summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2024-04-12selftests: netfilter: conntrack_ipip_mtu.sh" move to lib.sh infraFlorian Westphal
Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-9-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: conntrack_vrf.sh: move to lib.sh infraFlorian Westphal
swap test for "ip" with "conntrack", former is already accounted for via setup_ns helper. Also switch to bash. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-8-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: conntrack_sctp_collision.sh: move to lib.sh infraFlorian Westphal
While at it, address warnings generated by shellcheck and fix following minor issues: - some distros place netem in 'extra' modules package, so add a skip check for netem-attach failure. - tc prints a warning for the 100mbit class: "Warning: sch_htb: quantum of class 10001 is big. Consider r2q change." Silence this by increasing the divisor. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-7-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: conntrack_tcp_unreplied.sh: move to lib.sh infraFlorian Westphal
Replace nc with socat. Too many different implementations of nc are around with incompatible options ("nc: cannot use -p and -l"). Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-6-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: conntrack_icmp_related.sh: move to lib.sh infraFlorian Westphal
Only relevant change is that netns names have random suffix names, i.e. its safe to run this in parallel with other tests. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-5-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: br_netfilter.sh: move to lib.sh infraFlorian Westphal
Also, fix two issues reported by Pablo Neira: 1. Must modprobe br_netfilter in case its not loaded, else sysctl cannot be set. 2. ping for netns4 fails if rp_filter is enabled in bridge netns, so set all and default to 0. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-4-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: bridge_brouter.sh: move to lib.sh infraFlorian Westphal
Doing so gets us dynamically generated netns names. Also: * do not assume rp_filter is disabled, if its on script failed * reduce timeout (-W) for "expected to fail" ping commands * don't print PASS line for basic sanity ping * shellcheck cleanups Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-3-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: netfilter: move to net subdirFlorian Westphal
.. so this can start re-using existing lib.sh infra in next patches. Several of these scripts will not work, e.g. because they assume rp_filter is disabled, or reliance on a particular version/flavor of "netcat" tool. Add config settings for them. nft_trans_stress.sh script is removed, it also exists in the nftables userspace selftests. I do not see a reason to keep two versions in different repositories/projects. The settings file is removed for now: It was used to increase the timeout to avoid slow scripts from getting zapped by the 45s timeout, but some of the slow scripts can be sped up. Re-add it later for scripts that cannot be sped up easily. Update MAINTAINERS to reflect that future updates to netfilter scripts should go through netfilter-devel@. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-2-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-12selftests: kselftest: Fix build failure with NOLIBCOleg Nesterov
As Mark explains ksft_min_kernel_version() can't be compiled with nolibc, it doesn't implement uname(). Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240412123536.GA32444@redhat.com Closes: https://lore.kernel.org/all/f0523b3a-ea08-4615-b0fb-5b504a2d39df@sirena.org.uk/
2024-04-12selftests: timers: Fix abs() warning in posix_timers testJohn Stultz
Building with clang results in the following warning: posix_timers.c:69:6: warning: absolute value function 'abs' given an argument of type 'long long' but has parameter of type 'int' which may cause truncation of value [-Wabsolute-value] if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) { ^ So switch to using llabs() instead. Fixes: 0bc4b0cf1570 ("selftests: add basic posix timers selftests") Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410232637.4135564-3-jstultz@google.com
2024-04-12selftests: kselftest: Mark functions that unconditionally call exit() as ↵Nathan Chancellor
__noreturn After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()"), clang warns: tools/testing/selftests/timers/../kselftest.h:398:6: warning: variable 'major' is used uninitialized whenever '||' condition is true [-Wsometimes-uninitialized] 398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2) | ^~~~~~~~~~~~ tools/testing/selftests/timers/../kselftest.h:401:9: note: uninitialized use occurs here 401 | return major > min_major || (major == min_major && minor >= min_minor); | ^~~~~ tools/testing/selftests/timers/../kselftest.h:398:6: note: remove the '||' if its condition is always false 398 | if (uname(&info) || sscanf(info.release, "%u.%u.", &major, &minor) != 2) | ^~~~~~~~~~~~~~~ tools/testing/selftests/timers/../kselftest.h:395:20: note: initialize the variable 'major' to silence this warning 395 | unsigned int major, minor; | ^ | = 0 This is a false positive because if uname() fails, ksft_exit_fail_msg() will be called, which unconditionally calls exit(), a noreturn function. However, clang does not know that ksft_exit_fail_msg() will call exit() at the point in the pipeline that the warning is emitted because inlining has not occurred, so it assumes control flow will resume normally after ksft_exit_fail_msg() is called. Make it clear to clang that all of the functions that call exit() unconditionally in kselftest.h are noreturn transitively by marking them explicitly with '__attribute__((__noreturn__))', which clears up the warning above and any future warnings that may appear for the same reason. Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Reported-by: John Stultz <jstultz@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240411-mark-kselftest-exit-funcs-noreturn-v1-1-b027c948f586@kernel.org Closes: https://lore.kernel.org/all/20240410232637.4135564-2-jstultz@google.com/
2024-04-12selftests: timers: Fix posix_timers ksft_print_msg() warningJohn Stultz
