| Age | Commit message (Collapse) | Author |
|---|
|
Add a control 'ping' command to detect if perf is up and its control
interface is operational.
It will be used in following daemon patches to synchronize with record
session - when control interface is up and running, we know that perf
record is monitoring and ready to receive signals.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo ping > control
# cat ack
ack
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding control 'stop' command to stop perf record.
When it is received, perf will set the 'done' variable to 1 to stop its
mmap ring buffer reading loop.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack
terminal 2:
# echo stop > control
terminal 1:
[ perf record: Woken up 7 times to write data ]
[ perf record: Captured and wrote 3.214 MB perf.data (38280 samples) ]
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new 'evlist' control command to display all the evlist events.
When it is received, perf will scan and print current evlist into perf
record terminal.
The interface string for control file is:
evlist [-v|-g|-F]
The syntax follows perf evlist command:
-F Show just the sample frequency used for each event.
-v Show all fields.
-g Show event group information.
Example session:
terminal 1:
# mkfifo control ack
# perf record --control=fifo:control,ack -e '{cycles,instructions}'
terminal 2:
# echo evlist > control
terminal 1:
cycles
instructions
dummy:HG
terminal 2:
# echo 'evlist -v' > control
terminal 1:
cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: \
IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
instructions: size: 120, config: 0x1, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, freq: 1, \
sample_id_all: 1, exclude_guest: 1
dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, \
sample_type: IP|TID|TIME|ID|CPU|PERIOD, read_format: ID, inherit: 1, mmap: 1, \
comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, \
bpf_event: 1
terminal 2:
# echo 'evlist -g' > control
terminal 1:
{cycles,instructions}
dummy:HG
terminal 2:
# echo 'evlist -F' > control
terminal 1:
cycles: sample_freq=4000
instructions: sample_freq=4000
dummy:HG: sample_freq=4000
This new evlist command is handy to get real event names when
wildcards are used.
Adding evsel_fprintf.c object to python/perf.so build, because
it's now evlist.c dependency.
Adding PYTHON_PERF define for python/perf.so compilation, so we
can use it to compile in only evsel__fprintf from evsel_fprintf.c
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding new control events to enable/disable specific event.
The interface string for control file are:
'enable <EVENT NAME>'
'disable <EVENT NAME>'
when received the command, perf will scan the current evlist
for <EVENT NAME> and if found it's enabled/disabled.
Example session:
terminal 1:
# mkfifo control ack perf.pipe
# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:*' -o - > perf.pipe
terminal 2:
# cat perf.pipe | perf --no-pager script -i -
terminal 1:
Events disabled
NOTE Above message will show only after read side of the pipe ('>')
is started on 'terminal 2'. The 'terminal 1's bash does not execute
perf before that, hence the delyaed perf record message.
terminal 3:
# echo 'enable sched:sched_process_fork' > control
terminal 1:
event sched:sched_process_fork enabled
terminal 2:
bash 33349 [034] 149587.674295: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34056
bash 33349 [034] 149588.239521: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34057
terminal 3:
# echo 'enable sched:sched_wakeup_new' > control
terminal 1:
event sched:sched_wakeup_new enabled
terminal 2:
bash 33349 [034] 149632.228023: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34059
bash 33349 [034] 149632.228050: sched:sched_wakeup_new: bash:34059 [120] success=1 CPU:036
bash 33349 [034] 149633.950005: sched:sched_process_fork: comm=bash pid=33349 child_comm=bash child_pid=34060
bash 33349 [034] 149633.950030: sched:sched_wakeup_new: bash:34060 [120] success=1 CPU:036
Committer testing:
If I use 'sched:*' and then enable all events, I can't get 'perf record'
to react to further commands, so I tested it with:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events enabled
Events disabled
And then it works as expected, so we need to fix this pre-existing
problem.
Another issue, we need to check if a event is already enabled or
disabled and change the message to be clearer, i.e.:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
If we receive a 'disable' command, then it should say:
[root@five ~]# perf record --control=fifo:control,ack -D -1 --no-buffering -e 'sched:sched_process_*' -o - > perf.pipe
Events disabled
Events already disabled
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201226232038.390883-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make perf_config_global global, it will be used outside the config.c
object in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make perf_config_system global, it will be used outside the config.c
object in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out the perf_home_perfconfig, that looks for .perfconfig in home
directory including check for PERF_CONFIG_NOGLOBAL and for proper
permission.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow to display time in perf debug output via new
debug_set_display_time function.
