Rajeev
The sort dimension "p_stage_cyc" is used to represent pipeline stage cycle information. Presently, this is used only in powerpc. For unsupported platforms, we don't want to display it in the perf report output columns. Hence add check in sort_dimension__add() and skip the sort key incase it is not applicable for the particular arch. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-6-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf tools: Support pipeline stage cycles for powerpcAthira Rajeev
The pipeline stage cycles details can be recorded on powerpc from the contents of Performance Monitor Unit (PMU) registers. On ISA v3.1 platform, sampling registers exposes the cycles spent in different pipeline stages. Patch adds perf tools support to present two of the cycle counter information along with memory latency (weight). Re-use the field 'ins_lat' for storing the first pipeline stage cycle. This is stored in 'var2_w' field of 'perf_sample_weight'. Add a new field 'p_stage_cyc' to store the second pipeline stage cycle which is stored in 'var3_w' field of perf_sample_weight. Add new sort function 'Pipeline Stage Cycle' and include this in default_mem_sort_order[]. This new sort function may be used to denote some other pipeline stage in another architecture. So add this to list of sort entries that can have dynamic header string. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-5-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf powerpc: Add support for PERF_SAMPLE_WEIGHT_STRUCTAthira Rajeev
Add arch specific arch_evsel__set_sample_weight() to set the new sample type for powerpc. Add arch specific arch_perf_parse_sample_weight() to store the sample->weight values depending on the sample type applied. if the new sample type (PERF_SAMPLE_WEIGHT_STRUCT) is applied, store only the lower 32 bits to sample->weight. If sample type is 'PERF_SAMPLE_WEIGHT', store the full 64-bit to sample->weight. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-4-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-26perf sort: Add dynamic headers for perf report columnsAthira Rajeev
Currently the header string for different columns in perf report is fixed. Some fields of perf sample could have different meaning for different architectures than the meaning conveyed by the header string. An example is the new field 'var2_w' of perf_sample_weight structure. This is presently captured as 'Local INSTR Latency' in perf mem report. But this could be used to denote a different latency cycle in another architecture. Introduce a weak function arch_perf_header_entry() to set the arch specific header string for the fields which can contain dynamic header. If the architecture do not have this function, fall back to the default header string value. Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/1616425047-1666-3-git-send-email-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-25perf daemon: Remove duplicate includesWan Jiabing
sys/stat.h has been included at line 23, so remove the duplicate one at line 27. linux/string.h has been included at line 7, so remove the duplicate one at line 9. time.h has been included at line 14, so remove the duplicate one at line 28. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210323050139.287461-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-25perf tools: Remove duplicate struct forward declarationsWan Jiabing
'struct evlist' has been declared at 10th line. 'struct comm' has been declared at 15th line. Remove the duplicates Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kael_w@yeah.net Link: http://lore.kernel.org/lkml/20210325043947.846093-1-wanjiabing@vivo.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf record: Fix memory leak in vDSO found using ASANNamhyung Kim
