Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
|
|
Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
testing
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
|
|
Pull bpf fixes from Alexei Starovoitov:
"Two small fixes to selftests"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix selftest btf_tag/btf_type_tag_percpu_vmlinux_helper failure
selftests/bpf: Fix bpf selftest build error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
"perf report/top/annotate TUI:
- Accept the left arrow key as a Zoom out if done on the first column
- Show if source code toggle status in title, to help spotting bugs
with the various disassemblers (capstone, llvm, objdump)
- Provide feedback on unhandled hotkeys
Build:
- Better inform when certain features are not available with warnings
in the build process and in 'perf version --build-options' or 'perf -vv'
perf record:
- Improve the --off-cpu code by synthesizing events for switch-out ->
switch-in intervals using a BPF program. This can be fine tuned
using a --off-cpu-thresh knob
perf report:
- Add 'tgid' sort key
perf mem/c2c:
- Add 'op', 'cache', 'snoop', 'dtlb' output fields
- Add support for 'ldlat' on AMD IBS (Instruction Based Sampling)
perf ftrace:
- Use process/session specific trace settings instead of messing with
the global ftrace knobs
perf trace:
- Implement syscall summary in BPF
- Support --summary-mode=cgroup
- Always print return value for syscalls returning a pid
- The rseq and set_robust_list don't return a pid, just -errno
perf lock contention:
- Symbolize zone->lock using BTF
- Add -J/--inject-delay option to estimate impact on application
performance by optimization of kernel locking behavior
perf stat:
- Improve hybrid support for the NMI watchdog warning
Symbol resolution:
- Handle 'u' and 'l' symbols in /proc/kallsyms, resolving some Rust
symbols
- Improve Rust demangler
Hardware tracing:
Intel PT:
- Fix PEBS-via-PT data_src
- Do not default to recording all switch events
- Fix pattern matching with python3 on the SQL viewer script
arm64:
- Fixups for the hip08 hha PMU
Vendor events:
- Update Intel events/metrics files for alderlake, alderlaken,
arrowlake, bonnell, broadwell, broadwellde, broadwellx,
cascadelakex, clearwaterforest, elkhartlake, emeraldrapids,
grandridge, graniterapids, haswell, haswellx, icelake, icelakex,
ivybridge, ivytown, jaketown, lunarlake, meteorlake, nehalemep,
nehalemex, rocketlake, sandybridge, sapphirerapids, sierraforest,
skylake, skylakex, snowridgex, tigerlake, westmereep-dp,
westmereep-sp, westmereep-sx
python support:
- Add support for event counts in the python binding, add a
counting.py example
perf list:
- Display the PMU name associated with a perf metric in JSON
perf test:
- Hybrid improvements for metric value validation test
- Fix LBR test by ignoring idle task
- Add AMD IBS sw filter ana d'ldlat' tests
- Add 'perf trace --summary-mode=cgroup' test
- Add tests for the various language symbol demanglers
Miscellaneous:
- Allow specifying the cpu an event will be tied using '-e
event/cpu=N/'
- Sync various headers with the kernel sources
- Add annotations to use clang's -Wthread-safety and fix some
problems it detected
- Make dump_stack() use perf's symbol resolution to provide better
backtraces
- Intel TPEBS support cleanups and fixes. TPEBS stands for Timed PEBS
(Precision Event-Based Sampling), that adds timing info, the
retirement latency of instructions
- Various memory allocation (some detected by ASAN) and reference
counting fixes
- Add a 8-byte aligned PERF_RECORD_COMPRESSED2 to replace
PERF_RECORD_COMPRESSED
- Skip unsupported event types in perf.data files, don't stop when
finding one
- Improve lookups using hashmaps and binary searches"
* tag 'perf-tools-for-v6.16-1-2025-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (206 commits)
perf callchain: Always populate the addr_location map when adding IP
perf lock contention: Reject more than 10ms delays for safety
perf trace: Set errpid to false for rseq and set_robust_list
perf symbol: Move demangling code out of symbol-elf.c
perf trace: Always print return value for syscalls returning a pid
