summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2015-11-27perf hists browser: Update nr entries regardless of min percentNamhyung Kim
When perf report on TUI was called with -S symbol filter, it should update nr entries even if min_pcnt is 0. IIRC the reason was to update nr entries after applying minimum percent threshold. But if symbol filter was given on command line (with -S option), it should use hists->nr_non_filtered_entries instead of hists->nr_entries. So this patch fixes a bug of navigating hists browser that the cursor goes beyond the number of entries when -S (or similar) option is used. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448645559-31167-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf hists: Do not skip elided fields when processing samplesNamhyung Kim
If user gives a filter, perf marks the corresponding column elided and omits the output. But it should process and aggregates samples using the field, otherwise samples will be aggregated as if the column was not there resulted in incorrect output. For example, I'd like to set a filter on native_write_msr_safe. The original overhead of the function is negligible. $ perf report | grep native_write_msr_safe 0.00% swapper [kernel.vmlinux] native_write_msr_safe 0.00% perf [kernel.vmlinux] native_write_msr_safe However adding -S option gives different output. $ perf report -S native_write_msr_safe --percentage absolute | \ > grep -e swapper -e perf 51.47% swapper [kernel.vmlinux] 4.14% perf [kernel.vmlinux] Since it aggregated samples using comm and dso only. In fact, the above values are same when it sorts with -s comm,dso. $ perf report -s comm,dso | grep -e swapper -e perf 51.47% swapper [kernel.vmlinux] 4.14% perf [kernel.vmlinux] This resulted in TUI failure with -ERANGE since it tries to increase sample hit count for annotation with wrong symbols due to incorrect aggregation. This patch fixes it not to skip elided fields when comparing samples in order to insert them to the hists. Commiter note: After the patch, with a different workloads: # perf report --show-total-period -S native_write_msr_safe --stdio # # symbol: native_write_msr_safe # # Samples: 455 of event 'cycles:pp' # Event count (approx.): 134787489 # # Overhead Period Command Shared Object # ........ ...... ............... ................ # 0.22% 293081 qemu-system-x86 [vmlinux] 0.19% 255914 swapper [vmlinux] 0.00% 2054 Timer [vmlinux] 0.00% 1021 firefox [vmlinux] 0.00% 2 perf [vmlinux] # perf report --show-total-period | grep native_write_msr_safe Failed to open /tmp/perf-14838.map, continuing without symbols 0.22% 293081 qemu-system-x86 [vmlinux] [k] native_write_msr_safe 0.19% 255914 swapper [vmlinux] [k] native_write_msr_safe 0.00% 2054 Timer [vmlinux] [k] native_write_msr_safe 0.00% 1021 firefox [vmlinux] [k] native_write_msr_safe 0.00% 2 perf [vmlinux] [k] native_write_msr_safe # Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448645559-31167-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf report: Show error message when processing sample failsNamhyung Kim
Currently when perf fails to process samples for some reason, it doesn't show any message about the failure. This is very inconvenient for users especially on TUI as screen is reset after the failure. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448645559-31167-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf list: Robustify event printing routineArnaldo Carvalho de Melo
When a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") added PERF_COUNT_SW_BPF_OUTPUT we ended up with a new entry in the event_symbols_sw array that wasn't initialized, thus set to NULL, fix print_symbol_events() to check for that case so that we don't crash if this happens again. (gdb) bt #0 __match_glob (ignore_space=false, pat=<optimized out>, str=<optimized out>) at util/string.c:198 #1 strglobmatch (str=<optimized out>, pat=pat@entry=0x7fffffffe61d "stall") at util/string.c:252 #2 0x00000000004993a5 in print_symbol_events (type=1, syms=0x872880 <event_symbols_sw+160>, max=11, name_only=false, event_glob=0x7fffffffe61d "stall") at util/parse-events.c:1615 #3 print_events (event_glob=event_glob@entry=0x7fffffffe61d "stall", name_only=false) at util/parse-events.c:1675 #4 0x000000000042c79e in cmd_list (argc=1, argv=0x7fffffffe390, prefix=<optimized out>) at builtin-list.c:68 #5 0x00000000004788a5 in run_builtin (p=p@entry=0x871758 <commands+120>, argc=argc@entry=2, argv=argv@entry=0x7fffffffe390) at perf.c:370 #6 0x0000000000420ab0 in handle_internal_command (argv=0x7fffffffe390, argc=2) at perf.c:429 #7 run_argv (argv=0x7fffffffe110, argcp=0x7fffffffe11c) at perf.c:473 #8 main (argc=2, argv=0x7fffffffe390) at perf.c:588 (gdb) p event_symbols_sw[PERF_COUNT_SW_BPF_OUTPUT] $4 = {symbol = 0x0, alias = 0x0} (gdb) A patch to robustify perf to not segfault when the next counter gets added in the kernel will follow this one. Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-57wysblcjfrseb0zg5u7ek10@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf list: Add support for PERF_COUNT_SW_BPF_OUTArnaldo Carvalho de Melo
When PERF_COUNT_SW_BPF_OUTPUT was added to the kernel we should've added it to tools/perf, where it is used just to list events. This ended up causing a segfault in commands like "perf list stall". Fix it by adding that new software counter. A patch to robustify perf to not segfault when the next counter gets added in the kernel will follow this one. Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-uya354upi3eprsey6mi5962d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf test: 'unwind' test should create kernel mapsJiri Olsa
