| Age | Commit message (Collapse) | Author |
|---|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82fb07 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 1a418cb8e888 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: b08fbf241064 ("selftests: add test-cases for MPTCP MP_JOIN")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped".
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc685321b ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Selftests are supposed to run on any kernels, including the old ones not
supporting MPTCP.
A new check is then added to make sure MPTCP is supported. If not, the
test stops and is marked as "skipped". Note that this check can also
mark the test as failed if 'SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES' env
var is set to 1: by doing that, we can make sure a test is not being
skipped by mistake.
A new shared file is added here to be able to re-used the same check in
the different selftests we have.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
BusyBox's 'cmp' command doesn't support the '--bytes' parameter.
Some CIs -- i.e. LKFT -- use BusyBox and have the mptcp_join.sh test
failing [1] because their 'cmp' command doesn't support this '--bytes'
option:
cmp: unrecognized option '--bytes=1024'
BusyBox v1.35.0 () multi-call binary.
Usage: cmp [-ls] [-n NUM] FILE1 [FILE2]
Instead, 'head --bytes' can be used as this option is supported by
BusyBox. A temporary file is needed for this operation.
Because it is apparently quite common to use BusyBox, it is certainly
better to backport this fix to impacted kernels.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-mainline-master/build/v6.3-rc5-5-g148341f0a2f5/testrun/16088933/suite/kselftest-net-mptcp/test/net_mptcp_userspace_pm_sh/log [1]
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support decoding scalars as enums in struct members for genetlink-legacy
specs.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This eliminates the need for e.g. --json '{"dp-ifindex":0}' which is not
too big a deal for ovs but will get tiresome for fixed header structs that
have many members.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"User events:
- Use long instead of int for storing the enable set/clear bit, as it
was found that big endian machines could end up using the wrong
bits.
- Split allocating mm and attaching it. This keeps the allocation
separate from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can
schedule. The RCU protection is no longer needed with the above
split of mm allocation and attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking
requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat
interrupt triggering when tracing is off. The timer interrupt
handler needs to always wake up the timerlat thread regardless if
tracing is enabled or not, otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables.
That modifier cannot be used for values, but can be used for
variables that are passed from one histogram to the next. This was
broken when adding the restriction to values as the variable logic
used the same code.
- Rename the special field "stacktrace" to "common_stacktrace".
Special fields (that are not actually part of the event, but can
act just like event fields, like 'comm' and 'timestamp') should be
prefixed with 'common_' for consistency. To keep backward
compatibility, 'stacktrace' can still be used (as with the special
field 'cpu'), but can be overridden if the event has a field called
'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic
events are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled
in when selftests are not configured.
- Add various cond_resched() around the selftest code, as the
softlock watchdog was triggering much more often. It appears that
the kernel runs slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer
instead of the top level one), I found that the selftests were
disabling prints to the debug instance.
This should not happen, as the selftests only disable printing to
the main buffer as the selftests examine the main buffer to see if
it has what it expects, and prints can make the tests fail.
Make the selftests only disable printing to the toplevel buffer,
and leave the instance buffers alone"
* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have function_graph selftest call cond_resched()
tracing: Only make selftest conditionals affect the global_trace
tracing: Make tracing_selftest_running/delete nops when not used
tracing: Have tracer selftests call cond_resched() before running
tracing: Move setting of tracing_selftest_running out of register_tracer()
tracing/selftests: Update synthetic event selftest to use common_stacktrace
tracing: Rename stacktrace field to common_stacktrace
tracing/histograms: Allow variables to have some modifiers
tracing/user_events: Document user_event_mm one-shot list usage
tracing/user_events: Rename link fields for clarity
tracing/user_events: Remove RCU lock while pinning pages
tracing/user_events: Split up mm alloc and attach
tracing/timerlat: Always wakeup the timerlat thread
tracing/user_events: Use long vs int for atomic bit ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link fixes from Dan Williams:
"The 'media ready' series prevents the driver from acting on bad
capacity information, and it moves some checks earlier in the init
sequence which impacts topics in the queue for 6.5.
