| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Don't exit if used this way:
sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat
note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Print the per core thermal throttle count so as to get suffificent thermal
context.
turbostat -i 5 -s Core,CPU,CoreThr
Core CPU CoreThr
- - 104
0 0 61
0 4
1 1 0
1 5
2 2 104
2 6
3 3 7
3 7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This gives the ability to reprint the header every N iterations, so you
can ensure that a scrolling display always has the header visible
somewhere on the screen.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Currently, there are a number of variables which are displayed by
default, enabled with -e all, and listed by --list, but which you can
not give to --enable/-e.
So you can enable CPU0c1 (in the bic array), but you can't enable C1 or
C1% (not in the bic array, but exists in sysfs).
This runs counter to both the documentation and user expectations, and
it's just not very user friendly.
As such, the mechanism used by --hide has been duplicated, and is now
also used by --enable, so we can handle unknown names gracefully.
Note: One impact of this is that truly unknown fields given to --enable
will no longer generate errors, they will be silently ignored, as --hide
does.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Print power values upto three decimal places in watts.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add Power Limit4 support.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat --Dump exits early with status 243 (-13)
get_counters() calls get_msr_sum() on zen CPUS
for MSR_PKG_ENERGY_STAT, but per_cpu_msr_sum
has not been initialized.
Signed-off-by: Dan Merillat <git@dan.eginity.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
allow invocations such as # turbostat --show power,Busy%
previously the "Busy%" was ignored
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
'MSR_PKG_CST_CONFIG_CONTROL' encodes the deepest allowed package C-state limit,
and turbostat decodes it.
Before this patch: turbostat does not recognize value "3" on Ice Lake Xeon
(ICX) and Sapphire Rapids Xeon (SPR), treats it as "unknown", and does not
display any package C-states in the results table.
After this patch: turbostat recognizes value 3 on ICX and SPR, treats it as
"PC6", and correctly displays package C-states in the results table.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As idle, in particular, can have many columns on some machines...
Make it easy to ignore them all at once.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This makes interval mode less likely to see delayed
results on a heavily loaded system.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Spring is here...
run a long overdue Lendent on turbostat.c
no functional change
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
There are two TCC activation temeprature.
One is the default TCC activation temperature, also known as TJ_MAX.
Another one is the effective TCC activation temperature, which is the
subtraction of default TCC activation temperature and TCC offset.
The name of variable tcc_activation_temp might be misleading here.
Thus rename tcc_activation_temp to tj_max, and use tcc_default and
tcc_offset to calculate the effective TCC activation temperature.
No functional change in this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The length of TCC Offset bits varies on different platforms.
Decode TCC Offset bits only for the platforms that we have verified.
For the others, only show default TCC activation temperature.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
CPU model may get changed in intel_model_duplicates() for code reuse.
But there are still some cases we need the original CPU model to handle
minor differences between generations.
Thus save the original CPU model.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
For Atom CPUs that have core cstate deeper than C6,
MSR_CORE_C6_RESIDENCY actually returns the residency for both CC6 and
deeper Core cstates.
Thus, the real Core C6 residency should be the subtraction of
MSR_CORE_C6_RESIDENCY return value and MSR_CORE_C6_RESIDENCY return value.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
C-state pre-wake setting[1] is an optimization for some Intel CPUs to
be woken up from deep C-states in order to reduce latency. According to
the spec, the BIT30 is the C-state Pre-wake Disable. Expose this setting
accordingly.
Sample output from turbostat:
...
cpu51: MSR_IA32_POWER_CTL: 0x1a00a40059 (C1E auto-promotion: DISabled)
C-state Pre-wake: ENabled
cpu51: MSR_TURBO_RATIO_LIMIT: 0x2021212121212224
...
[1] https://intel.github.io/wult/#c-state-pre-wake
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It was found that on Elkhart Lake the TSC frequency is driven by
a separate crystal-clock domain, which is different from the
BCLK domain which includes mperf. This has result in small different
speed thus inconsistence between TSC and the mperf, which caused the
Busy% to be higher than 100%. On this platform it seems that the mperf
runs faster than tsc when the CPU is 100% utilized:
delta tsc(18815473183) < delta mperf(18958403680) for 10 seconds.
To align TSC with mperf, leverage the tsc_tweak mechanism introduced for
cores newer than Skylake, so that TSC and mperf would be calculated in
the same domain.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Do not mark a comment as kernel-doc notation when it is not
meant to be in kernel-doc notation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Currently the turbostat treats ICX the same way as SKX and shares the
code among them. But one difference is that ICX does not support Package
C6 Retention, unlike SKX and CLX.
So this patch:
1. Splitting SKX and ICX in turbostat.
2. Removing Package C6 Rentention for ICX.
And after this split, it would be easier to cutomize Ice Lake Server
in turbostat in the future.
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The idx_to_offset() function returns type int (32-bit signed), but
MSR_PKG_ENERGY_STAT is u32 and would be interpreted as a negative number.
The end result is that it hits the if (offset < 0) check in update_msr_sum()
which prevents the timer callback from updating the stat in the background when
long durations are used. The similar issue exists in offset_to_idx() and
update_msr_sum(). Fix this issue by converting the 'int' to 'off_t' accordingly.
Fixes: 9972d5d84d76 ("tools/power turbostat: Enable accumulate RAPL display")
Signed-off-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It was reported that on Zen+ system turbostat started exiting,
which was tracked down to the MSR_PKG_ENERGY_STAT read failing because
offset_to_idx wasn't returning a non-negative index.
