summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2023-09-13tools headers UAPI: Copy seccomp.h to be able to build 'perf bench' in older ↵Arnaldo Carvalho de Melo
systems The new 'perf bench' for sched-seccomp-notify uses defines and types not available in older systems where we want to have perf available, so grab a copy of this UAPI from the kernel sources to allow that. This will be checked in the future for drift from the original when we build the perf tool, that will warn when that happens like: make: Entering directory '/var/home/acme/git/perf-tools/tools/perf' BUILD: Doing 'make -j32' parallel build Warning: Kernel ABI header differences: Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Vagin <avagin@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kees Kook <keescook@chromium.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/ZQGhMXtwX7RvV3ya@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-09-13selftests/tc-testing: cls_u32: add tests for classidPedro Tammela
As discussed in '3044b16e7c6f', cls_u32 was handling the use of classid incorrectly. Add a test to check if it's conforming to the correct behaviour. Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftests/tc-testing: cls_route: add tests for classidPedro Tammela
As discussed in 'b80b829e9e2c', cls_route was handling the use of classid incorrectly. Add a test to check if it's conforming to the correct behaviour. Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftests/tc-testing: cls_fw: add tests for classidPedro Tammela
As discussed in '76e42ae83199', cls_fw was handling the use of classid incorrectly. Add a few tests to check if it's conforming to the correct behaviour. Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13tools headers UAPI: Sync files changed by new fchmodat2 and map_shadow_stack ↵Arnaldo Carvalho de Melo
syscalls with the kernel sources To pick the changes in these csets: c35559f94ebc3e3b ("x86/shstk: Introduce map_shadow_stack syscall") 78252deb023cf087 ("arch: Register fchmodat2, usually as syscall 452") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible: # perf trace -v -e fchmodat*,map_shadow_stack --max-events=4 Using CPUID AuthenticAMD-25-21-0 Reusing "openat" BPF sys_enter augmenter for "fchmodat" event qualifier tracepoint filter: (common_pid != 3499340 && common_pid != 11259) && (id == 268 || id == 452 || id == 453) ^C# And it'll work as with other syscalls, for instance openat: # perf trace -e openat* --max-events=4 0.000 ( 0.015 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/proc/meminfo", flags: RDONLY|CLOEXEC) = 11 0.068 ( 0.019 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.pressure", flags: RDONLY|CLOEXEC) = 11 0.119 ( 0.008 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.current", flags: RDONLY|CLOEXEC) = 11 0.138 ( 0.006 ms): systemd-oomd/1150 openat(dfd: CWD, filename: "/sys/fs/cgroup/user.slice/user-1001.slice/user@1001.service/memory.min", flags: RDONLY|CLOEXEC) = 11 # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ find tools/perf/arch/ -name "syscall*tbl" | xargs grep -E fchmodat\|sys_map_shadow_stack tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:258 n64 fchmodat sys_fchmodat tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl:452 n64 fchmodat2 sys_fchmodat2 tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:297 common fchmodat sys_fchmodat tools/perf/arch/powerpc/entry/syscalls/syscall.tbl:452 common fchmodat2 sys_fchmodat2 tools/perf/arch/s390/entry/syscalls/syscall.tbl:299 common fchmodat sys_fchmodat sys_fchmodat tools/perf/arch/s390/entry/syscalls/syscall.tbl:452 common fchmodat2 sys_fchmodat2 sys_fchmodat2 tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:268 common fchmodat sys_fchmodat tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:452 common fchmodat2 sys_fchmodat2 tools/perf/arch/x86/entry/syscalls/syscall_64.tbl:453 64 map_shadow_stack sys_map_shadow_stack $ $ grep -Ew map_shadow_stack\|fchmodat2 /tmp/build/perf-tools/arch/x86/include/generated/asm/syscalls_64.c [452] = "fchmodat2", [453] = "map_shadow_stack", $ This addresses these perf build warnings: Warning: Kernel ABI header differences: diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/lkml/ZP8bE7aXDBu%2Fdrak@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-09-13selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.Kuniyuki Iwashima
We add these 8 test cases in bind_wildcard.c to check bind() conflicts. 1st bind() 2nd bind() --------- --------- 0.0.0.0 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 0.0.0.0 0.0.0.0 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 0.0.0.0 127.0.0.1 ::FFFF:0.0.0.0 ::FFFF:0.0.0.0 127.0.0.1 127.0.0.1 ::FFFF:127.0.0.1 ::FFFF:127.0.0.1 127.0.0.1 All test passed without bhash2 and with bhash2 and this series. Before bhash2: $ uname -r 6.0.0-rc1-00393-g0bf73255d3a3 $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Just after bhash2: $ uname -r 6.0.0-rc1-00394-g28044fc1d495 $ ./bind_wildcard ... ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 15 / 16 tests passed. On net.git: $ ./bind_wildcard ... not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4 not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4 # FAILED: 13 / 16 tests passed. With this series: $ ./bind_wildcard ... # PASSED: 16 / 16 tests passed. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.Kuniyuki Iwashima
This is a preparation patch for the following patch. Let's define expected_errno in each test case so that we can add other test cases easily. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-13selftest: tcp: Fix address length in bind_wildcard.c.Kuniyuki Iwashima
The selftest passes the IPv6 address length for an IPv4 address. We should pass the correct length. Note inet_bind_sk() does not check if the size is larger than sizeof(struct sockaddr_in), so there is no real bug in this selftest. Fixes: 13715acf8ab5 ("selftest: Add test for bind() conflicts.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-12selftests/bpf: fix unpriv_disabled check in test_verifierArtem Savkov