After commit 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") the following warning occurs when building with an older gcc: posix_timers.c:250:2: warning: format not a string literal and no format arguments [-Wformat-security] 250 | ksft_print_msg(errmsg); | ^~~~~~~~~~~~~~ Fix this up by changing it to ksft_print_msg("%s", errmsg) Fixes: 6d029c25b71f ("selftests/timers/posix_timers: Reimplement check_timer_distribution()") Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Justin Stitt <justinstitt@google.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410232637.4135564-1-jstultz@google.com
2024-04-11Merge tag 'cxl-fixes-6.9-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Dave Jiang: - Fix index of Clear Event Record handles in cxl_clear_event_record() - Fix use before init of map->reg_type in cxl_decode_regblock() - Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log() - Fix CXL path access_coordinate computation: - Remove unneded check of iter in loop - Fix of retrieving of access_coordinate in PCI topology walk - Fix of incorrect region access_coordinate data calculation - Consolidate of access_coordinates attached to downstream port context - Add check to validate access_coordinate validity to prevent incorrect data being exposed via sysfs * tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl: Add checks to access_coordinate calculation to fail missing data cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord cxl: Fix incorrect region perf data calculation cxl: Fix retrieving of access_coordinates in PCIe path cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates() cxl/core: Fix initialization of mbox_cmd.size_out in get event cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned cxl/mem: Fix for the index of Clear Event Record Handle
2024-04-11Merge tag 'hyperv-fixes-signed-20240411' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian) - Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves) - Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format (Shradha Gupta) - Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe and Michael Kelley) * tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted uio_hv_generic: Don't free decrypted memory hv_netvsc: Don't free decrypted memory Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format hv: vmbus: Convert sprintf() family to sysfs_emit() family mshyperv: Introduce hv_numa_node_to_pxm_info() x86/hyperv: Cosmetic changes for hv_apic.c
2024-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/unix/garbage.c 47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset") b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c 7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()") 194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions") drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 958f56e48385 ("net/mlx5e: Un-expose functions in en.h") 49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11selftests: mptcp: test last time mptcp_infoGeliang Tang
This patch adds a new helper chk_msk_info() to show the counters in mptcp_info of the given info, and check that the timestamps move forward. Use it to show newly added last_data_sent, last_data_recv and last_ack_recv in mptcp_info in chk_last_time_info(). Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240410-upstream-net-next-20240405-mptcp-last-time-info-v2-2-f95bd6b33e51@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10selftests: fib_rule_tests: Add VRF testsIdo Schimmel
After commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices") it is possible to configure FIB rules that match on iif / oif being a l3mdev port. It was not possible before as these parameters were reset to the ifindex of the l3mdev device itself prior to the FIB rules lookup. Add tests that cover this functionality as it does not seem to be covered by existing ones and I am aware of at least one user that needs this functionality in addition to the one mentioned in [1]. Reuse the existing FIB rules tests by simply configuring a VRF prior to the test and removing it afterwards. Differentiate the output of the non-VRF tests from the VRF tests by appending "(VRF)" to the test name if a l3mdev FIB rule is present. Verified that these tests do fail on kernel 5.15.y which does not include the previously mentioned commit: # ./fib_rule_tests.sh -t fib_rule6_vrf [...] TEST: rule6 check: oif redirect to table (VRF) [FAIL] [...] TEST: rule6 check: iif redirect to table (VRF) [FAIL] # ./fib_rule_tests.sh -t fib_rule4_vrf [...] TEST: rule4 check: oif redirect to table (VRF) [FAIL] [...] TEST: rule4 check: iif redirect to table (VRF) [FAIL] [1] https://lore.kernel.org/netdev/20200922131122.GB1601@ICIPI.localdomain/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240409110816.2508498-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile formatShradha Gupta
