| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
|
|
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
|
|
The syscalls that were consistently observed were set_robust_list and
rseq. This is because perf cannot find their child process.
This change ensures that the return value is always printed.
Before:
0.256 ( 0.001 ms): set_robust_list(head: 0x7f09c77dba20, len: 24) =
0.259 ( 0.001 ms): rseq(rseq: 0x7f09c77dc0e0, rseq_len: 32, sig: 1392848979) =
After:
0.270 ( 0.002 ms): set_robust_list(head: 0x7f0bb14a6a20, len: 24) = 0
0.273 ( 0.002 ms): rseq(rseq: 0x7f0bb14a70e0, rseq_len: 32, sig: 1392848979) = 0
Committer notes:
As discussed in the thread in the Link: tag below, these two don't
return a pid, but for syscalls returning one, we need to print the
result and if we manage to find the children in 'perf trace' data
structures, then print its name as well.
Fixes: 11c8e39f5133aed9 ("perf trace: Infrastructure to show COMM strings for syscalls returning PIDs")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403160411.159238-2-ashelat@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Print out the collision flag for AUX trace data. This is helpful for
inspecting sample collisions.
After:
0x217b60@/data_nvme1n1/niayan01/upstream/perf.data [0x40]: event: 11
.
. ... raw event: size 64 bytes
. 0000: 0b 00 00 00 00 00 40 00 d2 ef 3f 00 00 00 00 00 ......@...?.....
. 0010: ff 0f 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
. 0020: 1c 01 00 00 1c 01 00 00 10 bf 38 d6 11 01 00 00 ..........8.....
. 0030: 03 00 00 00 00 00 00 00 06 00 00 00 00 00 00 00 ................
3 1176120114960 0x217b60 [0x40]: PERF_RECORD_AUX offset: 0x3fefd2 size: 0xfff flags: 0x8 [C]
The added character '[C]' indicates the collision.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250528153519.188644-1-leo.yan@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently the output sums up to 100% for each entry. But it can be
confusing when it's displayed with 'overhead'.
Before:
$ perf mem report -F overhead,sample,cache,comm
...
# -------------- Cache --------------
# Overhead Samples L1 L2 L3 L1-buf Other Command
# ........ ............ ................................... ...............
#
25.38% 517 34.6% 0.0% 15.8% 23.3% 26.2% swapper
9.03% 239 35.4% 0.8% 9.1% 22.1% 32.6% chrome
8.61% 233 45.3% 1.2% 8.9% 22.7% 21.9% Chrome_ChildIOT
7.81% 189 33.6% 0.4% 5.5% 35.9% 24.6% Isolated Web Co
3.73% 103 40.4% 0.3% 2.7% 39.4% 17.2% gnome-shell
Let's convert it to use absolute percent value so that it can add up to
the overhead for that entry.
After:
# -------------- Cache --------------
# Overhead Samples L1 L2 L3 L1-buf Other Command
# ........ ............ ................................... ...............
#
25.38% 517 8.8% 0.0% 4.0% 5.9% 6.7% swapper
9.03% 239 3.2% 0.1% 0.8% 2.0% 2.9% chrome
8.61% 233 3.9% 0.1% 0.8% 2.0% 1.9% Chrome_ChildIOT
7.81% 189 2.6% 0.0% 0.4% 2.8% 1.9% Isolated Web Co
3.73% 103 1.5% 0.0% 0.1% 1.5% 0.6% gnome-shell
This aligns well with the existing 'mem' sort key.
$ perf mem report -s comm,mem -H
...
