| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
|
|
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Synthesize task events for pre-existing threads when using 'perf lock
--threads', as we need to show task names.
- Fix unwinding with ld.lld (>= version 10.0) linked objects, where
.eh_frame_hdr and .text are in different PT_LOAD program headers,
which makes perf record --call-graph dwarf fail with such obkects.
- Check if 'perf record' hangs in the ARM SPE (Statistical Profiling
Extensions) 'perf test' entry when recording a workload with forks.
- Trace physical address for Arm SPE events, needed for 'perf c2c' to
locate the memory node for samples.
- Fix sorting in percent_rmt_hitm_cmp() in 'perf c2c'.
- Further support for Intel hybrid systems in the evlist and 'perf
record' code.
- Update IBM s/390 vendor event JSON tables.
- Add metrics (JSON) for Intel Sapphirerapids.
- Update metrics for Intel Alderlake.
- Correct typo of sysf 'event_source' directory in the documentation.
* tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events intel: Update metrics for Alderlake
perf vendor events intel: Add metrics for Sapphirerapids
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
perf mem: Trace physical address for Arm SPE events
perf list: Update event description for IBM zEC12/zBC12 to latest level
perf list: Update event description for IBM z196/z114 to latest level
perf list: Update event description for IBM z15 to latest level
perf list: Update event description for IBM z14 to latest level
perf list: Update event description for IBM z13 to latest level
perf list: Update event description for IBM z10 to latest level
perf list: Add IBM z16 event description for s390
perf record: Support sample-read topdown metric group for hybrid platforms
perf lock: Change to synthesize task events
perf unwind: Fix segbase for ld.lld linked objects
perf test arm-spe: Check if perf-record hangs when recording workload with forks
perf docs: Correct typo of event_sources
perf evlist: Extend arch_evsel__must_be_in_group to support hybrid systems
|
|
As subject, we only test SKB mode for xdping at present.
Now add DRV mode for xdping.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220602032507.464453-1-liuhangbin@gmail.com
|
|
Move the correct definition from linker.c into libbpf_internal.h.
Fixes: 0087a681fa8c ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Reported-by: Yuze Chi <chiyuze@google.com>
Signed-off-by: Yuze Chi <chiyuze@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220603055156.2830463-1-irogers@google.com
|
|
tc_redirect_dtime was reported flaky from time to time. It
always fails at the udp test and complains about the bpf@tc-ingress
got a skb->tstamp when handling udp packet. It is unexpected
because the skb->tstamp should have been cleared when crossing
different netns.
The most likely cause is that the skb is actually a tcp packet
from the earlier tcp test. It could be the final TCP_FIN handling.
This patch tightens the skb->tstamp check in the bpf prog. It ensures
the skb is the current testing traffic. First, it checks that skb
matches the IPPROTO of the running test (i.e. tcp vs udp).
Second, it checks the server port (dst_ns_port). The server
port is unique for each test (50000 + test_enum).
Also fixed a typo in test_udp_dtime(): s/P100/P101/
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220601234050.2572671-1-kafai@fb.com
|
|
This change fixes a couple of typos that were encountered while studying
the source code.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220601154025.3295035-1-deso@posteo.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
https://mirrors.edge.kernel.org/pub/tools/crosstool/"
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
https://github.com/loongson/linux/tree/loongarch-next
https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next
Cross-compile tool chain to build kernel:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz
A CLFS-based Linux distro:
https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2
Open-source tool chain which is under review (Binutils and Gcc are already upstream):
https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2
Loongson and LoongArch documentations:
https://github.com/loongson/LoongArch-Documentation
LoongArch-specific interrupt controllers:
https://mantis.uefi.org/mantis/view.php?id=2203
https://mantis.uefi.org/mantis/view.php?id=2313"
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Most of issues addressed were introduced during this merging window.
- Initialise jump labels before setup_machine_fdt(), needed by commit
f5bda35fba61 ("random: use static branch for crng_ready()").
- Sparse warnings: missing prototype, incorrect __user annotation.
- Skip SVE kselftest if not sufficient vector lengths supported"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
arm64: Initialize jump labels before setup_machine_fdt()
arm64: hibernate: Fix syntax errors in comments
arm64: Remove the __user annotation for the restore_za_context() argument
ftrace/fgraph: fix increased missing-prototypes warnings
|
|
Update JSON metrics for Alderlake to perf.
It included both P-core and E-core metrics.
P-core metrics based on TMA 4.4 (TMA_Metrics-full.csv)
E-core metrics based on E-core TMA 2.0 (E-core_TMA_Metrics.csv)
https://download.01.org/perfmon/
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220528095933.1784141-2-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON metrics for Sapphirerapids to perf.
