| Age | Commit message (Collapse) | Author |
|---|
|
Add the minimal changes to enable objtool build on LoongArch,
most of the functions are stubs to only fix the build errors
when make -C tools/objtool.
This is similar with commit e52ec98c5ab1 ("objtool/powerpc:
Enable objtool to be built on ppc").
Co-developed-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
|
|
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
|
|
Running the page-pool sample on production machines under moderate
networking load shows recycling rate higher than 100%:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.3% (alloc: 1392:2290247724 recycle: 469289484:1828235386)
Note that outstanding refs (89088) == slow alloc * cache size (1392 * 64)
which means this machine is recycling page pool pages perfectly, not
a single page has been released.
The extra 0.3% is because sample ignores allocations from the ptr_ring.
Treat those the same as alloc_fast, the ring vs cache alloc is
already captured accurately enough by recycling stats.
With the fix:
$ page-pool
eth0[2] page pools: 14 (zombies: 0)
refs: 89088 bytes: 364904448 (refs: 0 bytes: 0)
recycling: 100.0% (alloc: 1392:2331141604 recycle: 473625579:1857460661)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
|
Commit 25b146c5b8ce ("kbuild: allow Kbuild to start from any directory")
exported abs_srctree and abs_objtree to avoid recomputation after the
sub-make. However, this approach turned out to be fragile.
Commit 5fa94ceb793e ("kbuild: set correct abs_srctree and abs_objtree
for package builds") moved them above "ifneq ($(sub_make_done),1)",
eliminating the need for exporting them.
These are only needed in the top Makefile. If an absolute path is
required in sub-directories, you can use $(abspath ) or $(realpath )
as needed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
|
There is a spelling mistake in an error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240308084458.2045266-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'make_connection' is launched twice: once for IPv4, once for IPv6.
But then, the "pm_nl_ctl events" was launched a first time, killed, then
relaunched after for no particular reason.
We can then move this code, and the generation of the temp file to
exchange, to the init part, and remove extra conditions that no longer
needed.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-12-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2004: $/${} is unnecessary on arithmetic variables.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-11-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2154: optstring is referenced but not assigned.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-10-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
- SC2145: Argument mixes string and array. Use * or separate argument.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-9-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2181: Check exit code directly with e.g. 'if mycmd;', not
indirectly with $?.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2155: Declare and assign separately to avoid masking return
values.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2059: Don't use variables in the printf format string. Use printf
'..%s..' "$foo".
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-8-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
shellcheck recently helped to prevent issues. It is then good to fix the
other harmless issues in order to spot "real" ones later.
Here, two categories of warnings are now ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoked indirectly via the EXIT trap.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended, but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
For the modifications:
- SC2034: ksft_skip appears unused.
- SC2046: Quote '$(get_msk_inuse)' to prevent word splitting.
- SC2006: Use $(...) notation instead of legacy backticks `...`.
Now this script is shellcheck (0.9.0) compliant. We can easily spot new
issues.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-7-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid duplicated code in different MPTCP selftests, we can add and
use helpers defined in mptcp_lib.sh.
This patch unifies "pm_nl_ctl events" related code in userspace_pm.sh
and mptcp_join.sh into a helper mptcp_lib_events(). Define it in
mptcp_lib.sh and use it in both scripts.
Note that mptcp_lib_kill_wait is now call before starting 'events' for
mptcp_join.sh as well, but that's fine: each test is started from a new
netns, so there will not be any existing pid there, and nothing is done
when mptcp_lib_kill_wait is called with 0.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-6-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set more the default sysctl values in mptcp_lib_ns_init(). It is fine to
do that everywhere, because they could be overridden latter if needed.
mptcp_lib_ns_exit() now also try to remove temp netns files used for the
stats even for selftests not using them. That's fine to do that because
these files have a unique name.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-5-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers mptcp_lib_ns_init() and mptcp_lib_ns_exit() in mptcp_lib.sh
to initialize and delete the given namespaces. Then every test script
can invoke these helpers and use all namespaces.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-4-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds local variables rndh in do_transfer() functions both in
mptcp_connect.sh and simult_flows.sh, setting it with ${ns1:4}, not the
global variable rndh. The global one is hidden in the next commit.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-3-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch exports check_tools() helper from mptcp_join.sh into
mptcp_lib.sh as a public one mptcp_lib_check_tools(). The arguments
"ip", "ss", "iptables" and "ip6tables" are passed into this helper
to indicate whether to check ip tool, ss tool, iptables and ip6tables
tools.
