Age | Commit message (Collapse) | Author |
|
Correct typo in bpftool profiler and change all instances of 'MATRICS' to
'METRICS' in the profiler.bpf.c file.
Signed-off-by: Swan Beaujard <beaujardswan@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240602225812.81171-1-beaujardswan@gmail.com
|
|
'libcap' is unused since commit b1c2768a82b9 ("bpf: selftests: Remove libcap
usage from test_verifier"). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240602234112.225107-4-linux@treblig.org
|
|
'key_t' is unused in a couple of files since the original commit 60dd49ea6539
("selftests/bpf: Add test for bpf array map iterators"). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240602234112.225107-3-linux@treblig.org
|
|
'scale_test_def' is unused since commit 3762a39ce85f ("selftests/bpf: Split out
bpf_verif_scale selftests into multiple tests"). Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240602234112.225107-2-linux@treblig.org
|
|
Add a selftest which checks that the sysctl is present in a netns,
that the value is read from the init one, and that it's readonly.
Signed-off-by: Matteo Croce <teknoraver@meta.com>
Link: https://lore.kernel.org/r/20240530232722.45255-3-technoboy85@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"This fixes a wrong path walk triggered by syzkaller"
* tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add layout1.refer_mount_root
landlock: Fix d_parent walk
|
|
Make sure to preserve and/or enforce FD_CLOEXEC flag on duped FDs.
Use dup3() with O_CLOEXEC flag for that.
Without this fix libbpf effectively clears FD_CLOEXEC flag on each of BPF
map/prog FD, which is definitely not the right or expected behavior.
Reported-by: Lennart Poettering <lennart@poettering.net>
Fixes: bc308d011ab8 ("libbpf: call dup2() syscall directly")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529223239.504241-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Guard close(link_fd) with extra link_fd >= 0 check to prevent close(-1).
Detected by Coverity static analysis.
Fixes: 04d939a2ab22 ("libbpf: detect broken PID filtering logic for multi-uprobe")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240529231212.768828-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recent kernel change ([0]) changed inet_csk_accept() prototype. Adapt
progs/test_sk_storage_tracing.c to take that into account.
[0] 92ef0fd55ac8 ("net: change proto and proto_ops accept type")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240528223218.3445297-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...clang issues this warning:
futex_requeue_pi.c:403:17: warning: passing 'const char **' to parameter
of type 'char **' discards qualifiers in nested pointer types
[-Wincompatible-pointer-types-discards-qualifiers]
This warning fires because test_name is passed into asprintf(3), which
then changes it.
Fix this by simply removing the const qualifier. This is a local
automatic variable in a very short function, so there is not much need
to use the compiler to enforce const-ness at this scope.
[1] https://lore.kernel.org/all/20240329-selftests-libmk-llvm-rfc-v1-1-2f9ed7d1c49f@valentinobst.de/
Fixes: f17d8a87ecb5 ("selftests: fuxex: Report a unique test name per run of futex_requeue_pi")
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The .PHONY targets "all" and "clean" are both already defined in the
file that is included in the very next line:
../lib.mk.
Remove this duplicate code.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add tests to check error codes when linking or renaming a mount root
directory. This previously triggered a kernel warning, but it is fixed
with the previous commit.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20240516181935.1645983-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Commit eb50d0f250e9 ("selftests/ftrace: Choose target function for filter
test from samples") choose the target function from samples, but sometimes
this test failes randomly because the target function does not hit at the
next time. So retry getting samples up to 10 times.
Fixes: eb50d0f250e9 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Folks working on a C++ codegen would like to reuse the attribute
helpers directly. Add the few necessary casts, it's not too ugly.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240529192031.3785761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To support epoll, a new instance of file_operations, bpf_link_fops_poll,
has been added for links that support epoll. The pid_iter.bpf.c checks
f_ops for links and other BPF objects. The check should fail for struct_ops
links without this patch.
Acked-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-9-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Verify whether a user space program is informed through epoll with EPOLLHUP
when a struct_ops object is detached.
The BPF code in selftests/bpf/progs/struct_ops_module.c has become
complex. Therefore, struct_ops_detach.c has been added to segregate the BPF
code for detachment tests from the BPF code for other tests based on the
recommendation of Andrii Nakryiko.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-6-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Pass an additional pointer of bpf_struct_ops_link to callback function reg,
unreg, and update provided by subsystems defined in bpf_struct_ops. A
bpf_struct_ops_map can be registered for multiple links. Passing a pointer
of bpf_struct_ops_link helps subsystems to distinguish them.
This pointer will be used in the later patches to let the subsystem
initiate a detachment on a link that was registered to it previously.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240530065946.979330-2-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Although the data_race() kerneldoc header accurately states what it does,
some of the implications and usage patterns are non-obvious. Therefore,
add a brief locking example and also state how to have KCSAN ignore
accesses while also preventing the compiler from folding, spindling,
or otherwise mutilating the access.