Additional hotplug testing uncovered a missing enable for memory
decode. A debug crash fix is also included.
Summary:
- Stop trusting capacity data before the "media ready" indication
- Add missing HDM decoder capability enable for the cold-plug case
- Fix a debug message induced crash"
* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Explicitly initialize resources when media is not ready
cxl/port: Fix NULL pointer access in devm_cxl_add_port()
cxl: Move cxl_await_media_ready() to before capacity info retrieval
cxl: Wait Memory_Info_Valid before access memory related info
cxl/port: Enable the HDM decoder capability for switch ports
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-05-26
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 76 files changed, 2729 insertions(+), 1003 deletions(-).
The main changes are:
1) Add the capability to destroy sockets in BPF through a new kfunc,
from Aditi Ghag.
2) Support O_PATH fds in BPF_OBJ_PIN and BPF_OBJ_GET commands,
from Andrii Nakryiko.
3) Add capability for libbpf to resize datasec maps when backed via mmap,
from JP Kobryn.
4) Move all the test kfuncs for CI out of the kernel and into bpf_testmod,
from Jiri Olsa.
5) Big batch of xsk selftest improvements to prep for multi-buffer testing,
from Magnus Karlsson.
6) Show the target_{obj,btf}_id in tracing link's fdinfo and dump it
via bpftool, from Yafang Shao.
7) Various misc BPF selftest improvements to work with upcoming LLVM 17,
from Yonghong Song.
8) Extend bpftool to specify netdevice for resolving XDP hints,
from Larysa Zaremba.
9) Document masking in shift operations for the insn set document,
from Dave Thaler.
10) Extend BPF selftests to check xdp_feature support for bond driver,
from Lorenzo Bianconi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
bpf: Fix bad unlock balance on freeze_mutex
libbpf: Ensure FD >= 3 during bpf_map__reuse_fd()
libbpf: Ensure libbpf always opens files with O_CLOEXEC
selftests/bpf: Check whether to run selftest
libbpf: Change var type in datasec resize func
bpf: drop unnecessary bpf_capable() check in BPF_MAP_FREEZE command
libbpf: Selftests for resizing datasec maps
libbpf: Add capability for resizing datasec maps
selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests
libbpf: Add opts-based bpf_obj_pin() API and add support for path_fd
bpf: Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
libbpf: Start v1.3 development cycle
bpf: Validate BPF object in BPF_OBJ_PIN before calling LSM
bpftool: Specify XDP Hints ifname when loading program
selftests/bpf: Add xdp_feature selftest for bond device
selftests/bpf: Test bpf_sock_destroy
selftests/bpf: Add helper to get port using getsockname
bpf: Add bpf_sock_destroy kfunc
bpf: Add kfunc filter function to 'struct btf_kfunc_id_set'
bpf: udp: Implement batching for sockets iterator
...
====================
Link: https://lore.kernel.org/r/20230526222747.17775-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix incorrect output in in-tree gpio tools
- fix a shell coding issue in gpio-sim selftests
- correctly set the permissions for debugfs attributes exposed by
gpio-mockup
- fix chip name and pin count in gpio-f7188x for one of the supported
models
- fix numberspace pollution when using dynamically and statically
allocated GPIOs together
* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio-f7188x: fix chip name and pin count on Nuvoton chip
gpiolib: fix allocation of mixed dynamic/static GPIOs
gpio: mockup: Fix mode of debugfs files
selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
tools: gpio: fix debounce_period_us output of lsgpio
|
|
same time
'struct evsel' uses a union for the two lists. This turned out to be
error prone.
