summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2017-01-19tools/virtio/ringtest: tweaks for s390Halil Pasic
Make ringtest work on s390 too. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19tools/virtio/ringtest: fix run-on-all.sh for offline cpusHalil Pasic
Since ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") run-on-all.sh uses seq 0 $HOST_AFFINITY as the list of ids of the CPUs to run the command on (assuming ids of online CPUs are consecutive and start from 0), where $HOST_AFFINITY is the highest CPU id in the system previously determined using lscpu. This can fail on systems with offline CPUs. Instead let's use lscpu to determine the list of online CPUs. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Fixes: ef1b144d ("tools/virtio/ringtest: fix run-on-all.sh to work without /dev/cpu") Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19selftest: cpufreq: Add special testsViresh Kumar
This patch adds support for special tests which were reported on the PM list over the years, which helped catching core bugs by several developers. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftest: cpufreq: Add support to test cpufreq modulesViresh Kumar
This patch adds support for cpufreq modules like cpufreq drivers and cpufreq governors. The tests will insert the modules in different orders and them perform basic cpufreq tests. The modules are then removed from the kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftest: cpufreq: Add suspend/resume/hibernate supportViresh Kumar
This patch adds support to test basic suspend/resume and hibernation to the cpufreq selftests. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftest: cpufreq: Add support for cpufreq testsViresh Kumar
This patch adds supports for basic cpufreq tests, which can be performed independent of any platform. It does basic tests for now, like - reading all cpufreq files - trying to update them - switching frequencies - switching governors This can be extended to have more specific tests later on. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftests: Add intel_pstate to TARGETSStafford Horne
This test was missing from the TARGETS list. The test requires patches to cpupower to pass correctly. Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftests/intel_pstate: Update makefile to match new styleStafford Horne
Recent changes from Bamvor (88baa78d1f318) have standardized the variable names like TEST_GEN_FILES and removed the need for make targets all and clean. These changes bring the intel_pstate test inline with those changes. Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftests/intel_pstate: Fix warning on loop index overflowStafford Horne
The build was showing the warning: aperf.c:60:27: warning: iteration 2147483647 invokes undefined behavior [-Waggressive-loop-optimizations] for (i=0; i<0x8fffffff; i++) { This change sets i, cpu and fd to unsigned int as they should not need to be signed. Cc: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19cpupower: Restore format of frequency-info limitStafford Horne
The intel_pstate kselftest expects that the output of `cpupower frequency-info -l | tail -1 | awk ' { print $1 } '` to get frequency limits. This does not work after the following two changes. - 562e5f1a3: rework the "cpupower frequency-info" command (Jacob Tanenbaum) removed parsable limit output - ce512b840: Do not analyse offlined cpus (Thomas Renninger) added newline to break limit parsing more This change preserves human readable output if wanted as well as parsable output for scripts/tests. Cc: Thomas Renninger <trenn@suse.com> Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftests/futex: Add headers to makefile dependenciesStafford Horne
The futex makefile did not contain dependencies for all headers, so if we make changes to logging.h rebuild will not happen. Add headers to fix it up. Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19selftests/futex: Add stdio used for loggingStafford Horne
Fix missing printf compile warnings. Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-01-19Merge tag 'iio-for-4.11a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new device support, features and cleanups for IIO in the 4.11 cycle. It's shaping to be another fairly busy cycle. Lots more on the way! New device support * ads7950 - new driver supporting ads7950, ads7951, ads7952, ads7953, ads7954, ads7955, ads7956, ads7957, ads7958, ads7959, ads7960, and ads7961 ADCs. * cm3605 - New driver for this light sensor and proximity sensor which is an analog part with some additional digital controls. * hx711 - New driver. Core new stuff * Gravity sensor type. This is a processed datastream in which the device will try to work out which way is down. * Split the buffer.h file into two parts. One provides the interface to 'use' a buffer, the second provides the internals of the buffer functionality as needed by implementations of buffers. - Move documentation inline so as to allow use of private: tag when generating documentation. - Add some utility functions for the few things that are directly done with the buffers. - Stop exporting functions that no-one uses outside of the core code. - Push docs down by the code in the c file where they should have always been. - Fix typo in kernel-doc for buffer. - push down some includes that were previously happening implicitly. - stop enabling the timestamp of the dummy device. Features and cleanups * ad5592r - ACPI support * ad5593r -ACPI support. * ad5933 - Fix a false comment about size of a particular register. * ad7150 - replace S_IRUGO | S_IWUSR with 0644. I'm not that keen on these patches in general, but as it was nicely presented I took this one anyway. As a general rule will only take these as part of a larger driver cleanup. - don't eat an error but rather reutnr it in the write_event_config callback. * ad7606 - replace non standard range attibute with _scale * ade7753 - use usleep_range for short sleeps * ade7754 - use usleep_range for short sleeps * ade7758 - use usleep_range for short sleeps * ade7759 - use usleep_range for short sleeps * ade7854 - use usleep_range for short sleeps * adis16201 - fix description * adis16203 - fix description - fix copyright year * adis16209 - fix description * adt7316 - Add braces to arms of if else statement (for consistency) - Alignment fixes. * axp288 - Fix up an issue with accidental overwrites of data. * bmi160 - add deivce tables for i2c and spi to support correctly identifying the full dt name (including manufacturer). - device tree binding. * bmp280 - use usleep_range for short sleeps. * cm3232 - return error from cm3232_reg_init rather than eating it if the last write fails. * dummy driver - remove a semicolor found at end of a function defintition. * exynos-adc - use usleep_range for short sleeps. * hid-sensor (accel) - Add timestamp support. The hardware can provide timestamps so lets support them. If not fall back to timestamps estimated in kernel. * hid-sensor (light) - Add a duplicate ID for the light channels so as to keep existing interface whilst also using the more standard IIO interface. * hts221 - acpi probing * imx25-gcq - Add a macro call to allow this driver to be automatically loaded. * isl29028 - reorganise code to avoid deep nesting of if statements. - move chip test and default regs into a function suitable or sharing with power management code. - tidy up some code alignment. * lidar-lite-v3 - introduce compatible strings that make it clear Garmin have consideral friends. * mma8452 - avoid returning signed value when unsigned is appropriate * spmi-vadc - Update function for generic voltage conversion to take into account that different channels on this device should be handled differently. - Rework code to allow per channel voltage scaling and support the standard options for this hardware. - Fixup three minor issues with the above patches for this part. These all effect test builds rather than the native builds for the part, but good to clean them up anyway. * st_sensors - support device matching from the ACPI DST tables. - acpi based probing for accelerometers - acpi based probing for pressure sensors - Allow pressure sensors to read negative values. - Export sampling frequency for lps25h and lps331ap. - Add support for the old DT bindings from the period when these deivces were often supported through windows. Docs fixup: * typo in sysfs-bus-iio
2017-01-19objtool: Fix IRET's opcodeJiri Slaby
The IRET opcode is 0xcf according to the Intel manual and also to objdump of my vmlinux: 1ea8: 48 cf iretq Fix the opcode in arch_decode_instruction(). The previous value (0xc5) seems to correspond to LDS. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170118132921.19319-1-jslaby@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-18perf unwind: Fix looking up dwarf unwind stack infoMatija Glavinic Pecotic