It will be used in perf daemon command to get verbose output into log
file.
The debug time format is:
[2020-12-03 18:25:31.822152] affinity: SYS
[2020-12-03 18:25:31.822164] mmap flush: 1
[2020-12-03 18:25:31.822175] comp level: 0
[2020-12-03 18:25:32.002047] mmap size 528384B
Committer notes:
Cast tod.tv_usec to long to avoid this problem:
78 12.70 ubuntu:18.04-x-sparc64 : FAIL sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
util/debug.c: In function 'fprintf_time':
util/debug.c:63:32: error: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type '__suseconds_t {aka int}' [-Werror=format=]
return fprintf(file, "[%s.%06lu] ", date, tod.tv_usec);
~~~~^ ~~~~~~~~~~~
%06u
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add interface to load config set from custom file by using
perf_config_set__load_file function.
It will be used in perf daemon command to process custom config file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's not used outside config.c object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210102220441.794923-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_CODE_PAGE_SIZE.
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-7-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new sort dimension "code_page_size" for common sort.
With this option applied, perf can sort and report by sample's code page
size.
For example:
# perf report --stdio --sort=comm,symbol,code_page_size
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 3K of event 'mem-loads:uP'
# Event count (approx.): 1470769
#
# Overhead Command Symbol Code Page Size IPC [IPC Coverage]
# ........ ....... ............................ .............. ....................
#
69.56% dtlb [.] GetTickCount 4K - -
17.93% dtlb [.] Calibrate 4K - -
11.40% dtlb [.] __gettimeofday 4K - -
#
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-6-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Display sampled code page sizes when PERF_SAMPLE_CODE_PAGE_SIZE was set.
For example:
# perf script --fields comm,event,ip,code_page_size
dtlb mem-loads:uP: 445777 4K
dtlb mem-loads:uP: 40f724 4K
dtlb mem-loads:uP: 474926 4K
dtlb mem-loads:uP: 401075 4K
dtlb mem-loads:uP: 401095 4K
dtlb mem-loads:uP: 401095 4K
dtlb mem-loads:uP: 4010cc 4K
dtlb mem-loads:uP: 440b6f 4K
#
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-5-kan.liang@linux.intel.com
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adds the infrastructure to sample the code address page size.
Introduce a new --code-page-size option for perf record.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Originally-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add option --data-page-size in "perf mem" to record/report data page
size.
Here are some examples:
# perf mem --phys-data --data-page-size report -D
# PID, TID, IP, ADDR, PHYS ADDR, DATA PAGE SIZE, LOCAL WEIGHT, DSRC, SYMBOL
20134 20134 0xffffffffb5bd2fd0 0x016ffff9a274e96a308 0x000000044e96a308 4K 1168 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:perf_ctx_unlock
20134 20134 0xffffffffb63f645c 0xffffffffb752b814 0xcfb52b814 2M 225 0x26a100142 /lib/modules/4.18.0-rc7+/build/vmlinux:_raw_spin_lock
20134 20134 0xffffffffb660300c 0xfffffe00016b8bb0 0x0 4K 0 0x5080144 /lib/modules/4.18.0-rc7+/build/vmlinux:__x86_indirect_thunk_rax
#
# perf mem --phys-data --data-page-size report --stdio
# To display the perf.data header info, please use
# --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 5K of event 'cpu/mem-loads,ldlat=30/P'
# Total weight : 281234
# Sort order :
# mem,sym,dso,symbol_daddr,dso_daddr,tlb,locked,phys_daddr,data_page_size
#
# Overhead Samples Memory access Symbol Shared Object Data Symbol Data Object TLB access Locked Data Physical Address Data Page Size
# ........ ....... ............. ............................ ................ ...................... ........... ............ ...... ...................... ..............
