summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2018-05-03selftests: forwarding: Use sysctl_set(), sysctl_restore()Petr Machata
Instead of hand-managing the sysctl set and restore, use the wrappers sysctl_set() and sysctl_restore() to do the bookkeeping automatically. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()Petr Machata
Add two helper functions: sysctl_set() to change the value of a given sysctl setting, and sysctl_restore() to change it back to what it was. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03selftests: forwarding: Allow running specific testsIdo Schimmel
Similar to commit a511858c7536 ("selftests: fib_tests: Allow user to run a specific test"), allow user to run only a subset of the tests using the TESTS environment variable. This is useful when not all the tests can pass on a given system. Example: # export TESTS="ping_ipv4 ping_ipv6" # ./bridge_vlan_aware.sh TEST: ping [PASS] TEST: ping6 [PASS] Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03selftests: forwarding: Increase maximum deviation in multipath testIdo Schimmel
We sometimes observe failures in the test due to too large discrepancy between the measured and expected ratios. For example: TEST: ECMP [FAIL] Too large discrepancy between expected and measured ratios INFO: Expected ratio 1.00 Measured ratio 1.11 Fix this by allowing an up to 15% deviation between both ratios. Another possibility is to increase the number of generated flows, but this will prolong the execution time of the test, which is already quite high. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03tc-testing: Updated csum action tests batch create w/wo cookies.Craig Dillabaugh
Signed-off-by: Craig Dillabaugh <cdillaba@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Several BPF sockmap fixes mostly related to bugs in error path handling, that is, a bug in updating the scatterlist length / offset accounting, a missing sk_mem_uncharge() in redirect error handling, and a bug where the outstanding bytes counter sg_size was not zeroed, from John. 2) Fix two memory leaks in the x86-64 BPF JIT, one in an error path where we still don't converge after image was allocated and another one where BPF calls are used and JIT passes don't converge, from Daniel. 3) Minor fix in BPF selftests where in test_stacktrace_build_id() we drop useless args in urandom_read and we need to add a missing newline in a CHECK() error message, from Song. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-01selftest: add test for TCP_INQSoheil Hassas Yeganeh
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02bpf: minor fix to selftest test_stacktrace_build_id()Song Liu
1. remove useless parameter list to ./urandom_read 2. add missing "\n" to the end of an error message Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-01tools: bpftool: change time format for program 'loaded at:' informationQuentin Monnet
To make eBPF program load time easier to parse from "bpftool prog" output for machines, change the time format used by the program. The format now differs for plain and JSON version: - Plain version uses a string formatted according to ISO 8601. - JSON uses the number of seconds since the Epoch, wich is less friendly for humans but even easier to process. Example output: # ./bpftool prog 41298: xdp tag a04f5eef06a7f555 dev foo loaded_at 2018-04-18T17:19:47+0100 uid 0 xlated 16B not jited memlock 4096B # ./bpftool prog -p [{ "id": 41298, "type": "xdp", "tag": "a04f5eef06a7f555", "gpl_compatible": false, "dev": { "ifindex": 14, "ns_dev": 3, "ns_inode": 4026531993, "ifname": "foo" }, "loaded_at": 1524068387, "uid": 0, "bytes_xlated": 16, "jited": false, "bytes_memlock": 4096 } ] Previously, "Apr 18/17:19" would be used at both places. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-30tools, include: Grab a copy of linux/erspan.hWilliam Tu
Bring the erspan uapi header file so BPF tunnel helpers can use it. Fixes: 933a741e3b82 ("selftests/bpf: bpf tunnel test.") Reported-by: Yonghong Song <yhs@fb.com> Signed-off-by: William Tu <u9012063@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-30bpf: update bpf.h uapi header for toolsQuentin Monnet
Bring fixes for eBPF helper documentation formatting to bpf.h under tools/ as well. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-29selftests: net: tcp_mmap must use TCP_ZEROCOPY_RECEIVEEric Dumazet