I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 #5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #6 0x559bce512f6b in machines__deliver_event util/session.c:1481 #7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #10 0x559bce519bea in __perf_session__process_events util/session.c:2268 #11 0x559bce519bea in perf_session__process_events util/session.c:2297 #12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 #5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 #6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 #7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 #8 0x559bce519bea in __perf_session__process_events util/session.c:2268 #9 0x559bce519bea in perf_session__process_events util/session.c:2297 #10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 #11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 #12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 #13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 #14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf test: Remove now useless failing sub test "BPF relocation checker"Thomas Richter
For some time now the 'perf test 42: BPF filter' returns an error on bpf relocation subtest, at least on x86 and s390. This is caused by d859900c4c56dc4f ("bpf, libbpf: support global data/bss/rodata sections") which introduces support for global variables in eBPF programs. Perf test 42.4 checks that the eBPF relocation fails when the eBPF program contains a global variable. It returns OK when the eBPF program could not be loaded and FAILED otherwise. With above commit the test logic for the eBPF relocation is obsolete. The loading of the eBPF now succeeds and the test always shows FAILED. This patch removes the sub test completely. Also a lot of eBPF program testing is done in the eBPF test suite, it also contains tests for global variables. Output before: 42: BPF filter : 42.1: Basic BPF filtering : Ok 42.2: BPF pinning : Ok 42.3: BPF prologue generation : Ok 42.4: BPF relocation checker : Failed # Output after: # ./perf test -F 42 42: BPF filter : 42.1: Basic BPF filtering : Ok 42.2: BPF pinning : Ok 42.3: BPF prologue generation : Ok # Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20210324083734.1953123-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf daemon: Return from kill functionsJiri Olsa
We should return correctly and warn in both daemon_session__kill() and daemon__kill() after we tried everything to kill sessions. The current code will keep on looping and waiting. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210320221013.1619613-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf daemon: Force waipid for all session on SIGCHLD deliveryJiri Olsa
If we don't process SIGCHLD before another comes, we will see just one SIGCHLD as a result. In this case current code will miss exit notification for a session and wait forever. Adding extra waitpid check for all sessions when SIGCHLD is received, to make sure we don't miss any session exit. Also fix close condition for signal_fd. Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210320221013.1619613-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf test: Add CSV summary testJin Yao
The patch "perf stat: Align CSV output for summary mode" aligned CSV output and added "summary" to the first column of summary lines. Now we check if the "summary" string is added to the CSV output. If we set '--no-csv-summary' option, the "summary" string would not be added, also check with this case. Committer testing: $ perf test csv 84: perf stat csv summary test : Ok $ Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210319070156.20394-2-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-24perf stat: Align CSV output for summary modeJin Yao
The 'perf stat' subcommand supports the request for a summary of the interval counter readings. But the summary lines break the CSV output so it's hard for scripts to parse the result. Before: # perf stat -x, -I1000 --interval-count 1 --summary 1.001323097,8013.48,msec,cpu-clock,8013483384,100.00,8.013,CPUs utilized 1.001323097,270,,context-switches,8013513297,100.00,0.034,K/sec 1.001323097,13,,cpu-migrations,8013530032,100.00,0.002,K/sec 1.001323097,184,,page-faults,8013546992,100.00,0.023,K/sec 1.001323097,20574191,,cycles,8013551506,100.00,0.003,GHz 1.001323097,10562267,,instructions,8013564958,100.00,0.51,insn per cycle 1.001323097,2019244,,branches,8013575673,100.00,0.252,M/sec 1.001323097,106152,,branch-misses,8013585776,100.00,5.26,of all branches 8013.48,msec,cpu-clock,8013483384,100.00,7.984,CPUs utilized 270,,context-switches,8013513297,100.00,0.034,K/sec 13,,cpu-migrations,8013530032,100.00,0.002,K/sec 184,,page-faults,8013546992,100.00,0.023,K/sec 20574191,,cycles,8013551506,100.00,0.003,GHz 10562267,,instructions,8013564958,100.00,0.51,insn per cycle 