Commit 1d56ade032a49 changed the function get_unpriv_disabled() to return its results as a bool instead of updating a global variable, but test_verifier was not updated to keep in line with these changes. Thus unpriv_disabled is always false in test_verifier and unprivileged tests are not properly skipped on systems with unprivileged bpf disabled. Fixes: 1d56ade032a49 ("selftests/bpf: Unprivileged tests for test_loader.c") Signed-off-by: Artem Savkov <asavkov@redhat.com> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230912120631.213139-1-asavkov@redhat.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-12selftests/bpf: Add testcases for tailcall infinite loop fixingLeon Hwang
Add 4 test cases to confirm the tailcall infinite loop bug has been fixed. Like tailcall_bpf2bpf cases, do fentry/fexit on the bpf2bpf, and then check the final count result. tools/testing/selftests/bpf/test_progs -t tailcalls 226/13 tailcalls/tailcall_bpf2bpf_fentry:OK 226/14 tailcalls/tailcall_bpf2bpf_fexit:OK 226/15 tailcalls/tailcall_bpf2bpf_fentry_fexit:OK 226/16 tailcalls/tailcall_bpf2bpf_fentry_entry:OK 226 tailcalls:OK Summary: 1/16 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Link: https://lore.kernel.org/r/20230912150442.2009-4-hffilwlqm@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-12Merge tag 'linux-kselftest-next-6.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: - kselftest runner script to propagate SIGTERM to runner child to avoid kselftest hang - install symlinks required for test execution to avoid test failures - kselftest dependency checker script argument parsing * tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: Keep symlinks, when possible selftests: fix dependency checker script kselftest/runner.sh: Propagate SIGTERM to runner child selftests/ftrace: Correctly enable event in instance-event.tc
2023-09-12selftests: tracing: Fix to unmount tracefs for recovering environmentMasami Hiramatsu (Google)
Fix to unmount the tracefs if the ftracetest mounted it for recovering system environment. If the tracefs is already mounted, this does nothing. Suggested-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/ Fixes: cbd965bde74c ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-12selftests/bpf: ensure all CI arches set CONFIG_BPF_KPROBE_OVERRIDE=yAndrii Nakryiko
Turns out CONFIG_BPF_KPROBE_OVERRIDE=y is only enabled in x86-64 CI, but is not set on aarch64, causing CI failures ([0]). Move CONFIG_BPF_KPROBE_OVERRIDE=y to arch-agnostic CI config. [0] https://github.com/kernel-patches/bpf/actions/runs/6122324047/job/16618390535 Fixes: 7182e56411b9 ("selftests/bpf: Add kprobe_multi override test") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230912055928.1704269-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-12rtla/timerlat_aa: Fix previous IRQ delay for IRQs that happens after thread ↵Daniel Bristot de Oliveira
sample timerlat auto-analysis takes note of all IRQs, before or after the execution of the timerlat thread. Because we cannot go backward in the trace (we will fix it when moving to trace-cmd lib?), timerlat aa take note of the last IRQ execution in the waiting for the IRQ state, and then print it if it is executed after the expected timer IRQ starting time. After the thread sample, the timerlat starts recording the next IRQs as "previous" irq for the next occurrence. However, if an IRQ happens after the thread measurement but before the tracing stops, it is classified as a previous IRQ. That is not wrong, as it can be "previous" for the subsequent activation. What is wrong is considering it as a potential source for the last activation. Ignore the IRQ interference that happens after the IRQ starting time for now. A future improvement for timerlat can be either keeping a list of previous IRQ execution or using the trace-cmd library. Still, it requires further investigation - it is a new feature. Link: https://lore.kernel.org/lkml/a44a3f5c801dcc697bacf7325b65d4a5b0460537.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2023-09-12rtla/timerlat_aa: Fix negative IRQ delayDaniel Bristot de Oliveira
When estimating the IRQ timer delay, we are dealing with two different clock sources: the external clock source that timerlat uses as a reference and the clock used by the tracer. There are also two moments: the time reading the clock and the timer in which the event is placed in the buffer (the trace event timestamp). If the processor is slow or there is some hardware noise, the difference between the timestamp and the external clock, read can be longer than the IRQ handler delay, resulting in a negative time. If so, set IRQ to start delay as 0. In the end, it is less near-zero and relevant then the noise. Link: https://lore.kernel.org/lkml/a066fb667c7136d86dcddb3c7ccd72587db3e7c7.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2023-09-12rtla/timerlat_aa: Zero thread sum after every sample analysisDaniel Bristot de Oliveira
The thread thread_thread_sum accounts for thread interference during a single activation. It was not being zeroed, so it was accumulating thread interference over all activations. It was not that visible when timerlat was the highest priority. Link: https://lore.kernel.org/lkml/97bff55b0141f2d01b47d9450a5672fde147b89a.1691162043.git.bristot@kernel.org Fixes: 27e348b221f6 ("rtla/timerlat: Add auto-analysis core") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2023-09-11selftests/bpf: Offloaded prog after non-offloaded should not cause BUGEduard Zingerman
Check what happens if non-offloaded dev bound BPF program is followed by offloaded dev bound program. Test case adapated from syzbot report [1]. [1] https://lore.kernel.org/bpf/000000000000d97f3c060479c4f8@google.com/ Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20230912005539.2248244-3-eddyz87@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-09-12objtool: Fix _THIS_IP_ detection for cold functionsJosh Poimboeuf