Using perf with call graph method dwarf fails to provide backtrace support for stripped binary even though .gnu_debuglink points to *.dbg flavor with properly populated debug symbols. Problem is reproduced on ARM (v7, v8), kernels 3.14.y, 4.4.y and 4.10.rc3. Perf is configured with libunwind, and unwind dwarf support [1]. Test code (stress_bt.c) can be found on [2]. Running (explicitly disable other unwinding methods): $ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \ -fno-asynchronous-unwind-tables stress_bt.c $ perf record -N --call-graph dwarf ./stress_bt $ perf report results in properly generated call graph. Stripping the binary and running it results with missing call graph. Expected result is to have call graph: $ gcc -g -o stress_bt -fomit-frame-pointer -fno-unwind-tables \ -fno-asynchronous-unwind-tables stress_bt.c $ objcopy --only-keep-debug stress_bt stress_bt.dbg $ objcopy --strip-debug stress_bt $ objcopy --add-gnu-debuglink=stress_bt.dbg stress_bt $ perf record -N --call-graph dwarf ./stress_bt $ perf report Problem is that perf doesn't try to read symbols pointed by gnu debuglink. Patch adds checking, and reading of the symbols from debuglink and symsrc. Order of the check is to first check within dso, then check whether symsrc is defined and try to read from it. Finally, debuglink is checked. Default locations of debug files are discussed in [3] and [4]. Comments on RFC are on [5]. [1] https://wiki.linaro.org/LEG/Engineering/TOOLS/perf-callstack-unwinding [2] [1]#Backtrace_stress_application [3] https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html [4] https://sourceware.org/binutils/docs/binutils/objcopy.html [5] https://lkml.org/lkml/2016/8/22/473 Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/d309d40a-463f-482b-68e1-1465326efdc1@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-18selftest/powerpc: Wrong PMC initialized in pmc56_overflow testMadhavan Srinivasan
Test uses PMC2 to count the event. But PMC1 is being initialized. Patch to fix it. Fixes: 3752e453f6ba ('selftests/powerpc: Add tests of PMU EBBs') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-17bpf: Fix test_lru_sanity5() in test_lru_map.cMartin KaFai Lau
test_lru_sanity5() fails when the number of online cpus is fewer than the number of possible cpus. It can be reproduced with qemu by using cmd args "--smp cpus=2,maxcpus=8". The problem is the loop in test_lru_sanity5() is testing 'i' which is incorrect. This patch: 1. Make sched_next_online() always return -1 if it cannot find a next cpu to schedule the process. 2. In test_lru_sanity5(), the parent process does sched_setaffinity() first (through sched_next_online()) and the forked process will inherit it according to the 'man sched_setaffinity'. Fixes: 5db58faf989f ("bpf: Add tests for the LRU bpf_htab") Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-17Merge tag 'perf-urgent-for-mingo-4.10-20170117' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull 'perf probe' fixes from Arnaldo Carvalho de Melo <acme@redhat.com> - Show correct locations for 'perf probe' on modules (Masami Hiramatsu) - Correctly handle 'perf probe's on GCC generated functions in modules (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-17perf evlist: Fix typo in deliver_sample()Soramichi AKIYAMA
This patch fixes a typo: s/delievery/delivery/ Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170117222233.dfd92de0ad701e7c53396950@m.soramichi.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17perf tools: Move two variables usied in libperf from perf.cSoramichi AKIYAMA
The use_browser and perf_version_string variables are both declared in perf.c but they are also referenced by other functions of libperf.a. Therefore a user linking an own main() with libperf.a must declare those two variables in their files even if the files never use the browser or the version information. This patch fixes this issue by moving use_browser and perf_version_string out of perf.c to some other files. Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170117002237.c1aec0ce3b4d675dca018deb@m.soramichi.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17perf sched timehist: Show total wait times for summaryNamhyung Kim
When --state option is given, the summary will show total run, sleep, iowait, preempt and delay time instead of statistics of runtime. $ perf sched timehist -s --state Wait-time summary comm parent sched-in run-time sleep iowait preempt delay (count) (msec) (msec) (msec) (msec) (msec) --------------------------------------------------------------------- systemd[1] 0 3 0.497 1.685 0.000 0.000 0.061 ksoftirqd/0[3] 2 21 0.434 989.948 0.000 0.000 0.325 rcu_preempt[7] 2 28 0.386 993.211 0.000 0.000 0.712 migration/0[10] 2 12 0.126 50.174 0.000 0.000 0.044 watchdog/0[11] 2 1 0.009 0.000 0.000 0.000 0.016 migration/1[13] 2 2 0.029 11.755 0.000 0.000 0.007 <SNIP> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170113104523.31212-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17perf sched timehist: Add --state optionNamhyung Kim
