| Age | Commit message (Collapse) | Author |
|---|
|
Since ftracetest framework calls initialize_ftrace() right before
each test and after all tests, we don't need to init/cleanup
ftrace for each test case.
Just remove such unneeded init/cleanup code because it can
increase logfile size.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Cleanup ftrace by initialize_ftrace() after running
all test cases. This means we also don't need cleanup
ftrace on each test case, except for some special
options.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add SPDX License Identifier line to template file so
that someone who makes new testcase from the template
does not forgot it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Clear pid filter, synthetic_events, snapshots,
ftrace filter, and trace log in initialize_ftrace(),
since those are used in test cases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add a case number prefix to each logfile. This makes
it easier to find which logfile is corresponding
to which failure.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add --console hidden option for debug test cases.
This option allows to put "sh" or something else
when the test case hits a bug.
For example, if you find a testcase which doesn't
pass, you can insert sh for interactive debug as below
-----
#!/bin/sh
# description: sample test case
good-command
suspicious-wrong-command
sh # <- add this for interactive debug
-----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
Add --stop-fail option for debugging the ftracetest.
With this option, ftracetest stops right after a testcase
fails instead of finish running all testcases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
|
|
For 'perf script' brstackinsn also print a running cycles count. This
makes it easier to calculate cycle deltas for code sections measured
with LBRs.
% perf record -b -a sleep 1
% perf script -F +brstackinsn
...
00007f73ecc41083 insn: 74 06 # PRED 9 cycles [17] 1.11 IPC
00007f73ecc4108b insn: a8 10
00007f73ecc4108d insn: 74 71 # PRED 1 cycles [18] 1.00 IPC
00007f73ecc41100 insn: 48 8b 46 10
00007f73ecc41104 insn: 4c 8b 38
00007f73ecc41107 insn: 4d 85 ff
00007f73ecc4110a insn: 0f 84 b0 00 00 00
00007f73ecc41110 insn: 83 43 58 01
00007f73ecc41114 insn: 48 89 df
00007f73ecc41117 insn: e8 94 73 04 00 # PRED 6 cycles [24] 1.00 IPC
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Link: http://lkml.kernel.org/r/20180924170732.GA28040@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a ftrace style --graph-function argument to 'perf script' that
allows to print itrace function calls only below a given function. This
makes it easier to find the code of interest in a large trace.
% perf record -e intel_pt//k -a sleep 1
% perf script --graph-function group_sched_in --call-trace
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) calc_timer_values
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_cpu
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) arch_perf_update_userpage
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __fentry__
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) using_native_sched_clock
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_stable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) group_sched_in
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) event_sched_in.isra.107
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_set_state.part.71
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_time
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_pmu_disable
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_log_itrace_start
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_userpage
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) calc_timer_values
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_cpu
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) arch_perf_update_userpage
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __fentry__
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) using_native_sched_clock
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_stable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180920180540.14039-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add short cut options to print PT call trace and call-ret-trace, for
calls and call and returns. Roughly corresponds to ftrace function
tracer and function graph tracer.
Just makes these common use cases nicer to use.
% perf record -a -e intel_pt// sleep 1
% perf script --call-trace
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage
% perf script --call-ret-trace
perf 900 [000] 194167.205652203: tr strt ([unknown]) pt_config
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_config
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_event_add
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_void
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_int
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_txn
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_event_set_state.part.71
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180920180540.14039-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By default 'perf script' for itrace outputs sampled instructions or
branches. In my experience this is confusing to users because it's hard
to correlate with real program behavior. The sampling makes sense for
tools like 'perf report' that actually sample to reduce the run time,
but run time is normally not a problem for 'perf script'. It's better
to give an accurate representation of the program flow.
Default 'perf script' to output all calls for itrace. That's a much saner
default. The old behavior can be still requested with 'perf script'
--itrace=ibxwpe100000
v2: Fix ETM build failure
v3: Really fix ETM build failure (Kim Phillips)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Link: http://lkml.kernel.org/r/20180920180540.14039-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a --insn-trace short hand option for decoding and disassembling
instruction streams for intel_pt. This automatically pipes the output
into the xed disassembler to generate disassembled instructions. This
just makes this use model much nicer to use.
Before
% perf record -e intel_pt// ...