For example:
[root@quaco ~]# perf stat --bpf-prog 5246
Error: cpu-clock event does not have sample flags 66c660
failed to set filter "(null)" on event cpu-clock with 2 (No such file or directory)
[root@quaco ~]# perf stat --bpf-prog 5246
Fix this issue by separating the two lists.
Fixes: 56ec9457a4a20c5e ("perf bpf filter: Implement event sample filtering")
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@meta.com
Link: https://lore.kernel.org/r/20230519235757.3613719-1-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
3632679d9e4f879f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
That includes a define (IP_PROTOCOL) that isn't being used in generating
any id -> string table used by 'perf trace'.
Addresses this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/lkml/ZHD/Ms0DMq7viaq+@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Copy the kernel version of the header to fix the header diff build
warning. Some new definitions were only added to the tools side header,
but these are only used in Perf so move them to a different header.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://lore.kernel.org/r/20230522102604.1081416-1-james.clark@arm.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: acme@kernel.org
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Cc: siyanteng@loongson.cn
Cc: John Garry <john.g.garry@oracle.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
llvm-strip is not really required. Remove this dependency to make it
easier to build perf with BUILD_BPF_SKEL=1.
Committer notes:
This removes the need for the 'llvm' package just to get llvm-strip.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
demangle-cxx.cpp requires a C++ compiler, but feature checks may fail
because of the absence of this. Add a CONFIG_CXX_DEMANGLE so that the
source isn't built if not supported. Copy libbfd and cplus demangle
variants to a weak symbol-elf.c version so they aren't dependent on
C++. These variants are only built with the build option
BUILD_NONDISTRO=1.
Committer note:
This also handles this build break when a C++ compiler isn't available:
CXX /tmp/build/perf/util/demangle-cxx.o
/bin/sh: g++: command not found
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20230417192546.99923-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Change "../cs-etm.h" to just "../../../util/cs-etm.h" as ../cs-etm.h
doesn't exist.
Suggested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230515165039.544045-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
BPF CO-RE requires 3 underscores for the ignored suffix rule but it
mistakenly used only 2. Let's fix it.
Fixes: 3a8b8fc3174891c4 ("perf bpf filter: Support pre-5.16 kernels where 'mem_hops' isn't in 'union perf_mem_data_src'")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230525000307.3202449-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The option name should not have the dashes. Current version shows four
dashes for the option.
$ perf ftrace latency -h
Usage: perf ftrace [<options>] [<command>]
or: perf ftrace [<options>] -- [<command>] [<options>]
or: perf ftrace {trace|latency} [<options>] [<command>]
or: perf ftrace {trace|latency} [<options>] -- [<command>] [<options>]
-b, --use-bpf Use BPF to measure function latency
-n, ----use-nsec Use nano-second histogram
-T, --trace-funcs <func>
Show latency of given function
Fixes: 84005bb6148618cc ("perf ftrace latency: Add -n/--use-nsec option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230525212038.3535851-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Improve bpf_map__reuse_fd() logic and ensure that dup'ed map FD is
"good" (>= 3) and has O_CLOEXEC flags. Use fcntl(F_DUPFD_CLOEXEC) for
that, similarly to ensure_good_fd() helper we already use in low-level
APIs that work with bpf() syscall.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-2-andrii@kernel.org
|
|
Make sure that libbpf code always gets FD with O_CLOEXEC flag set,
regardless if file is open through open() or fopen(). For the latter
this means to add "e" to mode string, which is supported since pretty
ancient glibc v2.7.
Also drop the outdated TODO comment in usdt.c, which was already completed.
Suggested-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230525221311.2136408-1-andrii@kernel.org
|
|
To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.
Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Python 3.9.0 or newer supports combining dicts() with |,
but older versions of Python are still used in the wild
(e.g. on CentOS 8, which goes EoL May 31, 2024).
With Python 3.6.8 we get:
TypeError: unsupported operand type(s) for |: 'dict' and 'dict'
Use older syntax. Tested with non-legacy families only.
