| Age | Commit message (Collapse) | Author |
|---|
|
Remove the duplicate dup() invocation.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add handling for open() failure case to make sure a valid file
descriptor is passed to dup().
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
variable 'non_block' is always 0, thus remove the variable and the
handling for "non_block != 0" case.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
struct isst_id *id is a pointer, comparing it with less than zero is wrong.
The check is there to make sure the id->pkg and id->die is set to -1, when
it is illegal or unavailable. Here comparing with MAX_PACKAGE_COUNT and
MAX_DIE_PER_PACKAGE is sufficient.
Hence remove the wrong check.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[srinivas.pandruvada@linux.intel.com: Subject and changelog edits]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few scripts in tools/power still refer to this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
|
|
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Intel Xeon servers used to use a fixed energy resolution (15.3uj) for
Dram RAPL domain. But on SPR, Dram RAPL domain follows the standard
energy resolution as described in MSR_RAPL_POWER_UNIT.
Remove the SPR rapl_dram_energy_units quirk.
Fixes: e7af1ed3fa47 ("tools/power turbostat: Support additional CPU model numbers")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Do not dump turbo ratio limits if platform does not support turbo, because it
is confusing and the TRL MSRs may even include misleading information. And they
are not supposed to be relied on if turbo is not supported.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add turbostat support for MeteorLake platforms, which behave the same
as RaptorLake platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add turbostat support for RAPTORLAKE_S platform, which behaves the same
as RAPTORLAKE and RAPTORLAKE_P platforms.
RPL-S 601/801 have different CPU ID than the Hybrid ADL-S platforms.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Update version number.
This version includes fixes for:
- fix build failure when using gcc options -Wl,--as-needed
- Fix warning for perf_cap.cpu may be uninitialized
- Fix off by one check for MAX_DIE_PER_PACKAGE
- Fix issue with use of get_physical_die_id instead of
get_physical_die_id
Optimizations:
- Removed unused interfaces and functions
- Better handle package, die, cpu combination by
defining a struct and set at one place instead
at each user level.
New functional change:
- Warn if turbo is disabled and SST turbo-freq feature is requested
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Optimize CPU initialization.
Do cpu related initialization in one function, including setting the cpu
present_cpumask, target_cpumask, and cpu_map and core_count arrays.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
cpu_map already has the cpu package id, die id information.
Thus there is no need to re-evaluating sysfs attributes or stored data
file to get the package id and die id of a given CPU each time.
In order to unitlize this, cpu_map needs to be created unconditionally.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
pkg_id/die_id can be retrieved from struct isst_id, remove the redundant
clos_config->pkg_id/die_id fields.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Enforce the pkg/die value in struct isst_id are either -1 or a valid
value.
This helps avoid inconsistent or redundant checks.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Now, all the get_physical_pkg/die/core_id() users are inside
isst-config.c, so no need to export these APIs.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
struct isst_id contains cpu, package and die info, and it can represent
a specific SST power domain.
Introduce is_cpu_in_power_domain() helper to identify if a cpu is in a
specified power_domain.
And cleanup the code to use the new helper.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
struct isst_id already contains package and die id information, thus
there is no need to get the package and die id information, when struct
isst_id is already available.
Remove unneeded get_physical_package_id/get_physical_die_id usage.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
With pkg and die info added into struct isst_id, more functions can
be converted to use struct isst_id as parameter.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Code uses pkg_id and die_id to refer to a specific power domain.
The pkg/die information is already settled at start time. Adding package
id and die id information into struct isst_id so that code does not need
to retrieve them at runtime.
More code cleanups can be done with the package/die info available.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
SST control is power-domain based rather than cpu based, on all the
systems including Sapphire Rapids and ealier.
SST core APIs uses cpu id as parameter, and use the underlying pkg_id and
die_id information to find a power domain, this is not straight forward
and introduces obscure logics in the code.
Introduce struct isst_id to represent a SST Power Domain.
All core APIs are converted to use struct isst_id as parameter instead of
using cpu id.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Remove unused core_mask array.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
Remove dead code.