Cold functions and their non-cold counterparts can use _THIS_IP_ to reference each other. Don't warn about !ENDBR in that case. Note that for GCC this is currently irrelevant in light of the following commit c27cd083cfb9 ("Compiler attributes: GCC cold function alignment workarounds") which disabled cold functions in the kernel. However this may still be possible with Clang. Fixes several warnings like the following: drivers/scsi/bnx2i/bnx2i.prelink.o: warning: objtool: bnx2i_hw_ep_disconnect+0x19d: relocation to !ENDBR: bnx2i_hw_ep_disconnect.cold+0x0 drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr4_event.cold+0x28: relocation to !ENDBR: ipvlan_addr4_event+0xda drivers/net/ipvlan/ipvlan.prelink.o: warning: objtool: ipvlan_addr6_event.cold+0x26: relocation to !ENDBR: ipvlan_addr6_event+0xb7 drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_set_ringparam.cold+0x17: relocation to !ENDBR: tg3_set_ringparam+0x115 drivers/net/ethernet/broadcom/tg3.prelink.o: warning: objtool: tg3_self_test.cold+0x17: relocation to !ENDBR: tg3_self_test+0x2e1 drivers/target/iscsi/cxgbit/cxgbit.prelink.o: warning: objtool: __cxgbit_free_conn.cold+0x24: relocation to !ENDBR: __cxgbit_free_conn+0xfb net/can/can.prelink.o: warning: objtool: can_rx_unregister.cold+0x2c: relocation to !ENDBR: can_rx_unregister+0x11b drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_spq_post+0xc0: relocation to !ENDBR: qed_spq_post.cold+0x9a drivers/net/ethernet/qlogic/qed/qed.prelink.o: warning: objtool: qed_iwarp_ll2_comp_syn_pkt.cold+0x12f: relocation to !ENDBR: qed_iwarp_ll2_comp_syn_pkt+0x34b net/tipc/tipc.prelink.o: warning: objtool: tipc_nametbl_publish.cold+0x21: relocation to !ENDBR: tipc_nametbl_publish+0xa6 Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/d8f1ab6a23a6105bc023c132b105f245c7976be6.1694476559.git.jpoimboe@kernel.org
2023-09-11selftests: user_events: create test-specific Kconfig fragmentsNaresh Kamboju
Create the config file in user_events directory of testcase which need more kernel configuration than the default defconfig. User could use these configs with merge_config.sh script: The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read data from the following files, - "/sys/kernel/tracing/user_events_data" - "/sys/kernel/tracing/user_events_status" - "/sys/kernel/tracing/events/user_events/*" Enable config for specific testcase: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/user_events/config Enable configs for all testcases: (export ARCH=xxx #for cross compiling) ./scripts/kconfig/merge_config.sh .config \ tools/testing/selftests/*/config Cc: Beau Belgrave <beaub@linux.microsoft.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-kselftest@vger.kernel.org Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-11ftrace/selftests: Add softlink to latest log directorySteven Rostedt (Google)
When I'm debugging something with the ftrace selftests and need to look at the logs, it becomes tedious that I need to do the following: ls -ltr logs [ copy the last directory ] ls logs/<paste-last-dir> to see where the logs are. Instead, do the common practice of having a "latest" softlink to the last run selftest. This way after running the selftest I only need to do: ls logs/latest/ and it will always give me the directory of the last run selftest logs! Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-11selftests/user_events: Fix failures when user_events is not installedBeau Belgrave
When user_events is not installed the self tests currently fail. Now that these self tests run by default we need to ensure they don't fail when user_events was not enabled for the kernel being tested. Add common methods to detect if tracefs and user_events is enabled. If either is not enabled skip the test. If tracefs is enabled, but is not mounted, mount tracefs and fail if there were any errors. Fail if not run as root. Fixes: 68b4d2d58389 ("selftests/user_events: Reenable build") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/ Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-11selftests/bpf: Correct map_fd to data_fd in tailcallsLeon Hwang
Get and check data_fd. It should not check map_fd again. Meanwhile, correct some 'return' to 'goto out'. Thank the suggestion from Maciej in "bpf, x64: Fix tailcall infinite loop"[0] discussions. [0] https://lore.kernel.org/bpf/e496aef8-1f80-0f8e-dcdd-25a8c300319a@gmail.com/T/#m7d3b601066ba66400d436b7e7579b2df4a101033 Fixes: 79d49ba048ec ("bpf, testing: Add various tail call test cases") Fixes: 3b0379111197 ("selftests/bpf: Add tailcall_bpf2bpf tests") Fixes: 5e0b0a4c52d3 ("selftests/bpf: Test tail call counting with bpf2bpf and data on stack") Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20230906154256.95461-1-hffilwlqm@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2023-09-11selftests/bpf: Update bpf_clone_redirect expected return codeStanislav Fomichev
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") started propagating proper NET_XMIT_DROP error to the caller which means it's now possible to get positive error code when calling bpf_clone_redirect() in this particular test. Update the test to reflect that. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230911194731.286342-2-sdf@google.com
2023-09-11bpf: Clarify error expectations from bpf_clone_redirectStanislav Fomichev
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped packets") exposed the fact that bpf_clone_redirect is capable of returning raw NET_XMIT_XXX return codes. This is in the conflict with its UAPI doc which says the following: "0 on success, or a negative error in case of failure." Update the UAPI to reflect the fact that bpf_clone_redirect can return positive error numbers, but don't explicitly define their meaning. Reported-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
2023-09-11selftests/bpf: Test all valid alloc sizes for bpf mem allocatorHou Tao
