Age | Commit message (Collapse) | Author |
|
serial_test_flow_dissector_namespace manipulates both the root net
namespace and a dedicated non-root net namespace. If for some reason a
program attach on root namespace succeeds while it was expected to
fail, the unexpected program will remain attached to the root namespace,
possibly affecting other runs or even other tests in the same run.
Fix undesired test failure side effect by explicitly detaching programs
on failing tests expecting attach to fail. As a side effect of this
change, do not test errno value if the tested operation do not fail.
Fixes: 284ed00a59dd ("selftests/bpf: migrate flow_dissector namespace exclusivity test")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241128-small_flow_test_fix-v1-1-c12d45c98c59@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This verifies that programs of BPF_PROG_TYPE_CGROUP_SKB can access
skb->data_end with direct packet access when being run with
BPF_PROG_TEST_RUN.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241125152603.375898-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that test_flow_dissector.sh has been converted to test_progs, remove
the legacy test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-14-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_flow_dissector.sh loads flow_dissector program and subprograms,
creates and configured relevant tunnels and interfaces, and ensure that
the bpf dissection is actually performed correctly. Similar tests exist
in test_progs (thanks to flow_dissector.c) and run the same programs,
but those are only executed with BPF_PROG_RUN: those tests are then
missing some coverage (eg: coverage for flow keys manipulated when the
configured flower uses a port range, which has a dedicated test in
test_flow_dissector.sh)
Convert test_flow_dissector.sh into test_progs so that the corresponding
tests are also run in CI.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-13-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
network_helpers.c provides some helpers to generate ip checksums or ip
pseudo-header checksums, but not for upper layers (eg: udp checksums)
Add helpers for udp checksum to allow manually building udp packets.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-12-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Trying to add udp-dedicated helpers in network_helpers involves
including some udp header, which makes multiple test_progs tests build
fail:
In file included from ./progs/test_cls_redirect.h:13,
from [...]/prog_tests/cls_redirect.c:15:
[...]/usr/include/linux/udp.h:23:8: error: redefinition of ‘struct udphdr’
23 | struct udphdr {
| ^~~~~~
In file included from ./network_helpers.h:17,
from [...]/prog_tests/cls_redirect.c:13:
[...]/usr/include/netinet/udp.h:55:8: note: originally defined here
55 | struct udphdr
| ^~~~~~
This error is due to struct udphdr being defined in both <linux/udp.h>
and <netinet/udp.h>.
Use only <netinet/udp.h> in every test. While at it, perform the same
for tcp.h. For some tests, the change needs to be done in the eBPF
program part as well, because of some headers sharing between both
sides.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-11-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
network_helpers.h provides helpers to compute checksum for pseudo
headers but no helpers to compute the global checksums.
Before adding those, clarify csum_tcpudp_magic and csum_ipv6_magic
purpose by adding some documentation.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-10-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
xdp_metadata test has a small helper computing ipv4 checksums to allow
manually building packets.
Move this helper to network_helpers to share it with other tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-9-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable CONFIG_NET_ACT_GACT to allow adding simple actions with tc
filters. This is for example needed to migrate test_flow_dissector into
the automated testing performed in CI.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-8-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit a11c397c43d5 ("bpf/flow_dissector: add mode to enforce global BPF
flow dissector") is currently tested in test_flow_dissector.sh, which is
not part of test_progs. Add the corresponding test to flow_dissector.c,
which is part of test_progs. The new test reproduces the behavior
implemented in its shell script counterpart:
- attach a flow dissector program to the root net namespace, ensure
that we can not attach another flow dissector in any non-root net
namespace
- attach a flow dissector program to a non-root net namespace, ensure
that we can not attach another flow dissector in root namespace
Since the new test is performing operations in the root net namespace,
make sure to set it as a "serial" test to make sure not to conflict with
any other test.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-7-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The bpf_flow program is able to handle GRE headers in IP packets. Add a
few test data input simulating those GRE packets, with 2 different
cases:
- parse GRE and the encapsulated packet
- parse GRE only
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-6-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The flow_dissector test integrated in test_progs actually runs a wide
matrix of tests over different packets types and bpf programs modes, but
exposes only 3 main tests, preventing tests users from running specific
subtests with a specific input only.
Expose all subtests executed by flow_dissector by using
test__start_subtest().
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-5-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The flow_dissector runs plenty of tests over diffent kind of packets,
grouped into three categories: skb mode, non-skb mode with direct
attach, and non-skb with indirect attach.
Re-split the main function into dedicated tests. Each test now must have
its own setup/teardown, but for the advantage of being able to run them
separately. While at it, make sure that tests attaching the bpf programs
are run in a dedicated ns.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-4-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The flow dissector test currently relies on generic CHECK macros to
perform tests. Update those to newer, more-specific ASSERT macros.
