summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-12-26selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGEMaxim Galaganov
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and IP_LOCAL_PORT_RANGE sockopts. Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range selftest to provide selftest coverage for these sockopts. Acked-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Maxim Galaganov <max@internet.ru> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests: forwarding: ethtool_mm: fall back to aggregate if device does not ↵Vladimir Oltean
report pMAC stats Some devices do not support individual 'pmac' and 'emac' stats. For such devices, resort to 'aggregate' stats. Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Roger Quadros <rogerq@kernel.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests: forwarding: ethtool_mm: support devices with higher rx-min-frag-sizeVladimir Oltean
Some devices have errata due to which they cannot report ETH_ZLEN (60) in the rx-min-frag-size. This was foreseen of course, and lldpad has logic that when we request it to advertise addFragSize 0, it will round it up to the lowest value that is _actually_ supported by the hardware. The problem is that the selftest expects lldpad to report back to us the same value as we requested. Make the selftest smarter by figuring out on its own what is a reasonable value to expect. Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Roger Quadros <rogerq@kernel.org> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23kselftest/runner.sh: add netns supportHangbin Liu
Add a variable RUN_IN_NETNS if the user wants to run all the selected tests in namespace in parallel. With this, we can save a lot of testing time. Note that some tests may not fit to run in namespace, e.g. net/drop_monitor_tests.sh, as the dwdump needs to be run in init ns. I also added another parameter -p to make all the logs reported separately instead of mixing them in the stdout or output.log. Nit: the NUM in run_one is not used, rename it to test_num. Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert pmtu.sh to run it in unique namespaceHangbin Liu
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh Here is the test result after conversion. # ./pmtu.sh TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] TEST: ipv6: PMTU exceptions [ OK ] TEST: ipv6: PMTU exceptions - nexthop objects [ OK ] ... TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv6: list and flush cached exceptions [ OK ] TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv4: PMTU exception w/route replace [ OK ] TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ] TEST: ipv6: PMTU exception w/route replace [ OK ] TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: use unique netns name for setup_loopback.sh setup_veth.shHangbin Liu
The setup_loopback and setup_veth use their own way to create namespace. So let's just re-define server_ns/client_ns to unique name. At the same time update the namespace name in gro.sh and toeplitz.sh. As I don't have env to run toeplitz.sh. Here is only the gro test result. # ./gro.sh running test ipv4 data Expected {200 }, Total 1 packets Received {200 }, Total 1 packets. ... Gro::large test passed. All Tests Succeeded! Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert xfrm_policy.sh to run it in unique namespaceHangbin Liu
Here is the test result after conversion. # ./xfrm_policy.sh PASS: policy before exception matches PASS: ping to .254 bypassed ipsec tunnel (exceptions) PASS: direct policy matches (exceptions) PASS: policy matches (exceptions) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies) PASS: direct policy matches (exceptions and block policies) PASS: policy matches (exceptions and block policies) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hresh changes) PASS: direct policy matches (exceptions and block policies after hresh changes) PASS: policy matches (exceptions and block policies after hresh changes) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after hthresh change in ns3) PASS: direct policy matches (exceptions and block policies after hthresh change in ns3) PASS: policy matches (exceptions and block policies after hthresh change in ns3) PASS: ping to .254 bypassed ipsec tunnel (exceptions and block policies after htresh change to normal) PASS: direct policy matches (exceptions and block policies after htresh change to normal) PASS: policy matches (exceptions and block policies after htresh change to normal) PASS: policies with repeated htresh change Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert stress_reuseport_listen.sh to run it in unique namespaceHangbin Liu
Here is the test result after conversion. # ./stress_reuseport_listen.sh listen 24000 socks took 0.47714 Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert rtnetlink.sh to run it in unique namespaceHangbin Liu
When running the test in namespace, the debugfs may not load automatically. So add a checking to make sure debugfs loaded. Here is the test result after conversion. # ./rtnetlink.sh PASS: policy routing PASS: route get ... PASS: address proto IPv4 PASS: address proto IPv6 Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert netns-name.sh to run it in unique namespaceHangbin Liu
This test will move the device to netns 1. Add a new test_ns to do this. Here is the test result after conversion. # ./netns-name.sh netns-name.sh [ OK ] Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: convert gre_gso.sh to run it in unique namespaceHangbin Liu
Here is the test result after conversion. # ./gre_gso.sh TEST: GREv6/v4 - copy file w/ TSO [ OK ] TEST: GREv6/v4 - copy file w/ GSO [ OK ] TEST: GREv6/v6 - copy file w/ TSO [ OK ] TEST: GREv6/v6 - copy file w/ GSO [ OK ] Tests passed: 4 Tests failed: 0 Acked-by: David Ahern <dsahern@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-23selftests/net: remove unneeded semicolonJiapeng Chong
No functional modification involved. ./tools/testing/selftests/net/tcp_ao/setsockopt-closed.c:121:2-3: Unneeded semicolon. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7771 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22selftest/tcp-ao: Rectify out-of-tree buildDmitry Safonov
Trivial fix for out-of-tree build that I wasn't testing previously: 1. Create a directory for library object files, fixes: > gcc lib/kconfig.c -Wall -O2 -g -D_GNU_SOURCE -fno-strict-aliasing -I ../../../../../usr/include/ -iquote /tmp/kselftest/kselftest/net/tcp_ao/lib -I ../../../../include/ -o /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o -c > Assembler messages: > Fatal error: can't create /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o: No such file or directory > make[1]: *** [Makefile:46: /tmp/kselftest/kselftest/net/tcp_ao/lib/kconfig.o] Error 1 2. Include $(KHDR_INCLUDES) that's exported by selftests/Makefile, fixes: > In file included from lib/kconfig.c:6: > lib/aolib.h:320:45: warning: ‘struct tcp_ao_add’ declared inside parameter list will not be visible outside of this definition or declaration > 320 | extern int test_prepare_key_sockaddr(struct tcp_ao_add *ao, const char *alg, > | ^~~~~~~~~~ ... 3. While at here, clean-up $(KSFT_KHDR_INSTALL): it's not needed anymore since commit f2745dc0ba3d ("selftests: stop using KSFT_KHDR_INSTALL") 4. Also, while at here, drop .DEFAULT_GOAL definition: that has a self-explaining comment, that was valid when I made these selftests compile on local v4.19 kernel, but not needed since commit 8ce72dc32578 ("selftests: fix headers_install circular dependency") Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312190645.q76MmHyq-lkp@intel.com/ Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-22selftests/net: Fix various spelling mistakes in TCP-AO testsColin Ian King
There are a handful of spelling mistakes in test messages in the TCP-AIO selftests. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21Merge tag 'net-6.7-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and bpf. Current release - regressions: - bpf: syzkaller found null ptr deref in unix_bpf proto add - eth: i40e: fix ST code value for clause 45 Previous releases - regressions: - core: return error from sk_stream_wait_connect() if sk_wait_event() fails - ipv6: revert remove expired routes with a separated list of routes - wifi rfkill: - set GPIO direction - fix crash with WED rx support enabled - bluetooth: - fix deadlock in vhci_send_frame - fix use-after-free in bt_sock_recvmsg - eth: mlx5e: fix a race in command alloc flow - eth: ice: fix PF with enabled XDP going no-carrier after reset - eth: bnxt_en: do not map packet buffers twice Previous releases - always broken: - core: - check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() - check dev->gso_max_size in gso_features_check() - mptcp: fix inconsistent state on fastopen race - phy: skip LED triggers on PHYs on SFP modules - eth: mlx5e: - fix double free of encap_header - fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list()" * tag 'net-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: check dev->gso_max_size in gso_features_check() kselftest: rtnetlink.sh: use grep_fail when expecting the cmd fail net/ipv6: Revert remove expired routes with a separated list of routes net: avoid build bug in skb extension length calculation net: ethernet: mtk_wed: fix possible NULL pointer dereference in mtk_wed_wo_queue_tx_clean() net: stmmac: fix incorrect flag check in timestamp interrupt selftests: add vlan hw filter tests net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() net: hns3: add new maintainer for the HNS3 ethernet driver net: mana: select PAGE_POOL net: ks8851: Fix TX stall caused by TX buffer overrun ice: Fix PF with enabled XDP going no-carrier after reset ice: alter feature support check for SRIOV and LAG ice: stop trashing VF VSI aggregator node ID information mailmap: add entries for Geliang Tang mptcp: fill in missing MODULE_DESCRIPTION() mptcp: fix inconsistent state on fastopen race selftests: mptcp: join: fix subflow_send_ack lookup net: phy: skip LED triggers on PHYs on SFP modules bpf: Add missing BPF_LINK_TYPE invocations ...