% perf script --itrace=i0ns --ns -F +insn,-event,-period | xed -F insn: -A -64
swapper 0 [000] 17276.429606186: ffffffff81010486 pt_config ([kernel.kallsyms]) nopl %eax, (%rax,%rax,1)
swapper 0 [000] 17276.429606186: ffffffff8101048b pt_config ([kernel.kallsyms]) add $0x10, %rsp
swapper 0 [000] 17276.429606186: ffffffff8101048f pt_config ([kernel.kallsyms]) popq %rbx
swapper 0 [000] 17276.429606186: ffffffff81010490 pt_config ([kernel.kallsyms]) popq %rbp
swapper 0 [000] 17276.429606186: ffffffff81010491 pt_config ([kernel.kallsyms]) popq %r12
swapper 0 [000] 17276.429606186: ffffffff81010493 pt_config ([kernel.kallsyms]) popq %r13
swapper 0 [000] 17276.429606186: ffffffff81010495 pt_config ([kernel.kallsyms]) popq %r14
swapper 0 [000] 17276.429606186: ffffffff81010497 pt_config ([kernel.kallsyms]) popq %r15
swapper 0 [000] 17276.429606186: ffffffff81010499 pt_config ([kernel.kallsyms]) retq
swapper 0 [000] 17276.429606186: ffffffff8101063e pt_event_add ([kernel.kallsyms]) cmpl $0x1, 0x1b0(%rbx)
swapper 0 [000] 17276.429606186: ffffffff81010645 pt_event_add ([kernel.kallsyms]) mov $0xffffffea, %eax
swapper 0 [000] 17276.429606186: ffffffff8101064a pt_event_add ([kernel.kallsyms]) mov $0x0, %edx
swapper 0 [000] 17276.429606186: ffffffff8101064f pt_event_add ([kernel.kallsyms]) popq %rbx
swapper 0 [000] 17276.429606186: ffffffff81010650 pt_event_add ([kernel.kallsyms]) cmovnz %edx, %eax
swapper 0 [000] 17276.429606186: ffffffff81010653 pt_event_add ([kernel.kallsyms]) jmp 0xffffffff81010635
swapper 0 [000] 17276.429606186: ffffffff81010635 pt_event_add ([kernel.kallsyms]) retq
swapper 0 [000] 17276.429606186: ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms]) test %eax, %eax
Now:
% perf record -e intel_pt// ...
% perf script --insn-trace --xed
... same output ...
XED needs to be installed with:
$ git clone https://github.com/intelxed/mbuild.git mbuild
$ git clone https://github.com/intelxed/xed
$ cd xed
$ ./mfile.py
$ ./mfile.py examples
$ sudo ./mfile.py --prefix=/usr/local install
$ sudo cp obj/examples/xed /usr/local/bin
$ xed | head -3
ERROR: required argument(s) were missing
Copyright (C) 2017, Intel Corporation. All rights reserved.
XED version: [v10.0-328-g7d62c8c49b7b]
$
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180920180540.14039-2-andi@firstfloor.org
[ Fixed up whitespace damage, added the 'mfile.py examples + cp obj/examples/xed ... ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pull networking updates from David Miller:
1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.
2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.
3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.
4) Add software timestamping to veth driver, from Michael Walle.
5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.
6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.
7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.
8) Support batching of XDP buffers in vhost_net, from Jason Wang.
9) Add flow dissector BPF hook, from Petar Penkov.
10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.
11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.
12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.
13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.
14) Add per-cgroup local storage to bpf
15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.
16) Support in-place encryption in TLS, from Vakul Garg.
17) Add new taprio packet scheduler, from Vinicius Costa Gomes.
18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.
19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.
20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.
21) Lots of u32 classifier cleanups and simplifications, from Al Viro.
22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.
23) Evict neighbour entries on carrier down, also from David Ahern.
24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.
25) Add support for filtering route dumps, from David Ahern.
26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.
27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.
28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.
29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...
|
|
Add a report to display branches in a similar fashion to perf script. The
main purpose of this report is to display disassembly, however, presently,
the only supported disassembler is Intel XED, and additionally the object
code must be present in perf build ID cache.
To use Intel XED, libxed.so must be present. To build and install
libxed.so:
git clone https://github.com/intelxed/mbuild.git mbuild
git clone https://github.com/intelxed/xed
cd xed
./mfile.py --share
sudo ./mfile.py --prefix=/usr/local install
sudo ldconfig
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181023075949.18920-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
database tables
Displaying all the database tables can help make the database easier to
understand.
Committer testing:
Opened all the tables, even the sqlite master table, which I selected
everything and used control+C, lets see if it works...