#
# Overhead Samples Command / Memory access
# ......................... ..........................................
#
25.38% 517 swapper
8.78% 150 L1 hit
6.66% 72 RAM hit
5.92% 137 LFB/MAB hit
4.02% 157 L3 hit
0.00% 1 L3 miss
9.03% 239 chrome
3.19% 117 L1 hit
2.94% 35 RAM hit
1.99% 48 LFB/MAB hit
0.82% 32 L3 hit
0.08% 5 L2 hit
0.00% 2 L3 miss
We can add an option or a config to change the setting later.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20250523222157.1259998-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
IOW it's not used when -F option is used alone. Let's make it
conditional to skip printing incorrect information.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20250523222157.1259998-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Unlike perf-report which uses sample period for overhead calculation,
perf-mem overhead is calculated using sample weight. Describe perf-mem
overhead calculation method in it's man page.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20250523222157.1259998-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The comment of "--user-regs" option is not correct, fix it.
"on interrupt," -> "in user space,"
Fixes: 84c417422798c897 ("perf record: Support direct --user-regs arguments")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403060810.196028-1-dapeng1.mi@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 8f454c95817d15ee529d58389612ea4b34f5ffb3.
'perf top' is freezing on exit sometimes, bisected to this one, revert.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Fei Lang <langfei@huawei.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/aDcyvvOKZkRYbjul@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- selftest fixes for arm32 (Neill Kapron, Terry Tritton)
- documentation typo fix (Sumanth Gavini)
* tag 'seccomp-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: seccomp: Fix "performace" to "performance"
selftests/seccomp: fix negative_ENOSYS tracer tests on arm32
selftests/seccomp: fix syscall_restart test for arm compat
|
|
If perf is built without libbpf (e.g. NO_LIBBPF=1) then the
--bpf-summary perf trace tests will fail.
Skip the tests as this is expected behavior.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250528032637.198960-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
jitdump support is only present if building with libelf.
Skip the intel-pt jitdump test if perf isn't compiled with libelf
support.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250528032637.198960-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Reading through the evsel->evlist may seg fault if a sample arrives
when the evlist is being deleted.
Detect this case and ignore samples arriving when the evlist is being
deleted.
Fixes: bcfab08db7fb38bf ("perf intel-tpebs: Filter non-workload samples")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250528032637.198960-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The buffer returned by dso__demangle_sym() may be NULL, don't segv in
strcmp if this happens.
Currently this happens for NO_LIBELF=1 builds.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250528032637.198960-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The same buf is used for the program headers and reading notes. As the
notes memory may be reallocated then this corrupts the memory pointed
to by the phdr. Using the same buffer is in any case a logic
error. Rather than deal with the duplicated code, introduce an elf32
boolean and a union for either the elf32 or elf64 headers that are in
use. Let the program headers have their own memory and grow the buffer
for notes as necessary.
Before `perf list -j` compiled with asan would crash with:
```
==4176189==ERROR: AddressSanitizer: heap-use-after-free on address 0x5160000070b8 at pc 0x555d3b15075b bp 0x7ffebb5a8090 sp 0x7ffebb5a8088
READ of size 8 at 0x5160000070b8 thread T0
#0 0x555d3b15075a in filename__read_build_id tools/perf/util/symbol-minimal.c:212:25
#1 0x555d3ae43aff in filename__sprintf_build_id tools/perf/util/build-id.c:110:8
...
0x5160000070b8 is located 312 bytes inside of 560-byte region [0x516000006f80,0x5160000071b0)
freed by thread T0 here:
#0 0x555d3ab21840 in realloc (perf+0x264840) (BuildId: 12dff2f6629f738e5012abdf0e90055518e70b5e)
#1 0x555d3b1506e7 in filename__read_build_id tools/perf/util/symbol-minimal.c:206:11
...
previously allocated by thread T0 here:
#0 0x555d3ab21423 in malloc (perf+0x264423) (BuildId: 12dff2f6629f738e5012abdf0e90055518e70b5e)
#1 0x555d3b1503a2 in filename__read_build_id tools/perf/util/symbol-minimal.c:182:9
...
```
Note: this bug is long standing and not introduced by the other asan
fix in commit fa9c4977fbfb ("perf symbol-minimal: Fix double free in
filename__read_build_id").