This helper can be used in every scripts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-2-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if
available") and commit a5a5990c099d ("selftests: mptcp: sockopt: use
'iptables-legacy' if available") forced using iptables-legacy if
available.
This was needed because of some issues that were visible when testing
the kselftests on a v5.15.x with iptables-nft as default backend. It
looks like these errors are no longer present. As mentioned by Pablo [1],
the errors were maybe due to missing kernel config. We can then use
iptables-nft if it is the default one, instead of using a legacy tool.
We can then check the variables iptables and ip6tables are valid. We can
keep the variables to easily change it later or add options.
Link: https://lore.kernel.org/netdev/ZbFiixyMFpQnxzCH@calendula/ [1]
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240306-upstream-net-next-20240304-selftests-mptcp-shared-code-shellcheck-v2-1-bc79e6e5e6a0@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipv6_gc fails occasionally. According to the study, fib6_run_gc() using
jiffies_round() to round the GC interval could increase the waiting time up
to 750ms (3/4 seconds). The timer has a granularity of 512ms at the range
4s to 32s. That means a route with an expiration time E seconds can wait
for more than E * 2 + 1 seconds if the GC interval is also E seconds.
E * 2 + 2 seconds should be enough for waiting for removing routes.
Also remove a check immediately after replacing 5 routes since it is very
likely to remove some of routes before completing the last route with a
slow environment.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240305183949.258473-1-thinker.li@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nlctrl genetlink-legacy family uses nest-type-value encoding as
described in Documentation/userspace-api/netlink/genetlink-legacy.rst
Add nest-type-value decoding to ynl.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ynl-gen-c generates e.g. 'calloc(mcast_groups, sizeof(*dst->mcast_groups))'
for array-nest attrs when it should be 'n_mcast_groups'.
Add a 'n_' prefix in the generated code for array-nests.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ynl does not handle NlError exceptions so they get reported like program
failures. Handle the NlError exceptions and report the netlink errors
more cleanly.
Example now:
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Example before:
Traceback (most recent call last):
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 81, in <module>
main()
File "/home/donaldh/net-next/./tools/net/ynl/cli.py", line 69, in main
reply = ynl.dump(args.dump, attrs)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 906, in dump
return self._op(method, vals, [], dump=True)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/donaldh/net-next/tools/net/ynl/lib/ynl.py", line 872, in _op
raise NlError(nl_msg)
lib.ynl.NlError: Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2 extack: {'bad-attr': '.op'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extack decoding was using a hard-coded msg header size of 20 but
netlink-raw has a header size of 16.
Use a protocol specific msghdr_size() when decoding the attr offssets.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240306231046.97158-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It's not restricted to working with "internal" maps, it cares about any
map that can be mmap'ed. Reflect that in more succinct and generic name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/r/20240307031228.42896-6-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
__uint() macro that is used to specify map attributes like:
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(map_flags, BPF_F_MMAPABLE);
It is limited to 32-bit, since BTF_KIND_ARRAY has u32 "number of elements"
field in "struct btf_array".
Introduce __ulong() macro that allows specifying values bigger than 32-bit.
In map definition "map_extra" is the only u64 field, so far.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-5-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility documentation update for 6.9-rc1 from Shuah Khan:
"This cpupower update for Linux 6.9-rc1 consists of a single fix
to a typo in cpupower-frequency-info.1 man page."