The 'perf test unwind' is failing because it forgot to create the kernel maps, fix it. After the patch: # perf test unwind 40: Test dwarf unwind : Ok Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20151127082121.GA24503@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-27perf buildid-list: Show running kernel build id fixMichael Petlan
The --kernel option of perf buildid-list tool should show the running kernel buildid. The functionality has been lost during other changes of the related code. The build_id__sprintf() function should return length of the build-id string, but it was the length of the build-id raw data instead. Due to that, some return value checking caused that the final string was not printed out. With this patch the build_id__sprintf() returns the correct value, so the --kernel option works again. Before: # perf buildid-list --kernel # After: # perf buildid-list --kernel 972c1edab5bdc06cc224af45d510af662a3c6972 # Signed-off-by: Michael Petlan <mpetlan@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> LPU-Reference: 1448632089.24573.114.camel@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf evlist: Display WEIGHT sample type bitJiri Olsa
Adding WIEGHT bit_name call to display sample_type properly. $ perf evlist -v cpu/mem-loads/pp: ...SNIP... sample_type: IP|TID|TIME|ADDR|ID|CPU|DATA_SRC|WEIGHT ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448465815-27404-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf stat: Clear sample_(type|period) for countingJiri Olsa
Clear sample_(type|period) for counting, as it only confuses debug output with unwanted sampling details: Before: $ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls ------------------------------------------------------------ perf_event_attr: type 2 size 112 config 0x11 { sample_period, sample_freq } 1 sample_type TIME|CPU|PERIOD|RAW read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ... After: $ sudo perf stat -e 'raw_syscalls:sys_enter' -vv ls ------------------------------------------------------------ perf_event_attr: type 2 size 112 config 0x11 read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 enable_on_exec 1 exclude_guest 1 ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448465815-27404-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf symbols: Add the path to vmlinux.debugEkaterina Tumanova
Currently when debuginfo is separated to vmlinux.debug, it's contents get ignored. Let's change that and add it to the vmlinux_path list. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448469166-61363-3-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf symbols: Refactor vmlinux_path__init() to ease path additionsEkaterina Tumanova
Refactor vmlinux_path__init() to ease subsequent additions of new vmlinux locations. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448469166-61363-2-git-send-email-tumanova@linux.vnet.ibm.com [ Rename vmlinux_path__update() to vmlinux_path__add() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf script: Pass perf_script into process_eventJiri Olsa
Passing perf_script struct into process_event function, so we could process configuration data for event printing. It will be used in following patch to get event name string width. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151126175521.GA18979@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf tools: Correctly identify anon_hugepage when generating map (v2)Yannick Brosseau
When parsing /proc/xxx/maps, the sscanf in perf_event__synthesize_mmap_events truncate the map name at the space in "/anon_hugepage (deleted)". is_anon_memory() then only receives the string "/anon_hugepage" and does not detect it. We change is_anon_memory() to only compare the first part of the string, effectively ignoring if " (deleted)" is there. Signed-off-by: Yannick Brosseau <scientist@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Joshua Zhu <zhu.wen-jie@hp.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1448538152-2898-1-git-send-email-scientist@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf machine: Adjust dso->long_name for offline moduleWang Nan
Something unexpected may happen if copy statically linked perf to a production environment: # ./perf probe -m ./mymodule.ko my_func [mymodule] with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. # ./perf buildid-cache -a ./mymodule.ko # ./perf probe -m ./mymodule.ko my_func Added new event: probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko) You can now use it in all perf tools, such as: perf record -e probe:my_func -aR sleep 1 Where: # ldd ./perf not a dynamic executable # strace -e open ./perf probe -m ./mymodule.ko my_func ... open("/home/wangnan/kmodule/mymodule.ko", O_RDONLY) = 3 open("/home/wangnan/kmodule/../lib64/elfutils/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) ... open("/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/lib64/tls/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/lib64/libebl_x86_64.so", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory) open("/home/wangnan/.debug/.build-id/32/6ab42550ef3d24944f53c817533728367effeb", O_RDONLY) = -1 ENOENT (No such file or directory) open("[mymodule]", O_RDONLY) = -1 ENOENT (No such file or directory) In the above example, probe fails before we put the module into buildid-cache. However, user would expect it success in both case because perf is able to find probe points actually. The reason is because perf won't utilize module's full path if it failed to open debuginfo. In: convert_to_probe_trace_events -> find_probe_trace_events_from_map -> get_target_map -> kernel_get_module_map -> machine__findnew_module_map -> map_groups__find_by_name