Fixes: b691f64360ecec49 ("perf symbols: Implement poor man's ELF parser")
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250528032637.198960-2-irogers@google.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The pmu name or alias_name fields may be NULL and should be skipped if
so. This is done in all loops of perf_pmu___name_match except the
final wildcard loop which was an oversight.
Fixes: 63e287131cf0c59b ("perf pmu: Rename name matching for no suffix or wildcard variants")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250527215035.187992-1-irogers@google.com
[ Fixup the Fixes: tag to the right commit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out for use in places other than the dwarf unwinding tests for
libunwind.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250313052952.871958-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge in late fixes to prepare for the 6.16 net-next PR.
No conflicts nor adjacent changes.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On linux-next, build for bpf selftest displays a warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'.
Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers")
changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H
in include/uapi/linux/if_xdp.h.
To resolve the warning, update tools/include/uapi/linux/if_xdp.h
to align with the changes in include/uapi/linux/if_xdp.h
Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250527054138.1086006-1-skb99@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The script is supposed to skip wildcard interface testing if unsupported
by the host's nft tool. The failing check caused script abort due to
'set -e' though. Fix this by running the potentially failing nft command
inside the if-conditional pipe.
Fixes: 73db1b5dab6f ("selftests: netfilter: Torture nftables netdev hooks")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20250527094117.18589-1-phil@nwl.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
enqueue behaviour on netem
Reproduce the UAF scenario where netem is a child of HFSC and HFSC
is configured to use the eltree. In such case, this TDC test would
cause the HFSC class to be added to the eltree twice resulting
in a UAF.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250522181448.1439717-3-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- More in-kernel idle CPU selection improvements. Expand topology
awareness coverage add scx_bpf_select_cpu_and() to allow more
flexibility. The idle CPU selection kfuncs can now be called from
unlocked contexts too.
- A bunch of reorganization changes to lay the foundation for multiple
hierarchical scheduler support. This isn't ready yet and the included
changes don't make meaningful behavior differences. One notable
change is replacing some static_key tests with dynamic tests as the
test results may differ depending on the scheduler instance. This
isn't expected to cause meaningful performance difference.
- Other minor and doc updates.
- There were multiple patches in for-6.15-fixes which conflicted with
changes in for-6.16. for-6.15-fixes were pulled three times into
for-6.16 to resolve the conflicts.
* tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (49 commits)
sched_ext: Call ops.update_idle() after updating builtin idle bits
sched_ext, docs: convert mentions of "CFS" to "fair-class scheduler"
selftests/sched_ext: Update test enq_select_cpu_fails
sched_ext: idle: Consolidate default idle CPU selection kfuncs
selftests/sched_ext: Add test for scx_bpf_select_cpu_and() via test_run
sched_ext: idle: Allow scx_bpf_select_cpu_and() from unlocked context
sched_ext: idle: Validate locking correctness in scx_bpf_select_cpu_and()
sched_ext: Make scx_kf_allowed_if_unlocked() available outside ext.c
sched_ext, docs: add label
sched_ext: Explain the temporary situation around scx_root dereferences
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Cleanup [__]scx_exit/error*()
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Clean up scx_root usages
Documentation: scheduler: Changed lowercase acronyms to uppercase
sched_ext: Avoid NULL scx_root deref in __scx_exit()
sched_ext: Add RCU protection to scx_root in DSQ iterator
sched_ext: Clean up SCX_EXIT_NONE handling in scx_disable_workfn()
sched_ext: Move disable machinery into scx_sched
sched_ext: Move event_stats_cpu into scx_sched
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
|
|
This variable is unused and can be removed.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
fix 5-tuple
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This exit_wait seems necessary to make the rx side test pass for me.
I think this is just missed from the original test add patch. Add it now.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
message
Paolo Abeni says:
Recently the nipa CI infra went through some tuning, and the mentioned
self-test now often fails.
The failing test is the sctp+nfqueue one, where the file transfer takes
too long and hits the timeout (1 minute).