2019244,,branches,8013575673,100.00,0.252,M/sec 106152,,branch-misses,8013585776,100.00,5.26,of all branches The summary line loses the timestamp column, which breaks the CSV output. We add a column at the original 'timestamp' position and it just says 'summary' for the summary line. After: # perf stat -x, -I1000 --interval-count 1 --summary 1.001196053,8012.72,msec,cpu-clock,8012722903,100.00,8.013,CPUs utilized 1.001196053,218,,context-switches,8012753271,100.00,0.027,K/sec 1.001196053,9,,cpu-migrations,8012769767,100.00,0.001,K/sec 1.001196053,0,,page-faults,8012786257,100.00,0.000,K/sec 1.001196053,15004518,,cycles,8012790637,100.00,0.002,GHz 1.001196053,7954691,,instructions,8012804027,100.00,0.53,insn per cycle 1.001196053,1590259,,branches,8012814766,100.00,0.198,M/sec 1.001196053,82601,,branch-misses,8012824365,100.00,5.19,of all branches summary,8012.72,msec,cpu-clock,8012722903,100.00,7.986,CPUs utilized summary,218,,context-switches,8012753271,100.00,0.027,K/sec summary,9,,cpu-migrations,8012769767,100.00,0.001,K/sec summary,0,,page-faults,8012786257,100.00,0.000,K/sec summary,15004518,,cycles,8012790637,100.00,0.002,GHz summary,7954691,,instructions,8012804027,100.00,0.53,insn per cycle summary,1590259,,branches,8012814766,100.00,0.198,M/sec summary,82601,,branch-misses,8012824365,100.00,5.19,of all branches Now it's easy for script to analyse the summary lines. Of course, we also consider not to break possible existing scripts which can continue to use the broken CSV format by using a new '--no-csv-summary.' option. # perf stat -x, -I1000 --interval-count 1 --summary --no-csv-summary 1.001213261,8012.67,msec,cpu-clock,8012672327,100.00,8.013,CPUs utilized 1.001213261,197,,context-switches,8012703742,100.00,24.586,/sec 1.001213261,9,,cpu-migrations,8012720902,100.00,1.123,/sec 1.001213261,644,,page-faults,8012738266,100.00,80.373,/sec 1.001213261,18350698,,cycles,8012744109,100.00,0.002,GHz 1.001213261,12745021,,instructions,8012759001,100.00,0.69,insn per cycle 1.001213261,2458033,,branches,8012770864,100.00,306.768,K/sec 1.001213261,102107,,branch-misses,8012781751,100.00,4.15,of all branches 8012.67,msec,cpu-clock,8012672327,100.00,7.985,CPUs utilized 197,,context-switches,8012703742,100.00,24.586,/sec 9,,cpu-migrations,8012720902,100.00,1.123,/sec 644,,page-faults,8012738266,100.00,80.373,/sec 18350698,,cycles,8012744109,100.00,0.002,GHz 12745021,,instructions,8012759001,100.00,0.69,insn per cycle 2458033,,branches,8012770864,100.00,306.768,K/sec 102107,,branch-misses,8012781751,100.00,4.15,of all branches This option can be enabled in perf config by setting the variable 'stat.no-csv-summary'. # perf config stat.no-csv-summary=true # perf config -l stat.no-csv-summary=true # perf stat -x, -I1000 --interval-count 1 --summary 1.001330198,8013.28,msec,cpu-clock,8013279201,100.00,8.013,CPUs utilized 1.001330198,205,,context-switches,8013308394,100.00,25.583,/sec 1.001330198,10,,cpu-migrations,8013324681,100.00,1.248,/sec 1.001330198,0,,page-faults,8013340926,100.00,0.000,/sec 1.001330198,8027742,,cycles,8013344503,100.00,0.001,GHz 1.001330198,2871717,,instructions,8013356501,100.00,0.36,insn per cycle 1.001330198,553564,,branches,8013366204,100.00,69.081,K/sec 1.001330198,54021,,branch-misses,8013375952,100.00,9.76,of all branches 8013.28,msec,cpu-clock,8013279201,100.00,7.985,CPUs utilized 205,,context-switches,8013308394,100.00,25.583,/sec 10,,cpu-migrations,8013324681,100.00,1.248,/sec 0,,page-faults,8013340926,100.00,0.000,/sec 8027742,,cycles,8013344503,100.00,0.001,GHz 2871717,,instructions,8013356501,100.00,0.36,insn per cycle 553564,,branches,8013366204,100.00,69.081,K/sec 54021,,branch-misses,8013375952,100.00,9.76,of all branches Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210319070156.20394-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-23perf test: Add a shell test for 'perf stat --bpf-counters' new optionSong Liu
Add a test to compare the output of perf-stat with and without option --bpf-counters. If the difference is more than 10%, the test is considered as failed. Committer testing: # perf test bpf-counters 86: perf stat --bpf-counters test : Ok # perf test -v bpf-counters 86: perf stat --bpf-counters test : --- start --- test child forked, pid 2433339 test child finished with 0 ---- end ---- perf stat --bpf-counters test: Ok # Signed-off-by: Song Liu <songliubraving@fb.com> Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/EC00E37D-8587-4662-8E30-7AD5F874FA84@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-23perf stat: Measure 't0' and 'ref_time' after enable_counters()Song Liu