Add a test to test all possible and valid allocation size for bpf memory allocator. For each possible allocation size, the test uses the following two steps to test the alloc and free path: 1) allocate N (N > high_watermark) objects to trigger the refill executed in irq_work. 2) free N objects to trigger the freeing executed in irq_work. Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-11perf tools: Update copy of libbpf's hashmap.cArnaldo Carvalho de Melo
To pick the changes in: a3e7e6b17946f48b ("libbpf: Remove HASHMAP_INIT static initialization helper") That don't entail any changes in tools/perf. This addresses this perf build warning: Warning: Kernel ABI header differences: diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Not a kernel ABI, its just that this uses the mechanism in place for checking kernel ABI files drift. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-09-11selftests: ALSA: remove unused variablesDing Xiang
These variables are never referenced in the code, just remove them. Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230908081040.197243-1-dingxiang@cmss.chinamobile.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-10selftests/net: Improve bind_bhash.sh to accommodate predictable network ↵Juntong Deng
interface names Starting with v197, systemd uses predictable interface network names, the traditional interface naming scheme (eth0) is deprecated, therefore it cannot be assumed that the eth0 interface exists on the host. This modification makes the bind_bhash test program run in a separate network namespace and no longer needs to consider the name of the network interface on the host. Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-09Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools updates from Arnaldo Carvalho de Melo: "perf tools maintainership: - Add git information for perf-tools and perf-tools-next trees and branches to the MAINTAINERS file. That is where development now takes place and myself and Namhyung Kim have write access, more people to come as we emulate other maintainer groups. perf record: - Record kernel data maps when 'perf record --data' is used, so that global variables can be resolved and used in tools that do data profiling. perf trace: - Remove the old, experimental support for BPF events in which a .c file was passed as an event: "perf trace -e hello.c" to then get compiled and loaded. The only known usage for that, that shipped with the kernel as an example for such events, augmented the raw_syscalls tracepoints and was converted to a libbpf skeleton, reusing all the user space components and the BPF code connected to the syscalls. In the end just the way to glue the BPF part and the user space type beautifiers changed, now being performed by libbpf skeletons. The next step is to use BTF to do pretty printing of all syscall types, as discussed with Alan Maguire and others. Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all path/filenames/strings, some of the networking data structures, perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5 seconds: # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5 0.000 ( 9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3 9.039 ( 0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 ? ( ): gpm/991 ... [continued]: clock_nanosleep()) = 0 10.133 ( ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ... ? ( ): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 30.276 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 30.276 (2000.394 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 1230.814 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 1230.814 (1000.404 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 2030.886 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0 ? ( ): crond/1172 ... [continued]: clock_nanosleep()) = 0 3242.699 ( ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ... 2030.886 (2000.385 ms): gpm/991 ... [continued]: clock_nanosleep()) = 0 3728.078 ( ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ... 3242.699 (1000.158 ms): pool-gsd-smart/3051 ... [continued]: clock_nanosleep()) = 0 4031.409 ( ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ... 10.133 (5000.375 ms): sleep/327642 ... [continued]: clock_nanosleep()) = 0 Performance counter stats for 'sleep 5': 2,617,347 cycles 1,855,997 instructions # 0.71 insn per cycle 5.002282128 seconds time elapsed 0.000855000 seconds user 0.000852000 seconds sys perf annotate: - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1) for licensing reasons, and we missed a build test on tools/perf/tests makefile. Since we now default to NDEBUG=1, we ended up segfaulting when building with BUILD_NONDISTRO=1 because a needed initialization routine was being "error checked" via an assert. Fix it by explicitly checking the result and aborting instead if it fails. We better back propagate the error, but at least 'perf annotate' on samples collected for a BPF program is back working when perf is built with BUILD_NONDISTRO=1. perf report/top: - Add back TUI hierarchy mode header, that is seen when using 'perf report/top --hierarchy'. - Fix the number of entries for 'e' key in the TUI that was preventing navigation of lines when expanding an entry. perf report/script: - Support cross platform register handling, allowing a perf.data file collected on one architecture to have registers sampled correctly displayed when analysis tools such as 'perf report' and 'perf script' are used on a different architecture. - Fix handling of event attributes in pipe mode, i.e. when one uses: perf record -o - | perf report -i - When no perf.data files are used. - Handle files generated via pipe mode with a version of perf and then read also via pipe mode with a different version of perf, where the event attr record may have changed, use the record size field to properly support this version mismatch. perf probe: - Accessing global variables from uprobes isn't supported, make the error message state that instead of stating that some minimal kernel version is needed to have that