Because SCTP nfqueue tests had timeout related issues before (esp. on debug
kernels) print the file transfer duration in the PASS/FAIL message.
This would aallow us to see if there is/was an unexpected slowdown
(CI keeps logs around) or 'creeping slowdown' where things got slower
over time until 'fail point' was reached.
Output of altered lines looks like this:
PASS: tcp and nfqueue in forward chan (duration: 2s)
PASS: tcp via loopback (duration: 2s)
PASS: sctp and nfqueue in forward chain (duration: 42s)
PASS: sctp and nfqueue in output chain with GSO (duration: 21s)
Reported-by: Paolo Abeni <pabeni@redhat.com
Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the Python YNL extack decoding to handle sub-messages in the same
way that YNL C does. This involves retaining the input values so that
they are available during extack decoding.
./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \
--json '{
"linkinfo": {"kind": "netkit", "data": {"policy": 10} }
}'
Netlink error: Invalid argument
nl_len = 92 (76) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"The most significant part of these changes is an ACPICA update
covering two upstream ACPICA releases, 20241212 and 20250404, that
have not been included into the kernel code base yet.
Among other things, it adds definitions needed to address GCC 15's
-Wunterminated-string-initialization warnings, adds support for three
new tables (MRRM, ERDT, RIMT), extends support for two tables (RAS2,
DMAR), and fixes some issues.
On top of the above, there is a new parser for the MRRM table, more
changes related to GCC 15's -Wunterminated-string-initialization
warnings, a CPPC library update including functions related to
autonomous CPU performance state selection, a couple of new quirks,
some assorted fixes and some code cleanups.
Specifics:
- Fix two ACPICA SLAB cache leaks (Seunghun Han)
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification
and the code (Zaid Alali)
- Fix typo in comments for SRAT structures (Adam Lackorzynski)
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre)
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin)
- Add support for printing AML arguments when the ACPICA debug level
is ACPI_LV_TRACE_POINT (Mario Limonciello)
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla)
- Apply pack(1) to union aml_resource (Tamir Duberstein)
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk)
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman)
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck)
- Add definitions for RIMT to ACPICA (Sunil V L)
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King)
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck)
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem)
- Rename structure and field names of the RAS2 table in actbl2.h
(Shiju Jose)
- Fix up whitespace in acpica/utcache.c (Zhe Qiao)
- Avoid sequence overread in a call to strncmp() in
ap_get_table_length() and replace strncpy() with memcpy() in ACPICA
in some places (Ahmed Salem)
- Update copyright year in all ACPICA files (Saket Dumbre)
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook)
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil
Keshavamurthy)
- Remove an (explicitly) unused header file include from the VIOT
ACPI table parser file (Andy Shevchenko)
- Improve logging around acpi_initialize_tables() (Bartosz
Szczepanek)
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui)
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich)
- Simplify PCC shared memory region handling (Sudeep Holla)
- Rework and extend functions for reading CPPC register values and
for updating CPPC registers (Lifeng Zheng)
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng)
- Turn the acpi_pci_root_remap_iospace() fwnode_handle parameter into
a const pointer (Pei Xiao)
- Round battery capacity percengate in the ACPI battery driver to the
closest integer to avoid user confusion (shitao)
- Make the ACPI battery driver report the current as a negative
number to the power supply framework when the battery is
discharging as documented (Peter Marheine)
- Add TUXEDO InfinityBook Pro AMD Gen9 to the acpi_ec_no_wakeup[]
list to prevent spurious wakeups from suspend-to-idle (Werner
Sembach)
- Convert the APEI EINJ driver to a faux device one (Sudeep Holla,
Jon Hunter)
- Remove redundant calls to einj_get_available_error_type() from the
APEI EINJ driver (Zaid Alali)
- Fix a typo for MECHREVO in irq1_edge_low_force_override[] (Mingcong
Bai)
- Add an LPS0 check() callback to the AMD pinctrl driver and fix up
config symbol dependencies in it (Mario Limonciello, Rafael
Wysocki)
- Avoid initializing the ACPI platform profile driver on non-ACPI
platforms (Alexandre Ghiti)
- Document that references to ACPI data (non-device) nodes should use
string-only references in hierarchical data node packages (Sakari
Ailus)
- Fail the ACPI bus registration if acpi_kobj registration fails
(Armin Wolf)"
* tag 'acpi-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
ACPI: MRRM: Fix default max memory region
ACPI: bus: Bail out if acpi_kobj registration fails
ACPI: platform_profile: Avoid initializing on non-ACPI platforms
pinctrl: amd: Fix hibernation support with CONFIG_SUSPEND unset
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
|
|
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
|
|
The kernel v6.14 added 'swfilt' to support privilege filtering in
software so that IBS can be used by regular users. Add a test case in
x86 to verify the behavior.