This update allows to get rid of the global duration variable, which was
needed by the CHECK macros
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-3-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The flow_dissector program currently compares flow keys returned by bpf
program with the expected one thanks to a custom macro using memcmp.
Use the new ASSERT_MEMEQ macro to perform this comparision. This update
also allows to get rid of the unused bpf_test_run_opts variable in
run_tests_skb_less (it was only used by the CHECK macro for its duration
field)
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-2-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We sometimes need to compare whole structures in an assert. It is
possible to use the existing macros on each field, but when the whole
structure has to be checked, it is more convenient to simply compare the
whole structure memory
Add a dedicated assert macro, ASSERT_MEMEQ, to allow bare memory
comparision
The output generated by this new macro looks like the following:
[...]
run_tests_skb_less:FAIL:returned flow keys unexpected memory mismatch
actual:
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00
expected:
0E 00 3E 00 DD 86 01 01 00 06 86 DD 50 00 90 1F
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01 00 00 00 00 00 00 00
[...]
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241120-flow_dissector-v3-1-45b46494f937@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
test_sockmap
Add this to more comprehensively test the socket memory accounting logic
in the __SK_REDIRECT and __SK_DROP cases of tcp_bpf_sendmsg. We don't have
test when apply_bytes are not zero in test_txmsg_redir_wait_sndmem.
test_send_large has opt->rate=2, it will invoke sendmsg two times.
Specifically, the first sendmsg will trigger the case where the ret value
of tcp_bpf_sendmsg_redir is less than 0; while the second sendmsg happens
after the 3 seconds timeout, and it will trigger __SK_DROP because socket
c2 has been removed from the sockmap/hash.
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20241016234838.3167769-2-zijianzhang@bytedance.com
|
|
CONFIG_PREEMPT is a preemtion model the so called "Low-Latency Desktop".
A different preemption model is PREEMPT_RT the so called "Real-Time".
Both implement preemption in kernel and set CONFIG_PREEMPTION.
There is also the so called "LAZY PREEMPT" which the "Scheduler
controlled preemption model". Here we have also preemption in the kernel
the rules are slightly different.
Therefore the testsuite should not check for CONFIG_PREEMPT (as one
model) but for CONFIG_PREEMPTION to figure out if preemption in the
kernel is possible.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241119161819.qvEcs-n_@linutronix.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make sure the proto::close callback gets invoked on vsock release.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241118-vsock-bpf-poll-close-v1-4-f1b9669cacdc@rbox.co
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
|
|
Verify that vsock's poll() notices when sk_psock::ingress_msg isn't empty.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241118-vsock-bpf-poll-close-v1-2-f1b9669cacdc@rbox.co
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
|
Merge in late fixes to prepare for the 6.13 net-next PR.
Conflicts:
include/linux/phy.h
41ffcd95015f net: phy: fix phylib's dual eee_enabled
721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap
https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
2160428bcb20 net: txgbe: fix null pointer to pcs
2160428bcb20 net: txgbe: remove GPIO interrupt controller
Adjacent commits:
include/linux/phy.h
41ffcd95015f net: phy: fix phylib's dual eee_enabled
516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new tests in sockmap_basic.c to test SK_PASS for sockmap
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-3-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
token/obj_priv_implicit_token_envvar test may fail in an environment
where the process executing tests can not write to the root path.
Example:
https://github.com/libbpf/libbpf/actions/runs/11844507007/job/33007897936
Change default path used by the test to /tmp/bpf-token-fs, and make it
runtime configurable via an environment variable.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241115003853.864397-1-ihor.solodrai@pm.me
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2024-11-14
We've added 9 non-merge commits during the last 4 day(s) which contain
a total of 3 files changed, 226 insertions(+), 84 deletions(-).
The main changes are:
1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has
dependency on the other changes in the bpf-next/net branch,
from Zijian Zhang.
2) Drop netns codes from mptcp test. Reuse the common helpers in
test_progs, from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, sockmap: Fix sk_msg_reset_curr
bpf, sockmap: Several fixes to bpf_msg_pop_data
bpf, sockmap: Several fixes to bpf_msg_push_data
selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap
selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap
selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap
selftests/bpf: Fix SENDPAGE data logic in test_sockmap
selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap
selftests/bpf: Drop netns helpers in mptcp
====================
Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that verifies specific behavior of arena range tree
algorithm and adjust existing big_alloc1 test due to use
of global data in arena.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-3-alexei.starovoitov@gmail.com
|
|
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890f2 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add three tests for struct_ops using private stack.