feature. This seems just a tool limitation, the kernel probably has all that is needed. perf tests: - Fix a reference count related leak in the dlfilter v0 API where the result of a thread__find_symbol_fb() is not matched with an addr_location__exit() to drop the reference counts of the resolved components (machine, thread, map, symbol, etc). Add a dlfilter test to make sure that doesn't regresses. - Lots of fixes for the 'perf test' written in shell script related to problems found with the shellcheck utility. - Fixes for 'perf test' shell scripts testing features enabled when perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf counters. - Add perf record sample filtering test, things like the following example, that gets implemented as a BPF filter attached to the event: # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000' - Improve the way the task_analyzer test checks if libtraceevent is linked, using 'perf version --build-options' instead of the more expensinve 'perf record -e "sched:sched_switch"'. - Add support for riscv in the mmap-basic test. (This went as well via the RiscV tree, same contents). libperf: - Implement riscv mmap support (This went as well via the RiscV tree, same contents). perf script: - New tool that converts perf.data files to the firefox profiler format so that one can use the visualizer at https://profiler.firefox.com/. Done by Anup Sharma as part of this year's Google Summer of Code. One can generate the output and upload it to the web interface but Anup also automated everything: perf script gecko -F 99 -a sleep 60 - Support syscall name parsing on arm64. - Print "cgroup" field on the same line as "comm". perf bench: - Add new 'uprobe' benchmark to measure the overhead of uprobes with/without BPF programs attached to it. - breakpoints are not available on power9, skip that test. perf stat: - Add #num_cpus_online literal to be used in 'perf stat' metrics, and add this extra 'perf test' check that exemplifies its purpose: TEST_ASSERT_VAL("#num_cpus_online", expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0); TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0); TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online); Miscellaneous: - Improve tool startup time by lazily reading PMU, JSON, sysfs data. - Improve error reporting in the parsing of events, passing YYLTYPE to error routines, so that the output can show were the parsing error was found. - Add 'perf test' entries to check the parsing of events improvements. - Fix various leak for things detected by -fsanitize=address, mostly things that would be freed at tool exit, including: - Free evsel->filter on the destructor. - Allow tools to register a thread->priv destructor and use it in 'perf trace'. - Free evsel->priv in 'perf trace'. - Free string returned by synthesize_perf_probe_point() when the caller fails to do all it needs. - Adjust various compiler options to not consider errors some warnings when building with broken headers found in things like python, flex, bison, as we otherwise build with -Werror. Some for gcc, some for clang, some for some specific version of those, some for some specific version of flex or bison, or some specific combination of these components, bah. - Allow customization of clang options for BPF target, this helps building on gentoo where there are other oddities where BPF targets gets passed some compiler options intended for the native build, so building with WERROR=0 helps while these oddities are fixed. - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top' and 'perf lock', fixing some segfaults when handling some odd failures. - Add LTO build option. - Fix format of unordered lists in the perf docs (tools/perf/Documentation) - Overhaul the bison files, using constructs such as YYNOMEM. - Remove unused tokens from the bison .y files. - Add more comments to various structs. - A few LoongArch enablement patches. Vendor events (JSON): - Add JSON metrics for Yitian 710 DDR (aarch64). Things like: EventName, BriefDescription visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.", visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.", op_is_dqsosc_mpc , "A DQS Oscillator MPC command to DRAM.", op_is_dqsosc_mrr , "A DQS Oscillator MRR command to DRAM.", op_is_tcr_mrr , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.", - Add AmpereOne metrics (aarch64). - Update N2 and V2 metrics (aarch64) and events using Arm telemetry repo. - Update scale units and descriptions of common topdown metrics on aarch64. Things like: - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)", - "BriefDescription": "Frontend bound L1 topdown metric", + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))", + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.", - Update events for intel: meteorlake to 1.04, sapphirerapids to 1.15, Icelake+ metric constraints. - Update files for the power10 platform" * tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits) perf parse-events: Fix driver config term perf parse-events: Fixes relating to no_value terms perf parse-events: Fix propagation of term's no_value when cloning perf parse-events: Name the two term enums perf list: Don't print Unit for "default_core" perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake perf dlfilter: Avoid leak in v0 API test use of resolve_address() perf metric: Add #num_cpus_online literal perf pmu: Remove str from perf_pmu_alias perf parse-events: Make common term list to strbuf helper perf parse-events: Minor help message improvements perf pmu: Avoid uninitialized use of alias->str perf jevents: Use "default_core" for events with no Unit perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test perf test shell stat_bpf_counters: Fix test on Intel perf test shell record_bpf_filter: Skip 6.2 kernel libperf: Get rid of attr.id field perf tools: Convert to perf_record_header_attr_id() libperf: Add perf_record_header_attr_id() perf tools: Handle old data in PERF_RECORD_ATTR ...
