| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
|
It should be invalid to delete an rss context while it is being
referenced from an ntuple filter. ethtool core should prevent this
from happening. This patch adds a testcase to verify this behavior.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- More issues reported in the enable/disable paths on large machines
with many tasks due to scx_tasks_lock being held too long. Break up
the task iterations
- Remove ops.select_cpu() dependency in bypass mode so that a
misbehaving implementation can't live-lock the machine by pushing all
tasks to few CPUs in bypass mode
- Other misc fixes
* tag 'sched_ext-for-6.12-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove unnecessary cpu_relax()
sched_ext: Don't hold scx_tasks_lock for too long
sched_ext: Move scx_tasks_lock handling into scx_task_iter helpers
sched_ext: bypass mode shouldn't depend on ops.select_cpu()
sched_ext: Move scx_buildin_idle_enabled check to scx_bpf_select_cpu_dfl()
sched_ext: Start schedulers with consistent p->scx.slice values
Revert "sched_ext: Use shorter slice while bypassing"
sched_ext: use correct function name in pick_task_scx() warning message
selftests: sched_ext: Add sched_ext as proper selftest target
|
|
Explicitly verify that MPC connection attempts towards a port-based
signal endpoint fail with a reset.
Note that this new test is a bit different from the other ones, not
using 'run_tests'. It is then needed to add the capture capability, and
the picking the right port which have been extracted into three new
helpers. The info about the capture can also be printed from a single
point, which simplifies the exit paths in do_transfer().
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-2-7faea8e6b6ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that validates that an unbound packet socket cannot create/join
a fanout group.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/7612fa90f613100e2b64c563cab3d7fdf36010db.1728802323.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify test_control_group to have toggle parameter.
When toggle is non-zero, loopback device will be set down for the
initialization of fd[1] which is still expected to successfully join
the fanout.
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/6f4a506ed5f08f8fc00a966dec8febd1030c6e98.1728802323.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-10-14
The following pull-request contains BPF updates for your *net-next* tree.
We've added 21 non-merge commits during the last 18 day(s) which contain
a total of 21 files changed, 1185 insertions(+), 127 deletions(-).
The main changes are:
1) Put xsk sockets on a struct diet and add various cleanups. Overall, this helps
to bump performance by 12% for some workloads, from Maciej Fijalkowski.
2) Extend BPF selftests to increase coverage of XDP features in combination
with BPF cpumap, from Alexis Lothoré (eBPF Foundation).
3) Extend netkit with an option to delegate skb->{mark,priority} scrubbing to
its BPF program, from Daniel Borkmann.
4) Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs,
from Mahe Tardy.
5) Extend BPF selftests covering a BPF program setting socket options per MPTCP
subflow, from Geliang Tang and Nicolas Rybowski.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (21 commits)
xsk: Use xsk_buff_pool directly for cq functions
xsk: Wrap duplicated code to function
xsk: Carry a copy of xdp_zc_max_segs within xsk_buff_pool
xsk: Get rid of xdp_buff_xsk::orig_addr
xsk: s/free_list_node/list_node/
xsk: Get rid of xdp_buff_xsk::xskb_list_node
selftests/bpf: check program redirect in xdp_cpumap_attach
selftests/bpf: make xdp_cpumap_attach keep redirect prog attached
selftests/bpf: fix bpf_map_redirect call for cpu map test
selftests/bpf: add tcx netns cookie tests
bpf: add get_netns_cookie helper to tc programs
selftests/bpf: add missing header include for htons
selftests/bpf: Extend netkit tests to validate skb meta data
tools: Sync if_link.h uapi tooling header
netkit: Add add netkit scrub support to rt_link.yaml
netkit: Simplify netkit mode over to use NLA_POLICY_MAX
netkit: Add option for scrubbing skb meta data
bpf: Remove unused macro
selftests/bpf: Add mptcp subflow subtest
selftests/bpf: Add getsockopt to inspect mptcp subflow
...