Based on TMA4.4 metrics.
https://download.01.org/perfmon/TMA_Metrics-full.csv
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220528095933.1784141-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The function percent_rmt_hitm_cmp() wrongly uses local HITMs for
sorting remote HITMs.
Since this function is to sort cache lines for remote HITMs, this patch
changes to use 'rmt_hitm' field for correct sorting.
Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, Arm SPE events don't trace physical address, therefore, the
field 'phys_addr' is always zero in synthesized memory samples. This
leads to perf c2c tool cannot locate the memory node for samples.
This patch enables configuration 'pa_enable' for Arm SPE events, so the
physical address packet can be traced, finally this can allow perf c2c
tool to locate properly for memory node.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20220530083645.253432-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Update IBM zEC12/zBC12 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-7-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z196/z114 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-6-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z15 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-5-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z14 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-4-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z13 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-3-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z10 event counter description to the latest level
as described in the documents
1. SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities."
released on May, 2022
for the following counter sets:
* Basic counter set
* Problem counter set
* Crypto counter set
2. SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022
for the following counter sets:
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-2-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
Update IBM z16 counter description using document SA23-2260-07:
"The Load-Program-Parameter and the CPU-Measurement Facilities"
released in May, 2022, to include counter definitions for IBM z16
counter sets:
* Basic counter set
* Problem/user counter set
* Crypto counter set
Use document SA23-2261-07:
"The CPU-Measurement Facility Extended Counters Definition
for z10, z196/z114, zEC12/zBC12, z13/z13s, z14, z15 and z16"
released on April 29, 2022 to include counter definitions for IBM z16
* Extended counter set
* MT-Diagnostic counter set
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220531092706.1931503-1-tmricht@linux.ibm.com
Cc: acme@kernel.org
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: svens@linux.ibm.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
With the hardware TopDown metrics feature, the sample-read feature should
be supported for a TopDown group, e.g., sample a non-topdown event and read
a Topdown metric group. But the current perf record code errors are out.
For a TopDown metric group,the slots event must be the leader of the group,
but the leader slots event doesn't support sampling. To support sample-read
the TopDown metric group, uses the 2nd event of the group as the "leader"
for the purposes of sampling.
Only the platform with the TopDown metric feature supports sample-read the
topdown group. In commit acb65150a47c ("perf record: Support sample-read
topdown metric group"), it adds arch_topdown_sample_read() to indicate
whether the TopDown group supports sample-read, it should only work on the
non-hybrid systems, this patch extends the support for hybrid platforms.
Before:
# ./perf record -e "{cpu_core/slots/,cpu_core/cycles/,cpu_core/topdown-retiring/}:S" -a sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_core/topdown-retiring/).
/bin/dmesg | grep -i perf may provide additional information.
After:
# ./perf record -e "{cpu_core/slots/,cpu_core/cycles/,cpu_core/topdown-retiring/}:S" -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.238 MB perf.data (369 samples) ]
Fixes: acb65150a47c2bae ("perf record: Support sample-read topdown metric group")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220602153603.1884710-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With -t/--threads option, it needs to display task names so synthesize
task related events at the beginning.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Fixes: 7c3bcbdf449f ("perf lock: Add -t/--thread option for report")
Link: http://lore.kernel.org/lkml/20220601065846.456965-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
segbase is the address of .eh_frame_hdr and table_data is segbase plus
the header size. find_proc_info computes segbase as `map->start +
segbase - map->pgoff` which is wrong when
* .eh_frame_hdr and .text are in different PT_LOAD program headers
* and their p_vaddr difference does not equal their p_offset difference
Since 10.0, ld.lld's default --rosegment -z noseparate-code layout has
such R and RX PT_LOAD program headers.
ld.lld (default) => perf report fails to unwind `perf record
--call-graph dwarf` recorded data
ld.lld --no-rosegment => ok (trivial, no R PT_LOAD)
ld.lld -z separate-code => ok but by luck: there are two PT_LOAD but
their p_vaddr difference equals p_offset difference
ld.bfd -z noseparate-code => ok (trivial, no R PT_LOAD)
ld.bfd -z separate-code (default for Linux/x86) => ok but by luck:
there are two PT_LOAD but their p_vaddr difference equals p_offset
difference
To fix the issue, compute segbase as dso's base address plus
PT_GNU_EH_FRAME's p_vaddr. The base address is computed by iterating
over all dso-associated maps and then subtract the first PT_LOAD p_vaddr
(the minimum guaranteed by generic ABI) from the minimum address.
In libunwind, find_proc_info transitively called by unw_step is cached,
so the iteration overhead is acceptable.