28.54% 1826 L1 or L1 hit [k] __x86_indirect_thunk_rax [kernel.vmlinux] [k] 0xffffb0df31b0ff28 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K
6.02% 256 L1 or L1 hit [.] touch_buffer dtlb [.] 0x00007ffd50109da8 [stack] L1 or L2 hit No [.] 0x000000042454ada8 4K
3.23% 5 L1 or L1 hit [k] clear_huge_page [kernel.vmlinux] [k] 0xffff9a2753b8ce60 [unknown] L1 or L2 hit No [k] 0x0000000453b8ce60 2M
2.98% 4 L1 or L1 hit [k] clear_page_erms [kernel.vmlinux] [k] 0xffffb0df31b0fd00 [unknown] L1 or L2 hit No [k] 0x0000000000000000 4K
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now, "--phys-data" is the only option which impacts the output format.
A simple "if else" is enough to handle the option. But there will be
more options added, e.g. "--data-page-size", which also impact the
output format. The code will become too complex to be maintained.
Divide the big printf into several small pieces. Output the specific
piece only if the related option is applied.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Replace the OCSD_INSTR switch statement with an if to fix compilation
error about unhandled values and avoid this issue again in the future.
Add new OCSD_GEN_TRC_ELEM_SYNC_MARKER and OCSD_GEN_TRC_ELEM_MEMTRANS
enum values to fix unhandled value compilation error. Currently they are
ignored.
Increase the minimum version number to v1.0.0 now that new enum values
are used that are only present in this version.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108142752.27872-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds several local variables:
"cl_output": pointer for outputting single cache line metrics;
"output_str": pointer for outputting cache line metrics;
"sort_str": pointer to the sorting metrics.
This can improve readability for the code and it's more flexible when
later extend to different strings for the output metrics.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-7-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The macro DISPLAY_HITM() is used to calculate HITM percentage introduced
by every node and it's shown for the node info.
This patch introduces the static function display_metrics() to replace
the macro, and the parameters are refined for passing the metric's
statistic and sum value.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For percent() its arguments are defined as integers; this is not
consistent with its consumers which pass u32 arguments.
Thus this patch makes argument type as u32 for percent().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When sorting on the respective metrics (lcl_hitm, rmt_hitm, tot_hitm),
the FILTER_HITM macro is used to filter out the cache line entries if
its overhead is less than 1%.
This patch introduces a static function filter_display() to replace that
macro and refines its parameters with a more flexible way, rather than
passing field name, it changes to pass the cache line's statistic and
sum value.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch has no functionality changes but refactors hist entry
validation for cache line resorting.
It renames function "valid_hitm_or_store()" to "is_valid_hist_entry()",
changes return type from integer type to bool type. In the function,
it uses switch-case instead of ternary operators, which is easier
to extend for more display types.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210114154646.209024-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For shared cache line statistics, 'perf c2c' relies on HITM. We can use
more general naming rather than only binding to HITM, so replace
"hitm_stats" with "shared_clines_stats" in structure perf_c2c, and
rename function resort_hitm_cb() to resort_shared_cl_cb().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210114154646.209024-2-leo.yan@linaro.org
|
|
Introduce 'perf stat -b' option, which counts events for BPF programs, like:
[root@localhost ~]# ~/perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
3.490341825 60,720 ref-cycles
3.490341825 37,797 cycles
4.491540887 37,120 ref-cycles
4.491540887 31,963 cycles
The example above counts 'cycles' and 'ref-cycles' of BPF program of id
254. This is similar to bpftool-prog-profile command, but more
flexible.
'perf stat -b' creates per-cpu perf_event and loads fentry/fexit BPF
programs (monitor-progs) to the target BPF program (target-prog). The
monitor-progs read perf_event before and after the target-prog, and
aggregate the difference in a BPF map. Then the user space reads data
from these maps.
A new 'struct bpf_counter' is introduced to provide a common interface
that uses BPF programs/maps to count perf events.
Committer notes:
Removed all but bpf_counter.h includes from evsel.h, not needed at all.
Also BPF map lookups for PERCPU_ARRAYs need to have as its value receive
buffer passed to the kernel libbpf_num_possible_cpus() entries, not
evsel__nr_cpus(evsel), as the former uses
/sys/devices/system/cpu/possible while the later uses
/sys/devices/system/cpu/online, which may be less than the 'possible'
number making the bpf map lookup overwrite memory and cause hard to
debug memory corruption.