[ paulmck: Apply Bart Van Assche feedback. ]
[ paulmck: Apply feedback from Marco Elver. ]
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Jens Axboe <axboe@kernel.dk>
|
|
libbpf can deduce program type and attach type from the ELF section name.
We don't need to pass it out-of-band if we switch to libbpf convention [1].
[1] https://docs.kernel.org/bpf/libbpf/program_types.html
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240522080936.2475833-1-jakub@cloudflare.com
|
|
The minimal requirement for running Vector subextension on Linux is
ZVE32X. So change the test accordingly to run prctl as long as it find
it.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240510-zve-detection-v5-8-0711bdd26c12@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
It's slightly better to set _GNU_SOURCE in the source code, but if one
must do it via the compiler invocation, then the best way to do so is
this:
$(CC) -D_GNU_SOURCE=
...because otherwise, if this form is used:
$(CC) -D_GNU_SOURCE
...then that leads the compiler to set a value, as if you had passed in:
$(CC) -D_GNU_SOURCE=1
That, in turn, leads to warnings under both gcc and clang, like this:
futex_requeue_pi.c:20: warning: "_GNU_SOURCE" redefined
Fix this by using the "-D_GNU_SOURCE=" form.
Reviewed-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow filters to be added to perf top events. One use is to workaround
issues with:
```
$ perf top --uid="$(id -u)"
```
which tries to scan /proc find processes belonging to the uid and can
fail in such a pid terminates between the scan and the
perf_event_open reporting:
```
Error:
The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:P).
/bin/dmesg | grep -i perf may provide additional information.
```
A similar filter:
```
$ perf top -e cycles:P --filter "uid == $(id -u)"
```
doesn't fail this way.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-4-irogers@google.com
|
|
Allow the BPF filter to use the uid and gid terms determined by the
bpf_get_current_uid_gid BPF helper. For example, the following will
record the cpu-clock event system wide discarding samples that don't
belong to the current user.
$ perf record -e cpu-clock --filter "uid == $(id -u)" -a sleep 0.1
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-3-irogers@google.com
|
|
Give the term types their own enum so that additional terms can be
added that don't correspond to a PERF_SAMPLE_xx flag. The term values
are numerically ascending rather than bit field positions, this means
they need translating to a PERF_SAMPLE_xx bit field in certain places
using a shift.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: bpf@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240524205227.244375-2-irogers@google.com
|
|
In general a read fills 4kb so filling the buffer is a 1 in 4096
operation, move it out of the io__get_char function to avoid some
checking overhead and to better hint the function is good to inline.
For perf's IO intensive internal (non-rigorous) benchmarks there's a
small improvement to kallsyms-parsing with a default build.
Before:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 146.322 usec (+- 0.305 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.399 usec
Average data synthesis took: 145.056 usec (+- 0.155 usec)
Average num. events: 329.000 (+- 0.000)
Average time per event 0.441 usec
Average kallsyms__parse took: 162.313 ms (+- 0.599 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 53.720 usec (+- 7.823 usec)
Average PMU scanning took: 375.145 usec (+- 23.974 usec)
```
After:
```
$ perf bench internals all
Computing performance of single threaded perf event synthesis by
synthesizing events on the perf process itself:
Average synthesis took: 127.829 usec (+- 0.079 usec)
Average num. events: 61.000 (+- 0.000)
Average time per event 2.096 usec
Average data synthesis took: 133.652 usec (+- 0.101 usec)
Average num. events: 327.000 (+- 0.000)
Average time per event 0.409 usec
Average kallsyms__parse took: 150.415 ms (+- 0.313 ms)
...