2023-12-21Merge tag 'for-netdev' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-12-21 Hi David, hi Jakub, hi Paolo, hi Eric, The following pull-request contains BPF updates for your *net* tree. We've added 3 non-merge commits during the last 5 day(s) which contain a total of 4 files changed, 45 insertions(+). The main changes are: 1) Fix a syzkaller splat which triggered an oob issue in bpf_link_show_fdinfo(), from Jiri Olsa. 2) Fix another syzkaller-found issue which triggered a NULL pointer dereference in BPF sockmap for unconnected unix sockets, from John Fastabend. bpf-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Add missing BPF_LINK_TYPE invocations bpf: sockmap, test for unconnected af_unix sock bpf: syzkaller found null ptr deref in unix_bpf proto add ==================== Link: https://lore.kernel.org/r/20231221104844.1374-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-21kselftest: rtnetlink.sh: use grep_fail when expecting the cmd failHangbin Liu
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret will be set to 1, and the total test return 1 when exiting. This would cause the result report to fail if run via run_kselftest.sh. Before fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 1 After fix: # ./rtnetlink.sh -t kci_test_addrlft PASS: preferred_lft addresses have expired # echo $? 0 Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-20selftests: vxlan_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the VXLAN driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20selftests: bridge_mdb: Add MDB bulk deletion testIdo Schimmel
Add test cases to verify the behavior of the MDB bulk deletion functionality in the bridge driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-19Revert BPF token-related functionalityAndrii Nakryiko
This patch includes the following revert (one conflicting BPF FS patch and three token patch sets, represented by merge commits): - revert 0f5d5454c723 "Merge branch 'bpf-fs-mount-options-parsing-follow-ups'"; - revert 750e785796bb "bpf: Support uid and gid when mounting bpffs"; - revert 733763285acf "Merge branch 'bpf-token-support-in-libbpf-s-bpf-object'"; - revert c35919dcce28 "Merge branch 'bpf-token-and-bpf-fs-based-delegation'". Link: https://lore.kernel.org/bpf/CAHk-=wg7JuFYwGy=GOMbRCtOL+jwSQsdUaBsRWkDVYbxipbM5A@mail.gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2023-12-19selftests: add vlan hw filter testsLiu Jian
Add one basic vlan hw filter test. Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-18Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-12-18 This PR is larger than usual and contains changes in various parts of the kernel. The main changes are: 1) Fix kCFI bugs in BPF, from Peter Zijlstra. End result: all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y. 2) Introduce BPF token object, from Andrii Nakryiko. It adds an ability to delegate a subset of BPF features from privileged daemon (e.g., systemd) through special mount options for userns-bound BPF FS to a trusted unprivileged application. The design accommodates suggestions from Christian Brauner and Paul Moore. Example: $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp 3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei. - Complete precision tracking support for register spills - Fix verification of possibly-zero-sized stack accesses - Fix access to uninit stack slots - Track aligned STACK_ZERO cases as imprecise spilled registers. It improves the verifier "instructions processed" metric from single digit to 50-60% for some programs. - Fix verifier retval logic 4) Support for VLAN tag in XDP hints, from Larysa Zaremba. 5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu. End result: better memory utilization and lower I$ miss for calls to BPF via BPF trampoline. 6) Fix race between BPF prog accessing inner map and parallel delete, from Hou Tao. 7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu. It allows BPF interact with IPSEC infra. The intent is to support software RSS (via XDP) for the upcoming ipsec pcpu work. Experiments on AWS demonstrate single tunnel pcpu ipsec reaching line rate on 100G ENA nics. 8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao. 9) BPF file verification via fsverity, from Song Liu. It allows BPF progs get fsverity digest. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits) bpf: Ensure precise is reset to false in __mark_reg_const_zero() selftests/bpf: Add more uprobe multi fail tests bpf: Fail uprobe multi link with negative offset selftests/bpf: Test the release of map btf s390/bpf: Fix indirect trampoline generation selftests/bpf: Temporarily disable dummy_struct_ops test on s390 x86/cfi,bpf: Fix bpf_exception_cb() signature bpf: Fix dtor CFI cfi: Add CFI_NOSEAL() x86/cfi,bpf: Fix bpf_struct_ops CFI x86/cfi,bpf: Fix bpf_callback_t CFI x86/cfi,bpf: Fix BPF JIT call cfi: Flip headers selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment bpf: Limit the number of kprobes when attaching program to multiple kprobes bpf: Limit the number of uprobes when attaching program to multiple uprobes bpf: xdp: Register generic_kfunc_set with XDP programs selftests/bpf: utilize string values for delegate_xxx mount options ... ==================== Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18bpf: Ensure precise is reset to false in __mark_reg_const_zero()Andrii Nakryiko
It is safe to always start with imprecise SCALAR_VALUE register. Previously __mark_reg_const_zero() relied on caller to reset precise mark, but it's very error prone and we already missed it in a few places. So instead make __mark_reg_const_zero() reset precision always, as it's a safe default for SCALAR_VALUE. Explanation is basically the same as for why we are resetting (or rather not setting) precision in current state. If necessary, precision propagation will set it to precise correctly. As such, also remove a big comment about forward precision propagation in mark_reg_stack_read() and avoid unnecessarily setting precision to true after reading from STACK_ZERO stack. Again, precision propagation will correctly handle this, if that SCALAR_VALUE register will ever be needed to be precise. Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Maxim Mikityanskiy <maxtram95@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231218173601.53047-1-andrii@kernel.org
2023-12-18tools/net/ynl-gen-rst: Remove extra indentation from generated docsDonald Hunter
The output from ynl-gen-rst.py has extra indentation that causes extra <blockquote> elements to be generated in the HTML output. Reduce the indentation so that sphinx doesn't generate unnecessary <blockquote> elements. Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-14-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Remove bold from attribute-set headingsDonald Hunter
The generated .rst for attribute-sets currently uses a sub-sub-heading for each attribute, with the attribute name in bold. This makes attributes stand out more than the attribute-set sub-headings they are part of. Remove the bold markup from attribute sub-sub-headings. Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-13-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Sort the index of generated netlink specsDonald Hunter
The index of netlink specs was being generated unsorted. Sort the output before generating the index entries. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-12-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl-gen-rst: Add sub-messages to generated docsDonald Hunter