Take measurements of 't0' and 'ref_time' after enable_counters(), so that they only measure the time consumed when the counters are enabled. Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Andi Kleen <andi@firstfloor.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Link: http://lore.kernel.org/lkml/20210316211837.910506-3-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-23perf stat: Introduce 'bperf' to share hardware PMCs with BPFSong Liu
The perf tool uses performance monitoring counters (PMCs) to monitor system performance. The PMCs are limited hardware resources. For example, Intel CPUs have 3x fixed PMCs and 4x programmable PMCs per cpu. Modern data center systems use these PMCs in many different ways: system level monitoring, (maybe nested) container level monitoring, per process monitoring, profiling (in sample mode), etc. In some cases, there are more active perf_events than available hardware PMCs. To allow all perf_events to have a chance to run, it is necessary to do expensive time multiplexing of events. On the other hand, many monitoring tools count the common metrics (cycles, instructions). It is a waste to have multiple tools create multiple perf_events of "cycles" and occupy multiple PMCs. bperf tries to reduce such wastes by allowing multiple perf_events of "cycles" or "instructions" (at different scopes) to share PMUs. Instead of having each perf-stat session to read its own perf_events, bperf uses BPF programs to read the perf_events and aggregate readings to BPF maps. Then, the perf-stat session(s) reads the values from these BPF maps. Please refer to the comment before the definition of bperf_ops for the description of bperf architecture. bperf is off by default. To enable it, pass --bpf-counters option to perf-stat. bperf uses a BPF hashmap to share information about BPF programs and maps used by bperf. This map is pinned to bpffs. The default path is /sys/fs/bpf/perf_attr_map. The user could change the path with option --bpf-attr-map. Committer testing: # dmesg|grep "Performance Events" -A5 [ 0.225277] Performance Events: Fam17h+ core perfctr, AMD PMU driver. [ 0.225280] ... version: 0 [ 0.225280] ... bit width: 48 [ 0.225281] ... generic registers: 6 [ 0.225281] ... value mask: 0000ffffffffffff [ 0.225281] ... max period: 00007fffffffffff # # for a in $(seq 6) ; do perf stat -a -e cycles,instructions sleep 100000 & done [1] 2436231 [2] 2436232 [3] 2436233 [4] 2436234 [5] 2436235 [6] 2436236 # perf stat -a -e cycles,instructions sleep 0.1 Performance counter stats for 'system wide': 310,326,987 cycles (41.87%) 236,143,290 instructions # 0.76 insn per cycle (41.87%) 0.100800885 seconds time elapsed # We can see that the counters were enabled for this workload 41.87% of the time. Now with --bpf-counters: # for a in $(seq 32) ; do perf stat --bpf-counters -a -e cycles,instructions sleep 100000 & done [1] 2436514 [2] 2436515 [3] 2436516 [4] 2436517 [5] 2436518 [6] 2436519 [7] 2436520 [8] 2436521 [9] 2436522 [10] 2436523 [11] 2436524 [12] 2436525 [13] 2436526 [14] 2436527 [15] 2436528 [16] 2436529 [17] 2436530 [18] 2436531 [19] 2436532 [20] 2436533 [21] 2436534 [22] 2436535 [23] 2436536 [24] 2436537 [25] 2436538 [26] 2436539 [27] 2436540 [28] 2436541 [29] 2436542 [30] 2436543 [31] 2436544 [32] 2436545 # # ls -la /sys/fs/bpf/perf_attr_map -rw-------. 1 root root 0 Mar 23 14:53 /sys/fs/bpf/perf_attr_map # bpftool map | grep bperf | wc -l 64 # # bpftool map | tail 1265: percpu_array name accum_readings flags 0x0 key 4B value 24B max_entries 1 memlock 4096B 1266: hash name filter flags 0x0 key 4B value 4B max_entries 1 memlock 4096B 1267: array name bperf_fo.bss flags 0x400 key 4B value 8B max_entries 1 memlock 4096B btf_id 996 pids perf(2436545) 1268: percpu_array name accum_readings flags 0x0 key 4B value 24B max_entries 1 memlock 4096B 1269: hash name filter flags 0x0 key 4B value 4B max_entries 1 memlock 4096B 1270: array name bperf_fo.bss flags 0x400 key 4B value 8B max_entries 1 memlock 4096B btf_id 997 pids perf(2436541) 1285: array name