If the network configuration strings are passed as a combination of IPv4 and IPv6 addresses, the current KVP daemon does not handle processing for the keyfile configuration format. With these changes, the keyfile config generation logic scans through the list twice to generate IPv4 and IPv6 sections for the configuration files to handle this support. Testcases ran:Rhel 9, Hyper-V VMs (IPv4 only, IPv6 only, IPv4 and IPv6 combination) Co-developed-by: Ani Sinha <anisinha@redhat.com> Signed-off-by: Ani Sinha <anisinha@redhat.com> Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Tested-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Link: https://lore.kernel.org/r/1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1711115162-11629-1-git-send-email-shradhagupta@linux.microsoft.com>
2024-04-10selftests: net: reuse common code in bpf_offloadJakub Kicinski
net/lib/py/nsim.py already contains the most useful parts of the netdevsim wrapper classes. Reuse them. Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240409031549.3531084-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10selftests: net: declare section names for bpf_offloadJakub Kicinski
Non-ancient ip (iproute2-5.15.0, libbpf 0.7.0) refuses to load the sample with maps because we don't generate BTF: libbpf: BTF is required, but is missing or corrupted. ERROR: opening BPF object file failed Enable BTF by adding -g to clang flags. With that done neither of the programs load: libbpf: prog 'func': error relocating .BTF.ext function info: -22 libbpf: prog 'func': failed to relocate calls: -22 libbpf: failed to load object 'ksft-net-drv/net/sample_ret0.bpf.o' Andrii explains that this is because we don't specify section names for the code. Add the section names, too. Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240409031549.3531084-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10selftests: net: bpf_offload: wait for mapsJakub Kicinski
Maps are removed asynchronously. Either there's a bigger delay now or the test has always been flaky. Retry waiting in the loop. Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240409031549.3531084-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10selftests: move bpf-offload test from bpf to netJakub Kicinski
We're building more python tests on the netdev side, and some of the classes from the venerable BPF offload tests can be reused. Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20240409031549.3531084-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10Merge tag 'turbostat-2024.04.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Use of the CPU MSR driver is now optional - Perf is now preferred for many counters - Non-root users can now execute turbostat, though with limited functionality - Add counters for some new GFX hardware - Minor fixes * tag 'turbostat-2024.04.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (26 commits) tools/power turbostat: v2024.04.10 tools/power/turbostat: Add support for Xe sysfs knobs tools/power/turbostat: Add support for new i915 sysfs knobs tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz tools/power/turbostat: Fix uncore frequency file string tools/power/turbostat: Unify graphics sysfs snapshots tools/power/turbostat: Cache graphics sysfs path tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICX tools/power turbostat: Add selftests tools/power turbostat: read RAPL counters via perf tools/power turbostat: Add proper re-initialization for perf file descriptors tools/power turbostat: Clear added counters when in no-msr mode tools/power turbostat: add early exits for permission checks tools/power turbostat: detect and disable unavailable BICs at runtime tools/power turbostat: Add reading aperf and mperf via perf API tools/power turbostat: Add --no-perf option tools/power turbostat: Add --no-msr option tools/power turbostat: enhance -D (debug counter dump) output tools/power turbostat: Fix warning upon failed /dev/cpu_dma_latency read tools/power turbostat: Read base_hz and bclk from CPUID.16H if available ...
2024-04-10selftests: timers: Fix valid-adjtimex signed left-shift undefined behaviorJohn Stultz
The struct adjtimex freq field takes a signed value who's units are in shifted (<<16) parts-per-million. Unfortunately for negative adjustments, the straightforward use of: freq = ppm << 16 trips undefined behavior warnings with clang: valid-adjtimex.c:66:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value] -499<<16, ~~~~^ valid-adjtimex.c:67:6: warning: shifting a negative signed value is undefined [-Wshift-negative-value] -450<<16, ~~~~^ .. Fix it by using a multiply by (1 << 16) instead of shifting negative values in the valid-adjtimex test case. Align the values for better readability. Reported-by: Lee Jones <joneslee@google.com> Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20240409202222.2830476-1-jstultz@google.com Link: https://lore.kernel.org/lkml/0c6d4f0d-2064-4444-986b-1d1ed782135f@collabora.com/
2024-04-10tools/power turbostat: v2024.04.10Len Brown
Much of turbostat can now run with perf, rather than using the MSR driver Some of turbostat can now run as a regular non-root user. Add some new output columns for some new GFX hardware. [This patch updates the version, but otherwise changes no function; it touches up some checkpatch issues from previous patches] Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-10tools/power/turbostat: Add support for Xe sysfs knobsZhang Rui