We need to continue using evsel__nr_cpus(evsel) when accessing the
perf_counts array tho, not to overwrite another are of memory :-)
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/lkml/20210120163031.GU12699@kernel.org/
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201229214214.3413833-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When 'perf inject' reads a perf.data file from an older version of perf,
it writes event attributes into the output with the original size field,
but lays them out as if they had the size currently used. Readers see a
corrupt file. Update the size field to match the layout.
Signed-off-by: Al Grant <al.grant@foss.arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.com
Signed-off-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:
Example on system with 8 cpus:
Before:
# echo 0 > /sys/devices/system/cpu/cpu2/online
# ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.147 MB perf.data ]
# ./perf script --itrace=e
Requested CPU 7 too large. Consider raising MAX_NR_CPUS
0x25908 [0x8]: failed to process type: 68 [Invalid argument]
After:
# ./perf script --itrace=e
#
Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of now it doesn't consider cgroups when collecting shadow stats and
metrics so counter values from different cgroups will be saved in a same
slot. This resulted in incorrect numbers when those cgroups have
different workloads.
For example, let's look at the scenario below: cgroups A and C runs same
workload which burns a cpu while cgroup B runs a light workload.
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
3,958,116,522 cycles A
6,722,650,929 instructions A # 2.53 insn per cycle
1,132,741 cycles B
571,743 instructions B # 0.00 insn per cycle
4,007,799,935 cycles C
6,793,181,523 instructions C # 2.56 insn per cycle
1.001050869 seconds time elapsed
When I run 'perf stat' with single workload, it usually shows IPC around
1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A.
But in this case, since cgroups are ignored, cycles are averaged so it
used the lower value for IPC calculation and resulted in around 2.5.
avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066
IPC (A) : 6722650929 / 2655683066 = 2.531
IPC (B) : 571743 / 2655683066 = 0.0002
IPC (C) : 6793181523 / 2655683066 = 2.557
We can simply compare cgroup pointers in the evsel and it'll be NULL
when cgroups are not specified. With this patch, I can see correct
numbers like below:
$ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1
Performance counter stats for 'system wide':
4,171,051,687 cycles A
7,219,793,922 instructions A # 1.73 insn per cycle
1,051,189 cycles B
583,102 instructions B # 0.55 insn per cycle
4,171,124,710 cycles C
7,192,944,580 instructions C # 1.72 insn per cycle
1.007909814 seconds time elapsed
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pass more info to the saved_value in the runtime_stat, add a new
struct runtime_stat_data. Currently it only has 'ctx' field but later
patch will add more.
Note that we intentionally pass 0 as ctx to clock-related events for
compatibility. It was already there in a few places. So move the code
into the saved_value_lookup() explicitly and add a comment.
Suggested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210115071139.257042-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was using some bash-specific features and failed to parse when
running with a different shell like below:
root@kbl-ppc:~/kbl-ws/perf-dev/lck-9077/acme.tmp/tools/perf# ./perf test 83 -vv
83: perf stat metrics (shadow stat) test :
--- start ---
test child forked, pid 3922
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 19: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 24: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 30: ./tests/shell/stat+shadow_stat.sh: [[: not found
(standard_in) 2: syntax error
./tests/shell/stat+shadow_stat.sh: 36: ./tests/shell/stat+shadow_stat.sh: [[: not found
./tests/shell/stat+shadow_stat.sh: 45: ./tests/shell/stat+shadow_stat.sh: declare: not found
test child finished with -1
---- end ----
perf stat metrics (shadow stat) test: FAILED!
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114050609.1258820-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It was looking at bpf/bpf.h, which caused this problem:
# perf trace -e tools/perf/examples/bpf/5sec.c
/home/acme/git/perf/tools/perf/examples/bpf/5sec.c:42:10: fatal error: 'bpf/bpf.h' file not found
#include <bpf/bpf.h>
^~~~~~~~~~~
1 error generated.
ERROR: unable to compile tools/perf/examples/bpf/5sec.c
Hint: Check error message shown above.