map_groups__find_by_name() is able to find the map of that module, but this information is found from /proc/module before it knows the real path of the offline module. Therefore, the map->dso->long_name is set to something like '[mymodule]', which prevent dso__load() find the real path of the module file. In another aspect, if dso__load() can get the offline module through buildid cache, it can read symble table from that ko. Even if debuginfo is not available, 'perf probe' can success if the '.symtab' can be found. This patch improves machine__findnew_module_map(): when dso->long_name is leading with '[' (doesn't find path of module when parsing /proc/modules), fixes it by dso__set_long_name(), so following dso__load() is possible to find the symbol table. This patch won't interfere with buildid matching. Here is the test result: # ./perf probe -m ./mymodule.ko my_func Added new event: probe:my_func (on my_func in /home/wangnan/kmodule/mymodule.ko) You can now use it in all perf tools, such as: perf record -e probe:my_func -aR sleep 1 # ./perf probe -d '*' Removed event: probe:my_func # mv ./mymodule.{ko,.bak} # mv ./moduleb.ko mymodule.ko # ./perf probe -m ./mymodule.ko my_func /home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. # ./perf probe -v -m ./mymodule.ko my_func probe-definition(0): my_func symbol:my_func file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Could not open debuginfo. Try to use symbols. symsrc__init: build id mismatch for /home/wangnan/kmodule/mymodule.ko. /home/wangnan/kmodule/mymodule.ko with build id 326ab42550ef3d24944f53c817533728367effeb not found, continuing without symbols Failed to find symbol my_func in /home/wangnan/kmodule/mymodule.ko Error: Failed to add events. Reason: No such file or directory (Code: -2) Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1448510397-187965-1-git-send-email-wangnan0@huawei.com [ Renamed adjust_dso_long_name() do dso__adjust_kmod_long_name() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf build: Fix traceevent plugins build raceJiri Olsa
Ingo reported following build failure: $ make clean install ... CC plugin_kmem.o fixdep: error opening depfile: ./.plugin_hrtimer.o.d: No such file or directory /home/mingo/tip/tools/build/Makefile.build:77: recipe for target 'plugin_hrtimer.o' failed make[3]: *** [plugin_hrtimer.o] Error 2 Makefile:189: recipe for target 'plugin_hrtimer-in.o' failed make[2]: *** [plugin_hrtimer-in.o] Error 2 Makefile.perf:414: recipe for target 'libtraceevent_plugins' failed make[1]: *** [libtraceevent_plugins] Error 2 make[1]: *** Waiting for unfinished jobs.... Currently we have the install-traceevent-plugins target being dependent on $(LIBTRACEEVENT), which will actualy not build any plugin. So the install-traceevent-plugins target itself will try to build plugins, but.. Plugins built is also triggered by perf build itself via libtraceevent_plugins target. This might cause a race having one make thread removing temp files from another and result in above error. Fixing this by having proper plugins build dependency before installing plugins. Reported-and-Tested-by:: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448546044-28973-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf script: Remove default_scripting_opsJiri Olsa
The default script handler (the one that displays samples on screen) is implemented scripting_ops instance with process_event callback. This way we can't pass any script config into display function, because we don't want perl or python handlers to be depended on perf script internals. Removing the default_scripting_ops and calling process event function directly. This way it's possible to pass perf_script struct and process configuration data in following commit. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1448546125-29245-1-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf top: Fix freeze on --call-graph flat/foldedNamhyung Kim
The callchain rbtree is rebuilt periodically, so it needs to reinitialize the root everytime. Otherwise it can be stuck in the rbtree insertion with stale pointers. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448521700-32062-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf callchain: Honor hide_unresolvedNamhyung Kim
If user requested to hide unresolved entries, skip unresolved callchains as well as hist entries. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448521700-32062-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-25perf probe: Fix to free temporal Dwarf_Frame correctlyMasami Hiramatsu
The commit 05c8d802fa52 ("perf probe: Fix to free temporal Dwarf_Frame") tried to fix the memory leak of Dwarf_Frame, but it released the frame at wrong point. Since the dwarf_frame_cfa(frame, &pf->fb_ops, &nops) can return an address inside the frame data structure to pf->fb_ops, we can not release the frame before using pf->fb_ops. This reverts the commit and releases the frame afterwards (right before returning from call_probe_finder) correctly. Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 05c8d802fa52 ("perf probe: Fix to free temporal Dwarf_Frame") LPU-Reference: 20151125103432.1473.31009.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf callchain: Add missing parent_val initializationJiri Olsa