After prior kernel change, mmap() on TCP socket only reserves VMA. We have to use getsockopt(fd, IPPROTO_TCP, TCP_ZEROCOPY_RECEIVE, ...) to perform the transfert of pages from skbs in TCP receive queue into such VMA. struct tcp_zerocopy_receive { __u64 address; /* in: address of mapping */ __u32 length; /* in/out: number of bytes to map/mapped */ __u32 recv_skip_hint; /* out: amount of bytes to skip */ }; After a successful getsockopt(...TCP_ZEROCOPY_RECEIVE...), @length contains number of bytes that were mapped, and @recv_skip_hint contains number of bytes that should be read using conventional read()/recv()/recvmsg() system calls, to skip a sequence of bytes that can not be mapped, because not properly page aligned. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Andy Lutomirski <luto@kernel.org> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti fixes from Thomas Gleixner: "A set of updates for the x86/pti related code: - Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the int$80 entry code removed that quite some time ago. Make it correct again. - A set of fixes for the Global Bit work which went into 4.17 and caused a bunch of interesting regressions: - Triggering a BUG in the page attribute code due to a missing check for early boot stage - Warnings in the page attribute code about holes in the kernel text mapping which are caused by the freeing of the init code. Handle such holes gracefully. - Reduce the amount of kernel memory which is set global to the actual text and do not incidentally overlap with data. - Disable the global bit when RANDSTRUCT is enabled as it partially defeats the hardening. - Make the page protection setup correct for vma->page_prot population again. The adjustment of the protections fell through the crack during the Global bit rework and triggers warnings on machines which do not support certain features, e.g. NX" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64/compat: Preserve r8-r11 in int $0x80 x86/pti: Filter at vma->vm_page_prot population x86/pti: Disallow global kernel text with RANDSTRUCT x86/pti: Reduce amount of kernel text allowed to be Global x86/pti: Fix boot warning from Global-bit setting x86/pti: Fix boot problems from Global-bit setting
2018-04-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "The perf update contains the following bits: x86: - Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP perf stat: - Keep the '/' event modifier separator in fallback, for example when fallbacking from 'cpu/cpu-cycles/' to user level only, where it should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri Olsa) - Fix PMU events parsing rule, improving error reporting for invalid events (Jiri Olsa) - Disable write_backward and other event attributes for !group events in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S' that has leader sampling (:S) and where just the 'cycles', the leader event, should have the write_backward attribute set, in this case it all fails because the PMU where 'msr/aperf/' lives doesn't accepts write_backward style sampling (Jiri Olsa) - Only fall back group read for leader (Kan Liang) - Fix core PMU alias list for x86 platform (Kan Liang) - Print out hint for mixed PMU group error (Kan Liang) - Fix duplicate PMU name for interval print (Kan Liang) Core: - Set main kernel end address properly when reading kernel and module maps (Namhyung Kim) perf mem: - Fix incorrect entries and add missing man options (Sangwon Hong) s/390: - Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter) - Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390 - Fix s390 undefined record__auxtrace_init() return value in 'perf record' (Thomas Richter)" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1 perf stat: Fix duplicate PMU name for interval print perf evsel: Only fall back group read for leader perf stat: Print out hint for mixed PMU group error perf pmu: Fix core PMU alias list for X86 platform perf record: Fix s390 undefined record__auxtrace_init() return value perf mem: Document incorrect and missing options perf evsel: Disable write_backward for leader sampling group events perf pmu: Fix pmu events parsing rule perf stat: Keep the / modifier separator in fallback perf test: Adapt test case record+probe_libc_inet_pton.sh for s390 perf list: Remove s390 specific strcmp_cpuid_cmp function perf machine: Set main kernel end address properly
2018-04-29bpf: Sync bpf.h to tools/Andrey Ignatov
The patch syncs bpf.h to tools/. Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29tools/bpf: add a test for bpf_get_stack with tracepoint progYonghong Song
The test_stacktrace_map and test_stacktrace_build_id are enhanced to call bpf_get_stack in the helper to get the stack trace as well. The stack traces from bpf_get_stack and bpf_get_stackid are compared to ensure that for the same stack as represented as the same hash, their ip addresses or build id's must be the same. Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29tools/bpf: add a test for bpf_get_stack with raw tracepoint progYonghong Song