CREATE VIEW threads_view AS SELECT id,machine_id,(SELECT host_or_guest FROM machines_view WHERE id = machine_id) AS host_or_guest,process_id,pid,tid FROM threads
Humm, nope, just one of the cells got copied, even with everything selected :-)
Anyway, works as advertised, useful for perusing the data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
font
Shrinking the font allows more information to display.
Committer testing:
Works, tested with the convenient Control+Shift+'+' and Control+'-' as
well with the more cumbersome top menu "Edit" + "Enlarge/Shrink font"
options.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
the call-graph
Add a Find bar that appears at the bottom of the call-graph window.
Committer testing:
Using:
python tools/perf/scripts/python/exported-sql-viewer.py pt_example branches calls
Using the database built in the first "Committer Testing" section in
this patch series I was able to:
"Reports"
"Context-Sensitive Call Graphs"
Control+F or select "Edit" in the top menu then "Find"
__poll<ENTER>
and find the first place where the "__poll" function appears, then
press the down arrow in the lower right corner and go to the next, etc.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
sub-windows
Use Qt MDI (multiple document interface) to support multiple sub-windows.
Put the data model in a cache so that each sub-window can share the same
data. This allows mutiple views of the call-graph at the same time and
paves the way to add more reports.
Committer testing:
Starts with a "File Reports Windows" main menu, from the "Reports" I
can get what was available up to now, the "Context-Sensitivi Call Graph"
option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Additional reports will be added to the script so rename to reflect the
more general purpose.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
class TreeItem represents items at all levels of the call-graph tree.
However, not all the levels represent the same data i.e. the top-level is
comms, the next level is threads, and subsequent levels are functions.
Consequently it is simpler to have separate classes for different levels
with commonality in a base class. Refactor TreeItem class accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add helper functions for a few common cases.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
TreeModel
Factor out CallGraphModel from TreeModel, which paves the way to reuse
TreeModel in future reports.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The object name is never used, so don't bother setting it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Keep global data in a single object that is easy to pass around as
needed, without polluting the global namespace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
into a class
Separate the database details into a class that can provide different
connections using the same connection information. That paves the way
for sub-processes that require their own connection.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make a "Main" function so that the variables used do not pollute the global
namespace.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are not many standard icons, but the computer icon looks slightly
better than the information icon.
Committer testing:
Noticed the change on the icon on the gnome menu right next to the
"Activities" menu, looks nicer indeed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prevent weirdly small window size.
Committer testing:
Seems to work, but even before this patch, on my system, it always
started with:
xwininfo: Window id: 0x1e00002 "Call Graph: pt_example"
<SNIP>
Width: 800
Height: 600
<SNIP>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Set initial column sizes to improve initial display.
Committer testing:
Extended instructions on testing this, using the sqlite variant:
Make sure you have the SQLite glue for python+Qt installed, on fedora 27
I used:
# dnf install python-pyside
Collect some PT samples, say 5-secs worth, system wide:
# perf record -r 10 -e intel_pt//u -a sleep 5
[ perf record: Woken up 49 times to write data ]
[ perf record: Captured and wrote 96.131 MB perf.data ]
This results in this perf.data file:
# ls -larth perf.data
-rw-------. 1 root root 97M Oct 23 10:11 perf.data
With the following attributes:
# perf evlist -v
intel_pt//u: type: 8, size: 112, config: 0x300e601, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, exclude_hv: 1, sample_id_all: 1
dummy:u: type: 1, size: 112, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|IDENTIFIER, read_format: ID, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, context_switch: 1
#
Then generate the "pt_example" tables using:
# perf script -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py pt_example branches calls
2018-10-23 10:56:59.177711 Creating database...
2018-10-23 10:56:59.195842 Writing records...
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x263984516750 code 5: Failed to get instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e116fd20 code 6: Trace doesn't match instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e162c9ee code 6: Trace doesn't match instruction
instruction trace error type 1 cpu 2 pid 1644 tid 1644 ip 0x7f26e9ce831a code 6: Trace doesn't match instruction
<SNIP>
instruction trace error type 1 cpu 0 pid 1644 tid 1644 ip 0x7f26e13d07b4 code 6: Trace doesn't match instruction
Warning:
132 instruction trace errors
2018-10-23 11:25:25.015717 Adding indexes
2018-10-23 11:25:28.788061 Done
#
In my example, that perf.data file generated this db:
# file pt_example
pt_example: SQLite 3.x database, last written using SQLite version 3020001
[root@seventh perf]# ls -lah pt_example
-rw-r--r--. 1 root root 6.6G Oct 23 11:25 pt_example
#
Then use this python script to use that db and provide a GUI:
$ python tools/perf/scripts/python/call-graph-from-sql.py pt_example branches calls
I compared the column widths before this patch and after applying it,
the visual results match the patch intent.