perf script: Print PERF_AUX_FLAG_COLLISION flag
perf mem: Show absolute percent in mem_stat output
perf mem: Display sort order only if it's available
perf mem: Describe overhead calculation in brief
perf record: Fix incorrect --user-regs comments
Revert "perf thread: Ensure comm_lock held for comm_list"
perf test trace_summary: Skip --bpf-summary tests if no libbpf
perf test intel-pt: Skip jitdump test if no libelf
perf intel-tpebs: Avoid race when evlist is being deleted
perf test demangle-java: Don't segv if demangling fails
perf symbol: Fix use-after-free in filename__read_build_id
perf pmu: Avoid segv for missing name/alias_name in wildcarding
perf machine: Factor creating a "live" machine out of dwarf-unwind
perf test: Add AMD IBS sw filter test
perf mem: Count L2 HITM for c2c statistic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Support for Virtual Trust Level (VTL) on arm64 (Roman Kisel)
- Fixes for Hyper-V UIO driver (Long Li)
- Fixes for Hyper-V PCI driver (Michael Kelley)
- Select CONFIG_SYSFB for Hyper-V guests (Michael Kelley)
- Documentation updates for Hyper-V VMBus (Michael Kelley)
- Enhance logging for hv_kvp_daemon (Shradha Gupta)
* tag 'hyperv-next-signed-20250602' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (23 commits)
Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests
Drivers: hv: vmbus: Add comments about races with "channels" sysfs dir
Documentation: hyperv: Update VMBus doc with new features and info
PCI: hv: Remove unnecessary flex array in struct pci_packet
Drivers: hv: Remove hv_alloc/free_* helpers
Drivers: hv: Use kzalloc for panic page allocation
uio_hv_generic: Align ring size to system page
uio_hv_generic: Use correct size for interrupt and monitor pages
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary
arch/x86: Provide the CPU number in the wakeup AP callback
x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
PCI: hv: Get vPCI MSI IRQ domain from DeviceTree
ACPI: irq: Introduce acpi_get_gsi_dispatcher()
Drivers: hv: vmbus: Introduce hv_get_vmbus_root_device()
Drivers: hv: vmbus: Get the IRQ number from DeviceTree
dt-bindings: microsoft,vmbus: Add interrupt and DMA coherence properties
arm64, x86: hyperv: Report the VTL the system boots in
arm64: hyperv: Initialize the Virtual Trust Level field
Drivers: hv: Provide arch-neutral implementation of get_vtl()
Drivers: hv: Enable VTL mode for arm64
...
|
|
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6abab6 ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6abab6 ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
|
|
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff6374 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit a571a9a1b120264e24b41eddf1ac5140131bfa84.
The commit in question breaks kunit for older compilers:
$ gcc --version
gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-5)
$ ./tools/testing/kunit/kunit.py run --alltests --json --arch=x86_64
Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=x86_64 O=.kunit olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_INIT_STACK_ALL_PATTERN=y
Link: https://lore.kernel.org/20250529083811.778bc31b@kernel.org
Fixes: a571a9a1b120 ("kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250530135800.13437-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Allow overriding CFLAGS and LDFLAGS for tools/bootconfig, for example
making it a static binary.
* tag 'bootconfig-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: specify LDFLAGS as an argument to CC
tools/bootconfig: allow overriding CFLAGS assignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
|
|
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
|
|
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On linux-next, build for bpf selftest displays an error due to
mismatch in the expected function signature of bpf_testmod_test_read
and bpf_testmod_test_write.
Commit 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
changed the required type for struct bin_attribute to const struct bin_attribute.
To resolve the error, update corresponding signature for the callback.