The --state option is to show task state when switched out. The state is printed as a single character like in the /proc but I added 'I' for idle state rather than 'R'. $ perf sched timehist --state | head Samples do not have callchains. time cpu task name wait time sch delay run time state [tid/pid] (msec) (msec) (msec) -------- --- ----------------------- -------- ------------------ ----- 1.753791 [3] <idle> 0.000 0.000 0.000 I 1.753834 [1] perf[27469] 0.000 0.000 0.000 S 1.753904 [3] perf[27470] 0.000 0.006 0.112 S 1.753914 [1] <idle> 0.000 0.000 0.079 I 1.753915 [3] migration/3[23] 0.000 0.002 0.011 S 1.754287 [2] <idle> 0.000 0.000 0.000 I 1.754335 [2] transmission[1773/1739] 0.000 0.004 0.047 S Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170113104523.31212-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-17perf sched timehist: Account thread wait time separatelyNamhyung Kim
Separate thread wait time into 3 parts - sleep, iowait and preempt based on the prev_state of the last event. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170113104523.31212-1-namhyung@kernel.org [ Fix the build on centos:5 where 'wait' shadows a global declaration ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16x86/cpufeature: Add AVX512_VPOPCNTDQ featurePiotr Luc
Vector population count instructions for dwords and qwords are going to be available in future Intel Xeon & Xeon Phi processors. Bit 14 of CPUID[level:0x07, ECX] indicates that the instructions are supported by a processor. The specification can be found in the Intel Software Developer Manual (SDM) and in the Instruction Set Extensions Programming Reference (ISE). Populate the feature bit and clear it when xsave is disabled. Signed-off-by: Piotr Luc <piotr.luc@intel.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: Radim Krčmář <rkrcmar@redhat.com> Link: http://lkml.kernel.org/r/20170110173403.6010-2-piotr.luc@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-16perf probe: Fix to probe on gcc generated functions in modulesMasami Hiramatsu
Fix to probe on gcc generated functions on modules. Since probing on a module is based on its symbol name, it should be adjusted on actual symbols. E.g. without this fix, perf probe shows probe definition on non-exist symbol as below. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -F in_range* in_range.isra.12 $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range+0 With this fix, perf probe correctly shows a probe on gcc-generated symbol. $ perf probe -m build-x86_64/net/netfilter/nf_nat.ko -D in_range p:probe/in_range nf_nat:in_range.isra.12+0 This also fixes same problem on online module as below. $ perf probe -m i915 -D assert_plane p:probe/assert_plane i915:assert_plane.constprop.134+0 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411450673.9978.14905987549651656075.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Add error checks to offline probe post-processingMasami Hiramatsu
Add error check codes on post processing and improve it for offline probe events as: - post processing fails if no matched symbol found in map(-ENOENT) or strdup() failed(-ENOMEM). - Even if the symbol name is the same, it updates symbol address and offset. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411443738.9978.4617979132625405545.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf probe: Fix to show correct locations for events on modulesMasami Hiramatsu
Fix to show correct locations for events on modules by relocating given address instead of retrying after failure. This happens when the module text size is big enough, bigger than sh_addr, because the original code retries with given address + sh_addr if it failed to find CU DIE at the given address. Any address smaller than sh_addr always fails and it retries with the correct address, but addresses bigger than sh_addr will get a CU DIE which is on the given address (not adjusted by sh_addr). In my environment(x86-64), the sh_addr of ".text" section is 0x10030. Since i915 is a huge kernel module, we can see this issue as below. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | sort | head -n1 ffffffffc0270000 t i915_switcheroo_can_switch [i915] ffffffffc0270000 + 0x10030 = ffffffffc0280030, so we'll check symbols cross this boundary. $ grep "[Tt] .