The following patches will refer to this set of instructions in the "Committer
Testing" section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
"The main changes in this cycle were:
- Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed
based on the AMD Zen architecture, and are built and sold in China,
for domestic datacenter use. The code is pretty close to AMD
support, mostly with a few quirks and enumeration differences. (Pu
Wen)
- Enable CPUID support on Cyrix 6x86/6x86L processors"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/cpupower: Add Hygon Dhyana support
cpufreq: Add Hygon Dhyana support
ACPI: Add Hygon Dhyana support
x86/xen: Add Hygon Dhyana support to Xen
x86/kvm: Add Hygon Dhyana support to KVM
x86/mce: Add Hygon Dhyana support to the MCA infrastructure
x86/bugs: Add Hygon Dhyana to the respective mitigation machinery
x86/apic: Add Hygon Dhyana support
x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge
x86/amd_nb: Check vendor in AMD-only functions
x86/alternative: Init ideal_nops for Hygon Dhyana
x86/events: Add Hygon Dhyana support to PMU infrastructure
x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana
x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number
x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana
x86/cpu: Create Hygon Dhyana architecture support file
x86/CPU: Change query logic so CPUID is enabled before testing
x86/CPU: Use correct macros for Cyrix calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main updates in this cycle were:
- Lots of perf tooling changes too voluminous to list (big perf trace
and perf stat improvements, lots of libtraceevent reorganization,
etc.), so I'll list the authors and refer to the changelog for
details:
Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter
Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven
Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas
Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir
Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa.
... with the bulk of the changes written by Jiri Olsa, Tzvetomir
Stoyanov and Arnaldo Carvalho de Melo.
- Continued intel_rdt work with a focus on playing well with perf
events. This also imported some non-perf RDT work due to
dependencies. (Reinette Chatre)
- Implement counter freezing for Arch Perfmon v4 (Skylake and newer).
This allows to speed up the PMI handler by avoiding unnecessary MSR
writes and make it more accurate. (Andi Kleen)
- kprobes cleanups and simplification (Masami Hiramatsu)
- Intel Goldmont PMU updates (Kan Liang)
- ... plus misc other fixes and updates"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits)
kprobes/x86: Use preempt_enable() in optimized_callback()
x86/intel_rdt: Prevent pseudo-locking from using stale pointers
kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack
perf/x86/intel: Export mem events only if there's PEBS support
x86/cpu: Drop pointless static qualifier in punit_dev_state_show()
x86/intel_rdt: Fix initial allocation to consider CDP
x86/intel_rdt: CBM overlap should also check for overlap with CDP peer
x86/intel_rdt: Introduce utility to obtain CDP peer
tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file
tools lib traceevent: Separate out tep_strerror() for strerror_r() issues
perf python: More portable way to make CFLAGS work with clang
perf python: Make clang_has_option() work on Python 3
perf tools: Free temporary 'sys' string in read_event_files()
perf tools: Avoid double free in read_event_file()
perf tools: Free 'printk' string in parse_ftrace_printk()
perf tools: Cleanup trace-event-info 'tdata' leak
perf strbuf: Match va_{add,copy} with va_end
perf test: S390 does not support watchpoints in test 22
perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG
tools include: Adopt linux/bits.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking and misc x86 updates from Ingo Molnar:
"Lots of changes in this cycle - in part because locking/core attracted
a number of related x86 low level work which was easier to handle in a
single tree:
- Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E.
McKenney, Andrea Parri)
- lockdep scalability improvements and micro-optimizations (Waiman
Long)
- rwsem improvements (Waiman Long)
- spinlock micro-optimization (Matthew Wilcox)
- qspinlocks: Provide a liveness guarantee (more fairness) on x86.