* tag 'linux-cpupower-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
Fix cpupower-frequency-info.1 man page typo
|
|
'for-next/misc', 'for-next/daif-cleanup', 'for-next/kselftest', 'for-next/documentation', 'for-next/sysreg' and 'for-next/dpisa', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf: (39 commits)
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
drivers/perf: hisi_pcie: Merge find_related_event() and get_event_idx()
drivers/perf: hisi_pcie: Relax the check on related events
drivers/perf: hisi_pcie: Check the target filter properly
drivers/perf: hisi_pcie: Add more events for counting TLP bandwidth
drivers/perf: hisi_pcie: Fix incorrect counting under metric mode
drivers/perf: hisi_pcie: Introduce hisi_pcie_pmu_get_event_ctrl_val()
drivers/perf: hisi_pcie: Rename hisi_pcie_pmu_{config,clear}_filter()
drivers/perf: hisi: Enable HiSilicon Erratum 162700402 quirk for HIP09
perf/arm_cspmu: Add devicetree support
dt-bindings/perf: Add Arm CoreSight PMU
perf/arm_cspmu: Simplify counter reset
perf/arm_cspmu: Simplify attribute groups
perf/arm_cspmu: Simplify initialisation
...
* for-next/reorg-va-space:
: Reorganise the arm64 kernel VA space in preparation for LPA2 support
: (52-bit VA/PA).
arm64: kaslr: Adjust randomization range dynamically
arm64: mm: Reclaim unused vmemmap region for vmalloc use
arm64: vmemmap: Avoid base2 order of struct page size to dimension region
arm64: ptdump: Discover start of vmemmap region at runtime
arm64: ptdump: Allow all region boundaries to be defined at boot time
arm64: mm: Move fixmap region above vmemmap region
arm64: mm: Move PCI I/O emulation region above the vmemmap region
* for-next/rust-for-arm64:
: Enable Rust support for arm64
arm64: rust: Enable Rust support for AArch64
rust: Refactor the build target to allow the use of builtin targets
* for-next/misc:
: Miscellaneous arm64 patches
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
arm64: Remove enable_daif macro
arm64/hw_breakpoint: Directly use ESR_ELx_WNR for an watchpoint exception
arm64: cpufeatures: Clean up temporary variable to simplify code
arm64: Update setup_arch() comment on interrupt masking
arm64: remove unnecessary ifdefs around is_compat_task()
arm64: ftrace: Don't forbid CALL_OPS+CC_OPTIMIZE_FOR_SIZE with Clang
arm64/sme: Ensure that all fields in SMCR_EL1 are set to known values
arm64/sve: Ensure that all fields in ZCR_EL1 are set to known values
arm64/sve: Document that __SVE_VQ_MAX is much larger than needed
arm64: make member of struct pt_regs and it's offset macro in the same order
arm64: remove unneeded BUILD_BUG_ON assertion
arm64: kretprobes: acquire the regs via a BRK exception
arm64: io: permit offset addressing
arm64: errata: Don't enable workarounds for "rare" errata by default
* for-next/daif-cleanup:
: Clean up DAIF handling for EL0 returns
arm64: Unmask Debug + SError in do_notify_resume()
arm64: Move do_notify_resume() to entry-common.c
arm64: Simplify do_notify_resume() DAIF masking
* for-next/kselftest:
: Miscellaneous arm64 kselftest patches
kselftest/arm64: Test that ptrace takes effect in the target process
* for-next/documentation:
: arm64 documentation patches
arm64/sme: Remove spurious 'is' in SME documentation
arm64/fp: Clarify effect of setting an unsupported system VL
arm64/sme: Fix cut'n'paste in ABI document
arm64/sve: Remove bitrotted comment about syscall behaviour
* for-next/sysreg:
: sysreg updates
arm64/sysreg: Update ID_AA64DFR0_EL1 register
arm64/sysreg: Update ID_DFR0_EL1 register fields
arm64/sysreg: Add register fields for ID_AA64DFR1_EL1
* for-next/dpisa:
: Support for 2023 dpISA extensions
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
|
|
Donald points out that we don't check for overflows.
Stash the length of the message on nlmsg_pid (nlmsg_seq would
do as well). This allows the attribute helpers to remain
self-contained (no extra arguments). Also let the put
helpers continue to return nothing. The error is checked
only in (newly introduced) ynl_msg_end().
