| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to
extend xdp_redirect_map for broadcast support.
With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.
When getting the devices in dev hash map via dev_map_hash_get_next_key(),
there is a possibility that we fall back to the first key when a device
was removed. This will duplicate packets on some interfaces. So just walk
the whole buckets to avoid this issue. For dev array map, we also walk the
whole map to find valid interfaces.
Function bpf_clear_redirect_map() was removed in
commit ee75aef23afe ("bpf, xdp: Restructure redirect actions").
Add it back as we need to use ri->map again.
With test topology:
+-------------------+ +-------------------+
| Host A (i40e 10G) | ---------- | eno1(i40e 10G) |
+-------------------+ | |
| Host B |
+-------------------+ | |
| Host C (i40e 10G) | ---------- | eno2(i40e 10G) |
+-------------------+ | |
| +------+ |
| veth0 -- | Peer | |
| veth1 -- | | |
| veth2 -- | NS | |
| +------+ |
+-------------------+
On Host A:
# pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64
On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory):
Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing.
All the veth peers in the NS have a XDP_DROP program loaded. The
forward_map max_entries in xdp_redirect_map_multi is modify to 4.
Testing the performance impact on the regular xdp_redirect path with and
without patch (to check impact of additional check for broadcast mode):
5.12 rc4 | redirect_map i40e->i40e | 2.0M | 9.7M
5.12 rc4 | redirect_map i40e->veth | 1.7M | 11.8M
5.12 rc4 + patch | redirect_map i40e->i40e | 2.0M | 9.6M
5.12 rc4 + patch | redirect_map i40e->veth | 1.7M | 11.7M
Testing the performance when cloning packets with the redirect_map_multi
test, using a redirect map size of 4, filled with 1-3 devices:
5.12 rc4 + patch | redirect_map multi i40e->veth (x1) | 1.7M | 11.4M
5.12 rc4 + patch | redirect_map multi i40e->veth (x2) | 1.1M | 4.3M
5.12 rc4 + patch | redirect_map multi i40e->veth (x3) | 0.8M | 2.6M
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com
|
|
Follow libbpf's error handling conventions and pass through errors and errno
properly. Skeleton code always returned NULL on errors (not ERR_PTR(err)), so
there are no backwards compatibility concerns. But now we also set errno
properly, so it's possible to distinguish different reasons for failure, if
necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-6-andrii@kernel.org
|
|
Implement changes to error reporting for high-level libbpf APIs to make them
less surprising and less error-prone to users:
- in all the cases when error happens, errno is set to an appropriate error
value;
- in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and
error code is communicated through errno; this applies both to APIs that
already returned NULL before (so now they communicate more detailed error
codes), as well as for many APIs that used ERR_PTR() macro and encoded
error numbers as fake pointers.
- in legacy (default) mode, those APIs that were returning ERR_PTR(err),
continue doing so, but still set errno.
With these changes, errno can be always used to extract actual error,
regardless of legacy or libbpf 1.0 modes. This is utilized internally in
libbpf in places where libbpf uses it's own high-level APIs.
libbpf_get_error() is adapted to handle both cases completely transparently to
end-users (and is used by libbpf consistently as well).
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-5-andrii@kernel.org
|
|
Ensure that low-level APIs behave uniformly across the libbpf as follows:
- in case of an error, errno is always set to the correct error code;
- when libbpf 1.0 mode is enabled with LIBBPF_STRICT_DIRECT_ERRS option to
libbpf_set_strict_mode(), return -Exxx error value directly, instead of -1;
- by default, until libbpf 1.0 is released, keep returning -1 directly.
More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).
[0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-4-andrii@kernel.org
|
|
Turn ony libbpf 1.0 mode. Fix all the explicit IS_ERR checks that now will be
broken because libbpf returns NULL on error (and sets errno). Fix
ASSERT_OK_PTR and ASSERT_ERR_PTR to work for both old mode and new modes and
use them throughout selftests. This is trivial to do by using
libbpf_get_error() API that all libbpf users are supposed to use, instead of
IS_ERR checks.
A bunch of checks also did explicit -1 comparison for various fd-returning
APIs. Such checks are replaced with >= 0 or < 0 cases.
There were also few misuses of bpf_object__find_map_by_name() in test_maps.
Those are fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-3-andrii@kernel.org
|
|
Add libbpf_set_strict_mode() API that allows application to simulate libbpf
1.0 breaking changes before libbpf 1.0 is released. This will help users
migrate gradually and with confidence.