(Peter Zijlstra)
- Add support for relative references in jump tables on arm64, x86
and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens)
- Be a lot less permissive on weird (kernel address) uaccess faults
on x86: BUG() when uaccess helpers fault on kernel addresses (Jann
Horn)
- macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav
Amit)
- ... and a handful of other smaller changes as well"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
locking/lockdep: Make global debug_locks* variables read-mostly
locking/lockdep: Fix debug_locks off performance problem
locking/pvqspinlock: Extend node size when pvqspinlock is configured
locking/qspinlock_stat: Count instances of nested lock slowpaths
locking/qspinlock, x86: Provide liveness guarantee
x86/asm: 'Simplify' GEN_*_RMWcc() macros
locking/qspinlock: Rework some comments
locking/qspinlock: Re-order code
locking/lockdep: Remove duplicated 'lock_class_ops' percpu array
x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
futex: Replace spin_is_locked() with lockdep
locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y
x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs
x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs
x86/extable: Macrofy inline assembly code to work around GCC inlining bugs
x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops
x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs
x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs
x86/refcount: Work around GCC inlining bug
x86/objtool: Use asm macros to work around GCC inlining bugs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The biggest change in this cycle is the conclusion of the big
'simplify RCU to two primary flavors' consolidation work - i.e.
there's a single RCU flavor for any kernel variant (PREEMPT and
!PREEMPT):
- Consolidate the RCU-bh, RCU-preempt, and RCU-sched flavors into a
single flavor similar to RCU-sched in !PREEMPT kernels and into a
single flavor similar to RCU-preempt (but also waiting on
preempt-disabled sequences of code) in PREEMPT kernels.
This branch also includes a refactoring of
rcu_{nmi,irq}_{enter,exit}() from Byungchul Park.
- Now that there is only one RCU flavor in any given running kernel,
the many "rsp" pointers are no longer required, and this cleanup
series removes them.
- This branch carries out additional cleanups made possible by the
RCU flavor consolidation, including inlining now-trivial
functions, updating comments and definitions, and removing
now-unneeded rcutorture scenarios.
- Now that there is only one flavor of RCU in any running kernel,
there is also only on rcu_data structure per CPU. This means that
the rcu_dynticks structure can be merged into the rcu_data
structure, a task taken on by this branch. This branch also
contains a -rt-related fix from Mike Galbraith.
There were also other updates:
- Documentation updates, including some good-eye catches from Joel
Fernandes.
- SRCU updates, most notably changes enabling call_srcu() to be
invoked very early in the boot sequence.
- Torture-test updates, including some preliminary work towards
making rcutorture better able to find problems that result in
insufficient grace-period forward progress.
- Initial changes to RCU to better promote forward progress of grace
periods, including fixing a bug found by Marius Hillenbrand and
David Woodhouse, with the fix suggested by Peter Zijlstra"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
srcu: Make early-boot call_srcu() reuse workqueue lists
rcutorture: Test early boot call_srcu()
srcu: Make call_srcu() available during very early boot
rcu: Convert rcu_state.ofl_lock to raw_spinlock_t
rcu: Remove obsolete ->dynticks_fqs and ->cond_resched_completed
rcu: Switch ->dynticks to rcu_data structure, remove rcu_dynticks
rcu: Switch dyntick nesting counters to rcu_data structure
rcu: Switch urgent quiescent-state requests to rcu_data structure
rcu: Switch lazy counts to rcu_data structure
rcu: Switch last accelerate/advance to rcu_data structure
rcu: Switch ->tick_nohz_enabled_snap to rcu_data structure
rcu: Merge rcu_dynticks structure into rcu_data structure
rcu: Remove unused rcu_dynticks_snap() from Tiny RCU
rcu: Convert "1UL << x" to "BIT(x)"
rcu: Avoid resched_cpu() when rescheduling the current CPU
rcu: More aggressively enlist scheduler aid for nohz_full CPUs
rcu: Compute jiffies_till_sched_qs from other kernel parameters
rcu: Provide functions for determining if call_rcu() has been invoked
rcu: Eliminate ->rcu_qs_ctr from the rcu_dynticks structure
rcu: Motivate Tiny RCU forward progress
...
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These make hibernation on 32-bit x86 systems work in all of the cases
in which it works on 64-bit x86 ones, update the menu cpuidle governor
and the "polling" state to make them more efficient, add more hardware
support to cpufreq drivers and fix issues with some of them, fix a bug
in the conservative cpufreq governor, fix the operating performance
points (OPP) framework and make it more stable, update the devfreq
subsystem to take changes in the APIs used by into account and clean
up some things all over.