The test attached a raw_tracepoint program to raw_syscalls/sys_enter. It tested to get stack for user space, kernel space and user space with build_id request. It also tested to get user and kernel stack into the same buffer with back-to-back bpf_get_stack helper calls. If jit is not enabled, the user space application will check to ensure that the kernel function for raw_tracepoint ___bpf_prog_run is part of the stack. If jit is enabled, we did not have a reliable way to verify the kernel stack, so just assume the kernel stack is good when the kernel stack size is greater than 0. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29tools/bpf: add a verifier test case for bpf_get_stack helper and ARSHYonghong Song
The test_verifier already has a few ARSH test cases. This patch adds a new test case which takes advantage of newly improved verifier behavior for bpf_get_stack and ARSH. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29samples/bpf: move common-purpose trace functions to selftestsYonghong Song
There is no functionality change in this patch. The common-purpose trace functions, including perf_event polling and ksym lookup, are moved from trace_output_user.c and bpf_load.c to selftests/bpf/trace_helpers.c so that these function can be reused later in selftests. Acked-by: Alexei Starovoitov <ast@fb.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29tools/bpf: add bpf_get_stack helper to tools headersYonghong Song
The tools header file bpf.h is synced with kernel uapi bpf.h. The new helper is also added to bpf_helpers.h. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-27selftests: Fix lib.mk run_tests target shell scriptMathieu Desnoyers
Within run_tests target, the whole script needs to be executed within the same shell and not as separate subshells, so the initial test_num variable set to 0 is still present when executing "test_num=`echo $$test_num+1 | bc`;". Demonstration of the issue (make run_tests): TAP version 13 (standard_in) 1: syntax error selftests: basic_test ======================================== ok 1.. selftests: basic_test [PASS] (standard_in) 1: syntax error selftests: basic_percpu_ops_test ======================================== ok 1.. selftests: basic_percpu_ops_test [PASS] (standard_in) 1: syntax error selftests: param_test ======================================== ok 1.. selftests: param_test [PASS] With fix applied: TAP version 13 selftests: basic_test ======================================== ok 1..1 selftests: basic_test [PASS] selftests: basic_percpu_ops_test ======================================== ok 1..2 selftests: basic_percpu_ops_test [PASS] selftests: param_test ======================================== ok 1..3 selftests: param_test [PASS] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 1f87c7c15d7 ("selftests: lib.mk: change RUN_TESTS to print messages in TAP13 format") CC: Shuah Khan <shuahkh@osg.samsung.com> CC: linux-kselftest@vger.kernel.org Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-04-27selftests: forwarding: Test changes in mirror-to-gretapPetr Machata
These tests set up mirroring in a situation that the configuration is incorrect, i.e. mirrored packets, if any, are not supposed to reach destination tunnel device. Then the configuration is rectified and mirroring is checked to have started working. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Test neighbor updates when mirroring to gretapPetr Machata
Test that when a mirror to gretap or ip6gretap netdevice is configured, changes to neighbors are reflected. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Test flower mirror to gretapPetr Machata
Add a test for mirroring to a gretap and an ip6gretap netdevices such that the mirroring action is triggered by a flower match. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Test mirror to gretap w/ bound devPetr Machata
Test mirroring to a gretap and an ip6gretap netdevice with a bound device, where the tunnel device and the bound device are in different VRFs (an overlay / underlay configuration). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Test gretap mirror with next-hop remotePetr Machata
Test mirror to a gretap and an ip6gretap netdevice such that the remote address of the tunnel is reachable through a next-hop route. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Add test for mirror to gretapPetr Machata
Add a test for basic mirroring to gretap and ip6gretap netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: forwarding: Add libs for gretap mirror testingPetr Machata
To simplify implementation of mirror-to-gretap tests, extend lib.sh with several new functions that might potentially be useful more broadly (although right now the mirroring tests will be the only client). Also add mirror_lib.sh with code useful for mirroring tests, mirror_gre_lib.sh with code specifically useful for mirror-to-gretap tests, and mirror_gre_topo.sh that primes a given test with a good baseline topology that the test can then tweak to its liking. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: pmtu: Minimum MTU for vti6 is 68Stefano Brivio
A vti6 interface can carry IPv4 packets too. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDEDAnders Roxell