*\[i915\]" /proc/kallsyms | grep -B1 ^ffffffffc028\ | head -n 2 ffffffffc027ff80 t haswell_init_clock_gating [i915] ffffffffc0280110 t valleyview_init_clock_gating [i915] So setup probes on both function and see what happen. $ sudo ./perf probe -m i915 -a haswell_init_clock_gating \ -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on i915_vga_set_decode:4@gpu/drm/i915/i915_drv.c in i915) As you can see, haswell_init_clock_gating is correctly shown, but valleyview_init_clock_gating is not. With this patch, both events are shown correctly. $ sudo ./perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) Committer notes: In my case: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on i915_getparam+432@gpu/drm/i915/i915_drv.c in i915) probe:valleyview_init_clock_gating (on __i915_printk+240@gpu/drm/i915/i915_drv.c in i915) # # readelf -SW /lib/modules/4.9.0+/build/vmlinux | egrep -w '.text|Name' [Nr] Name Type Address Off Size ES Flg Lk Inf Al [ 1] .text PROGBITS ffffffff81000000 200000 822fd3 00 AX 0 0 4096 # So both are b0rked, now with the fix: # perf probe -m i915 -a haswell_init_clock_gating -a valleyview_init_clock_gating Added new events: probe:haswell_init_clock_gating (on haswell_init_clock_gating in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating in i915) You can now use it in all perf tools, such as: perf record -e probe:valleyview_init_clock_gating -aR sleep 1 # perf probe -l probe:haswell_init_clock_gating (on haswell_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) probe:valleyview_init_clock_gating (on valleyview_init_clock_gating@gpu/drm/i915/intel_pm.c in i915) # Both looks correct. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/148411436777.9978.1440275861947194930.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf script: Also allow forcing reading of non-root owned files by rootYannick Brosseau
In 2059fc7a5a9e ("perf symbols: Allow forcing reading of non-root owned files by root") 'perf report' was added the option of forcing reading of non-root owned symbol file. This add the same behavior for perf script. Reported-by: Mark Drayton <mbd@fb.com> Signed-off-by: Yannick Brosseau <scientist@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20170113182527.18625-1-scientist@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf script: Fix man page about --dump-raw-trace optionMichael Petlan
The "--dump-raw-script" is not a valid option, replace it with the valid one, "--dump-raw-trace" Signed-off-by: Michael Petlan <mpetlan@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 133dc4c39c57 ("perf: Rename 'perf trace' to 'perf script'") LPU-Reference: 728644547.14560155.1484320012612.JavaMail.zimbra@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16tools lib subcmd: Fix missing member nameSoramichi AKIYAMA
This patch adds missing member names to struct initializations. Although in C99 for struct S {int x, int y} two init codes struct S s = {.x = (a), (b)} and struct S s = {.x = (a), .y = (b)} are the same, it is better to explicitly write .y (.argh in this patch) for readability and robustness against language/compiler evolutions. Signed-off-by: Soramichi Akiyama <akiyama@m.soramichi.jp> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20170113215623.32fb1ac2d862af0048c30fe6@m.soramichi.jp Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf tools: Remove unneccessary feature-dwarf warningDavid Carrillo-Cisneros
Don't warn for feature-dwarf==0 if user explicitily disabled DWARF by using NO_DWARF=1. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20170112210159.76143-1-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16perf pmu: Factor out scale conversion codeAndi Kleen
Move the scale factor parsing code to an own function to reuse it in an upcoming patch. v2: Return error in case strdup returns NULL. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170103150833.6694-2-andi@firstfloor.org [ Keep returning -ENOMEM when strdup() fails in perf_pmu__parse_scale()/convert_scale() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-16Merge 4.10-rc4 into driver-core-nextGreg Kroah-Hartman
We want the sysfs file revert and other fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-16Merge 4.10-rc4 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here to make merges easier/possible with the other sub-maintainer USB trees. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
2017-01-14torture: Enable DEBUG_OBJECTS_RCU_HEAD for Tiny RCUPaul E. McKenney
The RCU torture tests currently do not run any Tiny RCU scenarios for CONFIG_DEBUG_OBJECTS_RCU_HEAD=y. This is a hole in the test, given that someone might need this in real life and given that Tiny RCU uses different callback-handling code than does Tree RCU. This commit therefore enables this Kconfig option for scenario TINY02. Reported-by: "Ahmed, Iftekhar" <ahmedi@oregonstate.edu> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Update RCU test scenario documentationPaul E. McKenney
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Run a couple scenarios with CONFIG_RCU_EQS_DEBUGPaul E. McKenney
This commit runs TREE04 and TREE08 with CONFIG_RCU_EQS_DEBUG=y, enabling dyntick-counter checking on those two tests. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Run one test with DEBUG_LOCK_ALLOC but not PROVE_LOCKINGPaul E. McKenney