Hint: You can also pre-compile it into .o using:
clang -target bpf -O2 -c tools/perf/examples/bpf/5sec.c
with proper -I and -D options.
event syntax error: 'tools/perf/examples/bpf/5sec.c'
\___ Failed to load tools/perf/examples/bpf/5sec.c from source: Error when compiling BPF scriptlet
#
Change that to plain bpf.h, to make it work again:
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
# perf trace -e tools/perf/examples/bpf/5sec.c/max-stack=16/ sleep 5s
0.000 perf_bpf_probe:hrtimer_nanosleep(__probe_ip: -1776891872, rqtp: 5000000000)
hrtimer_nanosleep ([kernel.kallsyms])
common_nsleep ([kernel.kallsyms])
__x64_sys_clock_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__clock_nanosleep_2 (/usr/lib64/libc-2.32.so)
# perf trace -e tools/perf/examples/bpf/5sec.c sleep 4s
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
BPF programs are useful in perf to profile BPF programs.
BPF skeleton is by far the easiest way to write BPF tools. Enable
building BPF skeletons in util/bpf_skel. A dummy bpf skeleton is added.
More bpf skeletons will be added for different use cases.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201229214214.3413833-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
That is, instead of "Lowering default frequency rate to <F>" say
"Lowering default frequency rate from <f> to <F>", specifying the
overridden default frequency <f>, so you don't have to grep through the
source to "remember" that was e.g. 4000.
Signed-off-by: Hans-Peter Nilsson <hp@axis.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201228031908.B049B203B5@pchp3.se.axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add buildid-list support for mmap2's build id data, so we can display
build ids for dso objects for data without the build id cache update.
$ perf buildid-list
1805c738c8f3ec0f47b7ea09080c28f34d18a82b /usr/lib64/ld-2.31.so
d278249792061c6b74d1693ca59513be1def13f2 /usr/lib64/libc-2.31.so
By default only dso objects with hits are shown.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
debug files
Add the --debuginfod option to specify debuginfod URL and support to do
that through config file as well.
Use the following in ~/.perfconfig file:
[buildid-cache]
debuginfod=http://192.168.122.174:8002
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PERF_RECORD_MMAP2 events
Add support to display the build id in PERF_RECORD_MMAP2 events, when
available:
$ perf script --show-mmap-events | head -4
swapper ... @ 0xffffffff81000000 <ff1969b3ba5e43911208bb46fa7d5b1eb809e422>]: ---p [kernel.kallsyms]_text
swapper ... @ 0 <5f62adb730272c9417883ae8b8a8ec224df8cddd>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/firmware/qemu_fw_cfg.ko
swapper ... @ 0 <c9ac6e1dafc1ebdadb048f967854e810706c8bab>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/char/virtio_console.ko
swapper ... @ 0 <86441a4c5b2c2ff5b440682f4c612bd4b426eb5c>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/lib/libcrc32c.ko
$ perf report -D | grep MMAP2 | head -4
0 0 ... @ 0xffffffff81000000 <ff1969b3ba5e43911208bb46fa7d5b1eb809e422>]: ---p [kernel.kallsyms]_text
0 0 ... @ 0 <5f62adb730272c9417883ae8b8a8ec224df8cddd>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/firmware/qemu_fw_cfg.ko
0 0 ... @ 0 <c9ac6e1dafc1ebdadb048f967854e810706c8bab>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/drivers/char/virtio_console.ko
0 0 ... @ 0 <86441a4c5b2c2ff5b440682f4c612bd4b426eb5c>]: ---p /lib/modules/5.9.0-rc5buildid+/kernel/lib/libcrc32c.ko
Adding build id data into <> brackets.
Committer testing:
$ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build
Enabling build id in mmap2 events.