Computing performance of sysfs PMU event scan for 100 times
Average core PMU scanning took: 47.790 usec (+- 1.178 usec)
Average PMU scanning took: 376.945 usec (+- 23.683 usec)
```
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240519181716.4088459-1-irogers@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- gro: initialize network_offset in network layer
- tcp: reduce accepted window in NEW_SYN_RECV state
Current release - new code bugs:
- eth: mlx5e: do not use ptp structure for tx ts stats when not
initialized
- eth: ice: check for unregistering correct number of devlink params
Previous releases - regressions:
- bpf: Allow delete from sockmap/sockhash only if update is allowed
- sched: taprio: extend minimum interval restriction to entire cycle
too
- netfilter: ipset: add list flush to cancel_gc
- ipv4: fix address dump when IPv4 is disabled on an interface
- sock_map: avoid race between sock_map_close and sk_psock_put
- eth: mlx5: use mlx5_ipsec_rx_status_destroy to correctly delete
status rules
Previous releases - always broken:
- core: fix __dst_negative_advice() race
- bpf:
- fix multi-uprobe PID filtering logic
- fix pkt_type override upon netkit pass verdict
- netfilter: tproxy: bail out if IP has been disabled on the device
- af_unix: annotate data-race around unix_sk(sk)->addr
- eth: mlx5e: fix UDP GSO for encapsulated packets
- eth: idpf: don't enable NAPI and interrupts prior to allocating Rx
buffers
- eth: i40e: fully suspend and resume IO operations in EEH case
- eth: octeontx2-pf: free send queue buffers incase of leaf to inner
- eth: ipvlan: dont Use skb->sk in ipvlan_process_v{4,6}_outbound"
* tag 'net-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
netdev: add qstat for csum complete
ipvlan: Dont Use skb->sk in ipvlan_process_v{4,6}_outbound
net: ena: Fix redundant device NUMA node override
ice: check for unregistering correct number of devlink params
ice: fix 200G PHY types to link speed mapping
i40e: Fully suspend and resume IO operations in EEH case
i40e: factoring out i40e_suspend/i40e_resume
e1000e: move force SMBUS near the end of enable_ulp function
net: dsa: microchip: fix RGMII error in KSZ DSA driver
ipv4: correctly iterate over the target netns in inet_dump_ifaddr()
net: fix __dst_negative_advice() race
nfc/nci: Add the inconsistency check between the input data length and count
MAINTAINERS: dwmac: starfive: update Maintainer
net/sched: taprio: extend minimum interval restriction to entire cycle too
net/sched: taprio: make q->picos_per_byte available to fill_sched_entry()
netfilter: nft_fib: allow from forward/input without iif selector
netfilter: tproxy: bail out if IP has been disabled on the device
netfilter: nft_payload: skbuff vlan metadata mangle support
net: ti: icssg-prueth: Fix start counter for ft1 filter
sock_map: avoid race between sock_map_close and sk_psock_put
...
|
|
Recent commit 0cfe71f45f42 ("netdev: add queue stats") added
a lot of useful stats, but only those immediately needed by virtio.
Presumably virtio does not support CHECKSUM_COMPLETE,
so statistic for that form of checksumming wasn't included.
Other drivers will definitely need it, in fact we expect it
to be needed in net-next soon (mlx5). So let's add the definition
of the counter for CHECKSUM_COMPLETE to uAPI in net already,
so that the counters are in a more natural order (all subsequent
counters have not been present in any released kernel, yet).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Fixes: 0cfe71f45f42 ("netdev: add queue stats")
Link: https://lore.kernel.org/r/20240529163547.3693194-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PROT_NONE is also useful information, so do not omit the mmap prot even
though it is 0. syscall_arg__scnprintf_mmap_prot() could print PROT_NONE
for prot 0.
Before: PROT_NONE is not shown.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2979231 syscalls:sys_enter_mmap(len: 4220888, flags: PRIVATE|ANONYMOUS)
After: PROT_NONE is displayed.
$ sudo perf trace -e syscalls:sys_enter_mmap --filter prot==0 -- ls
0.000 ls/2975708 syscalls:sys_enter_mmap(len: 4220888, prot: NONE, flags: PRIVATE|ANONYMOUS)
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240522033542.1359421-3-changbin.du@huawei.com
|
|
For some parameters, it is best to also display them when they are 0,
e.g. flags.
Here we only check the show_zero property and let arg printer handle
special cases.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240522033542.1359421-2-changbin.du@huawei.com
|
|
The generated .rst has pre and post headings without any values, e.g.
here:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#device-id-get
Emit keys and values in the generated .rst
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Generate op flags as an inline list instead of a stringified python
value.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The doc strings for do/dump ops are emitted as toplevel .rst constructs
so they can be multi-line. Pass multi-line text straight through to the
.rst to retain any simple formatting from the .yaml
This fixes e.g. list formatting for the pin-get docs in dpll.yaml:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#pin-get
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the newline replacement in ynl-gen-rst.py to put spaces between
concatenated lines. This fixes the broken doc string formatting.
See the dpll docs for an example of broken concatenation:
https://docs.kernel.org/6.9/networking/netlink_spec/dpll.html#lock-status
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240528140652.9445-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for the bits iter:
- Positive cases
- Bit mask representing a single word (8-byte unit)
- Bit mask representing data spanning more than one word
- The index of the set bit
- Nagative cases
- bpf_iter_bits_destroy() is required after calling
bpf_iter_bits_new()
- bpf_iter_bits_destroy() can only destroy an initialized iter
- bpf_iter_bits_next() must use an initialized iter
- Bit mask representing zero words
- Bit mask representing fewer words than expected
- Case for ENOMEM
- Case for NULL pointer
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240517023034.48138-3-laoar.shao@gmail.com
|
|
Fix build error on ppc64:
dev_in_maps.c: In function ‘get_file_dev_and_inode’:
dev_in_maps.c:60:59: error: format ‘%llu’ expects argument of type
‘long long unsigned int *’, but argument 7 has type ‘__u64 *’ {aka ‘long
unsigned int *’} [-Werror=format=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Fix warnings like:
test_cachestat.c: In function ‘print_cachestat’:
test_cachestat.c:30:38: warning: format ‘%llu’ expects argument of
type ‘long long unsigned int’, but argument 2 has type ‘__u64’ {aka
‘long unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e3548236d ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Update required config options for running all tests.