Script in_netns.sh is a utility function and not its own test so it shouldn't be part of the TEST_PROGS. The in_netns.sh get used by run_afpackettests. To install in_netns.sh without being added to the main run_kselftest.sh script use the TEST_GEN_PROGS_EXTENDED variable. Fixes: 5ff9c1a3dd92 ("selftests: net: add in_netns.sh to TEST_PROGS") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27Merge tag 'driver-core-4.17-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are some small driver core and firmware fixes for 4.17-rc3 There's a kobject WARN() removal to make syzkaller a lot happier about some "normal" error paths that it keeps hitting, which should reduce the number of false-positives we have been getting recently. There's also some fimware test and documentation fixes, and the coredump() function signature change that needed to happen after -rc1 before drivers started to take advantage of it. All of these have been in linux-next with no reported issues" * tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: some documentation fixes selftests:firmware: fixes a call to a wrong function name kobject: don't use WARN for registration failures firmware: Fix firmware documentation for recent file renames test_firmware: fix setting old custom fw path back on exit, second try test_firmware: Install all scripts drivers: change struct device_driver::coredump() return type to void
2018-04-27x86/entry/64/compat: Preserve r8-r11 in int $0x80Andy Lutomirski
32-bit user code that uses int $80 doesn't care about r8-r11. There is, however, some 64-bit user code that intentionally uses int $0x80 to invoke 32-bit system calls. From what I've seen, basically all such code assumes that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I doubt that there's any code that depends on int $0x80 zeroing r8-r11, change the kernel to preserve them. I suspect that very little user code is broken by the old clobber, since r8-r11 are only rarely allocated by gcc, and they're clobbered by function calls, so they only way we'd see a problem is if the same function that invokes int $0x80 also spills something important to one of these registers. The current behavior seems to date back to the historical commit "[PATCH] x86-64 merge for 2.6.4". Before that, all regs were preserved. I can't find any explanation of why this change was made. Update the test_syscall_vdso_32 testcase as well to verify the new behavior, and it strengthens the test to make sure that the kernel doesn't accidentally permute r8..r15. Suggested-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Link: https://lkml.kernel.org/r/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org
2018-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-04-27 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add extensive BPF helper description into include/uapi/linux/bpf.h and a new script bpf_helpers_doc.py which allows for generating a man page out of it. Thus, every helper in BPF now comes with proper function signature, detailed description and return code explanation, from Quentin. 2) Migrate the BPF collect metadata tunnel tests from BPF samples over to the BPF selftests and further extend them with v6 vxlan, geneve and ipip tests, simplify the ipip tests, improve documentation and convert to bpf_ntoh*() / bpf_hton*() api, from William. 3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only access stack and packet memory. Extend this to allow such helpers to also use map values, which enabled use cases where value from a first lookup can be directly used as a key for a second lookup, from Paul. 4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in order to retrieve XFRM state information containing SPI, peer address and reqid values, from Eyal. 5) Various optimizations in nfp driver's BPF JIT in order to turn ADD and SUB instructions with negative immediate into the opposite operation with a positive immediate such that nfp can better fit small immediates into instructions. Savings in instruction count up to 4% have been observed, from Jakub. 6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info and add support for dumping this through bpftool, from Jiri. 7) Move the BPF sockmap samples over into BPF selftests instead since sockmap was rather a series of tests than sample anyway and this way this can be run from automated bots, from John. 8) Follow-up fix for bpf_adjust_tail() helper in order to make it work with generic XDP, from Nikita. 9) Some follow-up cleanups to BTF, namely, removing unused defines from BTF uapi header and renaming 'name' struct btf_* members into name_off to make it more clear they are offsets into string section, from Martin. 10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since not run directly but invoked from test_sock_addr.sh, from Yonghong. 