====================
Link: https://patch.msgid.link/20241014211110.16562-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
YNL specs can use string expressions for limits, like s32-min
or u16-max. We convert all of those into their numeric values
when generating the code, which isn't always helpful. Try to
retain the string representations in the output. Any sort of
calculations still need the integers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241010151248.2049755-1-kuba@kernel.org
[pabeni@redhat.com: regenerated netdev-genl-gen.c]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 1fd9e4f25782 ("selftests: make kselftest-clean remove libynl outputs")
added EXTRA_CLEAN of YNL generated files to ynl.mk. We already had
a EXTRA_CLEAN in the file including the snippet. Consolidate them.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Try to rebuild YNL if either user added a new family or the specs
of the families have changed. Stanislav's ncdevmem cause a false
positive build failure in NIPA because libynl.a isn't rebuilt
after ethtool is added to YNL_GENS.
Note that sha1sum is already used in other parts of the build system.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241011230311.2529760-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to set per-NAPI defer_hard_irqs and gro_flush_timeout.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-7-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping gro_flush_timeout for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241011184527.16393-5-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support dumping defer_hard_irqs for a NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20241011184527.16393-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
|
|
This fix solves this error, when calling kselftest with targets
"drivers/net":
File "tools/testing/selftests/net/lib/py/nsim.py", line 64, in __init__
if e.errno == errno.ENOSPC:
NameError: name 'errno' is not defined
The error was found by running tests manually with the command:
make kselftest TARGETS="drivers/net"
The module errno makes available standard error system symbols.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20241010183034.24739-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fix solves this error, when calling kselftest with targets "net/rds":
The error was found by running tests manually with the command:
make kselftest TARGETS="net/rds"
The patch also specifies to import ip() function from the utils module.
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20241010194421.48198-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b3ea416419c8 ("testing: net-drv: add basic shaper test")
removed the trailing backslash from the last entry. We have
a terminating comment here to avoid having to modify the last
line when adding at the end.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20241010211857.2193076-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by:
glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)")
Without this fix, rseq selftests for mm_cid fail:
./run_param_test.sh
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running mm_cid test spinlock
Error: cpu id getter unavailable
Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
CC: Carlos O'Donell <carlos@redhat.com>
CC: Florian Weimer <fweimer@redhat.com>
CC: linux-kselftest@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
xdp_cpumap_attach, in its current form, only checks that an xdp cpumap
program can be executed, but not that it performs correctly the cpu
redirect as configured by userspace (bpf_prog_test_run_opts will return
success even if the redirect program returns an error)
Add a check to ensure that the program performs the configured redirect
as well. The check is based on a global variable incremented by a
chained program executed only if the redirect program properly executes.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-3-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Current test only checks attach/detach on cpu map type program, and so
does not check that it can be properly executed, neither that it
redirects correctly.
Update the existing test to extend its coverage:
- keep the redirected program loaded
- try to execute it through bpf_prog_test_run_opts with some dummy
context
While at it, bring the following minor improvements:
- isolate test interface in its own namespace
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-2-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
xdp_redir_prog currently redirects packets based on the entry at index 1
in cpu_map, but the corresponding test only manipulates the entry at
index 0. This does not really affect the test in its current form since
the program is detached before having the opportunity to execute, but it
needs to be fixed before being able improve the corresponding test (ie,
not only test attach/detach but also the redirect feature)
Fix this XDP program by making it redirect packets based on entry 0 in
cpu_map instead of entry 1.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241009-convert_xdp_tests-v3-1-51cea913710c@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc3).
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- dsa: sja1105: fix reception from VLAN-unaware bridges
- Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is
enabled"
- eth: fec: don't save PTP state if PTP is unsupported
Current release - new code bugs:
- smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref
- eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop
- phy: aquantia: AQR115c fix up PMA capabilities
Previous releases - regressions:
- tcp: 3 fixes for retrans_stamp and undo logic
Previous releases - always broken:
- net: do not delay dst_entries_add() in dst_release()
- netfilter: restrict xtables extensions to families that are safe,
syzbot found a way to combine ebtables with extensions that are
never used by userspace tools
- sctp: ensure sk_state is set to CLOSED if hashing fails in
sctp_listen_start
- mptcp: handle consistently DSS corruption, and prevent corruption
due to large pmtu xmit"
* tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
MAINTAINERS: Add headers and mailing list to UDP section
MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL]
slip: make slhc_remember() more robust against malicious packets
net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC
ppp: fix ppp_async_encode() illegal access
docs: netdev: document guidance on cleanup patches
phonet: Handle error of rtnl_register_module().
mpls: Handle error of rtnl_register_module().
mctp: Handle error of rtnl_register_module().
bridge: Handle error of rtnl_register_module().