Specifics:
- Backport hibernation bug fixes from x86-64 to x86-32 and
consolidate hibernation handling on x86 to allow 32-bit systems to
work in all of the cases in which 64-bit ones work (Zhimin Gu, Chen
Yu).
- Fix hibernation documentation (Vladimir D. Seleznev).
- Update the menu cpuidle governor to fix a couple of issues with it,
make it more efficient in some cases and clean it up (Rafael
Wysocki).
- Rework the cpuidle polling state implementation to make it more
efficient (Rafael Wysocki).
- Clean up the cpuidle core somewhat (Fieah Lim).
- Fix the cpufreq conservative governor to take policy limits into
account properly in some cases (Rafael Wysocki).
- Add support for retrieving guaranteed performance information to
the ACPI CPPC library and make the intel_pstate driver use it to
expose the CPU base frequency via sysfs on systems with the
hardware-managed P-states (HWP) feature enabled (Srinivas
Pandruvada).
- Fix clang warning in the CPPC cpufreq driver (Nathan Chancellor).
- Get rid of device_node.name printing from cpufreq (Rob Herring).
- Remove unnecessary unlikely() from the cpufreq core (Igor Stoppa).
- Add support for the r8a7744 SoC to the cpufreq-dt driver (Biju
Das).
- Update the dt-platdev cpufreq driver to allow RK3399 to have
separate tunables per cluster (Dmitry Torokhov).
- Fix the dma_alloc_coherent() usage in the tegra186 cpufreq driver
(Christoph Hellwig).
- Make the imx6q cpufreq driver read OCOTP through nvmem for
imx6ul/imx6ull (Anson Huang).
- Fix several bugs in the operating performance points (OPP)
framework and make it more stable (Viresh Kumar, Dave Gerlach).
- Update the devfreq subsystem to take changes in the APIs used by
into account, fix some issues with it and make it stop print
device_node.name directly (Bjorn Andersson, Enric Balletbo i Serra,
Matthias Kaehlcke, Rob Herring, Vincent Donnefort, zhong jiang).
- Prepare the generic power domains (genpd) framework for dealing
with domains containing CPUs (Ulf Hansson).
- Prevent sysfs attributes representing low-power S0 residency
counters from being exposed if low-power S0 support is not
indicated in ACPI FADT (Rajneesh Bhardwaj).
- Get rid of custom CPU features macros for Intel CPUs from the
intel_idle and RAPL drivers (Andy Shevchenko).
- Update the tasks freezer to list tasks that refused to freeze and
caused a system transition to a sleep state to be aborted (Todd
Brandt).
- Update the pm-graph set of tools to v5.2 (Todd Brandt).
- Fix some issues in the cpupower utility (Anders Roxell, Prarit
Bhargava)"
* tag 'pm-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
PM / Domains: Document flags for genpd
PM / Domains: Deal with multiple states but no governor in genpd
PM / Domains: Don't treat zero found compatible idle states as an error
cpuidle: menu: Avoid computations when result will be discarded
cpuidle: menu: Drop redundant comparison
cpufreq: tegra186: don't pass GFP_DMA32 to dma_alloc_coherent()
cpufreq: conservative: Take limits changes into account properly
Documentation: intel_pstate: Add base_frequency information
cpufreq: intel_pstate: Add base_frequency attribute
ACPI / CPPC: Add support for guaranteed performance
cpuidle: menu: Simplify checks related to the polling state
PM / tools: sleepgraph and bootgraph: upgrade to v5.2
PM / tools: sleepgraph: first batch of v5.2 changes
cpupower: Fix coredump on VMWare
cpupower: Fix AMD Family 0x17 msr_pstate size
cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull
cpufreq: dt-platdev: allow RK3399 to have separate tunables per cluster
cpuidle: poll_state: Revise loop termination condition
cpuidle: menu: Move the latency_req == 0 special case check
cpuidle: menu: Avoid computations for very close timers
...
|
|
add test to verify if act_police forbids 'goto chain' control actions for
'exceed' traffic.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add test to verify if act_gact forbids 'goto chain' control actions on
'random' traffic in gact.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"One new core feature here, a small collection of new drivers and a
bunch of small improvements in existing drivers:
- A new CS_WORD flag for transfers where the chip select is toggled
at every word, with both a generic implementation and the ability
for controllers to do this automatically (including a DaVinci one).
