Age | Commit message (Collapse) | Author |
|
Add a selftest to exercise the condition where qdisc implementations
like netem or codel might empty the queue during a peek operation.
This tests the defensive code path in HFSC that checks the queue length
again after peeking to handle this case.
Based on the reproducer from Gerrard, improved by Jamal.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tc_redirect/tc_redirect_dtime fails intermittently on some systems
with:
(network_helpers.c:303: errno: Operation now in progress) Failed to connect to server
The problem is that on these systems systemd-networkd and systemd-udevd
are installed in the default configuration, which includes:
/usr/lib/systemd/network/99-default.link
/usr/lib/udev/rules.d/80-net-setup-link.rules
These configs instruct systemd to change MAC addresses of newly created
interfaces, which includes the ones created by BPF selftests. In this
particular case it causes SYN+ACK packets to be dropped, because they
get the PACKET_OTHERHOST type - the fact that this causes a connect()
on a blocking socket to return -EINPROGRESS looks like a bug, which
needs to be investigated separately.
systemd won't change the MAC address if the kernel reports that it was
already set by userspace; the NET_ADDR_SET check in
link_generate_new_hw_addr() is responsible for this.
In order to eliminate the race window between systemd and the test,
set MAC addresses during link creation. Ignore checkpatch's "quoted
string split across lines" warning, since it points to a command line,
and not a user-visible message.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250416124845.584362-1-iii@linux.ibm.com
|
|
When running diag.sh in a loop, chk_dump_one will report the following
"grep: write error":
13 ....chk 2 cestab [ OK ]
grep: write error
14 ....chk dump_one [ OK ]
15 ....chk 2->0 msk in use after flush [ OK ]
16 ....chk 2->0 cestab after flush [ OK ]
This error is caused by a broken pipe. When the output of 'ss' is processed
by grep, 'head -n 1' will exit immediately after getting the first line,
causing the subsequent pipe to close. At this time, if 'grep' is still
trying to write data to the closed pipe, it will trigger a SIGPIPE signal,
causing a write error.
One solution is not to use this problematic "head -n 1" command, but to use
mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value
of 'token'.
Fixes: ba2400166570 ("selftests: mptcp: add a test for mptcp_diag_dump_one")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'delay_us' shouldn't be added to 'struct dev_ctx' since now it is
handled by per-target command line & 'struct fault_inject_ctx'.
So remove it.
Fixes: 81586652bb1f ("selftests: ublk: add generic_06 for covering fault inject")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When adding recovery test:
- 'break' is missed for handling '-g' argument
- test name of test_generic_05.sh is wrong
So fix the two.
Fixes: 57e13a2e8cd2 ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Adding verifier test for accessing const void pointer argument in
tracing programs.
The test program loads 1st argument of bpf_fentry_test10 function
which is const void pointer and checks that verifier allows that.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-3-mannkafai@gmail.com
|
|
"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI
after recent merges from netdev:
* https://github.com/kernel-patches/bpf/actions/runs/14458537639
* https://github.com/kernel-patches/bpf/actions/runs/14457178732
It happens because disconnect has been disabled for TLS [1], and it
renders the test case invalid.
Removing all the test code creates a conflict between bpf and
bpf-next, so for now only remove the offending assert [2].
The test will be removed later on bpf-next.
[1] https://lore.kernel.org/netdev/20250404180334.3224206-1-kuba@kernel.org/
[2] https://lore.kernel.org/bpf/cfc371285323e1a3f3b006bfcf74e6cf7ad65258@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/bpf/20250416170246.2438524-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Change ALL_TESTS definition to "test-per-line".
Add the test case of per vlan snooping with port stp state change to
forwarding and also vlan equivalent case in both bridge_igmp.sh and
bridge_mld.sh.
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test verifies that attaching kprobe/kretprobe with long event names
does not trigger EINVAL errors.
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250417014848.59321-4-yangfeng59949@163.com
|
|
This test verifies that attaching uprobe/uretprobe with long event names
does not trigger EINVAL errors.
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250417014848.59321-3-yangfeng59949@163.com
|
|
Static analysis found an issue in bench_htab_mem.c and sk_assign.c
cppcheck output before this patch:
tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak]
tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak]
cppcheck output after this patch:
No resource leaks found
Fix the issue by closing the file descriptors fd and tc.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250421174405.26080-1-malayarout91@gmail.com
|
|
printf can pad each argument to a certain width.
Implement this for compatibility with the kselftest harness.
