| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e932 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
|
|
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
number is invalid
syzbot reported out-of-bounds read in check_atomic_load/store() when the
register number is invalid in this context:
https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
To avoid the issue from now on, let's add tests where the register number
is invalid for load-acquire/store-release.
After discussion with Eduard, I decided to use R15 as invalid register
because the actual slab-out-of-bounds read issue occurs when the register
number is R12 or larger.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-6-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
syzbot reported the following splat [0].
In check_atomic_load/store(), register validity is not checked before
atomic_ptr_type_ok(). This causes the out-of-bounds read in is_ctx_reg()
called from atomic_ptr_type_ok() when the register number is MAX_BPF_REG
or greater.
Call check_load_mem()/check_store_reg() before atomic_ptr_type_ok()
to avoid the OOB read.
However, some tests introduced by commit ff3afe5da998 ("selftests/bpf: Add
selftests for load-acquire and store-release instructions") assume
calling atomic_ptr_type_ok() before checking register validity.
Therefore the swapping of order unintentionally changes verifier messages
of these tests.
For example in the test load_acquire_from_pkt_pointer(), expected message
is 'BPF_ATOMIC loads from R2 pkt is not allowed' although actual messages
are different.
validate_msgs:FAIL:754 expect_msg
VERIFIER LOG:
=============
Global function load_acquire_from_pkt_pointer() doesn't return scalar. Only those are supported.
0: R1=ctx() R10=fp0
; asm volatile ( @ verifier_load_acquire.c:140
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx() R2_w=pkt(r=0)
1: (d3) r0 = load_acquire((u8 *)(r2 +0))
invalid access to packet, off=0 size=1, R2(id=0,off=0,r=0)
R2 offset is outside of the packet
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
=============
EXPECTED SUBSTR: 'BPF_ATOMIC loads from R2 pkt is not allowed'
#505/19 verifier_load_acquire/load-acquire from pkt pointer:FAIL
This is because instructions in the test don't pass check_load_mem() and
therefore don't enter the atomic_ptr_type_ok() path.
In this case, we have to modify instructions so that they pass the
check_load_mem() and trigger atomic_ptr_type_ok().
Similarly for store-release tests, we need to modify instructions so that
they pass check_store_reg().
Like load_acquire_from_pkt_pointer(), modify instructions in:
load_acquire_from_sock_pointer()
store_release_to_ctx_pointer()
store_release_to_pkt_pointer()
Also in store_release_to_sock_pointer(), check_store_reg() returns error
early and atomic_ptr_type_ok() is not triggered, since write to sock
pointer is not possible in general.
We might be able to remove the test, but for now let's leave it and just
change the expected message.
[0]
BUG: KASAN: slab-out-of-bounds in is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
BUG: KASAN: slab-out-of-bounds in atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
Read of size 4 at addr ffff888141b0d690 by task syz-executor143/5842
CPU: 1 UID: 0 PID: 5842 Comm: syz-executor143 Not tainted 6.14.0-rc3-syzkaller-gf28214603dc6 #0
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x16e/0x5b0 mm/kasan/report.c:521
kasan_report+0x143/0x180 mm/kasan/report.c:634
is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
check_atomic_store kernel/bpf/verifier.c:7804 [inline]
check_atomic kernel/bpf/verifier.c:7841 [inline]
do_check+0x89dd/0xedd0 kernel/bpf/verifier.c:19334
do_check_common+0x1678/0x2080 kernel/bpf/verifier.c:22600
do_check_main kernel/bpf/verifier.c:22691 [inline]
bpf_check+0x165c8/0x1cca0 kernel/bpf/verifier.c:23821
Reported-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
Tested-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Fixes: e24bbad29a8d ("bpf: Introduce load-acquire and store-release instructions")
Fixes: ff3afe5da998 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-5-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There are scenarios where env.{sub,}test_state->stdout_saved, can be
NULL, e.g. sometimes when the watchdog timeout kicks in, or if the
open_memstream syscall is not available.
Avoid crashing test_progs by adding an explicit NULL check prior the
fclose() call.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250318081648.122523-1-bjorn@kernel.org
|
|
test_xdp_vlan.sh isn't used by the BPF CI.