Not functional change in this patch
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
In the function isst_ctdp_display_information(), call to the function
get_cpu_count() is using get_physical_die_id() instead of
get_physical_package_id(). This will result in wrong display of
CPU count in that level.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ Srinivas Pandruvada: fixed subject and change log ]
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
|
|
update version number
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The ACC (automatic C-state conversion) feature was available on Sky Lake and
Cascade Lake Xeons (SKX and CLX), but it is not available on Ice Lake and
Sapphire Rapids Xeons (ICX and SPR). Therefore, stop decoding it for ICX and
SPR.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Sapphire Rapids Xeon (SPR) supports 2 flavors of PC6 - PC6N (non-retention) and
PC6R (retention). Before this patch we used ICX package C-state limits, which
was wrong, because ICX has only one PC6 flavor. With this patch, we use SKX PC6
limits for SPR, because they are the same.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
The 'automatic_cstate_conversion_probe()' function has a too long 'if'
statement, convert it to a 'switch' statement in order to improve code
readability a bit.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Before this patch, SPR platform was considered identical to ICX platform. This
patch separates SPR support from ICX.
This patch is a preparation for adding SPR-specific package C-state limits
support.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
remove duplicate "the" in comment
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for Raptorlake model
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add support for ALDERLAKE_N platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Intel Performance Hybrid processors have a 2nd MSR
describing the turbo limits enforced on the Ecores.
Note, TRL and Secondary-TRL are usually R/O information,
but on overclock-capable parts, they can be written.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
code cleanup only.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
CPUID leaf 7 EDX now tells us if the processor has hybrid CPUs
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Update turbostat.8 to reflect new uncore frequency output (UncMHz)
Also, refresh examples.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
When CONFIG_INTEL_UNCORE_FREQ_CONTROL is effective,
(Linux 5.9 and later), print the current (and default)
min and max uncore frequency limits.
When that driver provides the current uncore frequency
(Linux 5.18 and later), print a UncMHz column
reflecting the current uncore frequency.
Note that UncMHz is an instantaneous sample, not an average.
eg.
$ sudo ./turbostat -S --show frequency
...
Uncore Frequency pkg0 die0: 800 - 3900 MHz (800 - 3900 MHz)
...
Avg_MHz Busy% Bzy_MHz TSC_MHz UncMHz
28 0.70 4049 3095 3900
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Currently if a fscanf fails then an early return leaks an open
file pointer. Fix this by fclosing the file before the return.
Detected using static analysis with cppcheck:
tools/power/x86/turbostat/turbostat.c:2039:3: error: Resource leak: fp [resourceLeak]
Fixes: eae97e053fe3 ("tools/power turbostat: Support thermal throttle count print")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Using strncmp for a single character comparison is overly complicated,
just use a simpler single character comparison instead. Also stops
static analyzers (such as cppcheck) from complaining about strncmp on
non-null terminated strings.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It would be handy to have cmdline in turbostat output. For example,
according to the turbostat output, there are no C-states requested.
In this case the user is very curious if something like
intel_idle.max_cstate=0 was used, or may be idle=none too. It is
also curious whether things like intel_pstate=nohwp were used.
Print the boot command line accordingly:
turbostat version 21.05.04 - Len Brown <lenb@kernel.org>
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.16.0+ root=UUID=
b42359ed-1e05-42eb-8757-6bf2a1c19070 ro quiet splash vt.handoff=7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
RaptorLake is compatible with AlderLake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Remove an unneeded semicolon.
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Change > MAX_DIE_PER_PACKAGE to >= MAX_DIE_PER_PACKAGE to prevent
accessing one element beyond the end of the array.
Fixes: 7fd786dfbd2c ("tools/power/x86/intel-speed-select: OOB daemon mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for 'artificial' Energy Models in which power
numbers for different entities may be in different scales, add support
for some new hardware, fix bugs and clean up code in multiple places.
Specifics:
- Update the Energy Model support code to allow the Energy Model to
be artificial, which means that the power values may not be on a
uniform scale with other devices providing power information, and
update the cpufreq_cooling and devfreq_cooling thermal drivers to
support artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add CPU-based scaling support to passive devfreq governor (Saravana
Kannan, Chanwoo Choi).
- Update the rk3399_dmc devfreq driver (Brian Norris).
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz
Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
- Add AlderLake processor support to the intel_idle driver (Zhang
Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
- Fix cpufreq governor clean up code to avoid using kfree() directly
to free kobject-based items (Kevin Hao).