- New drivers for Mediatek MT2712, Qualcomm GENI and QSPI, Spreadtrum
SPI and ST STM32 QSPI plus new IDs for several existing ones"
* tag 'spi-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
spi: lpspi: add imx8qxp compatible string
spi: Allow building SPI_BCM63XX_HSSPI on ARM-based SoCs
spi: omap2-mcspi: Add slave mode support
spi: omap2-mcspi: Set FIFO DMA trigger level to word length
spi: omap2-mcspi: Switch to readl_poll_timeout()
spi: spi-mem: add stm32 qspi controller
dt-bindings: spi: add stm32 qspi controller
spi: sh-msiof: document R8A779{7|8}0 bindings
spi: pic32-sqi: don't pass GFP_DMA32 to dma_alloc_coherent
MAINTAINERS: Add entry for Broadcom SPI controller
spi: sh-msiof: fix deferred probing
spi: imx: use PIO mode if size is small
spi: imx: correct wml as the last sg length
spi: imx: move wml setting to later than setup_transfer
PCI: Provide pci_match_id() with CONFIG_PCI=n
spi: Make GPIO CSs honour the SPI_NO_CS flag
spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
spi: pxa2xx: Add devicetree support
spi: pxa2xx: Use an enum for type
spi: spi-geni-qcom: Add SPI driver support for GENI based QUP
...
|
|
Use SPDX license identifier in call-graph-from-sql.py.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181001062853.28285-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Call it 'nr', as in this context it should be expressive enough, i.e.:
# perf trace -e sched:*waking/nr=8,call-graph=fp/
0.000 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=001
try_to_wake_up ([kernel.kallsyms])
sched_clock ([kernel.kallsyms])
3.933 :0/0 sched:sched_waking:comm=rcu_sched pid=10 prio=120 target_cpu=001
try_to_wake_up ([kernel.kallsyms])
sched_clock ([kernel.kallsyms])
3.970 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
try_to_wake_up ([kernel.kallsyms])
__libc_write (/usr/lib64/libpthread-2.26.so)
20.069 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
try_to_wake_up ([kernel.kallsyms])
__libc_write (/usr/lib64/libpthread-2.26.so)
37.170 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
try_to_wake_up ([kernel.kallsyms])
__libc_write (/usr/lib64/libpthread-2.26.so)
53.267 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
try_to_wake_up ([kernel.kallsyms])
__libc_write (/usr/lib64/libpthread-2.26.so)
70.365 IPDL Backgroun/3622 sched:sched_waking:comm=Gecko_IOThread pid=3569 prio=120 target_cpu=003
try_to_wake_up ([kernel.kallsyms])
__libc_write (/usr/lib64/libpthread-2.26.so)
75.781 Web Content/3649 sched:sched_waking:comm=JS Helper pid=3670 prio=120 target_cpu=000
try_to_wake_up ([kernel.kallsyms])
try_to_wake_up ([kernel.kallsyms])
wake_up_q ([kernel.kallsyms])
futex_wake ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
pthread_cond_signal@@GLIBC_2.3.2 (/usr/lib64/libpthread-2.26.so)
#
# perf trace -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
0.000 :0/0 sched:sched_switch:swapper/0:0 [120] S ==> trace:3367 [120]
0.046 :0/0 sched:sched_switch:swapper/1:0 [120] S ==> kworker/u16:58:2722 [120]
570.670 irq/50-iwlwifi/680 net:net_dev_queue:dev=wlp3s0 skbaddr=0xffff93498051ef00 len=66
__dev_queue_xmit ([kernel.kallsyms])
1106.141 jbd2/dm-0-8/476 block:block_plug:[jbd2/dm-0-8]
1106.175 jbd2/dm-0-8/476 block:block_unplug:[jbd2/dm-0-8] 1
1618.088 kworker/u16:30/2694 block:block_plug:[kworker/u16:30]
1810.000 :0/0 net:net_dev_queue:dev=vnet0 skbaddr=0xffff93498051ef00 len=52
__dev_queue_xmit ([kernel.kallsyms])
3857.974 :0/0 net:net_dev_queue:dev=vnet0 skbaddr=0xffff93498051f900 len=52
__dev_queue_xmit ([kernel.kallsyms])
4790.277 jbd2/dm-2-8/748 block:block_plug:[jbd2/dm-2-8]
4790.448 jbd2/dm-2-8/748 block:block_plug:[jbd2/dm-2-8]
#
The global --max-events has precendence:
# trace --max-events 3 -e sched:*switch/nr=2/,block:*_plug/nr=4/,block:*_unplug/nr=1/,net:*dev_queue/nr=3,max-stack=16/
0.000 :0/0 sched:sched_switch:swapper/0:0 [120] S ==> qemu-system-x86:2252 [120]
0.029 qemu-system-x8/2252 sched:sched_switch:qemu-system-x86:2252 [120] D ==> swapper/0:0 [120]
58.047 DNS Res~er #14/31661 net:net_dev_queue:dev=wlp3s0 skbaddr=0xffff9346966af100 len=84
__dev_queue_xmit ([kernel.kallsyms])
__libc_send (/usr/lib64/libpthread-2.26.so)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-s4jswltvh660ughvg9nwngah@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When the perf script output is written to a terminal stream, the normal
output of `perf script` would get buffered, but its debug output would
be written directly. This made it quite hard to figure out where a given
debug output is coming from.