pid_iter.rodata flags 0x480 key 4B value 4B max_entries 1 memlock 4096B btf_id 1017 frozen pids bpftool(2437504) 1286: array flags 0x0 key 4B value 32B max_entries 1 memlock 4096B # # bpftool map dump id 1268 | tail value (CPU 21): 8f f3 bc ca 00 00 00 00 80 fd 2a d1 4d 00 00 00 80 fd 2a d1 4d 00 00 00 value (CPU 22): 7e d5 64 4d 00 00 00 00 a4 8a 2e ee 4d 00 00 00 a4 8a 2e ee 4d 00 00 00 value (CPU 23): a7 78 3e 06 01 00 00 00 b2 34 94 f6 4d 00 00 00 b2 34 94 f6 4d 00 00 00 Found 1 element # bpftool map dump id 1268 | tail value (CPU 21): c6 8b d9 ca 00 00 00 00 20 c6 fc 83 4e 00 00 00 20 c6 fc 83 4e 00 00 00 value (CPU 22): 9c b4 d2 4d 00 00 00 00 3e 0c df 89 4e 00 00 00 3e 0c df 89 4e 00 00 00 value (CPU 23): 18 43 66 06 01 00 00 00 5b 69 ed 83 4e 00 00 00 5b 69 ed 83 4e 00 00 00 Found 1 element # bpftool map dump id 1268 | tail value (CPU 21): f2 6e db ca 00 00 00 00 92 67 4c ba 4e 00 00 00 92 67 4c ba 4e 00 00 00 value (CPU 22): dc 8e e1 4d 00 00 00 00 d9 32 7a c5 4e 00 00 00 d9 32 7a c5 4e 00 00 00 value (CPU 23): bd 2b 73 06 01 00 00 00 7c 73 87 bf 4e 00 00 00 7c 73 87 bf 4e 00 00 00 Found 1 element # # perf stat --bpf-counters -a -e cycles,instructions sleep 0.1 Performance counter stats for 'system wide': 119,410,122 cycles 152,105,479 instructions # 1.27 insn per cycle 0.101395093 seconds time elapsed # See? We had the counters enabled all the time. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: kernel-team@fb.com Link: http://lore.kernel.org/lkml/20210316211837.910506-2-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-23perf tools: Fix various typos in commentsIngo Molnar
Fix ~124 single-word typos and a few spelling errors in the perf tooling code, accumulated over the years. Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210321113734.GA248990@gmail.com Link: http://lore.kernel.org/lkml/20210323160915.GA61903@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-18Merge tag 'v5.12-rc3' into x86/cleanups, to refresh the treeIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-03-17perf test: Add 30s timeout for wait for daemon start.Ian Rogers
Retry the ping loop upto 600 times, or approximately 30 seconds, to make sure the test does hang at start up. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210317005505.2794804-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-17perf test: Cleanup daemon if test is interrupted.Ian Rogers
Reorder daemon_start and daemon_exit as the trap handler is added in daemon_start referencing daemon_exit. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210317005505.2794804-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-17perf test: Remove unused argumentIan Rogers
Remove unused argument from daemon_exit. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210317005505.2794804-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-16perf top: Fix BPF support related crash with perf_event_paranoid=3 + ↵Jackie Liu
kptr_restrict After installing the libelf-dev package and compiling perf, if we have kptr_restrict=2 and perf_event_paranoid=3 'perf top' will crash because the value of /proc/kallsyms cannot be obtained, which leads to info->jited_ksyms == NULL. In order to solve this problem, Add a check before use. Also plug some leaks on the error path. Suggested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: jackie liu <liuyun01@kylinos.cn> Link: http://lore.kernel.org/lkml/20210316012453.1156-1-liuyun01@kylinos.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf stat: Improve readability of shadow statsChangbin Du
This adds function convert_unit_double() and selects appropriate unit for shadow stats between K/M/G. $ sudo perf stat -a -- sleep 1 Before: Unit 'M' is selected even the number is very small. Performance counter stats for 'system wide': 4,003.06 msec cpu-clock # 3.998 CPUs utilized 16,179 context-switches # 0.004 M/sec 161 cpu-migrations # 0.040 K/sec 4,699 page-faults # 0.001 M/sec 6,135,801,925 cycles # 1.533 GHz (83.21%) 5,783,308,491 stalled-cycles-frontend # 94.26% frontend cycles idle (83.21%) 4,543,694,050 stalled-cycles-backend # 74.05% backend cycles idle (66.49%) 4,720,130,587 instructions # 0.77 insn per cycle # 1.23 stalled cycles per insn (83.28%) 753,848,078 branches # 188.318 M/sec (83.61%) 37,457,747 branch-misses # 4.97% of all branches (83.48%) 1.001283725 seconds time elapsed After: $ sudo perf stat -a -- sleep 2 Performance counter stats for 'system wide': 8,005.52 msec cpu-clock # 3.999 CPUs utilized 10,715 context-switches # 1.338 K/sec 785 cpu-migrations # 98.057 /sec 102 page-faults # 12.741 /sec 1,948,202,279 cycles # 0.243 GHz 2,816,470,932 stalled-cycles-frontend # 144.57% frontend cycles idle 2,661,172,207 stalled-cycles-backend # 136.60% backend cycles idle 464,172,105 instructions # 0.24 insn per cycle # 6.07 stalled cycles per insn 91,567,662 branches # 11.438 M/sec 7,756,054 branch-misses # 8.47% of all branches 2.002040043 seconds time elapsed v2: o do not change 'sec' to 'cpu-sec'. o use convert_unit_double to implement convert_unit. Signed-off-by: Changbin Du <changbin.du@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210315143047.3867-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf stat: Elaborate use cases for the -n/--null command line optionArnaldo Carvalho de Melo
The existing text was way too terse, pick the intended usage from the cset that introduced this option. Twitter: https://twitter.com/_monoid/status/1371461130175004672?s=20 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf vendor events arm64: Add Fujitsu A64FX pmu eventShunsuke Nakamura
Add pmu events for A64FX. Documentation source: https://github.com/fujitsu/A64FX/blob/master/doc/A64FX_PMU_Events_v1.2.pdf Signed-off-by: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com> Reviewed-by: John Garry <john.garry@huawei.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210308105342.746940-3-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf vendor events arm64: Add more common and uarch eventsShunsuke Nakamura
Add the following events.[1] Common architectural events: - L2I_TLB_REFILL - L2I_TLB - SIMD_INST_RETIRED - SVE_INST_RETIRED Common microarchitectural events: - UOP_SPEC - SVE_MATH_SPEC - FP_SPEC - FP_FMA_SPEC - FP_RECPE_SPEC - FP_CVT_SPEC - ASE_SVE_INT_SPEC - SVE_PRED_SPEC - SVE_MOVPRFX_SPEC - SVE_MOVPRFX_U_SPEC - ASE_SVE_LD_SPEC - ASE_SVE_ST_SPEC - PRF_SPEC - BASE_LD_REG_SPEC - BASE_ST_REG_SPEC - SVE_LDR_REG_SPEC - SVE_STR_REG_SPEC - SVE_LDR_PREG_SPEC - SVE_STR_PREG_SPEC - SVE_PRF_CONTIG_SPEC - ASE_SVE_LD_MULTI_SPEC - ASE_SVE_ST_MULTI_SPEC - SVE_LD_GATHER_SPEC - SVE_ST_SCATTER_SPEC - SVE_PRF_GATHER_SPEC - SVE_LDFF_SPEC - FP_SCALE_OPS_SPEC - FP_FIXED_OPS_SPEC - FP_HP_SCALE_OPS_SPEC - FP_HP_FIXED_OPS_SPEC - FP_SP_SCALE_OPS_SPEC - FP_SP_FIXED_OPS_SPEC - FP_DP_SCALE_OPS_SPEC - FP_DP_FIXED_OPS_SPEC Reference document is at the following: [1] https://github.com/fujitsu/A64FX/blob/master/doc/A64FX_PMU_Events_v1.2.pdf Signed-off-by: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com> Reviewed-by: John Garry <john.garry@huawei.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20210308105342.746940-2-nakamura.shun@fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf evlist: Change the COMM when preparing the workloadArnaldo Carvalho de Melo
It was reported that --exclude-perf wasn't working, as tracepoints were appearing in 'perf script' output as having the 'perf' COMM, that is just the window in evlist__prepare_workload() after the fork() and before the execvp() call for workloads specified in the command line. Example: # perf record -e kmem:kmalloc --filter 'bytes_alloc<650 && bytes_alloc>620' --exclude-perf -e kmem:kfree --exclude-perf -aR sleep 30 Then: # perf script perf 15905 [009] 1498.356094: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) perf 15905 [009] 1498.356116: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil) perf 15905 [009] 1498.356116: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf750421c00 perf 15905 [009] 1498.356138: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) perf 15905 [009] 1498.356148: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil) perf 15905 [009] 1498.356148: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf750421c00 perf 15905 [009] 1498.356168: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) perf 15905 [009] 1498.356176: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil) <SNIP> perf 15905 [009] 1498.356348: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) perf 15905 [014] 1498.356386: kmem:kfree: call_site=security_compute_sid.part.0+0x3b2 ptr=(nil) perf 15905 [014] 1498.356423: kmem:kfree: call_site=load_elf_binary+0x207 ptr=0xffff9cf5b2a34220 perf 15905 [014] 1498.356694: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf6d0b3b000 sleep 15905 [014] 1498.356739: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) Use prctl() to show that that is just the preparation of the workload: # perf script perf-exec 19036 [009] 2199.357582: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) perf-exec 19036 [009] 2199.357604: kmem:kfree: call_site=free_bprm+0x8f ptr=(nil) perf-exec 19036 [009] 2199.357604: kmem:kfree: call_site=do_execveat_common+0x19d ptr=0xffff9cf786459800 perf-exec 19036 [009] 2199.357630: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) <SNIP> perf-exec 19036 [000] 2199.358277: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786fb9c00 perf-exec 19036 [000] 2199.358278: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786458200 perf-exec 19036 [000] 2199.358279: kmem:kfree: call_site=__free_slab+0xb5 ptr=0xffff9cf786458600 sleep 19036 [000] 2199.358316: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) sleep 19036 [000] 2199.358323: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=(nil) sleep 19036 [000] 2199.358330: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000 sleep 19036 [000] 2199.358337: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000 sleep 19036 [000] 2199.358339: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000 sleep 19036 [000] 2199.358341: kmem:kfree: call_site=perf_event_mmap+0x279 ptr=0xffff9cf58be2d000 Reporter: zhanweiw <wingfancy@hotmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212213 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15perf pmu: Validate raw event with sysfs exported format bitsJin Yao
A raw PMU event (eventsel+umask) in the form of rNNN is supported by perf but lacks of checking for the validity of raw encoding. For example, bit 16 and bit 17 are not valid on KBL but perf doesn't report warning when encoding with these bits. Before: # ./perf stat -e cpu/r031234/ -a -- sleep 1 Performance counter stats for 'system wide': 0 cpu/r031234/ 1.003798924 seconds time elapsed It may silently measure the wrong event! The kernel supported bits have been exported through /sys/devices/<pmu>/format/. Perf collects the information to 'struct perf_pmu_format' and links it to 'pmu->format' list. The 'struct perf_pmu_format' has a bitmap which records the valid bits for this format. For example, root@kbl-ppc:/sys/devices/cpu/format# cat umask config:8-15 The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'. We collect total valid bits of all formats, save to a local variable 'masks' and reverse it. Now '~masks' represents total invalid bits. bits = config & ~masks; The set bits in 'bits' indicate the invalid bits used in config. Finally we use bitmap_scnprintf to report the invalid bits. Some architectures may not export supported bits through sysfs, so if masks is 0, perf_pmu__warn_invalid_config directly returns. After: Single event without name: # ./perf stat -e cpu/r031234/ -a -- sleep 1 WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)! Performance counter stats for 'system wide': 0 cpu/r031234/ 1.001597373 seconds time elapsed Multiple events with names: # ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1 WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)! WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)! Performance counter stats for 'system wide': 0 aaa 0 bbb 1.001573787 seconds time elapsed Warnings are reported for invalid bits. Co-developed-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210310051138.12154-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-03-15tools/perf: Convert to insn_decode()Borislav Petkov
Simplify code, no functional changes. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lkml.kernel.org/r/20210304174237.31945-20-bp@alien8.de
2021-03-15x86/insn: Add a __ignore_sync_check__ markerBorislav Petkov
Add an explicit __ignore_sync_check__ marker which will be used to mark lines which are supposed to be ignored by file synchronization check scripts, its advantage being that it explicitly denotes such lines in the code. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20210304174237.31945-4-bp@alien8.de
generated by cgit (git 2.34.1) at 2025-07-18 12:35:39 +0000