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240305185000.964773-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
|
|
Add the hwcaps added for the 2023 DPISA extensions to the hwcaps test
program.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-9-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Verify that a FPMR frame is generated on systems that support FPMR and not
generated otherwise.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-8-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Teach the generic signal frame parsing code about the newly added FPMR
frame, avoiding warnings every time one is generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240306-arm64-2023-dpisa-v5-7-c568edc8ed7f@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Always run fixture setup in the grandchild process, and by default also
run the teardown in the same process. However, this change makes it
possible to run the teardown in a parent process when
_metadata->teardown_parent is set to true (e.g. in fixture setup).
Fix TEST_SIGNAL() by forwarding grandchild's signal to its parent. Fix
seccomp tests by running the test setup in the parent of the test
thread, as expected by the related test code. Fix Landlock tests by
waiting for the grandchild before processing _metadata.
Use of exit(3) in tests should be OK because the environment in which
the vfork(2) call happen is already dedicated to the running test (with
flushed stdio, setpgrp() call), see __run_test() and the call to fork(2)
just before running the setup/test/teardown. Even if the test
configures its own exit handlers, they will not be run by the parent
because it never calls exit(3), and the test function either ends with a
call to _exit(2) or a signal.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240305201029.1331333-1-mic@digikod.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-5-namhyung@kernel.org
|
|
It's not used anymore and the code is coverted to use a hash map. Now
sym_hist has a static size, so no need to have sizeof_sym_hist in the
struct annotated_source.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-4-namhyung@kernel.org
|
|
Use annotated_source.samples hashmap instead of addr array in the
struct sym_hist.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-3-namhyung@kernel.org
|
|
Now symbol histogram uses an array to save per-offset sample counts.
But it wastes a lot of memory if the symbol has a few samples only.
Add a hashmap to save values only for actual samples.
For now, it has duplicate histogram (one in the existing array and
another in the new hash map). Once it can convert to use the hash
in all places, we can get rid of the array later.
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240304230815.1440583-2-namhyung@kernel.org
|
|
Two test cases to verify that '?' and other printable characters are
allowed in BTF DATASEC names:
- DATASEC with name "?.foo bar:buz" should be accepted;
- type with name "?foo" should be rejected.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-16-eddyz87@gmail.com
|
|
Check that "?.struct_ops" and "?.struct_ops.link" section names define
struct_ops maps with autocreate == false after open.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-14-eddyz87@gmail.com
|
|
Optional struct_ops maps are defined using question mark at the start
of the section name, e.g.:
SEC("?.struct_ops")
struct test_ops optional_map = { ... };
This commit teaches libbpf to detect if kernel allows '?' prefix
in datasec names, and if it doesn't then to rewrite such names
by replacing '?' with '_', e.g.:
DATASEC ?.struct_ops -> DATASEC _.struct_ops
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-13-eddyz87@gmail.com
|
|
Allow using two new section names for struct_ops maps:
- SEC("?.struct_ops")
- SEC("?.struct_ops.link")
To specify maps that have bpf_map->autocreate == false after open.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-12-eddyz87@gmail.com
|
|
The next patch would add two new section names for struct_ops maps.
To make working with multiple struct_ops sections more convenient:
- remove fields like elf_state->st_ops_{shndx,link_shndx};
- mark section descriptions hosting struct_ops as
elf_sec_desc->sec_type == SEC_ST_OPS;
After these changes struct_ops sections could be processed uniformly
by iterating bpf_object->efile.secs entries.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-11-eddyz87@gmail.com
|
|
Check that autocreate flags of struct_ops map cause autoload of
struct_ops corresponding programs:
- when struct_ops program is referenced only from a map for which
autocreate is set to false, that program should not be loaded;
- when struct_ops program with autoload == false is set to be used
from a map with autocreate == true using shadow var,
that program should be loaded;
- when struct_ops program is not referenced from any map object load
should fail.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240306104529.6453-10-eddyz87@gmail.com
|