Adding missing parent_val callchain_node initialization. It's causing segfault in perf top: $ sudo perf top -g perf: Segmentation fault -------- backtrace -------- free_callchain_node(+0x29) in perf [0x4a4b3e] free_callchain(+0x29) in perf [0x4a5a83] hist_entry__delete(+0x126) in perf [0x4c6649] hists__delete_entry(+0x6e) in perf [0x4c66dc] hists__decay_entries(+0x7d) in perf [0x4c6776] perf_top__sort_new_samples(+0x7c) in perf [0x436a78] hist_browser__run(+0xf2) in perf [0x507760] perf_evsel__hists_browse(+0x1da) in perf [0x507c8d] perf_evlist__tui_browse_hists(+0x3e) in perf [0x5088cf] display_thread_tui(+0x7f) in perf [0x437953] start_thread(+0xc5) in libpthread-2.21.so [0x7f7068fbb555] __clone(+0x6d) in libc-2.21.so [0x7f7066fc3b9d] [0x0] Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 4b3a3212233a ("perf hists browser: Support flat callchains") Link: http://lkml.kernel.org/r/20151121102355.GA17313@krava.local Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf config: Add initial man pageTaeung Song
Add perf-config document to describe the perf configuration and a 'list’ subcommand. Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/63AD9B57-7B8C-46F8-8F18-0FFEB9A6A1BC@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf tools: Add 'perf config' commandTaeung Song
The perf configuration file contains many variables to change various aspects of each of its tools, including output, disk usage, etc. But looking at the state of configuration is difficult and there's no documentation about config variables except for the variables in perfconfig.example exist. So this patch adds a 'perf-config' command with a '--list' option. perf config [options] display current perf config variables. # perf config -l | --list Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1447768424-17327-1-git-send-email-treeze.taeung@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf callchain: Add order support for libdw DWARF unwinderJiri Olsa
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libdw DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 21.12% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start $ perf report --stdio --no-children -g caller 21.12% ls libc-2.21.so [.] __strcoll_l | ---_start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp mpsort_with_tmp __strcoll_l Reported-and-Tested-by: Milian Wolff <milian.wolff@kdab.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jan Kratochvil <jkratoch@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20151119130119.GA26617@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf test: Add callchain order setup for DWARF unwinder testJiri Olsa
Adding callchain order setup for DWARF unwinder test. The test now runs unwinder for both callee and caller orders. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1447772739-18471-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf callchain: Add order support for libunwind DWARF unwinderJiri Olsa
As reported by Milian, currently for DWARF unwind (both libdw and libunwind) we display callchain in callee order only. Adding the support to follow callchain order setup to libunwind DWARF unwinder, so we could get following output for report: $ perf record --call-graph dwarf ls ... $ perf report --no-children --stdio 39.26% ls libc-2.21.so [.] __strcoll_l | ---__strcoll_l mpsort_with_tmp mpsort_with_tmp sort_files main __libc_start_main _start 0 $ perf report -g caller --no-children --stdio ... 39.26% ls libc-2.21.so [.] __strcoll_l | ---0 _start __libc_start_main main sort_files mpsort_with_tmp mpsort_with_tmp __strcoll_l Based-on-patch-by: Milian Wolff <milian.wolff@kdab.com> Reported-and-Tested-by: Milian Wolff <milian.wolff@kdab.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20151118075247.GA5416@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-23perf callchain: Move initial entry call into get_entries functionJiri Olsa
Moving initial entry call into get_entries function so all entries processing is on one place. It will be useful for next change that adds ordering logic. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1447772739-18471-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf ui/gtk: Support folded callchainsNamhyung Kim
The folded callchain mode is to print all chains in a single line. Currently perf report --gtk doesn't support folded callchains. Like flat callchains, only leaf nodes are added to the final rbtree so it should show entries in parent nodes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-11-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf ui/gtk: Support flat callchainsNamhyung Kim
The flat callchain mode is to print all chains in a simple flat hierarchy so make it easy to see. Currently perf report --gtk doesn't show flat callchains properly. With flat callchains, only leaf nodes are added to the final rbtree so it should show entries in parent nodes. To do that, add parent_val list to struct callchain_node and show them along with the (normal) val list. See the previous commit on TUI support for more information. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-10-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf hists browser: Support folded callchainsNamhyung Kim
The folded callchain mode prints all chains in a single line. Currently perf report --tui doesn't support folded callchains. Like flat callchains, only leaf nodes are added to the final rbtree so it should show entries in parent nodes. To do that, add flat_val list to struct callchain_node and show them along with the (normal) val list. For example, folded callchain looks like below: $ perf report -g folded --tui Samples: 234 of event 'cycles:pp', Event count (approx.): 32605268 Overhead Command Shared Object Symbol - 39.93% swapper [kernel.vmlinux] [k] intel_idle + 28.63% intel_idle; cpuidle_enter_state; cpuidle_enter; ... + 11.30% intel_idle; cpuidle_enter_state; cpuidle_enter; ... Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-9-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf hists browser: Support flat callchainsNamhyung Kim