Migrate test_xdp_vlan.sh in prog_tests/xdp_vlan.c.
It uses the same BPF programs located in progs/test_xdp_vlan.c and the
same network topology.
Remove test_xdp_vlan*.sh and their Makefile entries.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-2-7d29847169af@bootlin.com/
|
|
The __load() helper expects BPF sections to be names 'xdp' or 'tc'
Rename BPF sections so they can be loaded with the __load() helper in
upcoming patch.
Rename the BPF functions with their previous section's name.
Update the 'ip link' commands in the script to use the program name
instead of the section name to load the BPF program.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-1-7d29847169af@bootlin.com
|
|
Introduce selftests that trigger AA, ABBA deadlocks, and test the edge
case where the held locks table runs out of entries, since we then
fallback to the timeout as the final line of defense. Also exercise
verifier's AA detection where applicable.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-26-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The reuslt:
$ tools/testing/selftests/bpf/test_progs --name=fexit_noreturns
#99/1 fexit_noreturns/noreturns:OK
#99 fexit_noreturns:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20250318114447.75484-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftests to verify that it is possible to load freplace program
from user namespace if BPF token is initialized by bpf_object__prepare
before calling bpf_program__set_attach_target.
Negative test is added as well.
Modified type of the priv_prog to xdp, as kprobe did not work on aarch64
and s390x.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250317174039.161275-5-mykyta.yatsenko5@gmail.com
|
|
The SO_RCVLOWAT option is defined as 18 in the selftest header,
which matches the generic definition. However, on powerpc,
SO_RCVLOWAT is defined as 16. This discrepancy causes
sol_socket_sockopt() to fail with the default switch case on powerpc.
This commit fixes by defining SO_RCVLOWAT as 16 for powerpc.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311084647.3686544-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8be3 ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Venkat reported a compilation error for BPF selftests on PowerPC [0].
The crux of the error is the following message:
In file included from progs/arena_spin_lock.c:7:
/root/bpf-next/tools/testing/selftests/bpf/bpf_arena_spin_lock.h:122:8:
error: member reference base type '__attribute__((address_space(1)))
u32' (aka '__attribute__((address_space(1))) unsigned int') is not a
structure or union
122 | old = atomic_read(&lock->val);
This is because PowerPC overrides the qspinlock type changing the
lock->val member's type from atomic_t to u32.
To remedy this, import the asm-generic version in the arena spin lock
header, name it __qspinlock (since it's aliased to arena_spinlock_t, the
actual name hardly matters), and adjust the selftest to not depend on
the type in vmlinux.h.
[0]: https://lore.kernel.org/bpf/7bc80a3b-d708-4735-aa3b-6a8c21720f9d@linux.ibm.com
Fixes: 88d706ba7cc5 ("selftests/bpf: Introduce arena spin lock")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311154244.3775505-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test exercises the kernel flag added to security_bpf by
effectively blocking light-skeletons from loading while allowing
normal skeletons to function as-is. Since this should work with any
arbitrary BPF program, an existing program from LSKELS_EXTRA was
used as a test payload.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250310221737.821889-3-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/bpf/20250310032045.651068-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The Makefile uses the exit code of the `llvm-config --link-static --libs`
command to choose between statically-linked and dynamically-linked LLVMs.
The stdout and stderr of that command are redirected to /dev/null.
To redirect the output the "&>" construction is used, which might not be
supported by /bin/sh, which is executed by make for $(shell ...) commands.
On such systems the test will fail even if static LLVM is actually
supported. Replace "&>" by ">/dev/null 2>&1" to fix this.
Fixes: 2a9d30fac818 ("selftests/bpf: Support dynamically linking LLVM if static is not available")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20250310145112.1261241-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The BPF cpumask selftests are currently run twice in
test_progs/cpumask.c, once by traversing cpumask_success_testcases, and
once by invoking RUN_TESTS(cpumask_success). Remove the invocation of
RUN_TESTS to properly run the selftests only once.