This commit sets CONFIG_DEBUG_LOCK_ALLOC but not CONFIG_PROVE_LOCKING for TREE08 in order to have at least one test with this configuration. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Run at least one test with CONFIG_DEBUG_OBJECTS_RCU_HEADPaul E. McKenney
This commit enables the CONFIG_DEBUG_OBJECTS_RCU_HEAD Kconfig option in TREE02 in order to do at least some testing with this enabled. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Add tests without slow grace period setup/cleanupPaul E. McKenney
This commit moves CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP, CONFIG_RCU_TORTURE_TEST_SLOW_INIT, and CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT from CFcommon to all of the TREE scenarios other than TREE08 and TREE09 in order to do at least some testing without these Kconfig options set. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Add CONFIG_PROVE_RCU_REPEATEDLY=y for TINY02Paul E. McKenney
This commit adds CONFIG_PROVE_RCU_REPEATEDLY=y, which has been untested for quite some time. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14torture: Add a check for CONFIG_RCU_STALL_COMMON for TINY01Paul E. McKenney
This commit verifies coverage of testing with CONFIG_RCU_STALL_COMMON=n. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2017-01-14locking/ww_mutex: Add ww_mutex to tools/testing/selftestsChris Wilson
Add the minimal test running (modprobe test-ww_mutex) to the kselftests CI framework. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161201114711.28697-9-chris@chris-wilson.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-14locking/ww_mutex: Add ww_mutex to locktorture testChris Wilson
Although ww_mutexes degenerate into mutexes, it would be useful to torture the deadlock handling between multiple ww_mutexes in addition to torturing the regular mutexes. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Nicolai Hähnle <nhaehnle@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161201114711.28697-3-chris@chris-wilson.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-12tools: psock_lib: harden socket filter used by psock testsSowmini Varadhan
The filter added by sock_setfilter is intended to only permit packets matching the pattern set up by create_payload(), but we only check the ip_len, and a single test-character in the IP packet to ensure this condition. Harden the filter by adding additional constraints so that we only permit UDP/IPv4 packets that meet the ip_len and test-character requirements. Include the bpf_asm src as a comment, in case this needs to be enhanced in the future Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12bpf: allow b/h/w/dw access for bpf's cb in ctxDaniel Borkmann
When structs are used to store temporary state in cb[] buffer that is used with programs and among tail calls, then the generated code will not always access the buffer in bpf_w chunks. We can ease programming of it and let this act more natural by allowing for aligned b/h/w/dw sized access for cb[] ctx member. Various test cases are attached as well for the selftest suite. Potentially, this can also be reused for other program types to pass data around. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11tools: Sync x86's vmx.h with the kernelArnaldo Carvalho de Melo
To pick the changes from: 1b07304c587d ("KVM: nVMX: support descriptor table exits") That adds entries to VMX_EXIT_REASONS, that is used by tools/perf/arch/x86/util/kvm-stat.c. This also picks the changes in: 1dc35dacc16b ("KVM: nVMX: check host CR3 on vmentry and vmexit") But these are not used in 'perf kvm stat', do it just to silence the kernel/tools file cache coherency detector: $ make -C tools/perf make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ladi Prosek <lprosek@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-56uowkk8t5zje49a42asffcy@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-11perf record: Add switch-output time option argumentJiri Olsa
It's now possible to specify the threshold time for perf.data like: $ perf record --switch-output=30s ... Once it's reached, the current data are dumped in to the perf.data.<timestamp> file and session does on. $ perf record --switch-output=30s ... [ perf record: dump data: Woken up 44 times ] [ perf record: Dump perf.data.2017010213043746 ] ... The time is expected to be a number with appended unit character - s/m/h/d. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Wang Nan <wangnan0@huawei.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1483955520-29063-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-07-18 21:10:42 +0000