Fixes: f036d936ca57 ("tools: ynl: Add fixed-header support to ynl")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230524170712.2036128-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/raw.c
3632679d9e4f ("ipv{4,6}/raw: fix output xfrm lookup wrt protocol")
c85be08fc4fa ("raw: Stop using RTO_ONLINK.")
https://lore.kernel.org/all/20230525110037.2b532b83@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/freescale/fec_main.c
9025944fddfe ("net: fec: add dma_wmb to ensure correct descriptor values")
144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sockopt test invokes test__start_subtest and then unconditionally
asserts the success. That means that even if deny-listed, any test will
still run and potentially fail.
Evaluate the return value of test__start_subtest() to achieve the
desired behavior, as other tests do.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230525232248.640465-1-deso@posteo.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
|
|
This changes a local variable type that stores a new array id to match
the return type of btf__add_array().
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20230525001323.8554-1-inwardvessel@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds test coverage for resizing datasec maps. The first two
subtests resize the bss and custom data sections. In both cases, an
initial array (of length one) has its element set to one. After resizing
the rest of the array is filled with ones as well. A BPF program is then
run to sum the respective arrays and back on the userspace side the sum
is checked to be equal to the number of elements.
The third subtest attempts to perform resizing under conditions that
will result in either the resize failing or the BTF info being cleared.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-3-inwardvessel@gmail.com
|
|
This patch updates bpf_map__set_value_size() so that if the given map is
memory mapped, it will attempt to resize the mapped region. Initial
contents of the mapped region are preserved. BTF is not required, but
after the mapping is resized an attempt is made to adjust the associated
BTF information if the following criteria is met:
- BTF info is present
- the map is a datasec
- the final variable in the datasec is an array
... the resulting BTF info will be updated so that the final array
variable is associated with a new BTF array type sized to cover the
requested size.
Note that the initial resizing of the memory mapped region can succeed
while the subsequent BTF adjustment can fail. In this case, BTF info is
dropped from the map by clearing the key and value type.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230524004537.18614-2-inwardvessel@gmail.com
|
|
Add support for byte-order in struct members in the genetlink-legacy
spec.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a dict of predefined Struct() objects to decode scalar types in native,
big or little endian format. This removes the repetitive code for the
scalar variants and ensures all the signed variants are supported.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the rename of the stacktrace field to common_stacktrace, update the
selftests to reflect this change. Copy the current selftest to test the
backward compatibility "stacktrace" keyword. Also the "requires" of that
test was incorrect, so it would never actually ran before. That is fixed
now.
Link: https://lore.kernel.org/linux-trace-kernel/20230523225402.55951f2f@rorschach.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add a selftest demonstrating using detach-mounted BPF FS using new mount
APIs, and pinning and getting BPF map using such mount. This
demonstrates how something like container manager could setup BPF FS,
pin and adjust all the necessary objects in it, all before exposing BPF
FS to a particular mount namespace.
Also add a few subtests validating all meaningful combinations of
path_fd and pathname. We use mounted /sys/fs/bpf location for these.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-5-andrii@kernel.org
|
|
Add path_fd support for bpf_obj_pin() and bpf_obj_get() operations
(through their opts-based variants). This allows to take advantage of
new kernel-side support for O_PATH-based pin/get location specification.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
|
|
Current UAPI of BPF_OBJ_PIN and BPF_OBJ_GET commands of bpf() syscall
forces users to specify pinning location as a string-based absolute or
relative (to current working directory) path. This has various
implications related to security (e.g., symlink-based attacks), forces
BPF FS to be exposed in the file system, which can cause races with
other applications.
One of the feedbacks we got from folks working with containers heavily
was that inability to use purely FD-based location specification was an
unfortunate limitation and hindrance for BPF_OBJ_PIN and BPF_OBJ_GET
commands. This patch closes this oversight, adding path_fd field to
BPF_OBJ_PIN and BPF_OBJ_GET UAPI, following conventions established by
*at() syscalls for dirfd + pathname combinations.