Add a section for sub-messages to the generated .rst files. Reviewed-by: Breno Leitao <leitao@debian.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-11-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl: Add binary and pad support to structs for tcDonald Hunter
The tc netlink-raw family needs binary and pad types for several qopt C structs. Add support for them to ynl. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-6-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl: Add 'sub-message' attribute decoding to ynlDonald Hunter
Implement the 'sub-message' attribute type in ynl. Encode support is not yet implemented. Support for sub-message selectors at a different nest level from the key attribute is not yet supported. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-5-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18tools/net/ynl: Use consistent array index expression formattingDonald Hunter
Use expression formatting that conforms to the python style guide. Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20231215093720.18774-2-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-18selftests/bpf: Add more uprobe multi fail testsJiri Olsa
We fail to create uprobe if we pass negative offset. Add more tests validating kernel-side error checking code. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/bpf/20231217215538.3361991-3-jolsa@kernel.org
2023-12-18selftests/bpf: Test the release of map btfHou Tao
When there is bpf_list_head or bpf_rb_root field in map value, the free of map btf and the free of map value may run concurrently and there may be use-after-free problem, so add two test cases to demonstrate it. And the use-after-free problem can been easily reproduced by using bpf_next tree and a KASAN-enabled kernel. The first test case tests the racing between the free of map btf and the free of array map. It constructs the racing by releasing the array map in the end after other ref-counter of map btf has been released. To delay the free of array map and make it be invoked after btf_free_rcu() is invoked, it stresses system_unbound_wq by closing multiple percpu array maps before it closes the array map. The second case tests the racing between the free of map btf and the free of inner map. Beside using the similar method as the first one does, it uses bpf_map_delete_elem() to delete the inner map and to defer the release of inner map after one RCU grace period. The reason for using two skeletons is to prevent the release of outer map and inner map in map_in_map_btf.c interfering the release of bpf map in normal_map_btf.c. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20231216035510.4030605-1-houtao@huaweicloud.com
2023-12-18s390/bpf: Fix indirect trampoline generationAlexei Starovoitov
The func_addr used to be NULL for indirect trampolines used by struct_ops. Now func_addr is a valid function pointer. Hence use BPF_TRAMP_F_INDIRECT flag to detect such condition. Fixes: 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Link: https://lore.kernel.org/bpf/20231216004549.78355-1-alexei.starovoitov@gmail.com
2023-12-17selftests: mptcp: join: fix subflow_send_ack lookupGeliang Tang
MPC backups tests will skip unexpected sometimes (For example, when compiling kernel with an older version of gcc, such as gcc-8), since static functions like mptcp_subflow_send_ack also be listed in /proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global function): > grep "mptcp_subflow_send_ack" /proc/kallsyms 0000000000000000 T __pfx___mptcp_subflow_send_ack 0000000000000000 T __mptcp_subflow_send_ack 0000000000000000 t __pfx_mptcp_subflow_send_ack 0000000000000000 t mptcp_subflow_send_ack In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$" will be false, MPC backups tests will skip. This is not what we expected. The correct logic here should be: if mptcp_subflow_send_ack is not a global function in /proc/kallsyms, do these MPC backups tests. So a 'T' must be added in front of mptcp_subflow_send_ack. Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17Merge tag 'cxl-fixes-6.7-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL (Compute Express Link) fixes from Dan Williams: "A collection of CXL fixes. The touch outside of drivers/cxl/ is for a helper that allocates physical address space. Device hotplug tests showed that the driver failed to utilize (skipped over) valid capacity when allocating a new memory region. Outside of that, new tests uncovered a small crop of lockdep reports. There is also some miscellaneous error path and leak fixups that are not urgent, but useful to cleanup now. - Fix alloc_free_mem_region()'s scan for address space, prevent false negative out-of-space events - Fix sleeping lock acquisition from CXL trace event (atomic context) - Fix put_device() like for the new CXL PMU driver - Fix wrong pointer freed on error path - Fixup several lockdep reports (missing lock hold) from new assertion in cxl_num_decoders_committed() and new tests" * tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: cxl/pmu: Ensure put_device on pmu devices cxl/cdat: Free correct buffer on checksum error cxl/hdm: Fix dpa translation locking kernel/resource: Increment by align value in get_free_mem_region() cxl: Add cxl_num_decoders_committed() usage to cxl_test cxl/memdev: Hold region_rwsem during inject and clear poison ops cxl/core: Always hold region_rwsem while reading poison lists cxl/hdm: Fix a benign lockdep splat
2023-12-17selftests/net: Add TCP-AO key-management testDmitry Safonov
Check multiple keys on a socket: - rotation on closed socket - current/rnext operations shouldn't be possible on listen sockets - current/rnext key set should be the one, that's used on connect() - key rotations with pseudo-random generated keys - copying matching keys on connect() and on accept() At this moment there are 3 tests that are "expected" to fail: a kernel fix is needed to improve the situation, they are marked XFAIL. Sample output: > # ./key-management_ipv4 > 1..120 > # 1601[lib/setup.c:239] rand seed 1700526653 > TAP version 13 > ok 1 closed socket, delete a key: the key was deleted > ok 2 closed socket, delete all keys: the key was deleted > ok 3 closed socket, delete current key: key deletion was prevented > ok 4 closed socket, delete rnext key: key deletion was prevented > ok 5 closed socket, delete a key + set current/rnext: the key was deleted > ok 6 closed socket, force-delete current key: the key was deleted > ok 7 closed socket, force-delete rnext key: the key was deleted > ok 8 closed socket, delete current+rnext key: key deletion was prevented > ok 9 closed socket, add + change current key > ok 10 closed socket, add + change rnext key > ok 11 listen socket, delete a key: the key was deleted > ok 12 listen socket, delete all keys: the key was deleted > ok 13 listen socket, setting current key not allowed > ok 14 listen socket, setting rnext key not allowed > ok 15 # XFAIL listen() after current/rnext keys set: the socket has current/rnext keys: 100:200 > ok 16 # XFAIL listen socket, delete current key from before listen(): failed to delete the key 100:100 -16 > ok 17 # XFAIL listen socket, delete rnext key from before listen(): failed to delete the key 200:200 -16 > ok 18 listen socket, getsockopt(TCP_AO_REPAIR) is restricted > ok 19 listen socket, setsockopt(TCP_AO_REPAIR) is