./test_progs -t struct_ops_private_stack
#336/1 struct_ops_private_stack/private_stack:OK
#336/2 struct_ops_private_stack/private_stack_fail:OK
#336/3 struct_ops_private_stack/private_stack_recur:OK
#336 struct_ops_private_stack:OK
The following is a snippet of a struct_ops check_member() implementation:
u32 moff = __btf_member_bit_offset(t, member) / 8;
switch (moff) {
case offsetof(struct bpf_testmod_ops3, test_1):
prog->aux->priv_stack_requested = true;
prog->aux->recursion_detected = test_1_recursion_detected;
fallthrough;
default:
break;
}
return 0;
The first test is with nested two different callback functions where the
first prog has more than 512 byte stack size (including subprogs) with
private stack enabled.
The second test is a negative test where the second prog has more than 512
byte stack size without private stack enabled.
The third test is the same callback function recursing itself. At run time,
the jit trampoline recursion check kicks in to prevent the recursion. The
recursion_detected() callback function is implemented by the bpf_testmod,
the following message in dmesg
bpf_testmod: oh no, recursing into test_1, recursion_misses 1
demonstrates the callback function is indeed triggered when recursion miss
happens.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163938.2225528-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some private stack tests are added including:
- main prog only with stack size greater than BPF_PSTACK_MIN_SIZE.
- main prog only with stack size smaller than BPF_PSTACK_MIN_SIZE.
- prog with one subprog having MAX_BPF_STACK stack size and another
subprog having non-zero small stack size.
- prog with callback function.
- prog with exception in main prog or subprog.
- prog with async callback without nesting
- prog with async callback with possible nesting
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163927.2224750-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Similar to commit [1] sample perf events less often in
test_send_signal_nmi(). This should reduce perf events throttling.
[1] 7015843afcaf ("selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The following invocation:
$ t1=send_signal/send_signal_perf_thread_remote \
t2=send_signal/send_signal_nmi_thread_remote \
./test_progs -t $t1,$t2
Leads to send_signal_nmi_thread_remote to be stuck
on a line 180:
/* wait for result */
err = read(pipe_c2p[0], buf, 1);
In this test case:
- perf event PERF_COUNT_HW_CPU_CYCLES is created for parent process;
- BPF program is attached to perf event, and sends a signal to child
process when event occurs;
- parent program burns some CPU in busy loop and calls read() to get
notification from child that it received a signal.
The perf event is declared with .sample_period = 1.
This forces perf to throttle events, and under some unclear conditions
the event does not always occur while parent is in busy loop.
After parent enters read() system call CPU cycles event won't be
generated for parent anymore. Thus, if perf event had not occurred
already the test is stuck.
This commit updates the parent to wait for notification with a timeout,
doing several iterations of busy loop + read_with_timeout().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
int read_with_timeout(int fd, char *buf, size_t count, long usec)
As a regular read(2), but allows to specify a timeout in
micro-seconds. Returns -EAGAIN on timeout.
Implemented using select().
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit provides a watchdog timer that sets a limit of how long a
single sub-test could run:
- if sub-test runs for 10 seconds, the name of the test is printed
(currently the name of the test is printed only after it finishes);
- if sub-test runs for 120 seconds, the running thread is terminated
with SIGSEGV (to trigger crash_handler() and get a stack trace).
Specifically:
- the timer is armed on each call to run_one_test();
- re-armed at each call to test__start_subtest();
- is stopped when exiting run_one_test().
Default timeout could be overridden using '-w' or '--watchdog-timeout'
options. Value 0 can be used to turn the timer off.
Here is an example execution:
$ ./ssh-exec.sh ./test_progs -w 5 -t \
send_signal/send_signal_perf_thread_remote,send_signal/send_signal_nmi_thread_remote
WATCHDOG: test case send_signal/send_signal_nmi_thread_remote executes for 5 seconds, terminating with SIGSEGV
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x9049ef]
/lib64/libc.so.6(+0x40d00)[0x7f1f1184fd00]
/lib64/libc.so.6(read+0x4a)[0x7f1f1191cc4a]
./test_progs[0x720dd3]
./test_progs[0x71ef7a]
./test_progs(test_send_signal+0x1db)[0x71edeb]
./test_progs[0x9066c5]
./test_progs(main+0x5ed)[0x9054ad]
/lib64/libc.so.6(+0x2a088)[0x7f1f11839088]
/lib64/libc.so.6(__libc_start_main+0x8b)[0x7f1f1183914b]
./test_progs(_start+0x25)[0x527385]
#292 send_signal:FAIL
test_send_signal_common:PASS:reading pipe 0 nsec
test_send_signal_common:PASS:reading pipe error: size 0 0 nsec
test_send_signal_common:PASS:incorrect result 0 nsec
test_send_signal_common:PASS:pipe_write 0 nsec
test_send_signal_common:PASS:setpriority 0 nsec
Timer is implemented using timer_{create,start} librt API.
Internally librt uses pthreads for SIGEV_THREAD timers,
so this change adds a background timer thread to the test process.
Because of this a few checks in tests 'bpf_iter' and 'iters'
need an update to account for an extra thread.