Reported-by: Sebastian Ullrich <sebasti@nullri.ch>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: llvm@lists.linux.dev
Link: https://github.com/ClangBuiltLinux/linux/issues/1646
Link: https://lore.kernel.org/r/20220527182039.673248-1-maskray@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add shell test to check if perf-record hangs when recording an arm_spe
event with forks.
The test FAILS if the Kernel is not patched with Commit 961c391217 ("perf:
Always wake the parent event").
Unpatched Kernel:
$ perf test -v 90
90: Check Arm SPE doesn't hang when there are forks
--- start ---
test child forked, pid 14232
Recording workload with fork
Log lines = 90 /tmp/__perf_test.stderr.0Nu0U
Log lines after 1 second = 90 /tmp/__perf_test.stderr.0Nu0U
SPE hang test: FAIL
test child finished with -1
---- end ----
Check Arm SPE trace data in workload with forks: FAILED!
Patched Kernel:
$ perf test -v 90
90: Check Arm SPE doesn't hang when there are forks
--- start ---
test child forked, pid 2930
Compiling test program...
Recording workload...
Log lines = 478 /tmp/__perf_test.log.026AI
Log lines after 1 second = 557 /tmp/__perf_test.log.026AI
SPE hang test: PASS
Cleaning up files...
test child finished with 0
---- end ----
Check Arm SPE trace data in workload with forks: Ok
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220228165655.3920-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The sysfs directory is called event_source.
Before:
$ ls -la /sys/bus/event_sources/devices/cpu/format/
ls: cannot access '/sys/bus/event_sources/devices/cpu/format/': No such file or directory
$
After:
$ ls -la /sys/bus/event_source/devices/cpu/format/
total 0
drwxr-xr-x. 2 root root 0 Jun 2 15:36 .
drwxr-xr-x. 6 root root 0 Jun 2 15:35 ..
-r--r--r--. 1 root root 4096 Jun 2 15:36 any
-r--r--r--. 1 root root 4096 Jun 2 15:36 cmask
-r--r--r--. 1 root root 4096 Jun 2 15:36 edge
-r--r--r--. 1 root root 4096 Jun 2 15:36 event
-r--r--r--. 1 root root 4096 Jun 2 15:36 frontend
-r--r--r--. 1 root root 4096 Jun 2 15:36 inv
-r--r--r--. 1 root root 4096 Jun 2 15:36 ldlat
-r--r--r--. 1 root root 4096 Jun 2 15:36 offcore_rsp
-r--r--r--. 1 root root 4096 Jun 2 15:36 pc
-r--r--r--. 1 root root 4096 Jun 2 15:36 umask
$
Reviewed-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Alyssa Ross <hi@alyssa.is>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joshua Martinez <joshuamart@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Like Xu <likexu@tencent.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220603045744.2815559-1-irogers@google.com
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For the hybrid system, the "slots" event changes to "cpu_core/slots/", need
extend API arch_evsel__must_be_in_group() to support hybrid systems.
In the origin code, for hybrid system event "cpu_core/slots/", the output
of the API arch_evsel__must_be_in_group() is "false" (in fact,it should be
"true"). Currently only one API evsel__remove_from_group() calls it. In
evsel__remove_from_group(), it adds the second condition to check, so the
output of evsel__remove_from_group() still is correct. That's the reason
why there isn't an instant error. I'd like to fix the issue found in API
arch_evsel__must_be_in_group() in case someone else using the function in
the other place.
Fixes: d98079c05b5a ("perf evlist: Keep topdown counters in weak group")
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20220601152544.1842447-1-zhengjun.xing@linux.intel.com
Cc: peterz@infradead.org
Cc: adrian.hunter@intel.com
Cc: alexander.shishkin@intel.com
Cc: acme@kernel.org
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Cc: mingo@redhat.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks"
* tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
selftests: alsa: Handle pkg-config failure more gracefully
ALSA: usb-audio: Optimize TEAC clock quirk
ASoC: da7219: cancel AAD related work earlier for jack removal
ASoC: da7219: Fix pole orientation detection on certain headsets
ASoC: Intel: avs: Fix build error on arc, m68k and sparc
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
ALSA: hda/via: Delete does not require return
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
ASoC: Intel: common: fix typo for tplg naming
ALSA: usb-audio: Cancel pending work at closing a MIDI substream
ALSA: usb-audio: Add mixer mapping for Gigabyte B450/550 Mobos
ASoC: rt5640: Do not manipulate pin "Platform Clock" if the "Platform Clock" is not in the DAPM
ASoC: SOF: amd: Fixed Build error
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
ASoC: soc-pcm: fix BE transition for TRIGGER_START
|
|
Both nodemask and bitmap routines had mixed return values that provided
potentially signed return values that could never happen. This was
leading to the compiler getting confusing about the range of possible
return values (it was thinking things could be negative where they could
not be). In preparation for fixing nodemask, fix all the bitmap routines
that should be returning unsigned (or bool) values.