Currently only padding with spaces is supported.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
Now that we have a proper snprintf() implementation,
make sure truncation is handled properly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
With the addition of snprintf() and its usage in nolibc-test, the name of
the "vfprintf" test suite is not accurate anymore.
Rename the suite to be more generic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
With a proper snprintf() implementation in place, the ugly pipe usage is
not necessary anymore.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
nolibc's waitpid() now uses the waitid() syscall internally.
This removes the original reasoning for the reverted commit as
waitpid() is now available on all platforms and has an easier interface.
Switch back to waitpid().
This reverts commit a0bc8947ac731ff95a56e0c1737e69e8c56d5b78.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
The kselftest harness uses these functions.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
In nolibc intmax_t and uintmax_t are always the same as
(unsigned) long long/uint64_t as 128bit numbers are not supported.
Even libcs that do support 128bit numbers often fix intmax_t to 64bit
as it is used in ABIs and any change would break those.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge bpf and other fixes after downstream PRs.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This system call has been deprecated for quite a while now.
Let's try and remove it from the kernel completely.
Link: https://lore.kernel.org/20250415-kanufahren-besten-02ac00e6becd@brauner
Acked-by: Kees Cook <kees@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
|
|
UBSAN detects undefined behaviour at runtime.
To avoid introduction of new UB, enable UBSAN for nolibc-test.
By signalling detected errors through traps no runtime dependency
is necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250419-nolibc-ubsan-v2-7-060b8a016917@weissschuh.net
|
|
smash_stack() intentionally crashes.
Prevent UBSAN from tripping over it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250419-nolibc-ubsan-v2-6-060b8a016917@weissschuh.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes dynevent_limitations.tc test failure on dash by detecting and
handling bash and dash differences in evaluating \\"
* tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tc
|
|
Pull block fixes from Jens Axboe:
- MD pull via Yu:
- fix raid10 missing discard IO accounting (Yu Kuai)
- fix bitmap stats for bitmap file (Zheng Qixing)
- fix oops while reading all member disks failed during
check/repair (Meir Elisha)
- NVMe pull via Christoph:
- fix scan failure for non-ANA multipath controllers (Hannes
Reinecke)
- fix multipath sysfs links creation for some cases (Hannes
Reinecke)
- PCIe endpoint fixes (Damien Le Moal)
- use NULL instead of 0 in the auth code (Damien Le Moal)
- Various ublk fixes:
- Slew of selftest additions
- Improvements and fixes for IO cancelation
- Tweak to Kconfig verbiage
- Fix for page dirtying for blk integrity mapped pages
- loop fixes:
- buffered IO fix
- uevent fixes
- request priority inheritance fix
- Various little fixes
* tag 'block-6.15-20250417' of git://git.kernel.dk/linux: (38 commits)
selftests: ublk: add generic_06 for covering fault inject
ublk: simplify aborting ublk request
ublk: remove __ublk_quiesce_dev()
ublk: improve detection and handling of ublk server exit
ublk: move device reset into ublk_ch_release()
ublk: rely on ->canceling for dealing with ublk_nosrv_dev_should_queue_io
ublk: add ublk_force_abort_dev()
ublk: properly serialize all FETCH_REQs
selftests: ublk: move creating UBLK_TMP into _prep_test()
selftests: ublk: add test_stress_05.sh
selftests: ublk: support user recovery
selftests: ublk: support target specific command line
selftests: ublk: increase max nr_queues and queue depth
selftests: ublk: set queue pthread's cpu affinity
selftests: ublk: setup ring with IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN
selftests: ublk: add two stress tests for zero copy feature
selftests: ublk: run stress tests in parallel
selftests: ublk: make sure _add_ublk_dev can return in sub-shell
selftests: ublk: cleanup backfile automatically
selftests: ublk: add io_uring uapi header
...
|
|
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Commit df6f8c4d72ae ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to
TEST_PROGS") added set_pcie_speed.sh into TEST_PROGS but that script is a
helper that is only being called by set_pcie_cooling_state.sh, not a test
case itself. When set_pcie_speed.sh is in TEST_PROGS, selftest harness will
execute also it leading to bwctrl selftest errors:
# selftests: pcie_bwctrl: set_pcie_speed.sh
# cat: /cur_state: No such file or directory
not ok 2 selftests: pcie_bwctrl: set_pcie_speed.sh # exit=1
Place set_pcie_speed.sh into TEST_FILES instead to have it included into
installed test files but not execute it from the test harness.