Now that the tests are run only through cpumask_success_testscases, add
to it the missing test_refcount_null_tracking testcase. Also remove the
__success annotation from it, since it is now loaded and invoked by the
runner.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftests for the bpf_cpumask_populate helper that sets a
bpf_cpumask to a bit pattern provided by a BPF program.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_lwt_seg6local.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_seg6local.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_seg6local.c.
Use the network helpers instead of `nc` to exchange the final packet.
Remove test_lwt_seg6local.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-2-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some routes in fb00:: are initialized during setup, even though they
aren't needed by the test as the UDP packets will travel through the
lightweight tunnels.
Remove these unnecessary routes.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-1-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The caller of cap_enable_effective() expects negative error code.
Fix it.
Before:
failed to restore CAP_SYS_ADMIN: -1, Unknown error -1
After:
failed to restore CAP_SYS_ADMIN: -3, No such process
failed to restore CAP_SYS_ADMIN: -22, Invalid argument
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Traffic monitor thread may see dangling stdout as the main thread closes
and reassigns stdout without protection. This happens when the main thread
finishes one subtest and moves to another one in the same netns_new()
scope.
The issue can be reproduced by running test_progs repeatedly with traffic
monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
For restoring stdout in crash_handler(), since it does not really care
about closing stdout, simlpy flush stdout and restore it to the original
one.
Then, Fix the issue by consolidating stdio_restore_cleanup() and
stdio_restore(), and protecting the use/close/assignment of stdout with
a lock. The locking in the main thread is always performed regradless of
whether traffic monitor is running or not for simplicity. It won't have
any side-effect.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow users to change traffic monitor's print function. If not provided,
traffic monitor will print to stdout by default.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305182057.2802606-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
reset_affinity() and save_ns() are only called in run_one_test(). There is
no need to call stdio_restore() in reset_affinity() and save_ns() if
stdio_restore() is moved right after a test finishes in run_one_test().
Also remove an unnecessary check of env.stdout_saved in crash_handler()
by moving env.stdout_saved assignment to the beginning of main().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_lwt_ip_encap.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_ip_encap.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_ip_encap.c.
Rework the GSO part to avoid using nc and dd.
Remove test_lwt_ip_encap.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250304-lwt_ip-v1-1-8fdeb9e79a56@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add some basic selftests for qspinlock built over BPF arena using
cond_break_label macro.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement queued spin lock algorithm as BPF program for lock words
living in BPF arena.
The algorithm is copied from kernel/locking/qspinlock.c and adapted for
BPF use.
We first implement abstract helpers for portable atomics and
acquire/release load instructions, by relying on X86_64 presence to
elide expensive barriers and rely on implementation details of the JIT,
and fall back to slow but correct implementations elsewhere. When
support for acquire/release load/stores lands, we can improve this
state.
Then, the qspinlock algorithm is adapted to remove dependence on
multi-word atomics due to lack of support in BPF ISA. For instance,
xchg_tail cannot use 16-bit xchg, and needs to be a implemented as a
32-bit try_cmpxchg loop.
Loops which are seemingly infinite from verifier PoV are annotated with
cond_break_label macro to return an error. Only 1024 NR_CPUs are
supported.
Note that the slow path is a global function, hence the verifier doesn't
know the return value's precision. The recommended way of usage is to
always test against zero for success, and not ret < 0 for error, as the
verifier would assume ret > 0 has not been accounted for. Add comments
in the function documentation about this quirk.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new cond_break_label macro that jumps to the specified label when
the cond_break termination check fires, and allows us to better handle
the uncontrolled termination of the loop.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
may_goto instruction does not use any registers,
but in compute_insn_live_regs() it was treated as a regular
conditional jump of kind BPF_K with r0 as source register.
Thus unnecessarily marking r0 as used.
Fixes: 14c8552db644 ("bpf: simple DFA-based live registers analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305085436.2731464-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cover instructions from each kind:
- assignment
- arithmetic
- store/load
- endian conversion
- atomics
- branches, conditional branches, may_goto, calls
- LD_ABS/LD_IND
- address_space_cast
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add several ./test_progs tests:
- arena_atomics/load_acquire
- arena_atomics/store_release
- verifier_load_acquire/*
- verifier_store_release/*
- verifier_precision/bpf_load_acquire
- verifier_precision/bpf_store_release
The last two tests are added to check if backtrack_insn() handles the
new instructions correctly.