vxlan: Handle error of rtnl_register_module().
rtnetlink: Add bulk registration helpers for rtnetlink message handlers.
net: do not delay dst_entries_add() in dst_release()
mptcp: pm: do not remove closing subflows
mptcp: fallback when MPTCP opts are dropped after 1st data
tcp: fix mptcp DSS corruption due to large pmtu xmit
mptcp: handle consistently DSS corruption
net: netconsole: fix wrong warning
net: dsa: refuse cross-chip mirroring operations
net: fec: don't save PTP state if PTP is unsupported
...
|
|
Leverage a basic/dummy netdevsim implementation to do functional
coverage for NL interface.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/43092afbf38365c796088bf8fc155e523ab434ae.1728460186.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes, 5 of which are c:stable. All singletons, about half of
which are MM"
* tag 'mm-hotfixes-stable-2024-10-09-15-46' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: delete comments for "value" member of 'struct zswap_entry'.
CREDITS: sort alphabetically by name
secretmem: disable memfd_secret() if arch cannot set direct map
.mailmap: update Fangrui's email
mm/huge_memory: check pmd_special() only after pmd_present()
resource, kunit: fix user-after-free in resource_test_region_intersects()
fs/proc/kcore.c: allow translation of physical memory addresses
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
device-dax: correct pgoff align in dax_set_mapping()
kthread: unpark only parked kthread
Revert "mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN"
bcachefs: do not use PF_MEMALLOC_NORECLAIM
|
|
meta iifname veth0 ip daddr ... fib daddr oif
... is expected to return "dummy0" interface which is part of same vrf
as veth0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: David Vernet <void@manifault.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The RED test uses a pair of TBF shapers. The first to get predictably-sized
stream of traffic, and second to get a 100% saturated chokepoint. To this
chokepoint it injects individual packets. Because the chokepoint is
saturated, these additional packets go straight to the backlog. This allows
the test to check RED behavior across various queue sizes.
The shapers are rated at 1Gbps, for historical reasons (before mlxsw
supported TBF offload, the test used port speed to create the chokepoints).
Machines with a low-power CPU may have trouble consistently generating
1Gbps of traffic, and the test then spuriously fails.
Instead, drop the rate to 200Mbps (Spectrum has a guaranteed shaper rate
granularity of 200Mbps, so anything lower is not guaranteed to work well).
Because that means fewer packets will be mirrored in the ECN-mark test,
adjust the passing condition accordingly.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c6712f9c5de75ae0bc2ab3d8ea7d92aaaf93af95.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test works by injecting into a port with a maxed-out queue a couple
packets and checks if a corresponding number of packets were dropped. This
has worked well on Spectrum<4, but on Spectrum-4 it has been noisy. This
is in line with the observation that on Spectrum-4, queue size tends to
fluctuate more. A handful of packets could then still be accepted to the
queue even though it was nominally full just recently.
In order to accommodate this behavior, send many more packets. The buffer
can fit N extra packets, but not N% packets. This therefore allows us to
set wider absolute margins, while actually narrowing them relatively.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/abc869b9f6003d400d6293ddd5edb2f4517f44d5.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The qdisc stats are taken from the port's periodic HW stats, which are
updated once a second. We try to accommodate the latency by using busywait
in build_backlog().
The issue in that seems to be that when do_mark_test() builds the backlog,
it makes the decision whether to send more packets based on the first
instance of the queue depth stat exceeding the current value, when in fact
more traffic is on the way and the queue depth would increase further. This
leads to failures in TC 1 of mark-mirror test, where we see the following
failure:
TEST: TC 0: marked packets mirror'd [ OK ]
TEST: TC 1: marked packets mirror'd [FAIL]
Spurious packets (1680 -> 2290) observed without buffer pressure
Fix by waiting for the full second before reading the queue depth for the
first time, to make sure it reflects all in-flight traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/321dcf8b3e9a1f0766429c8cf3e3f1746f1bc375.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. In practice we can
sample queue depth values going from about -12% to about +7% of the
configured RED limit. The test which checks the queue size has a limit of
+-10%, and as a result often fails. We attempted to fix the issue by
busywaiting for several seconds hoping to get within the bounds, but that
still proved to be too noisy (or the wait time would be impractically
long). Unfortunately we have to bump the value tolerance from 10% to 15%,
which in this patch do.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/f54950df2a8fcba46c3ddc1053376352fa2e592b.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Backlog fluctuates on Spectrum-4 much more than on <4. Increasing the
desired backlog seems to help, as the constant fluctuations do not overlap
into the territory where packets are marked.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/0821fb3aa8bb6a6c0d3000baab04995517c9a0cc.1728316370.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- ops.enqueue() didn't have a way to tell whether select_task_rq_scx()
and thus ops.select() were skipped. Some schedulers were incorrectly
using SCX_ENQ_WAKEUP. Add SCX_ENQ_CPU_SELECTED and fix scx_qmap using
it.