$ perf evlist -v
cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1
$
$ perf script --show-mmap-events | head -4
sleep 274800 2843.556112: PERF_RECORD_MMAP2 274800/274800: [0x564e2fd32000(0x3000) @ 0x2000 <c37cb90b77c79fc719798b066d78ef121285843e>]: r-xp /usr/bin/sleep
sleep 274800 2843.556129: PERF_RECORD_MMAP2 274800/274800: [0x7fa9550d7000(0x21000) @ 0x1000 <fc190f17c4f4dc4a8a26df18eaeed41ecdb2c61b>]: r-xp /usr/lib64/ld-2.32.so
sleep 274800 2843.556140: PERF_RECORD_MMAP2 274800/274800: [0x7ffd8fa96000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown])
$
$ perf buildid-list -i /usr/bin/sleep
c37cb90b77c79fc719798b066d78ef121285843e
$ perf buildid-list -i /usr/lib64/ld-2.32.so
fc190f17c4f4dc4a8a26df18eaeed41ecdb2c61b
And now on a system wide session to check the build ids synthesized for
the kernel and some kernel modules:
# perf record -a --buildid-mmap sleep 2s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.717 MB perf.data ]
# perf script --show-mmap-events | head -4
swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffbb000000(0xe02557) @ 0xffffffffbb000000 <e71ac4b0b0631c27181dab25d63be18dad02feb8>]: ---p [kernel.kallsyms]_text
swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc01dc000(0x6000) @ 0 <36d21515c0b22eb2859b6419a6cdf87ef4cd01c8>]: ---p /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko
swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc01eb000(0x24000) @ 0 <c4fbfea32d0518b3e7879de8deca40ea142bb782>]: ---p /lib/modules/5.11.0-rc1+/kernel/fs/fuse/fuse.ko
swapper 0 [000] 0.000000: PERF_RECORD_MMAP2 -1/0: [0xffffffffc0210000(0x7000) @ 0 <dd6cfb10ae66aa7b1e7b37000a004004be8092e0>]: ---p /lib/modules/5.11.0-rc1+/kernel/drivers/block/zram/zram.ko
# perf buildid-list -h kernel
Usage: perf buildid-list [<options>]
-k, --kernel Show current kernel build id
# perf buildid-list --kernel
e71ac4b0b0631c27181dab25d63be18dad02feb8
# file /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko
/lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko: ELF 64-bit LSB relocatable, x86-64, version 1 (SYSV), BuildID[sha1]=36d21515c0b22eb2859b6419a6cdf87ef4cd01c8, with debug_info, not stripped
# perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/drivers/i2c/i2c-dev.ko
36d21515c0b22eb2859b6419a6cdf87ef4cd01c8
# perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/fs/fuse/fuse.ko
c4fbfea32d0518b3e7879de8deca40ea142bb782
# perf buildid-list -i /lib/modules/5.11.0-rc1+/kernel/drivers/block/zram/zram.ko
dd6cfb10ae66aa7b1e7b37000a004004be8092e0
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add --buildid-mmap option to enable build id in PERF_RECORD_MMAP2 events.
It will only work if there's kernel support for that and it disables
build id cache (implies --no-buildid).
It's also possible to enable it permanently via config option in
~/.perfconfig file:
[record]
build-id=mmap
Also added build_id bit in the verbose output for perf_event_attr:
# perf record --buildid-mmap -vv
...
perf_event_attr:
type 1
size 120
...
build_id 1
Adding also missing text_poke bit.
Committer testing:
$ perf record -h build
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-B, --no-buildid do not collect buildids in perf.data
-N, --no-buildid-cache
do not update the buildid cache
--buildid-all Record build-id of all DSOs regardless of hits
--buildid-mmap Record build-id in map events
$
$ perf record --buildid-mmap sleep 1
Failed: no support to record build id in mmap events, update your kernel.
$
After adding the needed kernel bits in a test kernel:
$ perf record -vv --buildid-mmap sleep 1 |& grep -m1 build
Enabling build id in mmap2 events.
$ perf evlist -v
cycles:u: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, build_id: 1
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PERF_RECORD_MMAP2
Adding build id to synthesized mmap2 events for everything -
kernel/modules/tasks, when symbol_conf.buildid_mmap2 is true.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow using PERF_RECORD_MMAP2 to synthesize the kernel modules maps so
that we can use PERF_RECORD_MMAP2 to encode the kernel modules build ids
in the following csets.