restricted > ok 20 listen socket, delete a key + set current/rnext: key deletion was prevented > ok 21 listen socket, force-delete current key: key deletion was prevented > ok 22 listen socket, force-delete rnext key: key deletion was prevented > ok 23 listen socket, delete a key: the key was deleted > ok 24 listen socket, add + change current key > ok 25 listen socket, add + change rnext key > ok 26 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 27 client: Check current/rnext keys unset before connect(): current key 19 as expected > ok 28 client: Check current/rnext keys unset before connect(): rnext key 146 as expected > ok 29 server: Check current/rnext keys unset before connect(): server alive > ok 30 server: Check current/rnext keys unset before connect(): passed counters checks > ok 31 client: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 32 server: Check current/rnext keys unset before connect(): The socket keys are consistent with the expectations > ok 33 server: Check current/rnext keys unset before connect(): passed counters checks > ok 34 client: Check current/rnext keys unset before connect(): passed counters checks > ok 35 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 36 server: Check current/rnext keys set before connect(): server alive > ok 37 server: Check current/rnext keys set before connect(): passed counters checks > ok 38 client: Check current/rnext keys set before connect(): current key 10 as expected > ok 39 client: Check current/rnext keys set before connect(): rnext key 137 as expected > ok 40 server: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 41 client: Check current/rnext keys set before connect(): The socket keys are consistent with the expectations > ok 42 client: Check current/rnext keys set before connect(): passed counters checks > ok 43 server: Check current/rnext keys set before connect(): passed counters checks > ok 44 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 45 server: Check current != rnext keys set before connect(): server alive > ok 46 server: Check current != rnext keys set before connect(): passed counters checks > ok 47 client: Check current != rnext keys set before connect(): current key 10 as expected > ok 48 client: Check current != rnext keys set before connect(): rnext key 132 as expected > ok 49 server: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 50 client: Check current != rnext keys set before connect(): The socket keys are consistent with the expectations > ok 51 client: Check current != rnext keys set before connect(): passed counters checks > ok 52 server: Check current != rnext keys set before connect(): passed counters checks > ok 53 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 54 server: Check current flapping back on peer's RnextKey request: server alive > ok 55 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 56 client: Check current flapping back on peer's RnextKey request: current key 10 as expected > ok 57 client: Check current flapping back on peer's RnextKey request: rnext key 132 as expected > ok 58 server: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 59 client: Check current flapping back on peer's RnextKey request: The socket keys are consistent with the expectations > ok 60 server: Check current flapping back on peer's RnextKey request: passed counters checks > ok 61 client: Check current flapping back on peer's RnextKey request: passed counters checks > ok 62 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 63 server: Rotate over all different keys: server alive > ok 64 server: Rotate over all different keys: passed counters checks > ok 65 server: Rotate over all different keys: current key 128 as expected > ok 66 client: Rotate over all different keys: rnext key 128 as expected > ok 67 server: Rotate over all different keys: current key 129 as expected > ok 68 client: Rotate over all different keys: rnext key 129 as expected > ok 69 server: Rotate over all different keys: current key 130 as expected > ok 70 client: Rotate over all different keys: rnext key 130 as expected > ok 71 server: Rotate over all different keys: current key 131 as expected > ok 72 client: Rotate over all different keys: rnext key 131 as expected > ok 73 server: Rotate over all different keys: current key 132 as expected > ok 74 client: Rotate over all different keys: rnext key 132 as expected > ok 75 server: Rotate over all different keys: current key 133 as expected > ok 76 client: Rotate over all different keys: rnext key 133 as expected > ok 77 server: Rotate over all different keys: current key 134 as expected > ok 78 client: Rotate over all different keys: rnext key 134 as expected > ok 79 server: Rotate over all different keys: current key 135 as expected > ok 80 client: Rotate over all different keys: rnext key 135 as expected > ok 81 server: Rotate over all different keys: current key 136 as expected > ok 82 client: Rotate over all different keys: rnext key 136 as expected > ok 83 server: Rotate over all different keys: current key 137 as expected > ok 84 client: Rotate over all different keys: rnext key 137 as expected > ok 85 server: Rotate over all different keys: current key 138 as expected > ok 86 client: Rotate over all different keys: rnext key 138 as expected > ok 87 server: Rotate over all different keys: current key 139 as expected > ok 88 client: Rotate over all different keys: rnext key 139 as expected > ok 89 server: Rotate over all different keys: current key 140 as expected > ok 90 client: Rotate over all different keys: rnext key 140 as expected > ok 91 server: Rotate over all different keys: current key 141 as expected > ok 92 client: Rotate over all different keys: rnext key 141 as expected > ok 93 server: Rotate over all different keys: current key 142 as expected > ok 94 client: Rotate over all different keys: rnext key 142 as expected > ok 95 server: Rotate over all different keys: current key 143 as expected > ok 96 client: Rotate over all different keys: rnext key 143 as expected > ok 97 server: Rotate over all different keys: current key 144 as expected > ok 98 client: Rotate over all different keys: rnext key 144 as expected > ok 99 server: Rotate over all different keys: current key 145 as expected > ok 100 client: Rotate over all different keys: rnext key 145 as expected > ok 101 server: Rotate over all different keys: current key 146 as expected > ok 102 client: Rotate over all different keys: rnext key 146 as expected > ok 103 server: Rotate over all different keys: current key 127 as expected > ok 104 client: Rotate over all different keys: rnext key 127 as expected > ok 105 client: Rotate over all different keys: current key 0 as expected > ok 106 client: Rotate over all different keys: rnext key 127 as expected > ok 107 server: Rotate over all different keys: The socket keys are consistent with the expectations > ok 108 client: Rotate over all different keys: The socket keys are consistent with the expectations > ok 109 client: Rotate over all different keys: passed counters checks > ok 110 server: Rotate over all different keys: passed counters checks > ok 111 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 112 Can't add a key with non-matching ip-address for established sk > ok 113 Can't add a key with non-matching VRF for established sk > ok 114 server: Check accept() => established key matching: server alive > ok 115 server: Check accept() => established key matching: passed counters checks > ok 116 client: Check connect() => established key matching: current key 0 as expected > ok 117 client: Check connect() => established key matching: rnext key 128 as expected > ok 118 client: Check connect() => established key matching: The socket keys are consistent with the expectations > ok 119 server: Check accept() => established key matching: The socket keys are consistent with the expectations > ok 120 server: Check accept() => established key matching: passed counters checks > # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO selfconnect/simultaneous connect testDmitry Safonov