Xe graphics driver uses different graphics sysfs knobs including /sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms /sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq /sys/class/drm/card0/device/tile0/gt0/freq0/act_freq /sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms /sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq /sys/class/drm/card0/device/tile0/gt1/freq0/act_freq Plus that, /sys/class/drm/card0/device/tile0/gt<n>/gtidle/name returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media. Enhance turbostat to prefer the Xe sysfs knobs when they are available. Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz. Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10tools/power/turbostat: Add support for new i915 sysfs knobsZhang Rui
On Meteorlake platform, i915 driver supports the traditional graphics sysfs knobs including /sys/class/drm/card0/power/rc6_residency_ms /sys/class/drm/card0/gt_cur_freq_mhz /sys/class/drm/card0/gt_act_freq_mhz At the same time, it also supports /sys/class/drm/card0/gt/gt0/rc6_residency_ms /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz /sys/class/drm/card0/gt/gt1/rc6_residency_ms /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz gt0 is for GFX and gt1 is for SA Media. Enhance turbostat to prefer the i915 new sysfs knobs. Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz. Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHzZhang Rui
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media information via different sysfs knobs. Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for GFX. Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-09tools/power/turbostat: Fix uncore frequency file stringJustin Ernst
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with: turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory We observe the sysfs uncore frequency directories named: ... package_09_die_00/ package_10_die_00/ package_11_die_00/ ... package_15_die_00/ The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used with each instance of reading uncore frequency files. uncore-frequency-common.c creates the sysfs directory with the format "package_%02d_die_%02d". Once the package value reaches double digits, the formats diverge. Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d". [lenb: deleted the probe part of this patch, as it was already fixed] Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Unify graphics sysfs snapshotsZhang Rui
Graphics sysfs snapshots share similar logic. Combine them into one function to avoid code duplication. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Cache graphics sysfs pathZhang Rui
Graphics drivers (i915/Xe) have different sysfs knobs on different platforms, and it is possible that different sysfs knobs fit into the same turbostat columns. Instead of specifying different sysfs knobs every time, detect them once and cache the path for future use. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICXZhang Rui
Enable Core C1 hardware residency counter (MSR_CORE_C1_RES) on ICX. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power turbostat: Add selftestsPatryk Wlazlyn
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power turbostat: read RAPL counters via perfPatryk Wlazlyn
Some of the future Intel platforms will require reading the RAPL counters via perf and not MSR. On current platforms we can still read them using both ways. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09selftests/timers/posix_timers: Reimplement check_timer_distribution()Oleg Nesterov
check_timer_distribution() runs ten threads in a busy loop and tries to test that the kernel distributes a process posix CPU timer signal to every thread over time. There is not guarantee that this is true even after commit bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread") because that commit only avoids waking up the sleeping process leader thread, but that has nothing to do with the actual signal delivery. As the signal is process wide the first thread which observes sigpending and wins the race to lock sighand will deliver the signal. Testing shows that this hangs on a regular base because some threads never win the race. The comment "This primarily tests that the kernel does not favour any one." is wrong. The kernel does favour a thread which hits the timer interrupt when CLOCK_PROCESS_CPUTIME_ID expires. Rewrite the test so it only checks that the group leader sleeping in join() never receives SIGALRM and the thread which burns CPU cycles receives all signals. In older kernels which do not have commit bcb7ee79029d ("posix-timers: Prefer delivery of signals to the current thread") the test-case fails immediately, the very 1st tick wakes the leader up. Otherwise it quickly succeeds after 100 ticks. CI testing wants to use newer selftest versions on stable kernels. In this case the test is guaranteed to fail. So check in the failure case whether the kernel version is less than v6.3 and skip the test result in that case. [ tglx: Massaged change log, renamed the version check helper ] Fixes: e797203fb3ba ("selftests/timers/posix_timers: Test delivery of signals across threads") Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
2024-04-08Merge tag 'fixes-2024-04-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fixes from Mike Rapoport: "Fix build errors in memblock tests: - add stubs to functions that calls to them were recently added to memblock but they were missing in tests - update gfp_types.h to include bits.h so that BIT() definitions won't depend on other includes" * tag 'fixes-2024-04-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix undefined reference to `BIT' memblock tests: fix undefined reference to `panic' memblock tests: fix undefined reference to `early_pfn_to_nid'
2024-04-08cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coordDave Jiang
