summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/drivers/net
AgeCommit message (Collapse)Author
2020-01-19selftests: devlink_trap_tunnel_vxlan: Add test case for decap_errorAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_l3_drops: Add test cases of irif and erif disabledAmit Cohen
Add test cases to check that packets routed through disabled RIFs and packets routed from disabled RIFs are dropped and devlink counters increase when the action is trap. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata
Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests: mlxsw: Add test for FIB offload APIIdo Schimmel
The test reuses the common FIB offload tests in order to make sure that mlxsw correctly implements FIB offload. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests: netdevsim: Add test for FIB offload APIIdo Schimmel
Test various aspects of the FIB offload API on top of the netdevsim implementation. Both good and bad flows are tested. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02selftests: mlxsw: Add a self-test for port-default priorityPetr Machata
Send non-IP traffic to a port and observe that it gets prioritized according to the lldptool app=$prio,1,0 rules. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18selftests: forwarding: sch_ets: Add test coverage for ETS QdiscPetr Machata
This tests the newly-added ETS Qdisc. It runs two to three streams of traffic, each with a different priority. ETS Qdisc is supposed to allocate bandwidth according to the DRR algorithm and given weights. After running the traffic for a while, counters are compared for each stream to check that the expected ratio is in fact observed. In order for the DRR process to kick in, a traffic bottleneck must exist in the first place. In slow path, such bottleneck can be implemented by wrapping the ETS Qdisc inside a TBF or other shaper. This might however make the configuration unoffloadable. Instead, on HW datapath, the bottleneck would be set up by lowering port speed and configuring shared buffer suitably. Therefore the test is structured as a core component that implements the testing, with two wrapper scripts that implement the details of slow path resp. fast path configuration. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18selftests: forwarding: Move start_/stop_traffic from mlxsw to lib.shPetr Machata
These two functions are used for starting several streams of traffic, and then stopping them later. They will be handy for the test coverage of ETS Qdisc. Move them from mlxsw-specific qos_lib.sh to the generic lib.sh. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18selftests: mlxsw: Check devlink device before running testDanielle Ratson
The scale test for Spectrum-2 should only be invoked for Spectrum-2. Skip the test otherwise. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18selftests: mlxsw: Add router scale test for Spectrum-2Danielle Ratson
Same as for Spectrum-1, test the ability to add the maximum number of routes possible to the switch. Invoke the test from the 'resource_scale' wrapper script. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15selftests: mlxsw: Adjust test to recent changesIdo Schimmel
mlxsw does not support VXLAN devices with a physical device attached and vetoes such configurations upon enslavement to an offloaded bridge. Commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") changed the VXLAN device to be an upper of the physical device which causes mlxsw to veto the creation of the VXLAN device with "Unknown upper device type". This is OK as this configuration is not supported, but it prevents us from testing bad flows involving the enslavement of VXLAN devices with a physical device to a bridge, regardless if the physical device is an mlxsw netdev or not. Adjust the test to use a dummy device as a physical device instead of a mlxsw netdev. Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12selftests: Add a test of large binary to devlink health testAya Levin
Add a test of 2 PAGEs size (exceeds devlink previous length limitation) of binary data on a 'devlink health dump show' command. Set binary length to 8192, issue a dump show command and clear it. Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: mlxsw: Add test cases for devlink-trap layer 3 exceptionsAmit Cohen
Test that each supported packet trap exception is triggered under the right conditions. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: mlxsw: Add test cases for devlink-trap layer 3 dropsAmit Cohen
Test that each supported packet trap is triggered under the right conditions and that packets are indeed dropped and not forwarded. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Make devlink_trap_cleanup() more genericAmit Cohen
Add proto parameter in order to enable the use of devlink_trap_cleanup() in tests that use IPv6 protocol. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07selftests: devlink: Export functions to devlink libraryAmit Cohen
l2_drops_test() is used to check that drop traps are functioning as intended. Currently it is only used in the layer 2 test, but it is also useful for the layer 3 test introduced in the subsequent patch. l2_drops_cleanup() is used to clean configurations and kill mausezahn proccess. Export the functions to the common devlink library to allow it to be re-used by future tests. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06selftests: devlink: undo changes at the end of resource_testJakub Kicinski
The netdevsim object is reused by all the tests, but the resource tests puts it into a broken state (failed reload in a different namespace). Make sure it's fixed up at the end of that test otherwise subsequent tests fail. Fixes: b74c37fd35a2 ("selftests: netdevsim: add tests for devlink reload with resources") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18selftests: mlxsw: Add Spectrum-2 target scale for tc flower scale testDanielle Ratson
Return the maximum number of tc flower filters that can be offloaded. Currently, this value corresponds to the number of counters supported by the driver. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18selftests: mlxsw: Add a resource scale test for Spectrum-2Danielle Ratson
Add resource_scale test suitable for Spectrum-2. Invoke the mirror_gre test and check that the advertised scale numbers are indeed supported. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18selftests: mlxsw: Add Spectrum-2 mirror-to-gretap target scale testDanielle Ratson
Like in Spectrum, use the number of analyzers taken from the devlink command. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18selftests: mlxsw: Generalize the parameters of mirror_gre testDanielle Ratson
Use the number of analyzers taken from the devlink command, instead of hard-coded value, in order to make the test more generic. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11selftests: add netdevsim devlink health testsJiri Pirko
Add basic tests to verify functionality of netdevsim reporters. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07selftests: add netdevsim devlink dev info testJiri Pirko