Check that a rare functionality of TCP named self-connect works with TCP-AO. This "under the cover" also checks TCP simultaneous connect (TCP_SYN_RECV socket state), which would be harder to check other ways. In order to verify that it's indeed TCP simultaneous connect, check the counters TCPChallengeACK and TCPSYNChallenge. Sample of the output: > # ./self-connect_ipv6 > 1..4 > # 1738[lib/setup.c:254] rand seed 1696451931 > TAP version 13 > ok 1 self-connect(same keyids): connect TCPAOGood 0 => 24 > ok 2 self-connect(different keyids): connect TCPAOGood 26 => 50 > ok 3 self-connect(restore): connect TCPAOGood 52 => 97 > ok 4 self-connect(restore, different keyids): connect TCPAOGood 99 => 144 > # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO RST testDmitry Safonov
Check that both active and passive reset works and correctly sign segments with TCP-AO or don't send RSTs if not possible to sign. A listening socket with backlog = 0 gets one connection in accept queue, another in syn queue. Once the server/listener socket is forcibly closed, client sockets aren't connected to anything. In regular situation they would receive RST on any segment, but with TCP-AO as there's no listener, no AO-key and unknown ISNs, no RST should be sent. And "passive" reset, where RST is sent on reply for some segment (tcp_v{4,6}_send_reset()) - there use TCP_REPAIR to corrupt SEQ numbers, which later results in TCP-AO signed RST, which will be verified and client socket will get EPIPE. No TCPAORequired/TCPAOBad segments are expected during these tests. Sample of the output: > # ./rst_ipv4 > 1..15 > # 1462[lib/setup.c:254] rand seed 1686611171 > TAP version 13 > ok 1 servered 1000 bytes > ok 2 Verified established tcp connection > ok 3 sk[0] = 7, connection was reset > ok 4 sk[1] = 8, connection was reset > ok 5 sk[2] = 9 > ok 6 MKT counters are good on server > ok 7 Verified established tcp connection > ok 8 client connection broken post-seq-adjust > ok 9 client connection was reset > ok 10 No segments without AO sign (server) > ok 11 Signed AO segments (server): 0 => 30 > ok 12 No segments with bad AO sign (server) > ok 13 No segments without AO sign (client) > ok 14 Signed AO segments (client): 0 => 30 > ok 15 No segments with bad AO sign (client) > # Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add SEQ number extension testDmitry Safonov
Check that on SEQ number wraparound there is no disruption or TCPAOBad segments produced. Sample of expected output: > # ./seq-ext_ipv4 > 1..7 > # 1436[lib/setup.c:254] rand seed 1686611079 > TAP version 13 > ok 1 server alive > ok 2 post-migrate connection alive > ok 3 TCPAOGood counter increased 1002 => 3002 > ok 4 TCPAOGood counter increased 1003 => 3003 > ok 5 TCPAOBad counter didn't increase > ok 6 TCPAOBad counter didn't increase > ok 7 SEQ extension incremented: 1/1999, 1/998999 > # Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP_REPAIR TCP-AO testsDmitry Safonov
The test plan is: 1. check that TCP-AO connection may be restored on another socket 2. check restore with wrong send/recv ISN (checking that they are part of MAC generation) 3. check restore with wrong SEQ number extension (checking that high bytes of it taken into MAC generation) Sample output expected: > # ./restore_ipv4 > 1..20 > # 1412[lib/setup.c:254] rand seed 1686610825 > TAP version 13 > ok 1 TCP-AO migrate to another socket: server alive > ok 2 TCP-AO migrate to another socket: post-migrate connection is alive > ok 3 TCP-AO migrate to another socket: counter TCPAOGood increased 23 => 44 > ok 4 TCP-AO migrate to another socket: counter TCPAOGood increased 22 => 42 > ok 5 TCP-AO with wrong send ISN: server couldn't serve > ok 6 TCP-AO with wrong send ISN: post-migrate connection is broken > ok 7 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 4 > ok 8 TCP-AO with wrong send ISN: counter TCPAOBad increased 0 => 3 > ok 9 TCP-AO with wrong receive ISN: server couldn't serve > ok 10 TCP-AO with wrong receive ISN: post-migrate connection is broken > ok 11 TCP-AO with wrong receive ISN: counter TCPAOBad increased 4 => 8 > ok 12 TCP-AO with wrong receive ISN: counter TCPAOBad increased 5 => 10 > ok 13 TCP-AO with wrong send SEQ ext number: server couldn't serve > ok 14 TCP-AO with wrong send SEQ ext number: post-migrate connection is broken > ok 15 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 9 => 10 > ok 16 TCP-AO with wrong send SEQ ext number: counter TCPAOBad increased 11 => 19 > ok 17 TCP-AO with wrong receive SEQ ext number: post-migrate connection is broken > ok 18 TCP-AO with wrong receive SEQ ext number: server couldn't serve > ok 19 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 10 => 18 > ok 20 TCP-AO with wrong receive SEQ ext number: counter TCPAOBad increased 20 => 23 > # Totals: pass:20 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add test/benchmark for removing MKTsDmitry Safonov
Sample output: > 1..36 > # 1106[lib/setup.c:207] rand seed 1660754406 > TAP version 13 > ok 1 Worst case connect 512 keys: min=0ms max=1ms mean=0.583329ms stddev=0.076376 > ok 2 Connect random-search 512 keys: min=0ms max=1ms mean=0.53412ms stddev=0.0516779 > ok 3 Worst case delete 512 keys: min=2ms max=11ms mean=6.04139ms stddev=0.245792 > ok 4 Add a new key 512 keys: min=0ms max=13ms mean=0.673415ms stddev=0.0820618 > ok 5 Remove random-search 512 keys: min=5ms max=9ms mean=6.65969ms stddev=0.258064 > ok 6 Remove async 512 keys: min=0ms max=0ms mean=0.041825ms stddev=0.0204512 > ok 7 Worst case connect 1024 keys: min=0ms max=2ms mean=0.520357ms stddev=0.0721358 > ok 8 Connect random-search 1024 keys: min=0ms max=2ms mean=0.535312ms stddev=0.0517355 > ok 9 Worst case delete 1024 keys: min=5ms max=9ms mean=8.27219ms stddev=0.287614 > ok 10 Add a new key 1024 keys: min=0ms max=1ms mean=0.688121ms stddev=0.0829531 > ok 11 Remove random-search 1024 keys: min=5ms max=9ms mean=8.37649ms stddev=0.289422 > ok 12 Remove async 1024 keys: min=0ms max=0ms mean=0.0457096ms stddev=0.0213798 > ok 13 Worst case connect 2048 keys: min=0ms max=2ms mean=0.748804ms stddev=0.0865335 > ok 14 Connect random-search 2048 keys: min=0ms max=2ms mean=0.782993ms stddev=0.0625697 > ok 15 Worst case delete 2048 keys: min=5ms max=10ms mean=8.23106ms stddev=0.286898 > ok 16 Add a new key 2048 keys: min=0ms max=1ms mean=0.812988ms stddev=0.0901658 > ok 17 Remove random-search 2048 keys: min=8ms max=9ms mean=8.84949ms stddev=0.297481 > ok 18 Remove async 2048 keys: min=0ms max=0ms mean=0.0297223ms stddev=0.0172402 > ok 19 Worst case connect 4096 keys: min=1ms max=5ms mean=1.53352ms stddev=0.123836 > ok 20 Connect random-search 4096 keys: min=1ms max=5ms mean=1.52226ms stddev=0.0872429 > ok 21 Worst case delete 4096 keys: min=5ms max=9ms mean=8.25874ms stddev=0.28738 > ok 22 Add a new key 4096 keys: min=0ms max=3ms mean=1.67382ms stddev=0.129376 > ok 23 Remove random-search 4096 keys: min=5ms max=10ms mean=8.26178ms stddev=0.287433 > ok 24 Remove async 4096 keys: min=0ms max=0ms mean=0.0340009ms stddev=0.0184393 > ok 25 Worst case connect 8192 keys: min=2ms max=4ms mean=2.86208ms stddev=0.169177 > ok 26 Connect random-search 8192 keys: min=2ms max=4ms mean=2.87592ms stddev=0.119915 > ok 27 Worst case delete 8192 keys: min=6ms max=11ms mean=7.55291ms stddev=0.274826 > ok 28 Add a new key 8192 keys: min=1ms max=5ms mean=2.56797ms stddev=0.160249 > ok 29 Remove random-search 8192 keys: min=5ms max=10ms mean=7.14002ms stddev=0.267208 > ok 30 Remove async 8192 keys: min=0ms max=0ms mean=0.0320066ms stddev=0.0178904 > ok 31 Worst case connect 16384 keys: min=5ms max=6ms mean=5.55334ms stddev=0.235655 > ok 32 Connect random-search 16384 keys: min=5ms max=6ms mean=5.52614ms stddev=0.166225 > ok 33 Worst case delete 16384 keys: min=5ms max=11ms mean=7.39109ms stddev=0.271866 > ok 34 Add a new key 16384 keys: min=2ms max=4ms mean=3.35799ms stddev=0.183248 > ok 35 Remove random-search 16384 keys: min=5ms max=8ms mean=6.86078ms stddev=0.261931 > ok 36 Remove async 16384 keys: min=0ms max=0ms mean=0.0302384ms stddev=0.0173892 > # Totals: pass:36 fail:0 xfail:0 xpass:0 skip:0 error:0 >From the output it's visible that the current simplified approach with linked-list of MKTs scales quite fine even for thousands of keys. And that also means that the majority of the time for delete is eaten by synchronize_rcu() [which I can confirm separately by tracing]. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket testsDmitry Safonov
The test plan was (most of tests have all 3 client types): 1. TCP-AO listen (INADDR_ANY) 2. TCP-MD5 listen (INADDR_ANY) 3. non-signed listen (INADDR_ANY) 4. TCP-AO + TCP-MD5 listen (prefix) 5. TCP-AO subprefix add failure [checked in setsockopt-closed.c] 6. TCP-AO out of prefix connect [checked in connect-deny.c] 7. TCP-AO + TCP-MD5 on connect() 8. TCP-AO intersect with TCP-MD5 failure 9. Established TCP-AO: add TCP-MD5 key 10. Established TCP-MD5: add TCP-AO key 11. Established non-signed: add TCP-AO key Output produced: > # ./unsigned-md5_ipv6 > 1..72 > # 1592[lib/setup.c:239] rand seed 1697567046 > TAP version 13 > ok 1 AO server (INADDR_ANY): AO client: counter TCPAOGood increased 0 => 2 > ok 2 AO server (INADDR_ANY): AO client: connected > ok 3 AO server (INADDR_ANY): MD5 client > ok 4 AO server (INADDR_ANY): MD5 client: counter TCPMD5Unexpected increased 0 => 1 > ok 5 AO server (INADDR_ANY): no sign client: counter TCPAORequired increased 0 => 1 > ok 6 AO server (INADDR_ANY): unsigned client > ok 7 AO server (AO_REQUIRED): AO client: connected > ok 8 AO server (AO_REQUIRED): AO client: counter TCPAOGood increased 4 => 6 > ok 9 AO server (AO_REQUIRED): unsigned client > ok 10 AO server (AO_REQUIRED): unsigned client: counter TCPAORequired increased 1 => 2 > ok 11 MD5 server (INADDR_ANY): AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 12 MD5 server (INADDR_ANY): AO client > ok 13 MD5 server (INADDR_ANY): MD5 client: connected > ok 14 MD5 server (INADDR_ANY): MD5 client: no counter checks > ok 15 MD5 server (INADDR_ANY): no sign client > ok 16 MD5 server (INADDR_ANY): no sign client: counter TCPMD5NotFound increased 0 => 1 > ok 17 no sign server: AO client > ok 18 no sign server: AO client: counter TCPAOKeyNotFound increased 1 => 2 > ok 19 no sign server: MD5 client > ok 20 no sign server: MD5 client: counter TCPMD5Unexpected increased 1 => 2 > ok 21 no sign server: no sign client: connected > ok 22 no sign server: no sign client: counter CurrEstab increased 0 => 1 > ok 23 AO+MD5 server: AO client (matching): connected > ok 24 AO+MD5 server: AO client (matching): counter TCPAOGood increased 8 => 10 > ok 25 AO+MD5 server: AO client (misconfig, matching MD5) > ok 26 AO+MD5 server: AO client (misconfig, matching MD5): counter TCPAOKeyNotFound increased 2 => 3 > ok 27 AO+MD5 server: AO client (misconfig, non-matching): counter TCPAOKeyNotFound increased 3 => 4 > ok 28 AO+MD5 server: AO client (misconfig, non-matching) > ok 29 AO+MD5 server: MD5 client (matching): connected > ok 30 AO+MD5 server: MD5 client (matching): no counter checks > ok 31 AO+MD5 server: MD5 client (misconfig, matching AO) > ok 32 AO+MD5 server: MD5 client (misconfig, matching AO): counter TCPMD5Unexpected increased 2 => 3 > ok 33 AO+MD5 server: MD5 client (misconfig, non-matching) > ok 34 AO+MD5 server: MD5 client (misconfig, non-matching): counter TCPMD5Unexpected increased 3 => 4 > ok 35 AO+MD5 server: no sign client (unmatched): connected > ok 36 AO+MD5 server: no sign client (unmatched): counter CurrEstab increased 0 => 1 > ok 37 AO+MD5 server: no sign client (misconfig, matching AO) > ok 38 AO+MD5 server: no sign client (misconfig, matching AO): counter TCPAORequired increased 2 => 3 > ok 39 AO+MD5 server: no sign client (misconfig, matching MD5) > ok 40 AO+MD5 server: no sign client (misconfig, matching MD5): counter TCPMD5NotFound increased 1 => 2 > ok 41 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: connect() was prevented > ok 42 AO+MD5 server: client with both [TCP-MD5] and TCP-AO keys: no counter checks > ok 43 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: connect() was prevented > ok 44 AO+MD5 server: client with both TCP-MD5 and [TCP-AO] keys: no counter checks > ok 45 TCP-AO established: add TCP-MD5 key: postfailed as expected > ok 46 TCP-AO established: add TCP-MD5 key: counter TCPAOGood increased 12 => 14 > ok 47 TCP-MD5 established: add TCP-AO key: postfailed as expected > ok 48 TCP-MD5 established: add TCP-AO key: no counter checks > ok 49 non-signed established: add TCP-AO key: postfailed as expected > ok 50 non-signed established: add TCP-AO key: counter CurrEstab increased 0 => 1 > ok 51 TCP-AO key intersects with existing TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 52 TCP-MD5 key intersects with existing TCP-AO key: prefailed as expected: Key was rejected by service > ok 53 TCP-MD5 key + TCP-AO required: prefailed as expected: Key was rejected by service > ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service > ok 55 VRF: TCP-AO key (no l3index) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 56 VRF: TCP-MD5 key (no l3index) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 57 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 58 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 59 VRF: TCP-AO key (no l3index) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 60 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (no l3index): prefailed as expected: Key was rejected by service > ok 61 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 62 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 63 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=0): prefailed as expected: Key was rejected by service > ok 64 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=0): prefailed as expected: Key was rejected by service > ok 65 VRF: TCP-AO key (l3index=0) + TCP-MD5 key (l3index=N) > ok 66 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=0) > ok 67 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (no l3index): prefailed as expected: Key was rejected by service > ok 68 VRF: TCP-MD5 key (no l3index) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > ok 69 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=0) > ok 70 VRF: TCP-MD5 key (l3index=0) + TCP-AO key (l3index=N) > ok 71 VRF: TCP-AO key (l3index=N) + TCP-MD5 key (l3index=N): prefailed as expected: Key was rejected by service > ok 72 VRF: TCP-MD5 key (l3index=N) + TCP-AO key (l3index=N): prefailed as expected: Key was rejected by service > # Totals: pass:72 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add test for TCP-AO add setsockopt() commandDmitry Safonov