The flat callchain mode is to print all chains in a single, simple hierarchy so make it easy to see. Currently perf report --tui doesn't show flat callchains properly. With flat callchains, only leaf nodes are added to the final rbtree so it should show entries in parent nodes. To do that, add parent_val list to struct callchain_node and show them along with the (normal) val list. For example, consider following callchains with '-g graph'. $ perf report -g graph - 39.93% swapper [kernel.vmlinux] [k] intel_idle intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle - cpu_startup_entry 28.63% start_secondary - 11.30% rest_init start_kernel x86_64_start_reservations x86_64_start_kernel Before: $ perf report -g flat - 39.93% swapper [kernel.vmlinux] [k] intel_idle 28.63% start_secondary - 11.30% rest_init start_kernel x86_64_start_reservations x86_64_start_kernel After: $ perf report -g flat - 39.93% swapper [kernel.vmlinux] [k] intel_idle - 28.63% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_secondary - 11.30% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_kernel x86_64_start_reservations x86_64_start_kernel Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf hists browser: Factor out hist_browser__show_callchain_list()Namhyung Kim
This function is to print a single callchain list entry. As this function will be used by other function, factor out to a separate function. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf report: Add callchain value optionNamhyung Kim
Now -g/--call-graph option supports how to display callchain values. Possible values are 'percent', 'period' and 'count'. The percent is same as before and it's the default behavior. The period displays the raw period value rather than the percentage. The count displays the number of occurrences. $ perf report --no-children --stdio -g percent ... 39.93% swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--28.63%-- start_secondary | --11.30%-- rest_init $ perf report --no-children --show-total-period --stdio -g period ... 39.93% 13018705 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--9334403-- start_secondary | --3684302-- rest_init $ perf report --no-children --show-nr-samples --stdio -g count ... 39.93% 80 swapper [kernel.vmlinux] [k] intel_idel | ---intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry | |--57-- start_secondary | --23-- rest_init Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf callchain: Add count fields to struct callchain_nodeNamhyung Kim
It's to track the count of occurrences of the callchains. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Brendan Gregg <brendan.d.gregg@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf callchain: Abstract callchain print functionNamhyung Kim
This is a preparation to support for printing other type of callchain value like count or period. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-4-git-send-email-namhyung@kernel.org [ renamed new _sprintf_ operation to _scnprintf_ ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf report: Support folded callchain mode on --stdioNamhyung Kim
Add new call chain option (-g) 'folded' to print callchains in a line. The callchains are separated by semicolons, and preceded by (absolute) percent values and a space. For example, the following 20 lines can be printed in 3 lines with the folded output mode: $ perf report -g flat --no-children | grep -v ^# | head -20 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry start_secondary 5.88% intel_idle cpuidle_enter_state cpuidle_enter call_cpuidle cpu_startup_entry rest_init start_kernel x86_64_start_reservations x86_64_start_kernel $ perf report -g folded --no-children | grep -v ^# | head -3 60.48% swapper [kernel.vmlinux] [k] intel_idle 54.60% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary 5.88% intel_idle;cpuidle_enter_state;cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel This mode is supported only for --stdio now and intended to be used by some scripts like in FlameGraphs[1]. Support for other UI might be added later. [1] http://www.brendangregg.com/FlameGraphs/cpuflamegraphs.html Requested-and-Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1447047946-1691-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf machine: Fix machine__findnew_module_map to put dsoMasami Hiramatsu
Fix machine__findnew_module_map to drop the reference to the dso because it is already referenced by both machine__findnew_module_dso() and map__new2(). Refcnt debugger shows: ==== [1] ==== Unreclaimed dso: 0x1ffd980 Refcount +1 => 1 at ./perf(dso__new+0x1ff) [0x4a62df] ./perf(__dsos__addnew+0x29) [0x4a6e19] ./perf() [0x4b8b91] ./perf(modules__parse+0xfc) [0x4a9d5c] ./perf() [0x4b8460] ./perf(machine__create_kernel_maps+0x150) [0x4bb550] ./perf(machine__new_host+0xfa) [0x4bb75a] ./perf(init_probe_symbol_maps+0x93) [0x506623] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5] ./perf() [0x4220a9] This map_groups__insert(0x4b8b91) already gets a reference to the new dso: ---- eu-addr2line -e ./perf -f 0x4b8b91 map_groups__insert inlined at util/machine.c:586 in machine__create_module util/map.h:207 ---- So this dso refcnt will be released when map_groups gets released. [snip] Refcount +1 => 2 at ./perf(dso__get+0x34) [0x4a65f4] ./perf() [0x4b8b35] ./perf(modules__parse+0xfc) [0x4a9d5c] ./perf() [0x4b8460] ./perf(machine__create_kernel_maps+0x150) [0x4bb550] ./perf(machine__new_host+0xfa) [0x4bb75a] ./perf(init_probe_symbol_maps+0x93) [0x506623] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5] ./perf() [0x4220a9] Here, machine__findnew_module_dso(0x4b8b35) gets the dso (and stores it in a local variable): ---- # eu-addr2line -e ./perf -f 0x4b8b35 machine__findnew_module_dso inlined at util/machine.c:578 in machine__create_module util/machine.c:514 ---- Refcount +1 => 3 at ./perf(dso__get+0x34) [0x4a65f4] ./perf(map__new2+0x76) [0x4be1c6] ./perf() [0x4b8b4f] ./perf(modules__parse+0xfc) [0x4a9d5c] ./perf() [0x4b8460] ./perf(machine__create_kernel_maps+0x150) [0x4bb550] ./perf(machine__new_host+0xfa) [0x4bb75a] ./perf(init_probe_symbol_maps+0x93) [0x506623] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1345a8eaf5] ./perf() [0x4220a9] But also map__new2() gets the dso which will be put when the map is released. So, we have to drop the constructor reference obtained in machine__findnew_module_dso(). Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064035.30709.58824.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tools: Fix machine__create_kernel_maps to put kernel dso refcountMasami Hiramatsu
Fix machine__create_kernel_maps() to put kernel dso because the dso has been gotten via __machine__create_kernel_maps(). Refcnt debugger shows: ==== [0] ==== Unreclaimed dso: 0x3036ab0 Refcount +1 => 1 at ./perf(dso__new+0x1ff) [0x4a62df] ./perf(__dsos__addnew+0x29) [0x4a6e19] ./perf(dsos__findnew+0xd1) [0x4a7181] ./perf(machine__findnew_kernel+0x27) [0x4a5e17] ./perf() [0x4b8cf2] ./perf(machine__create_kernel_maps+0x28) [0x4bb428] ./perf(machine__new_host+0xfa) [0x4bb74a] ./perf(init_probe_symbol_maps+0x93) [0x506613] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7ffa6809eaf5] ./perf() [0x4220a9] [snip] Refcount +1 => 2 at ./perf(dsos__findnew+0x7e) [0x4a712e] ./perf(machine__findnew_kernel+0x27) [0x4a5e17] ./perf() [0x4b8cf2] ./perf(machine__create_kernel_maps+0x28) [0x4bb428] ./perf(machine__new_host+0xfa) [0x4bb74a] ./perf(init_probe_symbol_maps+0x93) [0x506613] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7ffa6809eaf5] ./perf() [0x4220a9] [snip] Refcount -1 => 1 at ./perf(dso__put+0x2f) [0x4a664f] ./perf(machine__delete+0xfe) [0x4b93ee] ./perf(exit_probe_symbol_maps+0x28) [0x5066b8] ./perf() [0x45628a] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7ffa6809eaf5] ./perf() [0x4220a9] Actually, dsos__findnew gets the dso before returning it, so the dso user (in this case machine__create_kernel_maps) has to put the dso after used. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064033.30709.98954.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tools: Fix __dsos__addnew to put dso after adding it to the listMasami Hiramatsu
__dsos__addnew should drop the constructor reference to dso after adding it to the list, because __dsos__add() will get a reference that will be kept while it is in the list. This fixes DSO leaks when entries are removed to the list and the refcount never gets to zero. Refcnt debugger shows: ==== [0] ==== Unreclaimed dso: 0x2fccab0 Refcount +1 => 1 at ./perf(dso__new+0x1ff) [0x4a62df] ./perf(__dsos__addnew+0x29) [0x4a6e19] ./perf(dsos__findnew+0xd1) [0x4a7281] ./perf(machine__findnew_kernel+0x27) [0x4a5e17] ./perf() [0x4b8df2] ./perf(machine__create_kernel_maps+0x28) [0x4bb528] ./perf(machine__new_host+0xfa) [0x4bb84a] ./perf(init_probe_symbol_maps+0x93) [0x506713] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5] ./perf() [0x4220a9] Refcount +1 => 2 at ./perf(__dsos__addnew+0xfb) [0x4a6eeb] ./perf(dsos__findnew+0xd1) [0x4a7281] ./perf(machine__findnew_kernel+0x27) [0x4a5e17] ./perf() [0x4b8df2] ./perf(machine__create_kernel_maps+0x28) [0x4bb528] ./perf(machine__new_host+0xfa) [0x4bb84a] ./perf(init_probe_symbol_maps+0x93) [0x506713] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5] ./perf() [0x4220a9] Refcount +1 => 3 at ./perf(dsos__findnew+0x7e) [0x4a722e] ./perf(machine__findnew_kernel+0x27) [0x4a5e17] ./perf() [0x4b8df2] ./perf(machine__create_kernel_maps+0x28) [0x4bb528] ./perf(machine__new_host+0xfa) [0x4bb84a] ./perf(init_probe_symbol_maps+0x93) [0x506713] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f46df132af5] ./perf() [0x4220a9] [snip] Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064031.30709.81460.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tools: Fix to put new map after inserting to map_groups in dso__load_symMasami Hiramatsu
Fix dso__load_sym to put the map object which is already insterted to kmaps. Refcnt debugger shows ==== [0] ==== Unreclaimed map: 0x39113e0 Refcount +1 => 1 at ./perf(map__new2+0xb5) [0x4be155] ./perf(dso__load_sym+0xee1) [0x503461] ./perf(dso__load_vmlinux+0xbf) [0x4aa6df] ./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c] ./perf() [0x50528a] ./perf(convert_perf_probe_events+0xd79) [0x50ac29] ./perf() [0x45600f] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5] ./perf() [0x4220a9] Refcount +1 => 2 at ./perf(maps__insert+0x9a) [0x4bfffa] ./perf(dso__load_sym+0xf89) [0x503509] ./perf(dso__load_vmlinux+0xbf) [0x4aa6df] ./perf(dso__load_vmlinux_path+0x8c) [0x4aa83c] ./perf() [0x50528a] ./perf(convert_perf_probe_events+0xd79) [0x50ac29] ./perf() [0x45600f] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5] ./perf() [0x4220a9] Refcount -1 => 1 at ./perf(map_groups__exit+0x94) [0x4bed04] ./perf(machine__delete+0xb0) [0x4b9300] ./perf(exit_probe_symbol_maps+0x28) [0x506608] ./perf() [0x45628a] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f152368baf5] ./perf() [0x4220a9] This means that the dso__load_sym calls map__new2 and maps_insert, both of them bump the map refcount, but map_groups__exit will drop just one reference. Fix it by dropping the refcount after inserting it into kmaps. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064026.30709.50038.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tools: Make perf_exec_path() always return malloc'd stringMasami Hiramatsu