Add test to verify netdevsim driver name returned by devlink dev info. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06selftests: test netdevsim reload forbid and failJiri Pirko
Extend netdevsim reload test by simulation of failures. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05selftests: test creating netdevsim inside network namespaceJiri Pirko
Add a test that creates netdevsim instance inside network namespace and verifies that the related devlink instance and port netdevices reside in the namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04selftests: netdevsim: add tests for devlink reload with resourcesJiri Pirko
Add couple of tests for devlink reload testing and also resource limitations testing, along with devlink reload. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27mlxsw: spectrum: Clear VLAN filters during port initializationIdo Schimmel
When a port is created, its VLAN filters are not cleared by the firmware. This causes tagged packets to be later dropped by the ingress STP filters, which default to DISCARD state. The above did not matter much until commit b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") where we exposed the drop reason to users. Without this patch, the drop reason users will see is not consistent. If a port is enslaved to a VLAN-aware bridge and a packet with an invalid VLAN tries to ingress the bridge, it will be dropped due to ingress STP filter. If the VLAN is later enabled and then disabled, the packet will be dropped by the ingress VLAN filter despite the above being a seemingly NOP operation. Fix this by clearing all the VLAN filters during port initialization. Adjust the test accordingly. Fixes: b5ce611fd96e ("mlxsw: spectrum: Add devlink-trap support") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21selftests: mlxsw: Add a test case for devlink-trapIdo Schimmel
Test generic devlink-trap functionality over mlxsw. These tests are not specific to a single trap, but do not check the devlink-trap common infrastructure either. Currently, the only test case is device deletion (by reloading the driver) while packets are being trapped. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21selftests: mlxsw: Add test cases for devlink-trap L2 dropsIdo Schimmel
Test that each supported packet trap is triggered under the right conditions and that packets are indeed dropped and not forwarded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17selftests: devlink_trap: Add test cases for devlink-trapIdo Schimmel
Add test cases for devlink-trap on top of the netdevsim implementation. The tests focus on the devlink-trap core infrastructure and user space API. They test both good and bad flows and also dismantle of the netdev and devlink device used to report trapped packets. This allows device drivers to focus their tests on device-specific functionality. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15selftests: netdevsim: add devlink regions testsJiri Pirko
Test netdevsim devlink region implementation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15selftests: netdevsim: add devlink params testsJiri Pirko
Test recently added netdevsim devlink param implementation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Add a test for leftover DSCP rulePetr Machata
Commit dedfde2fe1c4 ("mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removed") fixed a problem in mlxsw where last DSCP rule to be removed remained in effect when DSCP rewrite was applied. Add a selftest that covers this problem. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31selftests: mlxsw: Fix local variable declarations in DSCP testsPetr Machata
These two tests have some problems in the global scope pollution and on contrary, contain unnecessary local declarations. Fix them. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24selftests: mlxsw: Fix typo in qos_mc_aware.shMasanari Iida
This patch fix some spelling typo in qos_mc_aware.sh Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18selftests: mlxsw: Add a test for FIB offload indicationIdo Schimmel
Test that the offload indication for unicast routes is correctly set in different scenarios. IPv4 support will be added in the future. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-12selftests: mlxsw: Test nexthop offload indicationIdo Schimmel
Test that IPv4 and IPv6 nexthops are correctly marked with offload indication in response to neighbour events. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-04selftests: add basic netdevsim devlink flash testingJiri Pirko
Utilizes the devlink flash code. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15selftests: mlxsw: Test neighbour offload indicationIdo Schimmel
Test that neighbour entries are marked as offloaded. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10selftests: mlxsw: Test VRF MAC vetoingIdo Schimmel
Test that it is possible to set an IP address on a VRF and that it is not vetoed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: mlxsw: Add a new test for strict priorityPetr Machata
Test that when strict priority is configured on a system, the higher-priority traffic does actually win all the available bandwidth. The test uses a similar approach to qos_mc_aware.sh to run and account the traffic. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: mlxsw: Add qos_lib.shPetr Machata
Extract reusable code from qos_mc_aware.sh and put into a new library. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: mlxsw: qos_mc_aware: Configure shared buffersPetr Machata
This test runs two streams of traffic from two independent ports to create congestion on one egress port. It is necessary to configure the shared buffer thresholds correctly, to make sure that there is traffic from both streams in the shared buffer. Only then can the test actually test prioritization among these streams. Without this configuration, it is possible, that one of the streams takes all of port-pool quota, and the other stream is not even admitted, thus invalidating the result. On Spectrum-1, this is not a problem, because MC traffic uses a separate pool. But for Spectrum-2, MC and UC share the same pool, and the correct configuration is important. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28selftests: forwarding: devlink_lib: Avoid double sourcing of lib.shPetr Machata
Don't source lib.sh twice and make the script work with ifnames passed on the command line. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24selftests: mlxsw: spectrum-2: Add massive delta rehash testJiri Pirko
Do insertions and removal of filters during rehash in higher volumes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24selftests: mlxsw: spectrum-2: Check migrate end traceJiri Pirko
Add checking of newly added trace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24selftests: mlxsw: spectrum-2: Add IPv6 variant of simple delta rehash testJiri Pirko
Track the basic codepaths of delta rehash handling, using mlxsw tracepoints. Use IPv6 addresses. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-19 13:04:49 +0000