Fixes: 97d06802d10a ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/e915da49-2b9a-4c4c-a34f-877f378129f6@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512091108.2015615-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The gup_longterm test fails to follow this pattern,
it runs a single test function repeatedly with various parameters but each
result report is a string logging an error message which is fixed between
runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-4-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The cow test completely fails to follow this
pattern, it runs test functions repeatedly with various parameters with
each result report from those functions being a string logging an error
message which is fixed between runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-3-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Several of the MM tests have a pattern of printing a description of the
test to be run then reporting the actual TAP result using a generic string
not connected to the specific test, often in a shared function used by
many tests. The name reported typically varies depending on the specific
result rather than the test too. This causes problems for tooling that
works with test results, the names reported with the results are used to
deduplicate tests and track them between runs so both duplicated names and
changing names cause trouble for things like UIs and automated bisection.
As a first step towards matching these tests better with the expectations
of kselftest provide helpers which record the test name as part of the
initial print and then use that as part of reporting a result.
This is not added as a generic kselftest helper partly because the use of
a variable to store the test name doesn't fit well with the header only
implementation of kselftest.h and partly because it's not really an
intended pattern. Ideally at some point the mm tests that use it will be
updated to not need it.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-2-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: cow and gup_longterm cleanups", v2.
The bulk of these changes modify the cow and gup_longterm tests to report
unique and stable names for each test, bringing them into line with the
expectations of tooling that works with kselftest. The string reported as
a test result is used by tooling to both deduplicate tests and track tests
between test runs, using the same string for multiple tests or changing
the string depending on test result causes problems for user interfaces
and automation such as bisection.
It was suggested that converting to use kselftest_harness.h would be a
good way of addressing this, however that really wants the set of tests to
run to be known at compile time but both test programs dynamically
enumarate the set of huge page sizes the system supports and test each.
Refactoring to handle this would be even more invasive than these changes
which are large but straightforward and repetitive.
A version of the main gup_longterm cleanup was previously sent separately,
this version factors out the helpers for logging the start of the test
since the cow test looks very similar.
This patch (of 4):
The cow and gup_longterm test programs open code something that looks a
lot like the standard ksft_finished() helper to summarise the test results
and provide an exit code, convert to use ksft_finished().
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-0-ff198df8e38e@kernel.org
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-1-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_DAMON_SYSFS is disabled, the selftests fail with the following
outputs,
not ok 2 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py # exit=1
not ok 3 selftests: damon: damos_quota.py # exit=1
not ok 4 selftests: damon: damos_quota_goal.py # exit=1
not ok 5 selftests: damon: damos_apply_interval.py # exit=1
not ok 6 selftests: damon: damos_tried_regions.py # exit=1
not ok 7 selftests: damon: damon_nr_regions.py # exit=1
not ok 11 selftests: damon: sysfs_update_schemes_tried_regions_hang.py # exit=1
The root cause of this issue is that all the testcases above do not check
the sysfs interface of DAMON whether it exists or not. With this patch
applied, all the testcases above now pass successfully.
Link: https://lkml.kernel.org/r/20250531093937.1555159-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Check if "procmap_out->fd" is negative instead of "procmap_out" (which is
a pointer).
Link: https://lkml.kernel.org/r/aDbFuUTlJTBqziVd@stanley.mountain
Fixes: bd23f293a0d5 ("tools/testing: add PROCMAP_QUERY helper functions in mm self tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: levi.yun <yeoreum.yun@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The hugetlb fix introduced in commit ee40c9920ac2 ("mm: fix copy_vma()
error handling for hugetlb mappings") mistakenly did not provide a stub
for the VMA userland testing, which results in a compile error when trying
to build this.
Provide this stub to resolve the issue.
Link: https://lkml.kernel.org/r/20250528-fix-vma-test-v1-1-c8a5f533b38f@oracle.com
Fixes: ee40c9920ac2 ("mm: fix copy_vma() error handling for hugetlb mappings")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When unregistering the signal handler, we have to pass SIG_DFL, and
blindly reading from PFN 0 and PFN 1 seems to be problematic on !x86
systems. In particularly, on arm64 tx2 machines where noting resides at
these physical memory locations, we can generate RAS errors.
Let's fix it by scanning /proc/iomem for actual "System RAM".