For now only ALL or NONE options are available, subsequent patches will add
more flags. This patch is preliminary for selftests/bpf changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-2-andrii@kernel.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-26
The following pull-request contains BPF updates for your *net* tree.
We've added 14 non-merge commits during the last 14 day(s) which contain
a total of 17 files changed, 513 insertions(+), 231 deletions(-).
The main changes are:
1) Fix bpf_skb_change_head() helper to reset mac_len, from Jussi Maki.
2) Fix masking direction swap upon off-reg sign change, from Daniel Borkmann.
3) Fix BPF offloads in verifier by reordering driver callback, from Yinjun Zhang.
4) BPF selftest for ringbuf mmap ro/rw restrictions, from Andrii Nakryiko.
5) Follow-up fixes to nested bprintf per-cpu buffers, from Florent Revest.
6) Fix bpftool sock_release attach point help info, from Liu Jian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
The newline is expected to come from the caller but got missed for this
test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210518163331.38268-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a test case for using bpf_skb_change_head() in combination with
bpf_redirect_peer() to redirect a packet from a L3 device to veth and back.
The test uses a BPF program that adds L2 headers to the packet coming
from a L3 device and then calls bpf_redirect_peer() to redirect the packet
to a veth device. The test fails as skb->mac_len is not set properly and
thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(),
causing tcp_v4_rcv() to point the TCP header into middle of the IP header.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210525102955.2811090-1-joamaki@gmail.com
|
|
The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.
Fixes: db94cc0b4805 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
|
|
As an example, add branch information to intel-pt-events.py script.
This shows how a simple python script can be used to customize
perf script output for Intel PT branch traces or power event traces.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add auxtrace_error to general python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add context_switch to general python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add cpumode to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add IPC to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add sample flags to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out perf_sample__sprintf_flags() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If sample addr correlates to a symbol, add "addr_dso", "addr_symbol", and
"addr_symoff" to python scripting.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out set_sym_in_dict() so it can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
tuple_set_u64() produces a signed value instead of an unsigned value.
That works for database export but not other cases. Rename to
tuple_set_d64() for database export and fix tuple_set_u64().
Fixes: df919b400ad3f ("perf scripting python: Extend interface to export data in a database-friendly way")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20210525095112.1399-2-adrian.hunter@intel.com
|
|
As we'll use it in the upcoming python interfaces and when built with:
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
+NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1
+NO_SYSCALL_TABLE=1
BUILD: Doing 'make -j24' parallel build
<SNIP>
CC /tmp/tmp.rGrdpQlTCr/builtin-daemon.o
In file included from util/events_stats.h:8,
from util/evlist.h:12,
from builtin-script.c:18:
builtin-script.c: In function ‘process_auxtrace_error’:
util/auxtrace.h:708:57: error: called object is not a function or function pointer
708 | #define perf_event__process_auxtrace_error 0
| ^
builtin-script.c:2443:16: note: in expansion of macro ‘perf_event__process_auxtrace_error’
2443 | return perf_event__process_auxtrace_error(session, event);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
MKDIR /tmp/tmp.rGrdpQlTCr/tests/
MKDIR /tmp/tmp.rGrdpQlTCr/bench/
CC /tmp/tmp.rGrdpQlTCr/tests/builtin-test.o
CC /tmp/tmp.rGrdpQlTCr/bench/sched-messaging.o
builtin-script.c:2444:1: error: control reaches end of non-void function [-Werror=return-type]
2444 | }
| ^
To: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Allow perf script to find a script in the exec path.
Example:
Before:
$ perf record -a -e intel_pt/branch=0/ sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.954 MB perf.data ]
$ perf script intel-pt-events.py 2>&1 | head -3
Error: Couldn't find script `intel-pt-events.py'
See perf script -l for available scripts.
$ perf script -s intel-pt-events.py 2>&1 | head -3
Can't open python script "intel-pt-events.py": No such file or directory
$ perf script ~/libexec/perf-core/scripts/python/intel-pt-events.py 2>&1 | head -3
Error: Couldn't find script `/home/ahunter/libexec/perf-core/scripts/python/intel-pt-events.py'
See perf script -l for available scripts.
$
After:
$ perf script intel-pt-events.py 2>&1 | head -3
Intel PT Power Events and PTWRITE
perf 8123/8123 [000] 551.230753986 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
perf 8123/8123 [001] 551.230808216 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
$ perf script -s intel-pt-events.py 2>&1 | head -3
Intel PT Power Events and PTWRITE
perf 8123/8123 [000] 551.230753986 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
perf 8123/8123 [001] 551.230808216 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
$ perf script ~/libexec/perf-core/scripts/python/intel-pt-events.py 2>&1 | head -3
Intel PT Power Events and PTWRITE
perf 8123/8123 [000] 551.230753986 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
perf 8123/8123 [001] 551.230808216 cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
$
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210524065718.11421-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The option "opts->full_auxtrace" is checked at the earlier place, if it
is false the function will directly bail out. So remove the redundant
checking for "opts->full_auxtrace".