- Remove a spurious WARN_ON_ONCE() in scx_cgroup_exit()
- Fix error information clobbering during load
- Add missing __weak markers to BPF helper declarations
- Doc update
* tag 'sched_ext-for-6.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Documentation: Update instructions for running example schedulers
sched_ext, scx_qmap: Add and use SCX_ENQ_CPU_SELECTED
sched/core: Add ENQUEUE_RQ_SELECTED to indicate whether ->select_task_rq() was called
sched/core: Make select_task_rq() take the pointer to wake_flags instead of value
sched_ext: scx_cgroup_exit() may be called without successful scx_cgroup_init()
sched_ext: Improve error reporting during loading
sched_ext: Add __weak markers to BPF helper function decalarations
|
|
Add netns cookie test that verifies the helper is now supported and work
in the context of tc programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20241007095958.97442-2-mahe.tardy@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU
traces
- Fix static build compilation error when libdw isn't installed or is
too old
- Add missing include when building with
!HAVE_DWARF_GETLOCATIONS_SUPPORT
- Add missing refcount put on 32-bit DSOs
- Fix disassembly of user space binaries by setting the binary_type of
DSO when loading
- Update headers with the kernel sources, including asound.h, sched.h,
fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's
cputype.h
* tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace
perf build: Fix build feature-dwarf_getlocations fail for old libdw
perf build: Fix static compilation error when libdw is not installed
perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf tools: Cope with differences for lib/list_sort.c copy from the kernel
tools check_headers.sh: Add check variant that excludes some hunks
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync the linux/in.h with the kernel sources
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools include UAPI: Sync linux/fcntl.h copy with the kernel sources
tools include UAPI: Sync linux/sched.h copy with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf vdso: Missed put on 32-bit dsos
perf symbol: Set binary_type of dso when loading
|
|
Including the network_helpers.h header in tests can lead to the following
build error:
./network_helpers.h: In function ‘csum_tcpudp_magic’:
./network_helpers.h:116:14: error: implicit declaration of function \
‘htons’ [-Werror=implicit-function-declaration]
116 | s += htons(proto + len);
The error is avoided in many cases thanks to some other headers included
earlier and bringing in arpa/inet.h (ie: test_progs.h).
Make sure that test_progs build success does not depend on header ordering
by adding the missing header include in network_helpers.h
Fixes: f6642de0c3e9 ("selftests/bpf: Add csum helpers")
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20241008-network_helpers_fix-v1-1-2c2ae03df7ef@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Starting with 6.12 commit 85585b4bc8d8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We only support a single check at a time for TypeBinary.
Refactor the code to cover 'exact-len' and make adding
new checks easier.
Link: https://lore.kernel.org/20241004063855.1a693dd1@kernel.org
Link: https://patch.msgid.link/20241007155311.1193382-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This executable is missing from the corresponding gitignore file.
Add msg_oob to the net gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-1-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a small netkit test to validate skb mark and priority under the
default scrubbing as well as with mark and priority scrubbing off.
# ./vmtest.sh -- ./test_progs -t netkit
[...]
./test_progs -t netkit
[ 1.419662] tsc: Refined TSC clocksource calibration: 3407.993 MHz
[ 1.420151] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcd52370, max_idle_ns: 440795242006 ns
[ 1.420897] clocksource: Switched to clocksource tsc
[ 1.447996] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.448447] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#357 tc_netkit_basic:OK
#358 tc_netkit_device:OK
#359 tc_netkit_multi_links:OK
#360 tc_netkit_multi_opts:OK
#361 tc_netkit_neigh_links:OK
#362 tc_netkit_pkt_type:OK
#363 tc_netkit_scrub:OK
Summary: 7/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20241004101335.117711-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