This now allows interesting possibilities like working with detached BPF
FS mount (e.g., to perform multiple pinnings without running a risk of
someone interfering with them), and generally making pinning/getting
more secure and not prone to any races and/or security attacks.
This is demonstrated by a selftest added in subsequent patch that takes
advantage of new mount APIs (fsopen, fsconfig, fsmount) to demonstrate
creating detached BPF FS mount, pinning, and then getting BPF map out of
it, all while never exposing this private instance of BPF FS to outside
worlds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20230523170013.728457-4-andrii@kernel.org
|
|
Bump libbpf.map to v1.3.0 to start a new libbpf version cycle.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230523170013.728457-3-andrii@kernel.org
|
|
Add ability to specify a network interface used to resolve XDP hints
kfuncs when loading program through bpftool.
Usage:
bpftool prog load [...] xdpmeta_dev <ifname>
Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable
mistake that results in not very descriptive errors,
so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated,
followed by 'bpftool map create [...] dev <ifname>' for consistency.
Now, to offload program, execute:
bpftool prog load [...] offload_dev <ifname>
To offload map:
bpftool map create [...] offload_dev <ifname>
'dev <ifname>' still performs offloading in the commands above, but now
triggers a warning and is excluded from bash completion.
'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because
'xdpmeta_dev' basically makes a program device-bound without loading it
onto the said device. For now, offloaded programs cannot use XDP hints [0],
but if this changes, using 'offload_dev <ifname>' should cover this case.
[0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com
|
|
Introduce selftests to check xdp_feature support for bond driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jussi Maki <joamaki@gmail.com>
Link: https://lore.kernel.org/bpf/64cb8f20e6491f5b971f8d3129335093c359aad7.1684329998.git.lorenzo@kernel.org
|
|
With a relatively recent clang (7090c10273119) and with this commit
to fix warnings in selftests (c8ed668593972) that uses __sink(err)
to resolve unused variables. We get the following verifier error.
root@6e731a24b33a:/host/tools/testing/selftests/bpf# ./test_sockmap
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --
libbpf: prog 'bpf_sockmap': failed to load: -13
libbpf: failed to load object 'test_sockmap_kern.bpf.o'
load_bpf_file: (-1) No such file or directory
ERROR: (-1) load bpf failed
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --
libbpf: prog 'bpf_sockmap': failed to load: -13
libbpf: failed to load object 'test_sockhash_kern.bpf.o'
load_bpf_file: (-1) No such file or directory
ERROR: (-1) load bpf failed
libbpf: prog 'bpf_sockmap': BPF program load failed: Permission denied
libbpf: prog 'bpf_sockmap': -- BEGIN PROG LOAD LOG --
0: R1=ctx(off=0,imm=0) R10=fp0
; op = (int) skops->op;
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; switch (op) {
1: (16) if w2 == 0x4 goto pc+5 ; R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
2: (56) if w2 != 0x5 goto pc+15 ; R2_w=5
; lport = skops->local_port;
3: (61) r2 = *(u32 *)(r1 +68) ; R1=ctx(off=0,imm=0) R2_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff))
; if (lport == 10000) {
4: (56) if w2 != 0x2710 goto pc+13 18: R1=ctx(off=0,imm=0) R2=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
; __sink(err);
18: (bc) w1 = w0
R0 !read_ok
processed 18 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
-- END PROG LOAD LOG --
To fix simply remove the err value because its not actually used anywhere
in the testing. We can investigate the root cause later. Future patch should
probably actually test the err value as well. Although if the map updates
fail they will get caught eventually by userspace.
Fixes: c8ed668593972 ("selftests/bpf: fix lots of silly mistakes pointed out by compiler")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-15-john.fastabend@gmail.com
|
|
When BPF program drops pkts the sockmap logic 'eats' the packet and
updates copied_seq. In the PASS case where the sk_buff is accepted
we update copied_seq from recvmsg path so we need a new test to
handle the drop case.