Since system_path() returns malloc'd string if given path is not an absolute path, perf_exec_path() sometimes returns a static string and sometimes returns a malloc'd string depending on the environment variables or command options. This may cause a memory leak because the caller can not unconditionally free the returned string. This fixes perf_exec_path() and system_path() to always return a malloc'd string, so the caller can always free it. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151119060453.14210.65666.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf machine: Fix to destroy kernel maps when machine exitsMasami Hiramatsu
Actually machine__exit forgot to call machine__destroy_kernel_maps. This fixes some memory leaks on map as below. Without this fix. ---- ./perf probe vfs_read Added new event: probe:vfs_read (on vfs_read) You can now use it in all perf tools, such as: perf record -e probe:vfs_read -aR sleep 1 REFCNT: BUG: Unreclaimed objects found. REFCNT: Total 4 objects are not reclaimed. To see all backtraces, rerun with -v option ---- With this fix. ---- ./perf probe vfs_read Added new event: probe:vfs_read (on vfs_read) You can now use it in all perf tools, such as: perf record -e probe:vfs_read -aR sleep 1 REFCNT: BUG: Unreclaimed objects found. REFCNT: Total 2 objects are not reclaimed. To see all backtraces, rerun with -v option ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064024.30709.43577.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf machine: Fix machine__destroy_kernel_maps to drop vmlinux_maps referencesMasami Hiramatsu
Fix machine__destroy_kernel_maps() to drop vmlinux_maps references before filling it with NULL. Refcnt debugger shows ==== [1] ==== Unreclaimed map: 0x36b1070 Refcount +1 => 1 at ./perf(map__new2+0xb5) [0x4bdec5] ./perf(machine__create_kernel_maps+0x72) [0x4bb152] ./perf(machine__new_host+0xfa) [0x4bb41a] ./perf(init_probe_symbol_maps+0x93) [0x5062d3] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1fc9fc4af5] ./perf() [0x4220a9] Refcount +1 => 2 at ./perf(maps__insert+0x9a) [0x4bfd6a] ./perf(machine__create_kernel_maps+0xc3) [0x4bb1a3] ./perf(machine__new_host+0xfa) [0x4bb41a] ./perf(init_probe_symbol_maps+0x93) [0x5062d3] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1fc9fc4af5] ./perf() [0x4220a9] Refcount -1 => 1 at ./perf(map_groups__exit+0x94) [0x4bea74] ./perf(machine__delete+0x3d) [0x4b91fd] ./perf(exit_probe_symbol_maps+0x28) [0x506378] ./perf() [0x45628a] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f1fc9fc4af5] ./perf() [0x4220a9] map__new2() returns map with refcnt = 1, and also map_groups__insert gets it again in__machine__create_kernel_maps(). machine__destroy_kernel_maps() calls map_groups__remove() to decrement the refcnt, but before decrement it again (corresponding to map__new2), it makes vmlinux_maps[type] = NULL. And this may cause a refcnt leak. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064022.30709.3897.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf machine: Fix machine__findnew_module_map to put registered mapMasami Hiramatsu
Fix machine object to drop the reference to the map object after it inserted it into machine->kmaps. refcnt debugger shows what happened: ---- ==== [2] ==== Unreclaimed map: 0x346f750 Refcount +1 => 1 at ./perf(map__new2+0xb5) [0x4bdea5] ./perf() [0x4b8aaf] ./perf(modules__parse+0xfc) [0x4a9cbc] ./perf() [0x4b83c0] ./perf(machine__create_kernel_maps+0x148) [0x4bb208] ./perf(machine__new_host+0xfa) [0x4bb3fa] ./perf(init_probe_symbol_maps+0x93) [0x5062b3] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5] ./perf() [0x4220a9] Refcount +1 => 2 at ./perf(maps__insert+0x9a) [0x4bfd4a] ./perf() [0x4b8acb] ./perf(modules__parse+0xfc) [0x4a9cbc] ./perf() [0x4b83c0] ./perf(machine__create_kernel_maps+0x148) [0x4bb208] ./perf(machine__new_host+0xfa) [0x4bb3fa] ./perf(init_probe_symbol_maps+0x93) [0x5062b3] ./perf() [0x455ffa] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5] ./perf() [0x4220a9] Refcount -1 => 1 at ./perf(map_groups__exit+0x94) [0x4bea54] ./perf(machine__delete+0x3d) [0x4b91ed] ./perf(exit_probe_symbol_maps+0x28) [0x506358] ./perf() [0x45628a] ./perf(cmd_probe+0x6c) [0x4566bc] ./perf() [0x47abc5] ./perf(main+0x610) [0x421f90] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f5373899af5] ./perf() [0x4220a9] ---- This pattern clearly shows that the refcnt of the map is acquired twice by map__new2 and maps__insert but released onlu once at map_groups__exit, when we purge its maps rbtree. Since maps__insert already reference counted the map, we have to drop the constructor (map__new2) reference count right after inserting it. These happened in machine__findnew_module_map, as below. ---- # eu-addr2line -e ./perf -f 0x4b8aaf machine__findnew_module_map inlined at util/machine.c:1046 in machine__create_module util/machine.c:582 # eu-addr2line -e ./perf -f 0x4b8acb map_groups__insert inlined at util/machine.c:585 in machine__create_module util/map.h:208 ---- (note that both are at util/machine.c:58X which is machine__findnew_module_map) Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064020.30709.40499.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf probe: Fix to free temporal Dwarf_FrameMasami Hiramatsu
Since dwarf_cfi_addrframe returns malloc'd Dwarf_Frame object, it has to be freed after it is used. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151118064011.30709.65674.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf test: Mute test cases error messages if verbose == 0Wang Nan