We can improve on this by flushing the output buffer after processing an
event. To see the value, compare the following output for a `perf script
-v` run:
Before this patch:
```
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
... lots and lots of verbose debug output
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
After this patch:
```
...
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
This new output format makes it much easier to use perf script output
for debugging purposes, e.g. to investigate broken dwarf unwinding.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181021191424.16183-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The script tool isn't using a browser, yet use_browser wasn't set
explicitly to zero. This in turn lead to confusing output such as:
```
$ perf script -vvv ...
...
overlapping maps in /home/milian/foobar (disable tui for more info)
...
```
Explicitly set use_browser to 0 now, which gives us the extended
debug information now in perf script as expected.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20181021191424.16183-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding the check for tasks we monitor via -p/-t options, and finish stat
if there's no longer task to monitor.
Requested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/20181022093015.9106-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We must pair:
thread = machine__findnew_thread();
with thread__put(thread). Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: c4191e55b874 ("perf trace: Show comm and tid for tracepoint events")
Link: https://lkml.kernel.org/n/tip-dkxsb8cwg87rmkrzrbns1o4z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When we use machine__resolve() we grab a reference to
addr_location.thread (and in the future to other elements there) via
machine__findnew_thread(), so we must pair that with
addr_location__put(), else we'll never drop that thread when it exits
and no other remaining data structures have pointers to it. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ivg9hifzeuokb1f5jxc2wob4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Because there may be more such events in the ring buffer that should be
discarded when an app decides to stop considering them.
At some point we'll do this with eBPF, this way we stop them at origin,
before they are placed in the ring buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-uzufuxws4hufigx07ue1dpv6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-10-21
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Implement two new kind of BPF maps, that is, queue and stack
map along with new peek, push and pop operations, from Mauricio.
2) Add support for MSG_PEEK flag when redirecting into an ingress
psock sk_msg queue, and add a new helper bpf_msg_push_data() for
insert data into the message, from John.
3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use
direct packet access for __skb_buff, from Song.
4) Use more lightweight barriers for walking perf ring buffer for
libbpf and perf tool as well. Also, various fixes and improvements
from verifier side, from Daniel.
5) Add per-symbol visibility for DSO in libbpf and hide by default
global symbols such as netlink related functions, from Andrey.
6) Two improvements to nfp's BPF offload to check vNIC capabilities
in case prog is shared with multiple vNICs and to protect against
mis-initializing atomic counters, from Jakub.
7) Fix for bpftool to use 4 context mode for the nfp disassembler,
also from Jakub.
8) Fix a return value comparison in test_libbpf.sh and add several
bpftool improvements in bash completion, documentation of bpf fs
restrictions and batch mode summary print, from Quentin.
9) Fix a file resource leak in BPF selftest's load_kallsyms()
helper, from Peng.
10) Fix an unused variable warning in map_lookup_and_delete_elem(),
from Alexei.
11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc,
from Nicolas.
12) Add missing executables to .gitignore in BPF selftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
David Ahern's dump indexing bug fix in 'net' overlapped the
change of the function signature of inet6_fill_ifaddr() in
'net-next'. Trivially resolved.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When trying to complete "bpftool map update" commands, the call to
printf would print an error message that would show on the command line
if no map is found to complete the command line.
Fix it by making sure we have map ids to complete the line with, before
we try to print something.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When batch mode is used and all commands succeeds, bpftool prints the
number of commands processed to stderr. There is no particular reason to
use stderr for this, we could as well use stdout. It would avoid getting
unnecessary output on stderr if the standard ouptut is redirected, for
example.
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