Suggested-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For per-cpu mmap, it should enable timestamp tracing for Arm SPE; this
is helpful for samples correlation.
To automatically enable the timestamp, a helper arm_spe_set_timestamp()
is introduced for setting "ts_enable" format bit.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210519041546.1574961-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dummy event is mainly used for mmap, the TIME sample is only needed
for per-cpu case so that the perf tool can rely on the correct timing
for parsing symbols. And the CPU sample is useless for mmap.
The BRANCH_STACK sample bit will be always reset for the dummy event in
the function evsel__config(), so don't need to repeatedly reset it for
Arm SPE specific.
So this patch only enables TIME sample for per-cpu mmap.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now it's hard code to set sample flags for CPU, TIME and TID for SPE
event, which is pointless.
The CPU is useful for sampling only for per-mmap case, it is used to
indicate the AUX trace is associated to which CPU.
The TIME sample is not needed for AUX event, since the time for AUX
event is not really used and this time is a different thing from the
timestamp in Arm SPE trace, the timestamp tracing which is controlled
by Arm SPE's config bit.
The TID sample is not useful for AUX event.
This patch corrects the sample flags for SPE event, it only set CPU
sample bit for per-cpu mmap case.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519041546.1574961-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
- Update core and uncore events for Icelake client to perf.
- Add ICL metrics.
Based on ICL event list v1.10:
https://download.01.org/perfmon/ICL/
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON metrics for Icelake Server to perf.
Based on TMA metrics 4.21 at 01.org.:
https://download.01.org/perfmon/
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON uncore events for Icelake Server to perf.
Based on JSON list v1.04:
https://download.01.org/perfmon/ICX/
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add JSON core events for Icelake Server to perf.
Based on JSON list v1.04:
https://download.01.org/perfmon/ICX/
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c0f27643-bebb-2912-56ed-f7abec7dbde3@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes from perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
LLVM patch https://reviews.llvm.org/D102712
narrowed the scope of existing R_BPF_64_64
and R_BPF_64_32 relocations, and added three
new relocations, R_BPF_64_ABS64, R_BPF_64_ABS32
and R_BPF_64_NODYLD32. The main motivation is
to make relocations linker friendly.
This change, unfortunately, breaks libbpf build,
and we will see errors like below:
libbpf: ELF relo #0 in section #6 has unexpected type 2 in
/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o
Error: failed to link
'/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o':
Unknown error -22 (-22)
The new relocation R_BPF_64_ABS64 is generated
and libbpf linker sanity check doesn't understand it.
Relocation section '.rel.struct_ops' at offset 0x1410 contains 1 entries:
Offset Info Type Symbol's Value Symbol's Name
0000000000000018 0000000700000002 R_BPF_64_ABS64 0000000000000000 nogpltcp_init
Look at the selftests/bpf/bpf_tcp_nogpl.c,
void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
{
}
SEC(".struct_ops")
struct tcp_congestion_ops bpf_nogpltcp = {
.init = (void *)nogpltcp_init,
.name = "bpf_nogpltcp",
};
The new llvm relocation scheme categorizes 'nogpltcp_init' reference
as R_BPF_64_ABS64 instead of R_BPF_64_64 which is used to specify
ld_imm64 relocation in the new scheme.
Let us fix the linker sanity checking by including
R_BPF_64_ABS64 and R_BPF_64_ABS32. There is no need to
check R_BPF_64_NODYLD32 which is used for .BTF and .BTF.ext.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210522162341.3687617-1-yhs@fb.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix 'perf script' decoding of Intel PT traces for abort handling and
sample instruction bytes.
- Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
'perf script' decoder.
- Fixes for the python based Intel PT trace viewer GUI.
- Sync UAPI copies (unwire quotactl_path, some comment fixes).
- Fix handling of missing kernel software events, such as the recently
added 'cgroup-switches', and add the trivial glue for it in the
tooling side, since it was added in this merge window.
- Add missing initialization of zstd_data in 'perf buildid-list',
detected with valgrind's memcheck.
- Remove needless event enable/disable when all events uses BPF.
- Fix libpfm4 support (63) test error for nested event groups.
* tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Skip evlist__[enable|disable] when all events uses BPF
perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit
perf scripts python: exported-sql-viewer.py: Fix warning display
perf scripts python: exported-sql-viewer.py: Fix Array TypeError
perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
tools headers UAPI: Sync files changed by the quotactl_path unwiring
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
perf parse-events: Check if the software events array slots are populated
perf tools: Add 'cgroup-switches' software event
perf intel-pt: Remove redundant setting of ptq->insn_len
perf intel-pt: Fix sample instruction bytes
perf intel-pt: Fix transaction abort handling
perf test: Fix libpfm4 support (63) test error for nested event groups
tools arch kvm: Sync kvm headers with the kernel sources
perf buildid-list: Initialize zstd_data
|
|
Add bpf selftests and extend existing ones for a new function
bpf_lookup_and_delete_elem() for (percpu) hash and (percpu) LRU hash map
types.
In test_lru_map and test_maps we add an element, lookup_and_delete it,
then check whether it's deleted.
The newly added lookup_and_delete prog tests practically do the same
thing but additionally use a BPF program to change the value of the
element for LRU maps.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/d30d3e0060c1f750e133579623cf1c60ff58f3d9.1620763117.git.denis.salopek@sartura.hr
|
|
Add bpf_map_lookup_and_delete_elem_flags() libbpf API in order to use
the BPF_F_LOCK flag with the map_lookup_and_delete_elem() function.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/15b05dafe46c7e0750d110f233977372029d1f62.1620763117.git.denis.salopek@sartura.hr
|
|
Extend the existing bpf_map_lookup_and_delete_elem() functionality to
hashtab map types, in addition to stacks and queues.
Create a new hashtab bpf_map_ops function that does lookup and deletion
of the element under the same bucket lock and add the created map_ops to
bpf.h.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/4d18480a3e990ffbf14751ddef0325eed3be2966.1620763117.git.denis.salopek@sartura.hr
|
|
I'm getting the following error when running 'gen skeleton -L' as
regular user:
libbpf: Error in bpf_object__probe_loading():Operation not permitted(1).
Couldn't load trivial BPF program. Make sure your kernel supports BPF
(CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough
value.
Fixes: 67234743736a ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210521030653.2626513-1-sdf@google.com
|
|
|
|
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
This reverts commit bb2f930d6dd708469a587dc9ed1efe1ef969c0bf.
[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/
CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6dd7 ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
|
|
Clean up the following includecheck warning:
./tools/testing/selftests/powerpc/tm/tm-vmx-unavail.c: pthread.h is
included more than once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1620903820-68213-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix short log indentation for tools builds
- Fix dummy-tools to adjust to the latest stackprotector check
* tag 'kbuild-fixes-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: dummy-tools: adjust to stricter stackprotector check
scripts/jobserver-exec: Fix a typo ("envirnoment")
tools build: Fix quiet cmd indentation
|
|
GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.
However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].
Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.
Link: https://lore.kernel.org/lkml/42b4342b-aefc-a16a-0d43-9f9c0d63ba7a@rasmusvillemoes.dk [0]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=19449 [1]
Link: https://lore.kernel.org/lkml/1ac7bbc2-45d9-26ed-0b33-bf382b8d858b@I-love.SAKURA.ne.jp [2]
Link: https://lkml.kernel.org/r/20210511203716.117010-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com
Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: Chris Kennelly <ckennelly@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Function declarations don't need __maybe_unused annotations, only the
implementations do. Drop them on the perf x86 tests.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: masayoshi mizuma <msys.mizuma@gmail.com>
Link: http://lore.kernel.org/lkml/20210513174614.2242210-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no reason for making the test__arch_unwind_sample declaration per
arch. Currently that's done 2 different ways either with a declaration in
arch-tests.h or with an arch define. Unify all this with an unconditional
declaration in tests.h.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: masayoshi mizuma <msys.mizuma@gmail.com>
Link: http://lore.kernel.org/lkml/20210513174614.2242210-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When all events of a perf-stat session use BPF, it is not necessary to
call evlist__enable() and evlist__disable(). Skip them when
all_counters_use_bpf is true.
Signed-off-by: Song Liu <song@kernel.org>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
clang is required to build perf with BUILD_BPF_SKEL=1. Improve the
error message to highlight that:
1) clang could be either missing or too old;
2) clang is only required with BUILD_BPF_SKEL=1.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add 'g' (guest) for VM-Entry and 'h' (host) for VM-Exit.
Fixes: c025d46cd932c ("perf script: Add branch types for VM-Entry and VM-Exit")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210521175127.27264-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