- Prepare cpufreq for powerpc's asm/prom.h cleanup (Christophe
Leroy).
- Make intel_pstate notify frequency invariance code when no_turbo is
turned on and off (Chen Yu).
- Add Sapphire Rapids OOB mode support to intel_pstate (Srinivas
Pandruvada).
- Make cpufreq avoid unnecessary frequency updates due to mismatch
between hardware and the frequency table (Viresh Kumar).
- Make remove_cpu_dev_symlink() clear the real_cpus mask to simplify
code (Viresh Kumar).
- Rearrange cpufreq_offline() and cpufreq_remove_dev() to make the
calling convention for some driver callbacks consistent (Rafael
Wysocki).
- Avoid accessing half-initialized cpufreq policies from the show()
and store() sysfs functions (Schspa Shi).
- Rearrange cpufreq_offline() to make the calling convention for some
driver callbacks consistent (Schspa Shi).
- Update CPPC handling in cpufreq (Pierre Gondois).
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
- Update the turbostat utility to version 2022.04.16 (Len Brown, Dan
Merillat, Sumeet Pawnikar, Zephaniah E. Loss-Cutler-Hull, Chen Yu)"
* tag 'pm-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (94 commits)
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
powercap: intel_rapl: remove redundant store to value after multiply
cpufreq: CPPC: Enable dvfs_possible_from_any_cpu
cpufreq: CPPC: Enable fast_switch
ACPI: CPPC: Assume no transition latency if no PCCT
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
ACPI: CPPC: Check _OSC for flexible address space
...
|
|
Merge power management tools updates for 5.19-rc1:
- Update turbostat to version 2022.04.16 including the following
changes:
* No build warnings with -Wextra (Len Brown).
* Tweak --show and --hide capability (Len Brown).
* Be more useful as non-root (Len Brown).
* Fix ICX DRAM power numbers (Len Brown).
* Fix dump for AMD cpus (Dan Merillat).
* Add Power Limit4 support (Sumeet Pawnikar).
* Print power values upto three decimal (Sumeet Pawnikar).
* Allow -e for all names (Zephaniah E. Loss-Cutler-Hull).
* Allow printing header every N iterations (Zephaniah E.
Loss-Cutler-Hull).
* Support thermal throttle count print (Chen Yu).
* pm-tools:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
|
|
Initialize perf_cap struct to avoid warning:
CC hfi-events.o
In function ‘process_hfi_event’,
inlined from ‘handle_event’ at hfi-events.c:220:5:
hfi-events.c:184:9: warning: ‘perf_cap.cpu’ may be used
uninitialized [-Wmaybe-uninitialized]
184 | process_level_change(perf_cap->cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
hfi-events.c: In function ‘handle_event’:
hfi-events.c:193:25: note: ‘perf_cap.cpu’ was declared here
193 | struct perf_cap perf_cap;
| ^~~~~~~~
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220511171208.211319-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
For Intel SST turbo-freq feature to be enabled, the turbo mode on the
platform must be enabled also. If turbo mode is disabled, display error
while enabling turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220510023421.3930540-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat changes for 5.19 from Len Brown:
"Chen Yu (1):
tools/power turbostat: Support thermal throttle count print
Dan Merillat (1):
tools/power turbostat: fix dump for AMD cpus
Len Brown (5):
tools/power turbostat: tweak --show and --hide capability
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: be more useful as non-root
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: version 2022.04.16
Sumeet Pawnikar (2):
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: print power values upto three decimal
Zephaniah E. Loss-Cutler-Hull (2):
tools/power turbostat: Allow -e for all names.
tools/power turbostat: Allow printing header every N iterations"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.04.16
tools/power turbostat: No build warnings with -Wextra
tools/power turbostat: be more useful as non-root
tools/power turbostat: fix ICX DRAM power numbers
tools/power turbostat: Support thermal throttle count print
tools/power turbostat: Allow printing header every N iterations
tools/power turbostat: Allow -e for all names.
tools/power turbostat: print power values upto three decimal
tools/power turbostat: Add Power Limit4 support
tools/power turbostat: fix dump for AMD cpus
tools/power turbostat: tweak --show and --hide capability
|