2023-09-08Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarrayLinus Torvalds
Pull xarray fixes from Matthew Wilcox: - Fix a bug encountered by people using bittorrent where they'd get NULL pointer dereferences on page cache lookups when using XFS - Two documentation fixes * tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray: idr: fix param name in idr_alloc_cyclic() doc xarray: Document necessary flag in alloc functions XArray: Do not return sibling entries from xa_load()
2023-09-08selftests/ftrace: Fix dependencies for some of the synthetic event testsNaveen N Rao
Commit b81a3a100cca1b ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events") changed the output text in tracefs README, but missed updating some of the dependencies specified in selftests. This causes some of the tests to exit as unsupported. Fix this by changing the grep pattern. Since we want these tests to work on older kernels, match only against the common last part of the pattern. Link: https://lore.kernel.org/linux-trace-kernel/20230614091046.2178539-1-naveen@kernel.org Cc: <linux-kselftest@vger.kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Fixes: b81a3a100cca ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events") Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-09-08bpftool: Fix -Wcast-qual warningDenys Zagorui
This cast was made by purpose for older libbpf where the bpf_object_skeleton field is void * instead of const void * to eliminate a warning (as i understand -Wincompatible-pointer-types-discards-qualifiers) but this cast introduces another warning (-Wcast-qual) for libbpf where data field is const void * It makes sense for bpftool to be in sync with libbpf from kernel sources Signed-off-by: Denys Zagorui <dzagorui@cisco.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
2023-09-08selftests/bpf: Add kprobe_multi override testJiri Olsa
Adding test that tries to attach program with bpf_override_return helper to function not within error injection list. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org
2023-09-08selftests/bpf: trace_helpers.c: Add a global ksyms initialization mutexRong Tao
As Jirka said [0], we just need to make sure that global ksyms initialization won't race. [0] https://lore.kernel.org/lkml/ZPCbAs3ItjRd8XVh@krava/ Signed-off-by: Rong Tao <rongtao@cestc.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/tencent_5D0A837E219E2CFDCB0495DAD7D5D1204407@qq.com
2023-09-08selftests/bpf: trace_helpers.c: Optimize kallsyms cacheRong Tao
Static ksyms often have problems because the number of symbols exceeds the MAX_SYMS limit. Like changing the MAX_SYMS from 300000 to 400000 in commit e76a014334a6("selftests/bpf: Bump and validate MAX_SYMS") solves the problem somewhat, but it's not the perfect way. This commit uses dynamic memory allocation, which completely solves the problem caused by the limitation of the number of kallsyms. At the same time, add APIs: load_kallsyms_local() ksym_search_local() ksym_get_addr_local() free_kallsyms_local() There are used to solve the problem of selftests/bpf updating kallsyms after attach new symbols during testmod testing. Signed-off-by: Rong Tao <rongtao@cestc.cn> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/tencent_C9BDA68F9221F21BE4081566A55D66A9700A@qq.com
2023-09-08Merge tag 'landlock-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "One test fix and a __counted_by annotation" * tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Fix a resource leak landlock: Annotate struct landlock_rule with __counted_by
2023-09-08selftests: Keep symlinks, when possibleBjörn Töpel
When kselftest is built/installed with the 'gen_tar' target, rsync is used for the installation step to copy files. Extra care is needed for tests that have symlinks. Commit ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") added '-L' (transform symlink into referent file/dir) to rsync, to fix dangling links. However, that broke some tests where the symlink (being a symlink) is part of the test (e.g. exec:execveat). Use rsync's '--copy-unsafe-links' that does right thing. Fixes: ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-08selftests: fix dependency checker scriptRicardo B. Marliere
This patch fixes inconsistencies in the parsing rules of the levels 1 and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to account for a few edge cases that are present in some tests, also some minor identation styling have been fixed (s/ /\t/g). Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-08kselftest/runner.sh: Propagate SIGTERM to runner childBjörn Töpel
Timeouts in kselftest are done using the "timeout" command with the "--foreground" option. Without the "foreground" option, it is not possible for a user to cancel the runner using SIGINT, because the signal is not propagated to timeout which is running in a different process group. The "forground" options places the timeout in the same process group as its parent, but only sends the SIGTERM (on timeout) signal to the forked process. Unfortunately, this does not play nice with all kselftests, e.g. "net:fcnal-test.sh", where the child processes will linger because timeout does not send SIGTERM to the group. Some users have noted these hangs [1]. Fix this by nesting the timeout with an additional timeout without the foreground option. Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ # [1] Fixes: 651e0d881461 ("kselftest/runner: allow to properly deliver signals to tests") Signed-off-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-08selftests/bpf: Test preemption between bpf_obj_new() and bpf_obj_drop()Hou Tao