This patch combined the modification from Bingsong Si and
Bas Nieuwenhuizen and addd the MSR to the index system as alternative for
MSR_PKG_ENERGY_STATUS.
Fixes: 9972d5d84d76 ("tools/power turbostat: Enable accumulate RAPL display")
Reported-by: youling257 <youling257@gmail.com>
Tested-by: youling257 <youling257@gmail.com>
Tested-by: Kurt Garloff <kurt@garloff.de>
Tested-by: Bingsong Si <owen.si@ucloud.cn>
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Co-developed-by: Bingsong Si <owen.si@ucloud.cn>
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
|
|
SKX uses fixed DRAM Energy Unit, just like HSX and BDX.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
This reverts commit 6ff7cb371c4bea3dba03a56d774da925e78a5087.
Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.
(on most systems, TCC offset is 0, FWIW)
Fixes: 6ff7cb371c4b
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Ice Lake D is low-end server version of Ice Lake X, reuse
the code accordingly.
Tested-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Share the code between Alder Lake Mobile and Alder Lake Desktop.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
(also available via "grep microcode /proc/cpuinfo")
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Use linux-perf to access the hardware instructions-retired counter.
This is necessary because the counter is not enabled by default,
and also the counter is prone to roll-over -- both of which
perf manages.
It is not necessary to use perf for the cycle counter,
because turbostat already needs to collect delta-aperf
to calcuate frequency.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Commit
6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
converted turbostat to read the energy_perf_bias value from sysfs.
However, older kernels which do not have that file yet, would fail. For
those, fall back to the MSR reading.
Fixes: 6d6501d912a9 ("tools/power/turbostat: Read energy_perf_bias from sysfs")
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://lkml.kernel.org/r/20210127132444.981120-1-dedekind1@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
"The main part of this branch is the ongoing fight against windmills in
an attempt to have userspace tools not poke at naked MSRs.
This round deals with MSR_IA32_ENERGY_PERF_BIAS and removes direct
poking into it by our in-tree tools in favor of the proper
"energy_perf_bias" sysfs interface which we already have.
In addition, the msr.ko write filtering's error message points to a
new summary page which contains the info we collected from helpful
reporters about which userspace tools write MSRs:
https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about
along with the current status of their conversion.
The rest is the usual small fixes and improvements"
* tag 'x86_misc_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/msr: Add a pointer to an URL which contains further details
x86/pci: Fix the function type for check_reserved_t
selftests/x86: Add missing .note.GNU-stack sections
selftests/x86/fsgsbase: Fix GS == 1, 2, and 3 tests
x86/msr: Downgrade unrecognized MSR message
x86/msr: Do not allow writes to MSR_IA32_ENERGY_PERF_BIAS
tools/power/x86_energy_perf_policy: Read energy_perf_bias from sysfs
tools/power/turbostat: Read energy_perf_bias from sysfs
tools/power/cpupower: Read energy_perf_bias from sysfs
MAINTAINERS: Cleanup SGI-related entries
|
|
... instead of poking at the MSR directly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Link: https://lkml.kernel.org/r/20201029190259.3476-3-bp@alien8.de
|
|
goodbye summer...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat tends to get confused when CPUs are added and removed
while it is running.
There are races, such as checking the current cpu, and then
reading a sysfs file that depends on that cpu number.
Close the two issues that seem to come up the most.
First, there is an infinite reset loop detector --
change that to allow more resets before giving up.
Secondly, one of those file reads didn't really need
to exit the program on failure...
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cpu1: MSR_IA32_TEMPERATURE_TARGET: 0x05640000 (95 C) (100 default - 5 offset)
Account for the new "offset" field in MSR_TEMPERATURE_TARGET.
While this field is usually zero, ignoring it results in over-stating
the current temperature, both per-core and per-package.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
For compatibility reasons, Glibc off_t is a 32-bit type on 32-bit x86
unless _FILE_OFFSET_BITS=64 is defined. Add this define, as otherwise
reading MSRs with index 0x80000000 and above attempts a pread with a
negative offset, which fails.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Tested-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Family 19h processors have the same RAPL (Running average power limit)
hardware register interface as Family 17h processors.
Change the family checks to succeed for Family 17h and above to enable
core and package energy measurement on Family 19h machines.
Also update the TDP to the largest found at the bottom of the page at
amd.com->processors->servers->epyc->2nd-gen-epyc, i.e., the EPYC 7H12.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Jacobsville doesn't have Package C2 and C6. Also
Core and DRAM RAPL are not available. Adjust output
accordingly.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The column already present called GFXMHz reads from gt_cur_freq_mhz,
which represents the GT frequency that was requested, but power
management might not be able to do that. So the new column will display
what the actual frequency GT is running at.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Like we skip PC3 and PC6 columns when the package C-state limit
disables them, skip PC8/PC9/CP10 under analogous conditions.
Reported-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Initial support for models recently added to intel-family.h.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat formatting is broken with ACPI CST for enumeration. The
problem is that the CX_ACPI% is eight characters long which does not
work with tab formatting. One simple solution is to remove the underbar
from the state name such that C1_ACPI will be displayed as C1ACPI.
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Disabling cpu 0 results in an error
turbostat: /sys/devices/system/cpu/cpu0/topology/thread_siblings: open failed: No such file or directory
Use sched_getcpu() instead of a hardcoded cpu 0 to get the max cpu number.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Enable the accumulated RAPL display by default.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