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Christophe de Dinechin <dinechin@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Add some other common headers for basic LoongArch support.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
One strategy employed by libbpf to guess the pointer size is by finding
the size of "unsigned long" type. This is achieved by looking for a type
of with the expected name and checking its size.
Unfortunately, the C syntax is friendlier to humans than to computers
as there is some variety in how such a type can be named. Specifically,
gcc and clang do not use the same names for integer types in debug info:
- clang uses "unsigned long"
- gcc uses "long unsigned int"
Lookup all the names for such a type so that libbpf can hope to find the
information it wants.
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220524094447.332186-1-douglas.raillard@arm.com
|
|
bpf_object__btf() can return a NULL value. If bpf_object__btf returns
null, do not progress through codegen_asserts(). This avoids a null ptr
dereference at the call btf__type_cnt() in the function find_type_for_map()
Signed-off-by: Michael Mullin <masmullin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220523194917.igkgorco42537arb@jup
|
|
In the commit da00d2f117a0 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING"),
the bpf_fentry_test1 function was moved into bpf_prog_test_run_tracing(),
which is the test_run function of the tracing BPF programs.
Thus calling 'bpf_prog_test_run_opts(filter_fd, &topts)' will not trigger
bpf_fentry_test1 function as filter_fd is a sk_filter BPF program.
Fix it by replacing filter_fd with fexit_fd in the bpf_prog_test_run_opts()
function.
Fixes: da00d2f117a0 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220521151329.648013-1-ytcoode@gmail.com
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_link_type_str function instead of maintaining its own string
representation for the bpf_link_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-13-deso@posteo.net
|
|
This change adds a test for libbpf_bpf_link_type_str. The test retrieves
all variants of the bpf_link_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-12-deso@posteo.net
|
|
This change introduces a new function, libbpf_bpf_link_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_link_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-11-deso@posteo.net
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_attach_type_str function instead of maintaining its own
string representation for the bpf_attach_type enum.
Note that contrary to other enum types, the variant names that bpftool
maps bpf_attach_type to do not adhere a simple to follow rule. With
bpf_prog_type, for example, the textual representation can easily be
inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the
remaining string. bpf_attach_type violates this rule for various
variants.
We decided to fix up this deficiency with this change, meaning that
bpftool uses the same textual representations as libbpf. Supporting
tests, completion scripts, and man pages have been adjusted accordingly.
However, we did add support for accepting (the now undocumented)
original attach type names when they are provided by users.
For the test (test_bpftool_synctypes.py), I have removed the enum
representation checks, because we no longer mirror the various enum
variant names in bpftool source code. For the man page, help text, and
completion script checks we are now using enum definitions from
uapi/linux/bpf.h as the source of truth directly.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net
|
|
This change adds a test for libbpf_bpf_attach_type_str. The test
retrieves all variants of the bpf_attach_type enumeration using BTF and
makes sure that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-9-deso@posteo.net
|
|
This change introduces a new function, libbpf_bpf_attach_type_str, to
the public libbpf API. The function allows users to get a string
representation for a bpf_attach_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-8-deso@posteo.net
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_map_type_str function instead of maintaining its own string
representation for the bpf_map_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-7-deso@posteo.net
|
|
This change adds a test for libbpf_bpf_map_type_str. The test retrieves
all variants of the bpf_map_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-6-deso@posteo.net
|
|
This change introduces a new function, libbpf_bpf_map_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_map_type enum variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-5-deso@posteo.net
|
|
This change switches bpftool over to using the recently introduced
libbpf_bpf_prog_type_str function instead of maintaining its own string
representation for the bpf_prog_type enum.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-4-deso@posteo.net
|
|
This change adds a test for libbpf_bpf_prog_type_str. The test retrieves
all variants of the bpf_prog_type enumeration using BTF and makes sure
that the function under test works as expected for them.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-3-deso@posteo.net
|
|
This change introduces a new function, libbpf_bpf_prog_type_str, to the
public libbpf API. The function allows users to get a string
representation for a bpf_prog_type variant.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220523230428.3077108-2-deso@posteo.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - new code bugs:
- af_packet: make sure to pull the MAC header, avoid skb panic in GSO
- ptp_clockmatrix: fix inverted logic in is_single_shot()
- netfilter: flowtable: fix missing FLOWI_FLAG_ANYSRC flag
- dt-bindings: net: adin: fix adi,phy-output-clock description syntax
- wifi: iwlwifi: pcie: rename CAUSE macro, avoid MIPS build warning
Previous releases - regressions:
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
|
|
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