It's enabled by a new symbol_conf.buildid_mmap2 bool field, which will
be switchable in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow using PERF_RECORD_MMAP2 to synthesize the kernel map so that we
can use PERF_RECORD_MMAP2 to encode the kernel build id in the following
csets.
It's enabled by a new symbol_conf.buildid_mmap2 bool field, which will
be switchable in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When processing a PERF_RECORD_MMAP2 metadata event, check on the build
id misc bit: PERF_RECORD_MISC_MMAP_BUILD_ID and if it is set, store the
build id in mmap's dso object.
Also adding the build id data to struct perf_record_mmap2 event
definition.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the PERF_RECORD_MISC_MMAP_BUILD_ID misc bit is set, mmap2 events
carries a build id, placed in the following union:
union {
struct {
u32 maj;
u32 min;
u64 ino;
u64 ino_generation;
};
struct {
u8 build_id_size;
u8 __reserved_1;
u16 __reserved_2;
u8 build_id[20];
};
};
In this case we can't swap above fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201214105457.543111-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now the two OP formats are used for SDT marker argument in Arm64 ELF,
one format is general register xNUM (e.g. x1, x2, etc), another is for
using stack pointer to access local variables (e.g. [sp], [sp, 8]).
This patch adds support SDT marker argument for Arm64, it parses OP and
converts to uprobe compatible format.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20201225052751.24513-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arm64 ELF section '.note.stapsdt' uses string format "-4@[sp, NUM]" if
the probe is to access data in stack, e.g. below is an example for
dumping Arm64 ELF file and shows the argument format:
Arguments: -4@[sp, 12] -4@[sp, 8] -4@[sp, 4]
Comparing against other archs' argument format, Arm64's argument
introduces an extra space character in the middle of square brackets,
due to argv_split() uses space as splitter, the argument is wrongly
divided into two items.
To support Arm64 SDT, this patch fixes up for this case, if any item
contains sub string "[sp", concatenates the two continuous items. And
adds the detailed explaination in comment.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20201225052751.24513-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The argv_split() function must be paired with argv_free(), else we must
keep a reference to the argv array received or do the freeing ourselves,
in synthesize_sdt_probe_command() we were simply leaking that argv[]
array.
Fixes: 3b1f8311f6963cd1 ("perf probe: Add sdt probes arguments into the uprobe cmd string")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Truong <alexandre.truong@arm.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: He Zhe <zhe.he@windriver.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201224135139.GF477817@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A separate field isn't strictly required. The core field could be
re-used for thread IDs as a single field was used previously.
But separating them will avoid confusion and catch potential errors
where core IDs are read as thread IDs and vice versa.
Also remove the placeholder id field which is now no longer used.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-13-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add core as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-12-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add die as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-11-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add socket as a separate member so that it doesn't have to be packed
into the int value.
When the socket ID was larger than 8 bits the output appeared corrupted
or incomplete.
For example, here on ThunderX2 'perf stat' reports a socket of -1 and an
invalid die number:
./perf stat -a --per-die
The socket id number is too big.
Performance counter stats for 'system wide':
S-1-D255 128 687.99 msec cpu-clock # 57.240 CPUs utilized
...
S36-D0 128 842.34 msec cpu-clock # 70.081 CPUs utilized
...
And with --per-core there is an entry with an invalid core ID:
./perf stat record -a --per-core
The socket id number is too big.
Performance counter stats for 'system wide':
S-1-D255-C65535 128 671.04 msec cpu-clock # 54.112 CPUs utilized
...
S36-D0-C0 4 28.27 msec cpu-clock # 2.279 CPUs utilized
...
This fixes the "Session topology" self test on ThunderX2.
After this fix the output contains the correct socket and die IDs and no
longer prints a warning about the size of the socket ID:
./perf stat --per-die -a
Performance counter stats for 'system wide':
S36-D0 128 169,869.39 msec cpu-clock # 127.501 CPUs utilized
...
S3612-D0 128 169,733.05 msec cpu-clock # 127.398 CPUs utilized
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-10-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add node as a separate member so that it doesn't have to be packed into
the int value.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the new cpu_aggr_id struct in the cpu map instead of int so that it
can store more data.
No functional changes.
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20201126141328.6509-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