Additionally, the last test also makes sure that the verifier
"remembers" the value (in src_reg) we store-release into e.g. a stack
slot. For example, if we take a look at the test program:
#0: r1 = 8;
/* store_release((u64 *)(r10 - 8), r1); */
#1: .8byte %[store_release];
#2: r1 = *(u64 *)(r10 - 8);
#3: r2 = r10;
#4: r2 += r1;
#5: r0 = 0;
#6: exit;
At #1, if the verifier doesn't remember that we wrote 8 to the stack,
then later at #4 we would be adding an unbounded scalar value to the
stack pointer, which would cause the program to be rejected:
VERIFIER LOG:
=============
...
math between fp pointer and register with unbounded min value is not allowed
For easier CI integration, instead of using built-ins like
__atomic_{load,store}_n() which depend on the new
__BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft
load-acquire/store-release instructions using __imm_insn(), as suggested
by Eduard.
All new tests depend on:
(1) Clang major version >= 18, and
(2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or
v4), and
(3) JIT supports load-acquire/store-release (currently arm64 and
x86-64)
In .../progs/arena_atomics.c:
/* 8-byte-aligned */
__u8 __arena_global load_acquire8_value = 0x12;
/* 1-byte hole */
__u16 __arena_global load_acquire16_value = 0x1234;
That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to
crash:
fatal error: error in backend: unable to write nop sequence of 1 bytes
To work around such llvm-17 CI job failures, conditionally define
__arena_global variables as 64-bit if __clang_major__ < 18, to make sure
.addr_space.1 has no holes. Ideally we should avoid compiling this file
using clang-17 at all (arena tests depend on
__BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but
that is a separate topic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.
Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.
Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add selftests, checking that running bpf_object__prepare successfully
creates maps before load step.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250303135752.158343-5-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
All tests from test_tunnel.sh have been migrated into test test_progs.
The last test remaining in the script is the test_ipip() that is already
covered in the test_prog framework by the NONE case of test_ipip_tunnel().
Remove the test_tunnel.sh script and its Makefile entry
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-10-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ip6tnl tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6tnl tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ipip6() and test_ip6ip6() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-9-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ip6geneve tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-8-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
geneve tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-7-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ip6erspan tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-6-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
erspan tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-5-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
ip6gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6gre tunnels. It uses the same
network topology and the same BPF programs than the script. Disable the
IPv6 DAD feature because it can take lot of time and cause some tests to
fail depending on the environment they're run on.
Remove test_ip6gre() and test_ip6gretap() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-4-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test gre tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_gre() and test_gre_no_tunnel_key() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-3-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
All tests use more or less the same ping commands as final validation.
Also test_ping()'s return value is checked with ASSERT_OK() while this
check is already done by the SYS() macro inside test_ping().
Create helpers around test_ping() and use them in the tests to avoid code
duplication.
Remove the unnecessary ASSERT_OK() from the tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-2-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A fair amount of code duplication is present among tests to attach BPF
programs.
Create generic_attach* helpers that attach BPF programs to a given
interface.
Use ASSERT_OK_FD() instead of ASSERT_GE() to check fd's validity.
Use these helpers in all the available tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-1-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order not to pollute CSV output, e.g.:
$ ./veristat -o csv exceptions_ext.bpf.o > test.csv
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/extension...
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/throwing_extension...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Before:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': Unknown error -2
...
After:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': No such file or directory
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow reading object file list from file.
E.g. the following command:
./veristat @list.txt
Is equivalent to the following invocation:
./veristat line-1 line-2 ... line-N
Where line-i corresponds to lines from list.txt.
Lines starting with '#' are ignored.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add tests for freplace behavior with the combination of sleepable
and non-sleepable global subprogs. The changes_pkt_data selftest
did all the hardwork, so simply rename it and include new support
for more summarization tests for might_sleep bit.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