Original patch series broke this resulting in
test_sockmap_skb_verdict_fionread:PASS:ioctl(FIONREAD) error 0 nsec
test_sockmap_skb_verdict_fionread:FAIL:ioctl(FIONREAD) unexpected ioctl(FIONREAD): actual 1503041772 != expected 256
After updated patch with fix.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-14-john.fastabend@gmail.com
|
|
A bug was reported where ioctl(FIONREAD) returned zero even though the
socket with a SK_SKB verdict program attached had bytes in the msg
queue. The result is programs may hang or more likely try to recover,
but use suboptimal buffer sizes.
Add a test to check that ioctl(FIONREAD) returns the correct number of
bytes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-13-john.fastabend@gmail.com
|
|
When session gracefully shutdowns epoll needs to wake up and any recv()
readers should return 0 not the -EAGAIN they previously returned.
Note we use epoll instead of select to test the epoll wake on shutdown
event as well.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-12-john.fastabend@gmail.com
|
|
A common operation for testing is to spin up a pair of sockets that are
connected. Then we can use these to run specific tests that need to
send data, check BPF programs and so on.
The sockmap_listen programs already have this logic lets move it into
the new sockmap_helpers header file for general use.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-11-john.fastabend@gmail.com
|
|
No functional change here we merely pull the helpers in sockmap_listen.c
into a header file so we can use these in other programs. The tests we
are about to add aren't really _listen tests so doesn't make sense
to add them here.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-10-john.fastabend@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't
available
- Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf
'runqueue' type verification. This feature is built only with
BUILD_BPF_SKEL=1
- Make vmlinux.h use bpf.h and perf_event.h in source directory, not
system ones that may be old and not have things like 'union
perf_sample_weight'
- Add system include paths to BPF builds to pick things missing in the
headers included by clang -target bpf
- Update various header copies with the kernel sources
- Change divide by zero and not supported events behavior to show
'nan'/'not counted' in 'perf stat' output.
This happens when using things like 'perf stat -M TopdownL2 true',
involving JSON metrics
- Update no event/metric expectations affected by using JSON metrics in
'perf stat -ddd' perf test
- Avoid segv with 'perf stat --topdown' for metrics without a group
- Do not assume which events may have a PMU name, allowing the logic to
keep an AUX event group together. Makes this usecase work again:
$ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.078 MB perf.data ]
$ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0
sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown]
sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown]
sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0
sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown]
- Add a check for the above use case in 'perf test test_intel_pt'
- Fix build with refcount checking on arm64, it was still accessing
fields that need to be wrapped so that the refcounted struct gets
checked
- Fix contextid validation in ARM's CS-ETM, so that older kernels
without that field can still be supported
- Skip unsupported aggregation for stat events found in perf.data files
in 'perf script'
- Add stat test for record and script to check the previous problem
- Remove needless debuginfod queries from 'perf test java symbol', this
was just making the test take a long time to complete
- Address python SafeConfigParser() deprecation warning in 'perf test
attr'
- Fix __NR_execve undeclared on i386 'perf bench syscall' build error
* tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits)
perf bench syscall: Fix __NR_execve undeclared build error
perf test attr: Fix python SafeConfigParser() deprecation warning
perf test attr: Update no event/metric expectations
tools headers disabled-features: Sync with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Avoid segv with --topdown for metrics without a group
perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification
perf cs-etm: Fix contextid validation
perf arm64: Fix build with refcount checking
perf test: Add stat test for record and script
perf script: Skip aggregation for stat events
perf build: Add system include paths to BPF builds
perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory
perf parse-events: Do not break up AUX event group
perf test test_intel_pt.sh: Test sample mode with event with PMU name
perf evsel: Modify group pmu name for software events
...
|