Sometimes error messages in breaks the pretty output of 'perf test'. For example: # mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak} # perf test LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation :Failed to find the path for kernel: No such file or directory FAILED! This patch mute test cases thoroughly by redirect their stdout and stderr to /dev/null when verbose == 0. After applying this patch: # ./perf test LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : FAILED! # ./perf test -v LLVM BPF 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : --- start --- test child forked, pid 13183 Kernel build dir is set to /lib/modules/4.3.0-rc4+/build set env: KBUILD_DIR=/lib/modules/4.3.0-rc4+/build ... bpf: config 'func=null_lseek file->f_mode offset orig' is ok Looking at the vmlinux_path (7 entries long) Failed to find the path for kernel: No such file or directory bpf_probe: failed to convert perf probe eventsFailed to add events selected by BPF test child finished with -1 ---- end ---- Test BPF filter subtest 1: FAILED! Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-6-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf test: Print result for each BPF subtestWang Nan
This patch prints each sub-tests results for BPF testcases. Before: # ./perf test BPF 37: Test BPF filter : Ok After: # ./perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Ok 37.2: Test BPF prologue generation : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # ./perf test BPF 37: Test BPF filter : 37.1: Test basic BPF filtering : Skip 37.2: Test BPF prologue generation : Skip Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-5-git-send-email-wangnan0@huawei.com [ Fixed up not to use .func in an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf test: Print result for each LLVM subtestWang Nan
Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests, but the result is provided in only one line: # perf test LLVM 35: Test LLVM searching and compiling : Ok This patch introduces sub-tests support, allowing 'perf test' to report result for each sub-tests: # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Ok 35.2: Test kbuild searching : Ok 35.3: Compile source for BPF prologue generation test : Ok When a failure happens: # cat ~/.perfconfig [llvm] clang-path = "/bin/false" # perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : FAILED! 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip And: # rm ~/.perfconfig # ./perf test LLVM 35: Test LLVM searching and compiling : 35.1: Basic BPF llvm compiling test : Skip 35.2: Test kbuild searching : Skip 35.3: Compile source for BPF prologue generation test : Skip Skip by user: # ./perf test -s 1,`seq -s , 3 42` 1: vmlinux symtab matches kallsyms : Skip (user override) 2: detect openat syscall event : Ok ... 35: Test LLVM searching and compiling : Skip (user override) ... Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-4-git-send-email-wangnan0@huawei.com [ Changed so that func is not on an anonymous union ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-19perf tests: Pass the subtest index to each test routineArnaldo Carvalho de Melo
Some tests have sub-tests we want to run, so allow passing this. Wang tried to avoid having to touch all tests, but then, having the test.func in an anonymous union makes the build fail on older compilers, like the one in RHEL6, where: test a = { .func = foo, }; fails. To fix it leave the func pointer in the main structure and pass the subtest index to all tests, end result function is the same, but we have just one function pointer, not two, with and without the subtest index as an argument. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5genj0ficwdmelpoqlds0u4y@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-18perf bpf: Use same BPF program if arguments are identicalWang Nan
This patch allows creating only one BPF program for different 'probe_trace_event'(tev) entries generated by one 'perf_probe_event'(pev) if their prologues are identical. This is done by comparing the argument list of different tev instances, and the maps type of prologue and tev using a mapping array. This patch utilizes qsort to sort the tevs. After sorting, tevs with identical argument lists will be grouped together. Test result: Sample BPF program: #define SEC(NAME) __attribute__((section(NAME), used)) SEC("inlines=no;" "func=SyS_dup? oldfd") int func(void *ctx) { return 1; } It would probe at SyS_dup2 and SyS_dup3, obtaining oldfd as its argument. The following cmdline shows a BPF program being loaded into the kernel by perf: # perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog Before this patch: # perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog [1] 24858 lrwx------ 1 root root 64 Nov 14 04:09 3 -> anon_inode:bpf-prog lrwx------ 1 root root 64 Nov 14 04:09 4 -> anon_inode:bpf-prog ... After this patch: # perf record -e ./test_bpf_arg.c sleep 4 & sleep 1 && ls /proc/$!/fd/ -l | grep bpf-prog [1] 25699 lrwx------ 1 root root 64 Nov 14 04:10 3 -> anon_inode:bpf-prog ... Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-18perf test: Fix 'perf test BPF' when it fails to find a suitable vmlinuxWang Nan
Two bugs in 'perf test BPF' are found when testing BPF prologue without vmlinux: # mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak} # ./perf test BPF 37: Test BPF filter :Failed to find the path for kernel: No such file or directory Ok Test BPF should fail in this case. After this patch: # ./perf test BPF 37: Test BPF filter :Failed to find the path for kernel: No such file or directory FAILED! # mv /lib/modules/4.3.0-rc4+/build/vmlinux{.bak,} # ./perf test BPF 37: Test BPF filter : Ok Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1447749170-175898-2-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-16 03:17:38 +0000