Link: https://lkml.kernel.org/r/20250528195244.1182810-1-david@redhat.com
Fixes: 2616b370323a ("selftests/mm: add simple VM_PFNMAP tests based on mmap'ing /dev/mem")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/232960c2-81db-47ca-a337-38c4bce5f997@arm.com/T/#u
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The madv_populate selftest has some repetitive code for several different
cases that it covers, included repeated test names used in
ksft_test_result() reports. This causes problems for automation, the test
name is used to both track the test between runs and distinguish between
multiple tests within the same run. Fix this by tweaking the messages
with duplication to be more specific about the contexts they're in.
Link: https://lkml.kernel.org/r/20250522-selftests-mm-madv-populate-dedupe-v1-1-fd1dedd79b4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running hugevm tests in a machine without kernel config present,
e.g., a VM running a kernel without CONFIG_IKCONFIG_PROC nor
/boot/config-*, skip hugevm tests, which reads kernel config to get page
table level information.
Link: https://lkml.kernel.org/r/20250516132938.356627-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Adam Sindelar <adam@wowsignal.io>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Skip mm selftests instead when kernel features are not
present", v2.
Two guard_regions tests on userfaultfd fail when userfaultfd is not
present. Skip them instead.
hugevm test reads kernel config to get page table level information and
fails when neither /proc/config.gz nor /boot/config-* is present. Skip it
instead.
This patch (of 2):
When userfaultfd is not compiled into kernel, userfaultfd() returns -1,
causing guard_regions.uffd tests to fail. Skip the tests instead.
Link: https://lkml.kernel.org/r/20250516132938.356627-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250516132938.356627-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Adam Sindelar <adam@wowsignal.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The thuge-gen test program runs mmap() and shmget() tests for both every
available page size and the default page size, resulting in two tests for
the default size. These tests are distinct since the flags in the default
case do not specify an explicit size, add the flags to the test name that
is logged to deduplicate.
Link: https://lkml.kernel.org/r/20250515-selfests-mm-thuge-gen-dup-v1-1-057d2836553f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The mlock2-tests test_mlock_lock() test reports two test results with an
identical string, one reporitng if it successfully locked a block of
memory and another reporting if the lock is still present after doing an
unlock (following a similar pattern to other tests in the same program).
This confuses test automation since the test string is used to deduplicate
tests, change the post unlock test to report "Unlocked" instead like the
other tests to fix this.
Link: https://lkml.kernel.org/r/20250515-selftest-mm-mlock2-dup-v1-1-963d5d7d243a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
|
|
The newly added anon_inode_test test fails to build due to attempting to
include a nonexisting overlayfs/wrapper.h:
anon_inode_test.c:10:10: fatal error: overlayfs/wrappers.h: No such file or directory
10 | #include "overlayfs/wrappers.h"
| ^~~~~~~~~~~~~~~~~~~~~~
This is due to 0bd92b9fe538 ("selftests/filesystems: move wrapper.h out
of overlayfs subdir") which was added in the vfs-6.16.selftests branch
which was based on -rc5 and did not contain the newly added test so once
things were merged into mainline the build started failing - both parent
commits are fine.
Fixes: 3e406741b1989 ("Merge tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Dropping symbols also meant the callchain maps wasn't populated, but
the callchain map is needed to find the DSO.
Plumb the symbols option better, falling back to thread__find_map()
rather than thread__find_symbol() when symbols are disabled.
Fixes: 02b2705017d2e5ad ("perf callchain: Allow symbols to be optional when resolving a callchain")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Graham Woodward <graham.woodward@arm.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Krzysztof Łopatowski <krzysztof.m.lopatowski@gmail.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Levi Yun <yeoreum.yun@arm.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <martin.liska@hey.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matt Fleming <matt@readmodwrite.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Steve Clevenger <scclevenger@os.amperecomputing.com>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Veronika Molnarova <vmolnaro@redhat.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Cc: Zhongqiu Han <quic_zhonhan@quicinc.com>
Cc: Zixian Cai <fzczx123@gmail.com>
Link: https://lore.kernel.org/r/20250529044000.759937-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Delaying kernel operations can be dangerous and the kernel may kill
(non-sleepable) BPF programs running for long in the future.