The test case creates 4 threads and then pins these 4 threads in CPU 0. These 4 threads will run different bpf program through bpf_prog_test_run_opts() and these bpf program will use bpf_obj_new() and bpf_obj_drop() to allocate and free local kptrs concurrently. Under preemptible kernel, bpf_obj_new() and bpf_obj_drop() may preempt each other, bpf_obj_new() may return NULL and the test will fail before applying these fixes as shown below: test_preempted_bpf_ma_op:PASS:open_and_load 0 nsec test_preempted_bpf_ma_op:PASS:attach 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:no test prog 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:PASS:run prog err 0 nsec test_preempted_bpf_ma_op:FAIL:ENOMEM unexpected ENOMEM: got TRUE #168 preempted_bpf_ma_op:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Signed-off-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/r/20230901111954.1804721-4-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08bpf: Mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecatedYonghong Song
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr' can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated. Also make changes in selftests/bpf/test_bpftool_synctypes.py and selftest libbpf_str to fix otherwise test errors. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Add some negative testsYonghong Song
Add a few negative tests for common mistakes with using percpu kptr including: - store to percpu kptr. - type mistach in bpf_kptr_xchg arguments. - sleepable prog with untrusted arg for bpf_this_cpu_ptr(). - bpf_percpu_obj_new && bpf_obj_drop, and bpf_obj_new && bpf_percpu_obj_drop - struct with ptr for bpf_percpu_obj_new - struct with special field (e.g., bpf_spin_lock) for bpf_percpu_obj_new Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152832.2002421-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Add tests for cgrp_local_storage with local percpu kptrYonghong Song
Add a non-sleepable cgrp_local_storage test with percpu kptr. The test does allocation of percpu data, assigning values to percpu data and retrieval of percpu data. The de-allocation of percpu data is done when the map is freed. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152827.2001784-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Remove unnecessary direct read of local percpu kptrYonghong Song
For the second argument of bpf_kptr_xchg(), if the reg type contains MEM_ALLOC and MEM_PERCPU, which means a percpu allocation, after bpf_kptr_xchg(), the argument is marked as MEM_RCU and MEM_PERCPU if in rcu critical section. This way, re-reading from the map value is not needed. Remove it from the percpu_alloc_array.c selftest. Without previous kernel change, the test will fail like below: 0: R1=ctx(off=0,imm=0) R10=fp0 ; int BPF_PROG(test_array_map_10, int a) 0: (b4) w1 = 0 ; R1_w=0 ; int i, index = 0; 1: (63) *(u32 *)(r10 -4) = r1 ; R1_w=0 R10=fp0 fp-8=0000???? 2: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 ; 3: (07) r2 += -4 ; R2_w=fp-4 ; e = bpf_map_lookup_elem(&array, &index); 4: (18) r1 = 0xffff88810e771800 ; R1_w=map_ptr(off=0,ks=4,vs=16,imm=0) 6: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) 7: (bf) r6 = r0 ; R0_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) R6_w=map_value_or_null(id=1,off=0,ks=4,vs=16,imm=0) ; if (!e) 8: (15) if r6 == 0x0 goto pc+81 ; R6_w=map_value(off=0,ks=4,vs=16,imm=0) ; bpf_rcu_read_lock(); 9: (85) call bpf_rcu_read_lock#87892 ; ; p = e->pc; 10: (bf) r7 = r6 ; R6=map_value(off=0,ks=4,vs=16,imm=0) R7_w=map_value(off=0,ks=4,vs=16,imm=0) 11: (07) r7 += 8 ; R7_w=map_value(off=8,ks=4,vs=16,imm=0) 12: (79) r6 = *(u64 *)(r6 +8) ; R6_w=percpu_rcu_ptr_or_null_val_t(id=2,off=0,imm=0) ; if (!p) { 13: (55) if r6 != 0x0 goto pc+13 ; R6_w=0 ; p = bpf_percpu_obj_new(struct val_t); 14: (18) r1 = 0x12 ; R1_w=18 16: (b7) r2 = 0 ; R2_w=0 17: (85) call bpf_percpu_obj_new_impl#87883 ; R0_w=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4 18: (bf) r6 = r0 ; R0=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_or_null_val_t(id=4,ref_obj_id=4,off=0,imm=0) refs=4 ; if (!p) 19: (15) if r6 == 0x0 goto pc+69 ; R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4 ; p1 = bpf_kptr_xchg(&e->pc, p); 20: (bf) r1 = r7 ; R1_w=map_value(off=8,ks=4,vs=16,imm=0) R7=map_value(off=8,ks=4,vs=16,imm=0) refs=4 21: (bf) r2 = r6 ; R2_w=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) refs=4 22: (85) call bpf_kptr_xchg#194 ; R0_w=percpu_ptr_or_null_val_t(id=6,ref_obj_id=6,off=0,imm=0) refs=6 ; if (p1) { 23: (15) if r0 == 0x0 goto pc+3 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6 ; bpf_percpu_obj_drop(p1); 24: (bf) r1 = r0 ; R0_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) R1_w=percpu_ptr_val_t(ref_obj_id=6,off=0,imm=0) refs=6 25: (b7) r2 = 0 ; R2_w=0 refs=6 26: (85) call bpf_percpu_obj_drop_impl#87882 ; ; v = bpf_this_cpu_ptr(p); 27: (bf) r1 = r6 ; R1_w=scalar(id=7) R6=scalar(id=7) 28: (85) call bpf_this_cpu_ptr#154 R1 type=scalar expected=percpu_ptr_, percpu_rcu_ptr_, percpu_trusted_ptr_ The R1 which gets its value from R6 is a scalar. But before insn 22, R6 is R6=percpu_ptr_val_t(ref_obj_id=4,off=0,imm=0) Its type is changed to a scalar at insn 22 without previous patch. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152821.2001129-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Add tests for array map with local percpu kptrYonghong Song