Fixes: df6f8c4d72ae ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250417124529.11391-1-ilpo.jarvinen@linux.intel.com
|
|
Add a 5-byte NOP uprobe trigger benchmark (x86_64 specific) to measure
uprobes/uretprobes on top of NOP5 instructions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250414083647.1234007-2-jolsa@kernel.org
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc3).
No conflicts. Adjacent changes:
tools/net/ynl/pyynl/ynl_gen_c.py
4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place")
7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
|
|
Until we are certain that existing classful qdiscs work with bpf qdisc,
make sure we don't allow attaching a bpf qdisc to non root. Meanwhile,
attaching to mq is allowed.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-11-ameryhung@gmail.com
|
|
This test implements a more sophisticated qdisc using bpf. The bpf fair-
queueing (fq) qdisc gives each flow an equal chance to transmit data. It
also respects the timestamp of skb for rate limiting.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-10-ameryhung@gmail.com
|
|
This selftest includes a bare minimum fifo qdisc, which simply enqueues
sk_buffs into the back of a bpf list and dequeues from the front of the
list.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-9-ameryhung@gmail.com
|
|
The ovpn-cli tool can be compiled and used as selftest for the ovpn
kernel module.
[NOTE: it depends on libmedtls for decoding base64-encoded keys]
ovpn-cli implements the netlink and RTNL APIs and can thus be integrated
in any script for more automated testing.
Along with the tool, a bunch of scripts are provided that perform basic
functionality tests by means of network namespaces.
These scripts take part to the kselftest automation.
The output of the scripts, which will appear in the kselftest
reports, is a list of steps performed by the scripts plus some
output coming from the execution of `ping`, `iperf` and `ovpn-cli`
itself.
In general it is useful only in case of failure, in order to
understand which step has failed and why.
Please note: since peer sockets are tied to the userspace
process that created them (i.e. exiting the process will result
in closing the socket), every run of ovpn-cli that created
one will go to background and enter pause(), waiting for the
signal which will allow it to terminate.
Termination is accomplished at the end of each script by
issuing a killall command.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-23-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
|
|
Add one simple fault inject target, and verify if an application using ublk
device sees an I/O error quickly after the ublk server dies.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
test may exit early because of missing program or not having required
feature before calling _prep_test(), then $UBLK_TMP isn't cleaned.
Fix it by moving creating $UBLK_TMP into _prep_test(), any resources
created since _prep_test() will be cleaned by _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test_stress_05.sh for covering removing device with recovery
enabled.
io-hang has been observed with the following patch:
https://lore.kernel.org/linux-block/20250403-ublk_timeout-v3-1-aa09f76c7451@purestorage.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-13-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add user recovery feature.
Meantime add user recovery test: generic_04 and generic_05(zero copy)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Support target specific command line for making related command line code
handling more readable & clean.
Also helps for adding new features.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Increase max nr_queues to 32, and queue depth to 1024.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In NUMA machine, ublk IO performance is very sensitive with queue
pthread's affinity setting.
Retrieve queue's affinity and select the 1st cpu as queue thread's sched
affinity, and it is observed that single cpu task affinity can get
stable & good performance if client application is put on proper cpu.
Dump this info when adding one ublk device. Use shmem to communicate
queue's tid between parent and daemon.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_SETUP_SINGLE_ISSUER/IORING_SETUP_DEFER_TASKRUN
It is observed that this way is more efficient for fast nvme backing
file.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add stress_03 & stress_04 for covering zero copy feature.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Run stress tests in parallel, meantime add shell local function to
simplify the two stress tests.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Detach ublk daemon from the starting process completely by double-fork and
clearing its process group, so that `_add_ublk_dev` can return from sub-shell.
Then it is more friendly for writing shell test script for adding/recovering
ublk device.
Prepare for running ublk test in parallel.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use global array of $UBLK_BACKFILES for storing all backfile name, then
clean them automatically.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add io_uring UAPI header so that ublk can work with latest uapi
definition.
Fix the following build failure:
stripe.c: In function ‘stripe_to_uring_op’:
stripe.c:120:29: error: ‘IORING_OP_READV_FIXED’ undeclared (first use in this function); did you mean ‘IORING_OP_READ_FIXED’?
120 | return zc ? IORING_OP_READV_FIXED : IORING_OP_READV;
| ^~~~~~~~~~~~~~~~~~~~~
| IORING_OP_READ_FIXED
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Fixes: 57ed58c13256 ("selftests: ublk: enable zero copy for stripe target")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|