11) Remove redundant ret assignment in sample BPF loader, from Wang. 12) Add couple of missing files to BPF selftest's gitignore, from Anders. There are two trivial merge conflicts while pulling: 1) Remove samples/sockmap/Makefile since all sockmap tests have been moved to selftests. 2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the file since git should ignore all of them. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26Merge tag 'trace-v4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Add workqueue forward declaration (for new work, but a nice clean up) - seftest fixes for the new histogram code - Print output fix for hwlat tracer - Fix missing system call events - due to change in x86 syscall naming - Fix kprobe address being used by perf being hashed * tag 'trace-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix missing tab for hwlat_detector print format selftests: ftrace: Add a testcase for multiple actions on trigger selftests: ftrace: Fix trigger extended error testcase kprobes: Fix random address output of blacklist file tracing: Fix kernel crash while using empty filter with perf tracing/x86: Update syscall trace events to handle new prefixed syscall func names tracing: Add missing forward declaration
2018-04-27bpf: update bpf.h uapi header for toolsQuentin Monnet
Update tools/include/uapi/linux/bpf.h file in order to reflect the changes for BPF helper functions documentation introduced in previous commits. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-27selftests/bpf: bpf tunnel test.William Tu
The patch migrates the original tests at samples/bpf/tcbpf2_kern.c and samples/bpf/test_tunnel_bpf.sh to selftests. There are a couple changes from the original: 1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests 2) simplify the original ipip tests (remove iperf tests) 3) improve documentation 4) use bpf_ntoh* and bpf_hton* api In summary, 'test_tunnel_kern.o' contains the following bpf program: GRE: gre_set_tunnel, gre_get_tunnel IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel ERSPAN: erspan_set_tunnel, erspan_get_tunnel IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel VXLAN: vxlan_set_tunnel, vxlan_get_tunnel IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel GENEVE: geneve_set_tunnel, geneve_get_tunnel IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel IPIP: ipip_set_tunnel, ipip_get_tunnel IP6IP: ipip6_set_tunnel, ipip6_get_tunnel, ip6ip6_set_tunnel, ip6ip6_get_tunnel XFRM: xfrm_get_state Signed-off-by: William Tu <u9012063@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-26tools, bpftool: Display license GPL compatible in prog show/listJiri Olsa
Display the license "gpl" string in bpftool prog command, like: # bpftool prog list 5: tracepoint name func tag 57cd311f2e27366b gpl loaded_at Apr 26/09:37 uid 0 xlated 16B not jited memlock 4096B # bpftool --json --pretty prog show [{ "id": 5, "type": "tracepoint", "name": "func", "tag": "57cd311f2e27366b", "gpl_compatible": true, "loaded_at": "Apr 26/09:37", "uid": 0, "bytes_xlated": 16, "jited": false, "bytes_memlock": 4096 } ] Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-26tools, bpf: Sync bpf.h uapi headerJiri Olsa
Syncing the bpf.h uapi header with tools. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-26bpf: fix uninitialized variable in bpf toolsJohn Fastabend
Here the variable cont is used as the saved_pointer for a call to strtok_r(). It is safe to use the value uninitialized in this context however and the later reference is only ever used if the strtok_r is successful. But, 'gcc-5' at least doesn't have all this knowledge so initialize cont to NULL. Additionally, do the natural NULL check before accessing just for completness. The warning is the following: ./bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’: ./bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized] } else if (matches(subcmd, "pcap") == 0) { Fixes: fd981e3c321a "filter: bpf_dbg: add minimal bpf debugger" Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-26selftests: udp gso benchmarkWillem de Bruijn
Send udp data between a source and sink, optionally with udp gso. The two processes are expected to be run on separate hosts. A script is included that runs them together over loopback in a single namespace for functionality testing. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26selftests: udp gso with corkingWillem de Bruijn
Corked sockets take a different path to construct a udp datagram than the lockless fast path. Test this alternate path. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26selftests: udp gso with connected socketsWillem de Bruijn
Connected sockets use path mtu instead of device mtu. Test this path by inserting a route mtu that is lower than the device mtu. Verify that the path mtu for the connection matches this lower number, then run the same test as in the connectionless case. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26selftests: udp gsoWillem de Bruijn