Verify corner-cases for UAPI. Sample output: > # ./setsockopt-closed_ipv4 > 1..120 > # 1657[lib/setup.c:254] rand seed 1681938184 > TAP version 13 > ok 1 AO add: minimum size > ok 2 AO add: extended size > ok 3 AO add: null optval > ok 4 AO del: minimum size > ok 5 AO del: extended size > ok 6 AO del: null optval > ok 7 AO set info: minimum size > ok 8 AO set info: extended size > ok 9 AO info get: : extended size > ok 10 AO set info: null optval > ok 11 AO get info: minimum size > ok 12 AO get info: extended size > ok 13 AO get info: null optval > ok 14 AO get info: null optlen > ok 15 AO get keys: minimum size > ok 16 AO get keys: extended size > ok 17 AO get keys: null optval > ok 18 AO get keys: null optlen > ok 19 key add: too big keylen > ok 20 key add: using reserved padding > ok 21 key add: using reserved2 padding > ok 22 key add: wrong address family > ok 23 key add: port (unsupported) > ok 24 key add: no prefix, addr > ok 25 key add: no prefix, any addr > ok 26 key add: prefix, any addr > ok 27 key add: too big prefix > ok 28 key add: too short prefix > ok 29 key add: bad key flags > ok 30 key add: add current key on a listen socket > ok 31 key add: add rnext key on a listen socket > ok 32 key add: add current+rnext key on a listen socket > ok 33 key add: add key and set as current > ok 34 key add: add key and set as rnext > ok 35 key add: add key and set as current+rnext > ok 36 key add: ifindex without TCP_AO_KEYF_IFNINDEX > ok 37 key add: non-existent VRF > ok 38 optmem limit was hit on adding 69 key > ok 39 key add: maclen bigger than TCP hdr > ok 40 key add: bad algo > ok 41 key del: using reserved padding > ok 42 key del: using reserved2 padding > ok 43 key del: del and set current key on a listen socket > ok 44 key del: del and set rnext key on a listen socket > ok 45 key del: del and set current+rnext key on a listen socket > ok 46 key del: bad key flags > ok 47 key del: ifindex without TCP_AO_KEYF_IFNINDEX > ok 48 key del: non-existent VRF > ok 49 key del: set non-exising current key > ok 50 key del: set non-existing rnext key > ok 51 key del: set non-existing current+rnext key > ok 52 key del: set current key > ok 53 key del: set rnext key > ok 54 key del: set current+rnext key > ok 55 key del: set as current key to be removed > ok 56 key del: set as rnext key to be removed > ok 57 key del: set as current+rnext key to be removed > ok 58 key del: async on non-listen > ok 59 key del: non-existing sndid > ok 60 key del: non-existing rcvid > ok 61 key del: incorrect addr > ok 62 key del: correct key delete > ok 63 AO info set: set current key on a listen socket > ok 64 AO info set: set rnext key on a listen socket > ok 65 AO info set: set current+rnext key on a listen socket > ok 66 AO info set: using reserved padding > ok 67 AO info set: using reserved2 padding > ok 68 AO info set: accept_icmps > ok 69 AO info get: accept_icmps > ok 70 AO info set: ao required > ok 71 AO info get: ao required > ok 72 AO info set: ao required with MD5 key > ok 73 AO info set: set non-existing current key > ok 74 AO info set: set non-existing rnext key > ok 75 AO info set: set non-existing current+rnext key > ok 76 AO info set: set current key > ok 77 AO info get: set current key > ok 78 AO info set: set rnext key > ok 79 AO info get: set rnext key > ok 80 AO info set: set current+rnext key > ok 81 AO info get: set current+rnext key > ok 82 AO info set: set counters > ok 83 AO info get: set counters > ok 84 AO info set: no-op > ok 85 AO info get: no-op > ok 86 get keys: no ao_info > ok 87 get keys: proper tcp_ao_get_mkts() > ok 88 get keys: set out-only pkt_good counter > ok 89 get keys: set out-only pkt_bad counter > ok 90 get keys: bad keyflags > ok 91 get keys: ifindex without TCP_AO_KEYF_IFNINDEX > ok 92 get keys: using reserved field > ok 93 get keys: no prefix, addr > ok 94 get keys: no prefix, any addr > ok 95 get keys: prefix, any addr > ok 96 get keys: too big prefix > ok 97 get keys: too short prefix > ok 98 get keys: prefix + addr > ok 99 get keys: get_all + prefix > ok 100 get keys: get_all + addr > ok 101 get keys: get_all + sndid > ok 102 get keys: get_all + rcvid > ok 103 get keys: current + prefix > ok 104 get keys: current + addr > ok 105 get keys: current + sndid > ok 106 get keys: current + rcvid > ok 107 get keys: rnext + prefix > ok 108 get keys: rnext + addr > ok 109 get keys: rnext + sndid > ok 110 get keys: rnext + rcvid > ok 111 get keys: get_all + current > ok 112 get keys: get_all + rnext > ok 113 get keys: current + rnext > ok 114 key add: duplicate: full copy > ok 115 key add: duplicate: any addr key on the socket > ok 116 key add: duplicate: add any addr key > ok 117 key add: duplicate: add any addr for the same subnet > ok 118 key add: duplicate: full copy of a key > ok 119 key add: duplicate: RecvID differs > ok 120 key add: duplicate: SendID differs > # Totals: pass:120 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add a test for TCP-AO keys matchingDmitry Safonov
Add TCP-AO tests on connect()/accept() pair. SNMP counters exposed by kernel are very useful here to verify the expected behavior of TCP-AO. Expected output for ipv4 version: > # ./connect-deny_ipv4 > 1..19 > # 1702[lib/setup.c:254] rand seed 1680553689 > TAP version 13 > ok 1 Non-AO server + AO client > ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 3 AO server + Non-AO client > ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1 > ok 5 Wrong password > ok 6 Wrong password: counter TCPAOBad increased 0 => 1 > ok 7 Wrong rcv id > ok 8 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2 > ok 9 Wrong snd id > ok 10 Wrong snd id: counter TCPAOGood increased 0 => 1 > ok 11 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3 > ok 12 Server: Wrong addr > ok 13 Client: Wrong addr: connect() was prevented > ok 14 rcv id != snd id: connected > ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3 > ok 16 Server: prefix match: connected > ok 17 Server: prefix match: counter TCPAOGood increased 4 => 6 > ok 18 Client: prefix match: connected > ok 19 Client: prefix match: counter TCPAOGood increased 7 => 9 > # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version: > # ./connect-deny_ipv6 > 1..19 > # 1725[lib/setup.c:254] rand seed 1680553711 > TAP version 13 > ok 1 Non-AO server + AO client > ok 2 Non-AO server + AO client: counter TCPAOKeyNotFound increased 0 => 1 > ok 3 AO server + Non-AO client: counter TCPAORequired increased 0 => 1 > ok 4 AO server + Non-AO client > ok 5 Wrong password: counter TCPAOBad increased 0 => 1 > ok 6 Wrong password > ok 7 Wrong rcv id: counter TCPAOKeyNotFound increased 1 => 2 > ok 8 Wrong rcv id > ok 9 Wrong snd id: counter TCPAOGood increased 0 => 1 > ok 10 Wrong snd id > ok 11 Server: Wrong addr > ok 12 Server: Wrong addr: counter TCPAOKeyNotFound increased 2 => 3 > ok 13 Client: Wrong addr: connect() was prevented > ok 14 rcv id != snd id: connected > ok 15 rcv id != snd id: counter TCPAOGood increased 1 => 3 > ok 16 Server: prefix match: connected > ok 17 Server: prefix match: counter TCPAOGood increased 5 => 7 > ok 18 Client: prefix match: connected > ok 19 Client: prefix match: counter TCPAOGood increased 8 => 10 > # Totals: pass:19 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO ICMPs accept testDmitry Safonov