This also sorts the config entries alphabetically.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca3d ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The pcmtest driver tests use the kselftest harness which requires that
_GNU_SOURCE is defined but nothing causes it to be defined. Since the
KHDR_INCLUDES Makefile variable has had the required define added let's
use that, this should provide some futureproofing.
Fixes: daef47b89efd ("selftests: Compile kselftest headers with -D_GNU_SOURCE")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Assorted typo fixes.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240521223555.858859-1-irogers@google.com
|
|
It is possible for syzbot to side-step the restriction imposed by the
blamed commit in the Fixes: tag, because the taprio UAPI permits a
cycle-time different from (and potentially shorter than) the sum of
entry intervals.
We need one more restriction, which is that the cycle time itself must
be larger than N * ETH_ZLEN bit times, where N is the number of schedule
entries. This restriction needs to apply regardless of whether the cycle
time came from the user or was the implicit, auto-calculated value, so
we move the existing "cycle == 0" check outside the "if "(!new->cycle_time)"
branch. This way covers both conditions and scenarios.
Add a selftest which illustrates the issue triggered by syzbot.
Fixes: b5b73b26b3ca ("taprio: Fix allowing too small intervals")
Reported-by: syzbot+a7d2b1d5d1af83035567@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000007d66bc06196e7c66@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20240527153955.553333-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit b5b73b26b3ca ("taprio: Fix allowing too small intervals"), a
comparison of user input against length_to_duration(q, ETH_ZLEN) was
introduced, to avoid RCU stalls due to frequent hrtimers.
The implementation of length_to_duration() depends on q->picos_per_byte
being set for the link speed. The blamed commit in the Fixes: tag has
moved this too late, so the checks introduced above are ineffective.
The q->picos_per_byte is zero at parse_taprio_schedule() ->
parse_sched_list() -> parse_sched_entry() -> fill_sched_entry() time.
Move the taprio_set_picos_per_byte() call as one of the first things in
taprio_change(), before the bulk of the netlink attribute parsing is
done. That's because it is needed there.
Add a selftest to make sure the issue doesn't get reintroduced.
Fixes: 09dbdf28f9f9 ("net/sched: taprio: fix calculation of maximum gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240527153955.553333-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch uses new helper start_server_str() in do_test() in bpf_tcp_ca.c
to accept a struct network_helper_opts argument instead of using
start_server() and settcpca(). Then change the type of the first paramenter
of do_test() into a struct network_helper_opts one.
Define its own cb_opts and opts for each test, set its own cc name into
cb_opts.cc, and cc_cb() into post_socket_cb callback, then pass it to
do_test().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6e1b6555e3284e77c8aa60668c61a66c5f99aa37.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses start_server_str() helper in test_dctcp_fallback() in
bpf_tcp_ca.c, instead of using start_server() and settcpca(). For
support opts in start_server_str() helper, opts->cb_opts needs to be
passed to post_socket_cb() in __start_server().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/414c749321fa150435f7fe8e12c80fec8b447c78.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Since the post_socket_cb() callback is added in struct network_helper_opts,
it's make sense to use it not only in __start_server(), but also in
connect_to_fd_opts(). Then it can be used to set TCP_CONGESTION sockopt.
Add a "void *" type member cb_opts into struct network_helper_opts, and add
a new struct named cb_opts in prog_tests/bpf_tcp_ca.c, then cc can be moved
into struct cb_opts from network_helper_opts. Define a new callback cc_cb()
to set TCP_CONGESTION sockopt, and set it to post_socket_cb pointer of opts.
Define a new cb_opts cubic, set it to cb_opts of opts. Pass this opts to
connect_to_fd_opts() in test_dctcp_fallback().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/b512bb8d8f6854c9ea5c409b69d1bf37c6f272c6.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
It's a tech debt that start_server() does not take the "opts" argument.
It's pretty handy to have start_server() as a helper that takes string
address.
So this patch creates a new helper start_server_str(). Then start_server()
can be a wrapper of it.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/606e6cfd7e1aff8bc51ede49862eed0802e52170.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
It's not possible to have one generic/common "struct post_socket_opts"
for all tests. It's better to have the individual test define its own
callback opts struct.
So this patch drops struct post_socket_opts, and changes the second
parameter of post_socket_cb as "void *" type.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f8bda41c7cb9cb6979b2779f89fb3a684234304f.1716638248.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|