$ sudo perf test -vv 'IBS software filter'
113: AMD IBS software filtering:
--- start ---
test child forked, pid 178826
check availability of IBS swfilt
run perf record with modifier and swfilt
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
check number of samples with swfilt
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.037 MB - ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.041 MB - ]
---- end(0) ----
113: AMD IBS software filtering : Ok
Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a 9950x3d
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250524002754.1266681-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
L2 HITM is not counted in c2c statistic decoding. Count it for lcl_hitm
like how we handle L2 Peer snoop.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: CaiJingtao <caijingtao@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yushan Wang <wangyushan12@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: xueshan2@huawei.com
Link: https://lore.kernel.org/r/20250425033845.57671-4-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add data source encoding for HiSilicon HIP12 and coresponding mapping
to the perf's memory data source. This will help to synthesize the data
and support upper layer tools like perf-mem and perf-c2c.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Cc: CaiJingtao <caijingtao@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Yushan Wang <wangyushan12@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Cc: xueshan2@huawei.com
Link: https://lore.kernel.org/r/20250425033845.57671-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull lkmm updates from Paul McKenney:
"Update LKMM documentation:
- Cross-references, typos, broken URLs (Akira Yokosawa)
- Clarify SRCU explanation (Uladzislau Rezki)"
* tag 'lkmm.2025.05.25a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/memory-model/Documentation: Fix SRCU section in explanation.txt
tools/memory-model: docs/references: Remove broken link to imgtec.com
tools/memory-model: docs/ordering: Fix trivial typos
tools/memory-model: docs/simple.txt: Fix trivial typos
tools/memory-model: docs/README: Update introduction of locking.txt
|
|
Now that support for up to 12 args is enabled for tracing programs on
ARM64, enable the existing tests for this feature on this architecture.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-2-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch exposes the btf_custom_path feature to bpftool, allowing users
to specify a custom BTF file when loading BPF programs using prog load or
prog loadall commands.
The argument 'btf_custom_path' in libbpf is used for those kernels that
don't have CONFIG_DEBUG_INFO_BTF enabled but still want to perform CO-RE
relocations.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250516144708.298652-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add some inline-asm tests and C tests where __bpf_trap() or
__builtin_trap() is used in the code. The __builtin_trap()
test is guarded with llvm21 ([1]) since otherwise the compilation
failure will happen.
[1] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205331.1291734-1-yonghong.song@linux.dev
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Use the same test buffers as the traditional iterator and a new BPF map
to verify the test buffers can be found with the open coded dmabuf
iterator.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-6-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test creates a udmabuf, and a dmabuf from the system dmabuf heap,
and uses a BPF program that prints dmabuf metadata with the new
dmabuf_iter to verify they can be found.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-5-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
|
|
KVM x86 misc changes for 6.16:
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
- Advertise support to userspace for WRMSRNS and PREFETCHI.
- Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
- Add a module param to control and enumerate support for device posted
interrupts.
- Misc cleanups.
|