Validate udp gso, including edge cases (such as min/max gso sizes). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-26Merge tag 'perf-urgent-for-mingo-4.17-20180425' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf stat: - Keep the '/' event modifier separator in fallback, for example when fallbacking from 'cpu/cpu-cycles/' to user level only, where it should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri Olsa) - Fix PMU events parsing rule, improving error reporting for invalid events (Jiri Olsa) - Disable write_backward and other event attributes for !group events in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S' that has leader sampling (:S) and where just the 'cycles', the leader event, should have the write_backward attribute set, in this case it all fails because the PMU where 'msr/aperf/' lives doesn't accepts write_backward style sampling (Jiri Olsa) - Only fall back group read for leader (Kan Liang) - Fix core PMU alias list for x86 platform (Kan Liang) - Print out hint for mixed PMU group error (Kan Liang) - Fix duplicate PMU name for interval print (Kan Liang) Core: - Set main kernel end address properly when reading kernel and module maps (Namhyung Kim) perf mem: - Fix incorrect entries and add missing man options (Sangwon Hong) s/390: - Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter) - Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390 - Fix s390 undefined record__auxtrace_init() return value in 'perf record' (Thomas Richter) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merging net into net-next to help the bpf folks avoid some really ugly merge conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-04-25 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix to clear the percpu metadata_dst that could otherwise carry stale ip_tunnel_info, from William. 2) Fix that reduces the number of passes in x64 JIT with regards to dead code sanitation to avoid risk of prog rejection, from Gianluca. 3) Several fixes of sockmap programs, besides others, fixing a double page_put() in error path, missing refcount hold for pinned sockmap, adding required -target bpf for clang in sample Makefile, from John. 4) Fix to disable preemption in __BPF_PROG_RUN_ARRAY() paths, from Roman. 5) Fix tools/bpf/ Makefile with regards to a lex/yacc build error seen on older gcc-5, from John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-25bpf: fix for lex/yacc build error with gcc-5John Fastabend
Fix build error found with Ubuntu shipped gcc-5 ~/git/bpf/tools/bpf$ make all Auto-detecting system features: ... libbfd: [ OFF ] ... disassembler-four-args: [ OFF ] CC bpf_jit_disasm.o LINK bpf_jit_disasm CC bpf_dbg.o /home/john/git/bpf/tools/bpf/bpf_dbg.c: In function ‘cmd_load’: /home/john/git/bpf/tools/bpf/bpf_dbg.c:1077:13: warning: ‘cont’ may be used uninitialized in this function [-Wmaybe-uninitialized] } else if (matches(subcmd, "pcap") == 0) { ^ LINK bpf_dbg CC bpf_asm.o make: *** No rule to make target `bpf_exp.yacc.o', needed by `bpf_asm'. Stop. Fixes: 5a8997f20715 ("tools: bpf: respect output directory during build") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-25selftests:firmware: fixes a call to a wrong function nameJeffrin Jose T
This is a patch to the tools/testing/selftests/firmware/fw_run_tests.sh file which fixes a bug which calls to a wrong function name,which in turn blocks the execution of certain tests. Signed-off-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-25selftests: ftrace: Add a testcase for multiple actions on triggerMasami Hiramatsu
Add a testcase for multiple actions with different parameters on an event trigger, which has been fixed by commit 192c283e93bd ("tracing: Add action comparisons when testing matching hist triggers"). Link: http://lkml.kernel.org/r/152292055227.15769.6327959816123227152.stgit@devbox Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-04-25selftests: ftrace: Fix trigger extended error testcaseMasami Hiramatsu
Previous testcase redirects echo-out into /dev/null using "&>" as below echo "trigger-command" >> trigger &> /dev/null But this means redirecting both stdout and stderr into /dev/null because it is same as below echo "trigger-command" >> trigger > /dev/null 2>&1 So ">> trigger" redirects stdout to trigger file, but next "> /dev/null" redirects stdout to /dev/null again and the last "2>/&1" redirects stderr to stdout (/dev/null) This fixes it by "2> /dev/null". And also, since it must fail, add "!" to echo command. Link: http://lkml.kernel.org/r/152292052250.15769.12565292689264162435.stgit@devbox Fixes: f06eec4d0f2c ("selftests: ftrace: Add inter-event hist triggers testcases") Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
generated by cgit (git 2.34.1) at 2025-07-15 23:44:02 +0000