For parallelized scenario the watchdog is also created for each worker
fork. If one of the workers gets stuck, it would be terminated by a
watchdog. In theory, this might lead to a scenario when all worker
threads are exhausted, however this should not be a problem for
server_main(), as it would exit with some of the tests not run.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20241112110906.3045278-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29d0 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139ab ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
The timer_lockup test needs 2 CPUs to work, on single-CPU nodes it fails
to set thread affinity to CPU 1 since it doesn't exist:
# ./test_progs -t timer_lockup
test_timer_lockup:PASS:timer_lockup__open_and_load 0 nsec
test_timer_lockup:PASS:pthread_create thread1 0 nsec
test_timer_lockup:PASS:pthread_create thread2 0 nsec
timer_lockup_thread:PASS:cpu affinity 0 nsec
timer_lockup_thread:FAIL:cpu affinity unexpected error: 22 (errno 0)
test_timer_lockup:PASS: 0 nsec
#406 timer_lockup:FAIL
Skip the test if only 1 CPU is available.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Fixes: 50bd5a0c658d1 ("selftests/bpf: Add timer lockup selftest")
Tested-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241107115231.75200-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add test cases to verify the following four update operations on htab of
maps don't trigger lockdep warning:
(1) add then delete
(2) add, overwrite, then delete
(3) add, then lookup_and_delete
(4) add two elements, then lookup_and_delete_batch
Test cases are added for pre-allocated and non-preallocated htab of maps
respectively.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Moving the definition of ENOTSUPP into bpf_util.h to remove the
duplicated definitions in multiple files.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
With recent uprobe fix [1] the sync time after unregistering uprobe is
much longer and prolongs the consumer test which creates and destroys
hundreds of uprobes.
This change adds 16 threads (which fits the test logic) and speeds up
the test.
Before the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
28.818778973 seconds time elapsed
0.745518000 seconds user
0.919186000 seconds sys
After the change:
# perf stat --null ./test_progs -t uprobe_multi_test/consumers 2>&1
#421/9 uprobe_multi_test/consumers:OK
#421 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -t uprobe_multi_test/consumers':
3.504790814 seconds time elapsed
0.012141000 seconds user
0.751760000 seconds sys
[1] commit 87195a1ee332 ("uprobes: switch to RCU Tasks Trace flavor for better performance")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-14-jolsa@kernel.org
|
|
Adding uprobe session consumers to the consumer test,
so we get the session into the test mix.
In addition scaling down the test to have just 1 uprobe
and 1 uretprobe, otherwise the test time grows and is
unsuitable for CI even with threads.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-13-jolsa@kernel.org
|
|
Testing that the session ret_handler bypass works on single
uprobe with multiple consumers, each with different session
ignore return value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-12-jolsa@kernel.org
|
|
Making sure kprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-11-jolsa@kernel.org
|
|
Making sure uprobe.session program can return only [0,1] values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-10-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value is stored
properly when single uprobe-ed function is executed recursively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-9-jolsa@kernel.org
|
|
Adding uprobe session test that verifies the cookie value
get properly propagated from entry to return program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-8-jolsa@kernel.org
|
|
Adding uprobe session test and testing that the entry program
return value controls execution of the return probe program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-7-jolsa@kernel.org
|
|
The new uprobe changes bring some new behaviour that we need to reflect
in the consumer test. Now pending uprobe instance in the kernel can
survive longer and thus might call uretprobe consumer callbacks in
some situations in which, previously, such callback would be omitted.
We now need to take that into account in uprobe-multi consumer tests.
The idea being that uretprobe under test either stayed from before to
after (uret_stays + test_bit) or uretprobe instance survived and we
have uretprobe active in after (uret_survives + test_bit).
uret_survives just states that uretprobe survives if there are *any*
uretprobes both before and after (overlapping or not, doesn't matter)
and uprobe was attached before.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241107094337.3848210-1-jolsa@kernel.org
|
|
In order to specify extra compilation or linking flags to BPF selftests,
it is possible to set EXTRA_CFLAGS and EXTRA_LDFLAGS from the command
line. The problem is that they are not propagated to sub-make calls
(runqslower, bpftool, libbpf) and in the better case are not applied, in
the worse case cause the entire build fail.
Propagate EXTRA_CFLAGS and EXTRA_LDFLAGS to the sub-makes.
This, for instance, allows to build selftests as PIE with
$ make EXTRA_CFLAGS='-fPIE' EXTRA_LDFLAGS='-pie'
Without this change, the command would fail because libbpf.a would not
be built with -fPIE and other PIE binaries would not link against it.
The only problem is that we have to explicitly provide empty
EXTRA_CFLAGS='' and EXTRA_LDFLAGS='' to the builds of kernel modules as
we don't want to build modules with flags used for userspace (the above
example would fail as kernel doesn't support PIE).
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|