Reverse to icmps-discard test: the server accepts ICMPs, using TCP_AO_CMDF_ACCEPT_ICMP and it is expected to fail under ICMP flood from client. Test that the default pre-TCP-AO behaviour functions when TCP_AO_CMDF_ACCEPT_ICMP is set. Expected output for ipv4 version (in case it receives ICMP_PROT_UNREACH): > # ./icmps-accept_ipv4 > 1..3 > # 3209[lib/setup.c:166] rand seed 1642623870 > TAP version 13 > # 3209[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1 > # 3209[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1 > # 3209[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76 > # 3209[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1 > # 3209[lib/proc.c:207] Tcp InSegs: 3 => 23 > # 3209[lib/proc.c:207] Tcp OutSegs: 2 => 22 > # 3209[lib/proc.c:207] IcmpMsg InType3: 0 => 4 > # 3209[lib/proc.c:207] Icmp InMsgs: 0 => 4 > # 3209[lib/proc.c:207] Icmp InDestUnreachs: 0 => 4 > # 3209[lib/proc.c:207] Ip InReceives: 3 => 27 > # 3209[lib/proc.c:207] Ip InDelivers: 3 => 27 > # 3209[lib/proc.c:207] Ip OutRequests: 2 => 22 > # 3209[lib/proc.c:207] IpExt InOctets: 288 => 3420 > # 3209[lib/proc.c:207] IpExt OutOctets: 124 => 3244 > # 3209[lib/proc.c:207] IpExt InNoECTPkts: 3 => 25 > # 3209[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3209[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20 > # 3209[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19 > # 3209[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23 > ok 1 InDestUnreachs delivered 4 > ok 2 server failed with -92: Protocol not available > ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version (in case it receives ADM_PROHIBITED): > # ./icmps-accept_ipv6 > 1..3 > # 3277[lib/setup.c:166] rand seed 1642624035 > TAP version 13 > # 3277[lib/proc.c:207] Snmp6 Ip6InReceives: 6 => 31 > # 3277[lib/proc.c:207] Snmp6 Ip6InDelivers: 4 => 29 > # 3277[lib/proc.c:207] Snmp6 Ip6OutRequests: 4 => 24 > # 3277[lib/proc.c:207] Snmp6 Ip6InOctets: 592 => 4492 > # 3277[lib/proc.c:207] Snmp6 Ip6OutOctets: 332 => 3852 > # 3277[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 6 => 31 > # 3277[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 6 > # 3277[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 5 > # 3277[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 5 > # 3277[lib/proc.c:207] Tcp InSegs: 3 => 23 > # 3277[lib/proc.c:207] Tcp OutSegs: 2 => 22 > # 3277[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3277[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 20 > # 3277[lib/proc.c:207] TcpExt TCPDelivered: 0 => 19 > # 3277[lib/proc.c:207] TcpExt TCPAOGood: 3 => 23 > ok 1 Icmp6InDestUnreachs delivered 5 > ok 2 server failed with -13: Permission denied > ok 3 TCPAODroppedIcmps counter didn't change: 0 >= 0 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 With some luck the server may fail with ECONNREFUSED (depending on what icmp packet was delivered firstly). For the kernel error handlers see: tab_unreach[] and icmp_err_convert[]. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Verify that TCP-AO complies with ignoring ICMPsDmitry Safonov
Hand-crafted ICMP packets are sent to the server, the server checks for hard/soft errors and fails if any. Expected output for ipv4 version: > # ./icmps-discard_ipv4 > 1..3 > # 3164[lib/setup.c:166] rand seed 1642623745 > TAP version 13 > # 3164[lib/proc.c:207] Snmp6 Ip6InReceives: 0 => 1 > # 3164[lib/proc.c:207] Snmp6 Ip6InNoRoutes: 0 => 1 > # 3164[lib/proc.c:207] Snmp6 Ip6InOctets: 0 => 76 > # 3164[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 0 => 1 > # 3164[lib/proc.c:207] Tcp InSegs: 2 => 203 > # 3164[lib/proc.c:207] Tcp OutSegs: 1 => 202 > # 3164[lib/proc.c:207] IcmpMsg InType3: 0 => 543 > # 3164[lib/proc.c:207] Icmp InMsgs: 0 => 543 > # 3164[lib/proc.c:207] Icmp InDestUnreachs: 0 => 543 > # 3164[lib/proc.c:207] Ip InReceives: 2 => 746 > # 3164[lib/proc.c:207] Ip InDelivers: 2 => 746 > # 3164[lib/proc.c:207] Ip OutRequests: 1 => 202 > # 3164[lib/proc.c:207] IpExt InOctets: 132 => 61684 > # 3164[lib/proc.c:207] IpExt OutOctets: 68 => 31324 > # 3164[lib/proc.c:207] IpExt InNoECTPkts: 2 => 744 > # 3164[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3164[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200 > # 3164[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199 > # 3164[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203 > # 3164[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 541 > ok 1 InDestUnreachs delivered 543 > ok 2 Server survived 20000 bytes of traffic > ok 3 ICMPs ignored 541 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Expected output for ipv6 version: > # ./icmps-discard_ipv6 > 1..3 > # 3186[lib/setup.c:166] rand seed 1642623803 > TAP version 13 > # 3186[lib/proc.c:207] Snmp6 Ip6InReceives: 4 => 568 > # 3186[lib/proc.c:207] Snmp6 Ip6InDelivers: 3 => 564 > # 3186[lib/proc.c:207] Snmp6 Ip6OutRequests: 2 => 204 > # 3186[lib/proc.c:207] Snmp6 Ip6InMcastPkts: 1 => 4 > # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastPkts: 0 => 1 > # 3186[lib/proc.c:207] Snmp6 Ip6InOctets: 320 => 70420 > # 3186[lib/proc.c:207] Snmp6 Ip6OutOctets: 160 => 35512 > # 3186[lib/proc.c:207] Snmp6 Ip6InMcastOctets: 72 => 336 > # 3186[lib/proc.c:207] Snmp6 Ip6OutMcastOctets: 0 => 76 > # 3186[lib/proc.c:207] Snmp6 Ip6InNoECTPkts: 4 => 568 > # 3186[lib/proc.c:207] Snmp6 Icmp6InMsgs: 1 => 361 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutMsgs: 1 => 2 > # 3186[lib/proc.c:207] Snmp6 Icmp6InDestUnreachs: 0 => 360 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutMLDv2Reports: 0 => 1 > # 3186[lib/proc.c:207] Snmp6 Icmp6InType1: 0 => 360 > # 3186[lib/proc.c:207] Snmp6 Icmp6OutType143: 0 => 1 > # 3186[lib/proc.c:207] Tcp InSegs: 2 => 203 > # 3186[lib/proc.c:207] Tcp OutSegs: 1 => 202 > # 3186[lib/proc.c:207] TcpExt TCPPureAcks: 1 => 2 > # 3186[lib/proc.c:207] TcpExt TCPOrigDataSent: 0 => 200 > # 3186[lib/proc.c:207] TcpExt TCPDelivered: 0 => 199 > # 3186[lib/proc.c:207] TcpExt TCPAOGood: 2 => 203 > # 3186[lib/proc.c:207] TcpExt TCPAODroppedIcmps: 0 => 360 > ok 1 Icmp6InDestUnreachs delivered 360 > ok 2 Server survived 20000 bytes of traffic > ok 3 ICMPs ignored 360 > # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-17selftests/net: Add TCP-AO libraryDmitry Safonov
Provide functions to create selftests dedicated to TCP-AO. They can run in parallel, as they use temporary net namespaces. They can be very specific to the feature being tested. This will allow to create a lot of TCP-AO tests, without complicating one binary with many --options and to create scenarios, that are hard to put in bash script that uses one binary. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-15selftests/bpf: Temporarily disable dummy_struct_ops test on s390Alexei Starovoitov
Temporarily disable dummy_struct_ops test on s390. The breakage is likely due to commit 2cd3e3772e41 ("x86/cfi,bpf: Fix bpf_struct_ops CFI"). Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-12-15cred: get rid of CONFIG_DEBUG_CREDENTIALSJens Axboe
This code is rarely (never?) enabled by distros, and it hasn't caught anything in decades. Let's kill off this legacy debug code. Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-07-16 02:18:21 +0000