The driver stores access_coordinate for host bridge in ->hb_coord and switch CDAT access_coordinate in ->sw_coord. Since neither of these access_coordinate clobber each other, the variable name can be consolidated into ->coord to simplify the code. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20240403154844.3403859-5-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2024-04-08selftests: mptcp: netlink: drop disable=SC2086Geliang Tang
Now there are only a few of variables are not using double quotes. Modifying them, then "shellcheck disable=SC2086" can be dropped. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: ip_mptcp option for more scriptsGeliang Tang
This patch adds '-i' option for mptcp_sockopt.sh, pm_netlink.sh, and simult_flows.sh, to use 'ip mptcp' command in the tests instead of 'pm_nl_ctl'. Update usage() correspondingly. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: use pm_nl endpoint opsGeliang Tang
Use those newly added pm_nl endpoint ops helpers to replace all 'pm_nl_ctl' commands with 'limits', 'add', 'del', 'flush', 'show' and 'set' arguments in scripts mptcp_sockopt.sh and simult_flows.sh. In pm_netlink.sh, add wrappers of there helpers to make the function names shorter. Then use the wrappers to replace all 'pm_nl_ctl' commands. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: export pm_nl endpoint opsGeliang Tang
This patch exports six endpoint operation helpers with pm_nl_ prefix, pm_nl_set_limits(), pm_nl_add_endpoint(), pm_nl_del_endpoint(), pm_nl_flush_endpoint(), pm_nl_show_endpoints() and pm_nl_change_endpoint() into mptcp_lib.sh as public functions, and renamed each of them with a mptcp_lib_ prefix. Then these old pm_nl_ prefix helpers in mptcp_join.sh can be wrappers of mptcp_lib_ prefix ones. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: join: update endpoint opsGeliang Tang
This patch uses 'case' statements to simplify pm_nl_add_endpoint() and pm_nl_check_endpoint(). And simplify pm_nl_check_endpoint() with check_output() helper. Also update pm_nl_del_endpoint() to avoid the 'double quote' shellcheck warning. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: netlink: add change_address helperGeliang Tang
The output formats of 'ip mptcp' commands are much different from that of 'pm_nl_ctl' commands. A new 'change_address' helper is added here, to change the flag of an address. This is a bit similar to mptcp_join.sh's pm_nl_change_endpoint(). Usage: Address ID - pm_nl_change_endpoint $ns id $id $flags IP address - change_address $ns $addr $flags Use this new helper in pm_netlink.sh to replace all 'pm_nl_ctl set' commands. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: add {get,format}_endpoint(s) helpersGeliang Tang
The output formats of 'ip mptcp' commands are much different from that of 'pm_nl_ctl' commands. This patch adds a new helper format_endpoints() to format the outputs of 'ip mptcp' and 'pm_nl_ctl' with 'endpoints' arguments to hide these differences. A new helper named get_endpoint() has also been added to show a specific endpoint identified by the given address ID, similar to mptcp_join.sh's pm_nl_show_endpoints() helper, but showing all entries. Use these two helpers in mptcp_join.sh and pm_netlink.sh to replace all 'pm_nl_ctl get' commands and outputs of 'pm_nl_ctl dump/get'. Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: netlink: add 'limits' helpersGeliang Tang
The output format of 'ip mptcp limits' command is much different from that of 'pm_nl_ctl limits' command. This patch adds format_limits() helper to format the outputs of these two commands to hide the difference. get_limits() has been added to show the limits. Use these two helpers in pm_netlink.sh to replace all 'pm_nl_ctl limits' commands and outputs. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: export ip_mptcp to mptcp_libGeliang Tang
This patch exports ip_mptcp into mptcp_lib.sh as a public variable, named MPTCP_LIB_IP_MPTCP. Add a helper mptcp_lib_set_ip_mptcp() to set it, and a helper mptcp_lib_is_ip_mptcp() to test whether it is set. Use these two helpers in mptcp_join.sh. This patch is prepared for coming commits. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: add ms units for tc-netem delayGeliang Tang
'delay 1' in tc-netem is confusing, not sure if it's a delay of 1 second or 1 millisecond. This patch explicitly adds millisecond units to make these commands clearer. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: mptcp: add tc check for check_toolsGeliang Tang
tc are used in some test scripts: mptcp_connect.sh, mptcp_join.sh and simult_flows.sh. It makes sense to check if tc is installed before running these scripts, just like other tools. So this patch add 'tc' check for mptcp_lib_check_tools(), and check it in these test scripts. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08testing: net-drv: add a driver test for stats reportingJakub Kicinski
Add a very simple test to make sure drivers report expected stats. Drivers which implement FEC or pause configuration should report relevant stats. Qstats must be reported, at least packet and byte counts, and they must match total device stats. Tested with netdevsim, bnxt, in-tree and installed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08selftests: drivers: add scaffolding for Netlink tests in PythonJakub Kicinski
Add drivers/net as a target for mixed-use tests. The setup is expected to work similarly to the forwarding tests. Since we only need one interface (unlike forwarding tests) read the target device name from NETIF. If not present we'll try to run the test against netdevsim. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-07-15 16:48:33 +0000