Add non-sleepable and sleepable tests with percpu kptr. For non-sleepable test, four programs are executed in the order of: 1. allocate percpu data. 2. assign values to percpu data. 3. retrieve percpu data. 4. de-allocate percpu data. The sleepable prog tried to exercise all above 4 steps in a single prog. Also for sleepable prog, rcu_read_lock is needed to protect direct percpu ptr access (from map value) and following bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152811.2000125-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Add bpf_percpu_obj_{new,drop}() macro in bpf_experimental.hYonghong Song
The new macro bpf_percpu_obj_{new/drop}() is very similar to bpf_obj_{new,drop}() as they both take a type as the argument. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152805.1999417-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08libbpf: Add __percpu_kptr macro definitionYonghong Song
Add __percpu_kptr macro definition in bpf_helpers.h. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152800.1998492-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08selftests/bpf: Update error message in negative linked_list testYonghong Song
Some error messages are changed due to the addition of percpu kptr support. Fix linked_list test with changed error messages. Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230827152754.1997769-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-09-08libbpf: Add basic BTF sanity validationAndrii Nakryiko
Implement a simple and straightforward BTF sanity check when parsing BTF data. Right now it's very basic and just validates that all the string offsets and type IDs are within valid range. For FUNC we also check that it points to FUNC_PROTO kinds. Even with such simple checks it fixes a bunch of crashes found by OSS fuzzer ([0]-[5]) and will allow fuzzer to make further progress. Some other invariants will be checked in follow up patches (like ensuring there is no infinite type loops), but this seems like a good start already. Adding FUNC -> FUNC_PROTO check revealed that one of selftests has a problem with FUNC pointing to VAR instead, so fix it up in the same commit. [0] https://github.com/libbpf/libbpf/issues/482 [1] https://github.com/libbpf/libbpf/issues/483 [2] https://github.com/libbpf/libbpf/issues/485 [3] https://github.com/libbpf/libbpf/issues/613 [4] https://github.com/libbpf/libbpf/issues/618 [5] https://github.com/libbpf/libbpf/issues/619 Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Song Liu <song@kernel.org> Closes: https://github.com/libbpf/libbpf/issues/617 Link: https://lore.kernel.org/bpf/20230825202152.1813394-1-andrii@kernel.org
2023-09-07Merge tag 'net-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking updates from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - eth: stmmac: fix failure to probe without MAC interface specified Current release - new code bugs: - docs: netlink: fix missing classic_netlink doc reference Previous releases - regressions: - deal with integer overflows in kmalloc_reserve() - use sk_forward_alloc_get() in sk_get_meminfo() - bpf_sk_storage: fix the missing uncharge in sk_omem_alloc - fib: avoid warn splat in flow dissector after packet mangling - skb_segment: call zero copy functions before using skbuff frags - eth: sfc: check for zero length in EF10 RX prefix Previous releases - always broken: - af_unix: fix msg_controllen test in scm_pidfd_recv() for MSG_CMSG_COMPAT - xsk: fix xsk_build_skb() dereferencing possible ERR_PTR() - netfilter: - nft_exthdr: fix non-linear header modification - xt_u32, xt_sctp: validate user space input - nftables: exthdr: fix 4-byte stack OOB write - nfnetlink_osf: avoid OOB read - one more fix for the garbage collection work from last release - igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU - bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t - handshake: fix null-deref in handshake_nl_done_doit() - ip: ignore dst hint for multipath routes to ensure packets are hashed across the nexthops - phy: micrel: - correct bit assignments for cable test errata - disable EEE according to the KSZ9477 errata Misc: - docs/bpf: document compile-once-run-everywhere (CO-RE) relocations - Revert "net: macsec: preserve ingress frame ordering", it appears to have been developed against an older kernel, problem doesn't exist upstream" * tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits) net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs() Revert "net: team: do not use dynamic lockdep key" net: hns3: remove GSO partial feature bit net: hns3: fix the port information display when sfp is absent net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue net: hns3: fix debugfs concurrency issue between kfree buffer and read net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read() net: hns3: Support query tx timeout threshold by debugfs net: hns3: fix tx timeout issue net: phy: Provide Module 4 KSZ9477 errata (DS80000754C) netfilter: nf_tables: Unbreak audit log reset netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID netfilter: nfnetlink_osf: avoid OOB read netfilter: nftables: exthdr: fix 4-byte stack OOB write selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc bpf: bpf_sk_storage: Fix invalid wait context lockdep report s390/bpf: Pass through tail call counter in trampolines ...
generated by cgit (git 2.34.1) at 2025-07-16 00:17:23 +0000