Limit the max delay to 10ms and update the document about it.
$ sudo ./perf lock con -abl -J 100000us@cgroup_mutex true
lock delay is too long: 100000us (> 10ms)
Usage: perf lock contention [<options>]
-J, --inject-delay <TIME@FUNC>
Inject delays to specific locks
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250515181042.555189-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other
things, update the L4 checksum after reverse SNATing IPv6 packets. That
use case is however not currently supported and leads to invalid
skb->csum values in some cases. This patch adds support for IPv6 address
changes in bpf_l4_csum_update via a new flag.
When calling bpf_l4_csum_replace in Cilium, it ends up calling
inet_proto_csum_replace_by_diff:
1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb,
2: __wsum diff, bool pseudohdr)
3: {
4: if (skb->ip_summed != CHECKSUM_PARTIAL) {
5: csum_replace_by_diff(sum, diff);
6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
7: skb->csum = ~csum_sub(diff, skb->csum);
8: } else if (pseudohdr) {
9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum)));
10: }
11: }
The bug happens when we're in the CHECKSUM_COMPLETE state. We've just
updated one of the IPv6 addresses. The helper now updates the L4 header
checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't.
For an IPv6 packet, the updates of the IPv6 address and of the L4
checksum will cancel each other. The checksums are set such that
computing a checksum over the packet including its checksum will result
in a sum of 0. So the same is true here when we update the L4 checksum
on line 5. We'll update it as to cancel the previous IPv6 address
update. Hence skb->csum should remain untouched in this case.
The same bug doesn't affect IPv4 packets because, in that case, three
fields are updated: the IPv4 address, the IP checksum, and the L4
checksum. The change to the IPv4 address and one of the checksums still
cancel each other in skb->csum, but we're left with one checksum update
and should therefore update skb->csum accordingly. That's exactly what
inet_proto_csum_replace_by_diff does.
This special case for IPv6 L4 checksums is also described atop
inet_proto_csum_replace16, the function we should be using in this case.
This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6,
to indicate that we're updating the L4 checksum of an IPv6 packet. When
the flag is set, inet_proto_csum_replace_by_diff will skip the
skb->csum update.
Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Set distinctive value for failed tests
When running "make check" that performs tests on rtla the failure is
checked by examining the output. Instead have the tool return an
error status if it exceeds the threadhold.
- Define __NR_sched_setattr for LoongArch
Define __NR_sched_setattr to allow this to build for LoongArch.
- Define _GNU_SOURCE for timerlat_bpf.c
Due to modifications of struct sched_attr in utils.h when _GNU_SOURCE
is not defined, this can cause errors for timerlat_bpf_init() and
breakage in BPF sample collection mode.
* tag 'trace-tools-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Define _GNU_SOURCE in timerlat_bpf.c
rtla: Define __NR_sched_setattr for LoongArch
rtla: Set distinctive exit value for failed tests
|
|
The 'rseq' and 'set_robust_list' syscalls don't return a pid, so set
errpid for both to false.
Fixes: 0c1019e3463b263a ("perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space")
Fixes: 1de5b5dcb8353f36 ("perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space")
Signed-off-by: Anubhav Shelat <ashelat@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250529143334.1469669-2-ashelat@redhat.com
[ Remove explicit .errpid = false, omitting its initialization zeroes it, as noted by Namhyung ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
symbol-elf.c is used when building with libelf, symbol-minimal is used
otherwise.
There is no reason the demangling code with no dependencies on libelf is
part of symbol-elf.c so move to symbol.c.
This allows demangling tests to pass with NO_LIBELF=1.
Structurally, while moving the functions rename demangle_sym() to
dso__demangle_sym() which is already a function exposed in symbol.h and
the only purpose of which in symbol-elf.c was to call demangle_sym().
Change the calls to demangle_sym() in symbol-elf.c to calls to
dso__demangle_sym().
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250528210858.499898-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|